|
|
|
Behzad Dehghan Manshadi
|
|
Laboratory of Applied Mechanics and Reliability Analysis
|
|
|
|
BIOGRAPHY
|
Postdoctoral Researcher, Laboratory of Applied Mechanics and Reliability Analysis LMAF, EPFL, Lausanne, Switzerland (2011-)
Ph.D. in Structures, Composite Construction Laboratory CCLAB (http://cclab.epfl.ch), EPFL, Lausanne, Switzerland, (2008-2011)
MS in Structure Division of Aerospace Eng., Sharif University of Technology (SUT), Tehran, Iran (2005-2007)
BS in Aerospace Division of Mechanical Eng., Sharif University of Technology (SUT), Tehran, Iran (1998-2003)
|
|
JOURNAL PAPERS
|
1- Instability of thin-walled GFRP webs in cell-core sandwiches under combined bending and shear loads, Behzad D. Manshadi, Anastasios P. Vassilopoulos, Julia de Castro, Thomas Keller, Thin-Walled Structures, 2012, doi:10.1016/j.tws.2011.12.021.
2- Modeling of buckling and wrinkling behavior in GFRP plates and sandwiches subjected to biaxial compression-tension load,Behzad D. Manshadi, Anastasios P. Vassilopoulos, Julia de Castro, Thomas Keller, ASCE's Journal of Composites for Construction, December 20, 2011, accepted, doi:10.1061/(ASCE)CC.1943-5614.0000277.
3- Contribution to shear wrinkling of GFRP webs in cell-core sandwiches,Behzad D. Manshadi, Anastasios P. Vassilopoulos, Julia de Castro, Thomas Keller, ASCE's Journal of Composites for Construction 15(5) pp. 833-840, 2011.
4- Shear buckling resistance of GFRP plate girders, Behzad D. Manshadi, Anastasios P. Vassilopoulos, Thomas Keller, ASCE's Journal of Composites for Construction 15(3) pp. 431-440, 2011.
5- Thermomechanical behavior of multifunctional GFRP sandwich structures with encapsulated photovoltaic cells, Thomas Keller, Anastasios P. Vassilopoulos, Behzad D. Manshadi, ASCE's Journal of Composites for Construction 14(4) pp. 470-478, 2010.
6- A computational tool for the life prediction of GFRP laminates under irregular complex stress states: influence of the fatigue failure criterion, Anastasios P. Vassilopoulos, Roohollah Sarfaraz, Behzad D. Manshadi, Thomas Keller, Computational Materials Science 49(3) pp. 483-491, 2010.
7- Piecewise non-linear constant life diagram formulation for FRP composite materials, Anastasios P. Vasilopoulos, Behzad D. Manshadi, Thomas Keller, International Journal of Fatigue 32(10) pp. 1731–1738, 2010.
8- Influence of the constant life diagram formulation on the fatigue life prediction of composite materials, Anastasios P. Vasilopoulos, Behzad D. Manshadi, Thomas Keller, International Journal of Fatigue 32(4) pp. 659–669, 2010.
9- Introducing a novel method for materials selection in mechanical design using Z-transformation in statistics for normalization of material properties, K. Fayazbakhsh, A. Abedian, B. Dehghan Manshadi, R. Sarfaraz Khabbaz, Materials & Design 30(10) pp. 4396-4404, December 2009.
10- Nonlinear analysis of FGM plates under pressure loads using the higher-order shear deformation theories, R. Sarfaraz Khabbaz, B. Dehghan Manshadi, A. Abedian, Composite Structures 89(3), pp. 333-496, July 2009.
11- A Simplified Fuzzy Logic Approach for Materials Selection in Mechanical Engineering Design, R. Sarfaraz Khabbaz, B. Dehghan Manshadi, A. Abedian, R. Mahmudi, Materials & Design 30(3) pp. 687-697, March 2009.
12- A Novel Method for Materials Selection in Mechanical Design: Combination of Non-Linear Normalization and a Modified Digital Logic Method, B. Dehghan-Manshadi, H. Mahmudi, A. Abedian, R. Mahmudi, Materials & Design 28(1) pp. 8-15, 2007.
13- An Introduction to a New Criterion Proposed for Stopping GA Optimization Process of a Laminated Composite Plate, A. Abedian, M. H. Ghiasi, B. Dehghan-Manshadi, Journal of Aerospace Science and Technology (JAST) 3(4) pp. 167-176, 2007.
14- Effects of a Linear-Exponential Penalty Function on the GA’s Efficiency in Optimization of a Laminated Composite Panel, M. H. Ghiasi, B. Dehghan-Manshadi, A. Abedian, International Journal of Computational Intelligent (IJCI) 2 pp. 5-11, 2005.
|
|
CONFERENCE PAPERS
|
1- Shear Wrinkling in Glass Fiber-Reinforced Polymer Sandwiches, Behzad D. Manshadi, Anastasios P. Vassilopoulos, Julia de Castro, Thomas Keller, 9th International Conference on Sandwich Structures ICSS–9, California Institute of Technology, Pasadena, California, USA (June 14-16, 2010).
2- PNL Constant Life Diagram Formulation for FRP Composite Materials,Anastasios P. Vassilopoulos, Behzad D. Manshadi, Thomas Keller, 14th European Conference on Composite Materials ECCM–14, Budapest, Hungary (June 7-10, 2010).
3- Shear Buckling of GFRP Beam Webs, Behzad D. Manshadi, Anastasios P. Vassilopoulos, Thomas Keller, 5th International Conference on FRP Composites in Civil Engineering CICE–2010, Beijing, China (September 27-29, 2010).
4- Shear Wrinkling of GFRP Webs in Cell-Core Sandwiches, Behzad D. Manshadi, Anastasios P. Vassilopoulos, Julia de Castro, Thomas Keller, 5th International Conference on FRP Composites in Civil Engineering CICE–2010, Beijing, China (September 27-29, 2010).
5- A computational tool for the fatigue life prediction of composite materials, B.D. Manshadi, A.P. Vassilopoulos, T. Keller, In: Proceedings of the 2nd International conference on material and component performance under variable amplitude loading, pp. 585-594, Darmstadt, Germany (March 2009).
6- Materials Selection for Spar of a Human Powered Aircraft (HPA) Using a Simplified Fuzzy Logic Approach, R. Sarfaraz Khabbaz, B. Dehghan Manshadi, A. Abedian, R. Mahmudi , 7th Iranian Aerospace Society Conference, Vol. 2, pp. 55-56, Sharif University of Technology, Tehran, Iran (February 2008).
7- GA Optimization of Straight and Curved Laminated Composites in Presence of a Cutout, A. Gorjipoor, B. Dehghan-Manshadi, A. Abedian, 1st CEAS European Air and Space Conference, Berlin, Germany (September 2007).
8- Using Genetic Algorithm in Shape Optimization of Front Axle Bump Stop for a New Pickup Vehicle (ZAMYAD-24F), M. Shafigh, B. Dehghan-Manshadi, B. Khosravi, 9th International Conference on Computer Aided Optimum Design in Engineering OPTI’2005 (WIT Transactions), Vol. 80, pp. 311-320, Skiathos, Greece (May 2005).
9- Comparison of Static and Dynamic Penalty Factors on Efficiency of GA in Optimization of Stiffened Composite Panels, A. Abedian, M. H. Ghiasi, B. Dehghan-Manshadi, 8th International & 12th Annual Mechanical Engineering Conference ISME’2004, Tehran, Iran (May 2004).
10- Influence of External Penalty Functions in Optimization of Stiffened Composite Panels Using Genetic Algorithm, A. Abedian, M. H. Ghiasi, B. Dehghan-Manshadi, 2nd International & 5th National Conference of Aerospace Engineering AERO’2004, pp. 351-360, Isfahan, Iran (February 2004).
11- Application of Genetic Algorithms (GAs) to the Design of Laminated Composite, A. Abedian, M. H. Ghiasi, B. Dehghan-Manshadi, 7th International & 11th Annual Conference of Mechanical Engineering ISME’2003, Vol. 6, pp. 402-409, Mashhad, Iran (May 2003).
12- Prediction of Ultimate Load Carrying Capacity of Nissan Junior Axle Beam Using Elasto-Plastic Analysis Procedure, M. Daghigh, B. Dehghan-Manshadi, 5th International & 9th Annual Conference of Mechanical Engineering ISME’2001, Vol. 4, pp. 45-52, Tehran, Iran (May 2001).
13- Plane-Strain Tension Testing of Sheet Metals, R. Mahmudi, B. Dehghan-Manshadi, H. Mahmudi, 9th Amsler Symposium "World of Dynamic Testing", Vol. 4, pp. 67-76, Gottmadingen, Germany (May 2001).
14- Materials Selection for the Wing Structure of a Human Powered Aircraft (HPA), H. Mahmudi, B. Dehghan-Manshadi, R. Mahmudi, 1st International & 3rd Biennial Conference of Aerospace Engineering AERO’2000, Vol. 3, pp. 1405-1413, Tehran, Iran (January 2000).
|
|
Postdoctoral Researcher