Anastasios Vassilopoulos
EPFL ENAC IIC GR-MEC
BP 2122 (Bâtiment BP)
Station 16
1015 Lausanne
+41 21 693 63 93
Office: BP 2122
EPFL › ENAC › IIC › GR-MEC
Site web: https://www.epfl.ch/labs/gr-mec/
EPFL ENAC IIC GIS-GE
GC B3 484 (Bâtiment GC)
Station 18
1015 Lausanne
+41 21 693 63 93
Office: GC B2 425
EPFL › ENAC › IIC › GIS-GE
Site web: https://www.epfl.ch/schools/enac/gis/
+41 21 693 63 93
EPFL › VPA › VPA-AVP-DLE › AVP-DLE-EDOC › EDCE-GE
Site web: https://go.epfl.ch/phd-edce
+41 21 693 63 93
EPFL › VPA › VPA-AVP-DLE › AVP-DLE-EDOC › CDOCT
+41 21 693 63 93
EPFL › ENAC › ENAC-DEC › CF-ENAC
+41 21 693 63 93
EPFL › ENAC › ENAC-SGC › SGC-ENS
Publications représentatives
Effect of thermal lag on glass transition temperature of polymers measured by DMA
Sun, Wei; Vassilopoulos, Anastasios P.; Keller, Thomas
Published in International Journal of Adhesion and Adhesives, 2014;52:31-39 in
A total fatigue life model for the prediction of the R-ratio effects on fatigue crack growth of adhesively-bonded pultruded GFRP DCB joints
Moslem Shahverdi, Anastasios P. Vassilopoulos, Thomas Keller
Published in Composites Part A: Applied Science and Manufacturing, 2012;43(10):1783-1790 in
Experimental investigation and modeling of mean load effect on fatigue behavior of adhesively-bonded pultruded GFRP joints
Roohollah Sarfaraz, Anastasios P. Vassilopoulos, Thomas Keller
Published in International Journal of Fatigue, 2012;44:245-252 in
Influence of the constant life diagram formulation on the fatigue life prediction of composite materials
Anastasios P. Vassilopoulos, Behzad D. Manshadi, Thomas Keller
Published in International Journal of Fatigue, 2010;32(4):659-669 in
Artificial neural networks in spectrum fatigue life prediction of composite materials
Anastasios P. Vassilopoulos, Efstratios F. Georgopoulos, Vasileios Dionysopoulos
Published in International Journal of Fatigue, 2007;29(1):20-29 in
Life prediction methodology for GFRP laminates under spectrum loading
Theodore P. Philippidis, Anastasios P. Vassilopoulos
Published in Composites Part A: Applied Science and Manufacturing,2004;35(6):657-666 in
Fatigue Strength Prediction under Multiaxial Stress
Theodore P. Philippidis, Anastasios P. Vassilopoulos
Published in Journal of Composite Materials, 1999;33(17):1578-1599 in
Infoscience
Automated crack propagation detection in adhesively bonded composite joints with Digital Image Correlation techniques
Composites Part B: Engineering. 2026. DOI : 10.1016/j.compositesb.2025.113113.Transfer learning-based approach for evaluating residual stiffness in carbon fiber reinforced composites and adhesives
Engineering Applications of Artificial Intelligence. 2025. DOI : 10.1016/j.engappai.2025.111624.On the fatigue behavior of thin and thick adhesively bonded composite joints
International Journal of Fatigue. 2025. DOI : 10.1016/j.ijfatigue.2025.109065.A new equivalent crack length technique for mode I fracture of adhesively bonded joints
Composites Part B: Engineering. 2025. DOI : 10.1016/j.compositesb.2025.112733.A conditional diffusion model-based data augmentation method for structural health monitoring of composites
Mechanical Systems and Signal Processing. 2025. DOI : 10.1016/j.ymssp.2025.113155.Toughening of thick bonded interfaces through architected crack-arresting features
Composites Part A: Applied Science and Manufacturing. 2025. DOI : 10.1016/j.compositesa.2024.108575.Standard specimen geometries do not always lead to consistent fatigue results for epoxy adhesives
International Journal of Fatigue. 2025. DOI : 10.1016/j.ijfatigue.2024.108600.Combined computational-experimental investigation of residual stresses and pre-cracking in mode I behaviour of thick adhesively bonded GFRP composite joints
Composite Structures. 2025. DOI : 10.1016/j.compstruct.2024.118549.Healable adhesive paste development for thick adhesive joints
CONSTRUCTION AND BUILDING MATERIALS. 2024. DOI : 10.1016/j.conbuildmat.2024.138533.A generalized machine learning framework to estimate fatigue life across materials with minimal data
Materials and Design. 2024. DOI : 10.1016/j.matdes.2024.113355.Behavior of CFRP composites and epoxy adhesives after long-term exposure to outdoor and laboratory-controlled environments
Construction and Building Materials. 2024. DOI : 10.1016/j.conbuildmat.2024.137201.Void content and displacement ratio effects on fatigue crack growth in thick adhesively bonded composite joints under constant amplitude loading
International Journal of Fatigue. 2024. DOI : doi.org/10.1016/j.ijfatigue.2024.108508.An experimental and analytical study of mode I fracture and crack kinking in thick adhesive joints
Composites Part B: Engineering. 2024. DOI : 10.1016/j.compositesb.2024.111695.Mode-I Fracture Analysis of thick Advanced Joints Toughened With Thermoplastic Layers
2024. 21st European Conference on Composite Materials, Nantes, France, 2024-07-02 - 2024-07-05.Experimental and numerical investigation of an additively manufactured sandwich composite bridge deck utilizing gyroid building blocks
Composite Structures. 2024. DOI : doi.org/10.1016/j.compstruct.2024.118304.Combining X-ray micro-CT and microscopy-based images of two lianas species to derive structural, mechanical and functional relationships
Plant Systematics And Evolution. 2024. DOI : 10.1007/s00606-024-01889-z.Numerical investigation of two-dimensional Mode-II delamination in composite laminates
9th International Conference on Fracture of Polymers, Composites and Adhesives, Les Diablerets, Switzerland, 24-27 March 2024.Damage-tolerant behavior of structural epoxies with thin PEI and PVDF interlayers
Materials & Design. 2024. DOI : 10.1016/j.matdes.2024.112843.Numerical investigation of two-dimensional Mode-II delamination in composite laminates
Composites Part A: Applied Science and Manufacturing. 2024. DOI : 10.1016/j.compositesa.2024.108012.Influence of Thermoplastic Interlayers on Fatigue Crack Growth in Epoxy Materials
2024. 21st European Conference on Composite Materials, Nantes, France, 2024-07-02 - 2024-07-05.Improved Material Formulations for Thick Adhesive Joints in Wind Turbine Blades
Lausanne, EPFL, 2024. DOI : 10.5075/epfl-thesis-10883.Crack Arresting Strategies for Wind Turbine Blade Adhesive Joints
Lausanne, EPFL, 2024. DOI : 10.5075/epfl-thesis-11028.Two-dimensional quasi-static delamination in composite laminates under Mode-I and Mode-II conditions
Lausanne, EPFL, 2024. DOI : 10.5075/epfl-thesis-10535.Mode I fracture of thick adhesively bonded GFRP composite joints for wind turbine rotor blades
Composite Structures. 2024. DOI : 10.1016/j.compstruct.2023.117705.Fatigue dataset of hybrid non-toughened and toughened epoxy adhesives
Data In Brief. 2023. DOI : 10.1016/j.dib.2023.109862.Experimental investigation of two-dimensional Mode-II delamination in composite laminates
Composites Part A: Applied Science and Manufacturing. 2023. DOI : 10.1016/j.compositesa.2023.107666.CRACK SHIELDING MECHANISMS OF INTERLAYERED EPOXY MATERIALS UNDER QUASI-STATIC AND FATIGUE LOADING
2023. ICCM23 International Conference on Composite Materials, Belfast, Ireland, 30 July-4 August, 2023.INFLUENCE OF VOIDS ON THICK DCB JOINT BEHAVIOR
2023. ICCM23 International Conference on Composite Materials, Belfast, North Ireland, 30 July-4 August, 2023.THE EFFECT OF FATIGUE DAMAGE ON VISCOELASTIC PROPERTIES OF ANGLE PLY GFRP LAMINATES
ICCM23 International Conference on Composite Materials, Belfast, Ireland, July 30-August 4, 2023.Static and Fatigue Performance of Wind Turbine Blade Epoxy Adhesives
CompTest 2023 11th International Conference on Composite Testing and Model Identification, Girona, Spain, May 31-June 2, 2023.INFLUENCE OF VOIDS ON THICK DCB JOINT BEHAVIOR
CompTest 2023 11th International Conference on Composite Testing and Model Identification, Girona, Spain, May 31-June 2, 2023.Effects of core air gaps and steel inserts on thermomechanical response of GFRP-balsa sandwich panels subjected to fire
Composite Structures. 2023. DOI : 10.1016/j.compstruct.2023.116924.CT scanning and machine learning in fatigue life analysis of structural adhesives
2023Dataset for the hybrid non-toughened and toughened epoxy adhesive properties
Data In Brief. 2023. DOI : 10.1016/j.dib.2023.108912.Floating platform for a wind turbine
WO2023046586 . 2023.Fatigue performance of wind turbine rotor blade epoxy adhesives
Polymer Testing. 2023. DOI : 10.1016/j.polymertesting.2023.107975.TWO-DIMENSIONAL MODE-II DELAMINATION GROWTH IN COMPOSITE LAMINATES
2023. The 23rd International Conference on Composites Materials (ICCM 23), Belfast, Northern Ireland, July 30 - August 4, 2023.Fatigue behavior and life prediction of wind turbine blade composite materials
Advances in Wind Turbine Blade Design and Materials (2nd edition); Cambridge, MA: Woodhead Publishing (Elsevier), 2023.Manufacturing and toughening effects on the material properties of wind turbine blade adhesives
Polymer Testing. 2022. DOI : 10.1016/j.polymertesting.2022.107770.Effects of core air gaps and steel inserts on thermal response of GFRP-balsa sandwich panels subjected to fire
Fire Safety Journal. 2022. DOI : 10.1016/j.firesaf.2022.103703.Probabilistic fatigue model for composites based on the statistical characteristics of the cycles to failure
International Journal Of Fatigue. 2022. DOI : 10.1016/j.ijfatigue.2022.107085.Fatigue life modeling of GFRP composites considering viscoelastic behavior
EDCE Research Day, EPFL, Lausanne, Switzerland, 12.09.2022.The challenges of quasi-static and fatigue experiments of structural adhesives
International Journal Of Fatigue. 2022. DOI : 10.1016/j.ijfatigue.2022.106980.Thermophysical properties of balsa wood used as core of sandwich composite bridge decks exposed to external fire
Construction And Building Materials. 2022. DOI : 10.1016/j.conbuildmat.2022.127164.Isogeometric Kirchhoff-Love shell patches in free and forced vibration of sinusoidally corrugated FG carbon nanotube-reinforced composite panels
Thin-Walled Structures. 2022. DOI : 10.1016/j.tws.2021.108707.Cyclic Behaviour of Unidirectional Hybrid Interlayer Glass/Carbon and Carbon/Carbon Composites
2022. 10th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE), Istanbul, TURKEY, Dec 08-10, 2021. p. 2435 - 2445. DOI : 10.1007/978-3-030-88166-5_211.Investigation of bamboo nodes structural characteristics with X-ray micro-CT imaging
2022. 20th European Conference on Composite Materials - Composites Meet Sustainability, EPFL, Lausanne, June 26-30, 2022.Quasi-static and fatigue performance of non toughened and toughened adhesives for wind turbine blades
2022. 20th European Conference on Composite Materials - Composites Meet Sustainability, EPFL, Lausanne, June 26-30, 2022.Testing mechanical performance of adhesively bonded composite joints in engineering applications: an overview
Journal Of Adhesion. 2022. DOI : 10.1080/00218464.2021.1953479.Clip connector device and uses thereof
WO2022162455 ; EP4036423 . 2022.Investigation of bulk adhesive material and thick adhesive joints for wind turbine applications
2022. 20th European Conference on Composite Materials - Composites Meet Sustainability, EPFL, Lausanne, June 26-30, 2022. p. 129 - 136.Creep-fatigue interaction damage model for GFRP laminates based on thermodynamics
2022. 20th European Conference on Composite Materials - Composites Meet Sustainability, EPFL, Lausanne, June 26-30, 2022. p. 783 - 790.Probabilistic fatigue life model of composite laminas under cycle loading
2022. 20th European Conference on Composite Materials - Composites Meet Sustainability (ECCM 20), EPFL, Lausanne, Suisse, June 26-30, 2022. p. 830 - 837.Proceedings of the 20th European Conference on Composite Materials - Composites Meet Sustainability (Vol 1-6)
2022. ECCM20 - The 20th European Conference on Composite Materials.Fire performance evaluation of GFRP-balsa sandwich bridge decks
Lausanne, EPFL, 2022. DOI : 10.5075/epfl-thesis-9364.Data management and modelling of composite materials fatigue behavior
2021The Challenges of Testing Adhesives - Effects of imperfections, grip pressure, specimen shape and frequency in quasi-static and fatigue loading
2021Review of hybrid composites fatigue
Composite Structures. 2021. DOI : 10.1016/j.compstruct.2021.114358.Numerical modeling of two-dimensional delamination growth in composite laminates with in-plane isotropy
Engineering Fracture Mechanics. 2021. DOI : 10.1016/j.engfracmech.2021.107787.A 3D printed bio-composite removable connection system for bamboo spatial structures
Composite Structures. 2021. DOI : 10.1016/j.compstruct.2021.114047.Design of Composite Stairway
2021Tension-tension fatigue behavior of hybrid glass/carbon and carbon/carbon composites
International Journal of Fatigue. 2021. DOI : 10.1016/j.ijfatigue.2021.106143.Review of fatigue of bulk structural adhesives and thick adhesive joints
International Materials Reviews. 2021. DOI : 10.1080/09506608.2020.1845110.Fabrication and curing conditions effects on the fatigue behavior of a structural adhesive
International Journal of Fatigue. 2020. DOI : 10.1016/j.ijfatigue.2020.105743.Mechanical properties of a balsa wood veneer structural sandwich core material
Construction and Building Materials. 2020. DOI : 10.1016/j.conbuildmat.2020.120193.The history of fiber-reinforced polymer composite laminate fatigue
International Journal Of Fatigue. 2020. DOI : 10.1016/j.ijfatigue.2020.105512.Design of a light-shaping adaptive facade using fiber-reinforced polymer materials
2020Fatigue Characterization of a structural adhesive
2020Thermomechanical characterization of a balsa-wood-veneer structural sandwich core material at elevated temperatures
Construction And Building Materials. 2020. DOI : 10.1016/j.conbuildmat.2019.117037.Experimental investigation of mesoscale variability of clear spruce mechanical properties in the radial direction
Construction and Building Materials. 2020. DOI : 10.1016/j.conbuildmat.2020.121401.Influence of curved delamination front on R-curve of DCB specimen
Composite Structures. 2019. DOI : 10.1016/j.compstruct.2019.111311.Fatigue life prediction under realistic loading conditions
Fatigue Life Prediction of Composites and Composite Structures 2nd Edition; Elsevier, 2019. p. 387 - 423.Computational tools for the fatigue life modeling and prediction of composite materials and structures
Fatigue Life Prediction of Composites and Composite Structures 2nd Edition; Elsevier, 2019. p. 635 - 680.Creep/fatigue/relaxation of angle-ply GFRP composite laminates
Fatigue Life Prediction of Composites and Composite Structures 2nd Edition; Elsevier, 2019.Fatigue life modeling and prediction methods for composite materials and structures—Past, present, and future prospects
Fatigue Life Prediction of Composites and Composite Structures 2nd Edition; Elsevier, 2019. p. 1 - 43.Computational intelligence methods for the fatigue life modeling of composite materials
Fatigue Life Prediction of Composites and Composite Structures 2nd Edition; Elsevier, 2019. p. 349 - 383.Stress ratio effect on tension-tension fatigue behavior of angle-ply GFRP laminates
International Journal Of Fatigue. 2019. DOI : 10.1016/j.ijfatigue.2019.04.037.Modeling of fatigue behavior based on interaction between time- and cyclic-dependent mechanical properties
Composites Part A: Applied Science and Manufacturing. 2019. DOI : 10.1016/j.compositesa.2019.05.037.Two-dimensional fatigue debonding in GFRP/balsa sandwich panels
International Journal Of Fatigue. 2019. DOI : 10.1016/j.ijfatigue.2019.03.032.Creep effects on tension-tension fatigue behavior of angle-ply GFRP composite laminates
International Journal of Fatigue. 2019. DOI : 10.1016/j.ijfatigue.2019.02.010.Two-dimensional quasi-static debonding in GFRP/balsa sandwich panels
Composite Structures. 2019. DOI : 10.1016/j.compstruct.2019.02.077.Numerically-based method for fracture characterization of Mode I-dominated two-dimensional delamination in FRP laminates
Composite Structures. 2019. DOI : 10.1016/j.compstruct.2019.02.014.Design of a light-shaping kinetic facade using FRP materials
2019Shaping light to influence occupants’ experience of space: a kinetic shading system with composite materials
2019. CISBAT 2019, Lausanne, Switzerland, September 4-6, 2019. DOI : 10.1088/1742-6596/1343/1/012162.Fatigue life prediction of composites and composite structures - second edition
Woodhead Publishing, 2019.Two-dimensional crack growth in FRP laminates and sandwich panels
Lausanne, EPFL, 2019. DOI : 10.5075/epfl-thesis-9421.Design of a light-shaping adaptive facade using fiber-reinforced polymer materials
2019Temperature effect on fatigue behavior of basalt fiber-reinforced polymer composites
Polymer Composites. 2019. DOI : 10.1002/pc.25035.Load history effects in fibre-reinforced polymer composite materials
Lausanne, EPFL, 2019. DOI : 10.5075/epfl-thesis-9384.Experimental investigation of two-dimensional delamination in GFRP laminates
Engineering Fracture Mechanics. 2018. DOI : 10.1016/j.engfracmech.2018.05.015.Finite element analysis of initial imperfection effects on kinking failure of unidirectional glass fiber-reinforced polymer composites
Composite Structures. 2018. DOI : 10.1016/j.compstruct.2018.07.010.Two-dimensional crack propagation in GFRP laminates: Experimental investigation
2018. 9th International Conference on FRP Composites in Civil Engineering, CICE2018, Paris, France, July 17-19, 2018.Numerical simulation of two-dimensional crack propagation
2018. 18th European Conference on Composite Materials, Athens, Greece, June 24-28, 2018.Effects of load interruption on the fatigue life of GFRP composites
2018. 18th European Conference on Composite Materials, Athens, Greece, 24-28 June, 2018.Effect of Loading Pattern on Fatigue Behavior of Laminated Composites
2018. 18th International conference of experimental mechanics, Brussels, Belgium, July 1-5, 2018. DOI : 10.3390/ICEM18-05321.Novel experimental design for two-dimensional delamination in FRP laminates
2018. 18th International conference of experimental mechanics, Brussels, Belgium, July 1-5, 2018. DOI : 10.3390/ICEM18-05283.Load transfer mechanisms in CFRP ground anchors with multi-strap ends
Composite Structures. 2018. DOI : 10.1016/j.compstruct.2017.09.111.Mixed-mode quasi-static fracture behavior of GFRP/balsa sandwiches
2018. 12th International Conference on Sandwich Structures ICSS-12, Lausanne, Switzerland, August 19-22, 2018. p. 232 - 234. DOI : 10.5075/epfl-ICSS12-2018-232-234.Design of a Fiberglass Skateboard
2018Mechanical properties of a Balsa wood veneer core material at elevated temperatures
2018. 12th International Conference on Sandwich Structures ICSS-12, Lausanne, Switzerland, August 19-22, 2018. p. 254 - 256. DOI : 10.5075/epfl-ICSS12-2018-254-256.2D quasi-static delamination in GFRP laminates: numerical investigation
2018. 12th International Conference on Sandwich Structures ICSS-12, Lausanne, Switzerland, August 19-22, 2018. p. 133 - 135. DOI : 10.5075/epfl-ICSS12-2018-133-135.2D quasi-static delamination in GFRP laminates: experimental investigation
2018. 12th International Conference on Sandwich Structures ICSS-12, Lausanne, Switzerland, August 19-22, 2018. p. 130 - 132. DOI : 10.5075/epfl-ICSS12-2018-130-132.Development of physical and mechanical properties of a cold-curing structural adhesive in a wet bridge environment
2017. 5th International Conference on Durability of Fiber Reinforced Polymer (FRP) Composites for Construction and Rehabilitation of Structures CDCC 2017, Sherbrooke, Canada, July 19-21, 2017. p. 129 - 135.Ductility of adhesively bonded timber joints
2017. 1st International Conference on Timber Structures and Engineering, New Forest, UK, June 13-15, 2017. p. 917 - 927. DOI : 10.2495/CMEM-V5-N6-917-927.Two-dimensional analytical stress distribution model for unbalanced FRP composite single-lap joints
European Journal of Mechanics A-Solids. 2017. DOI : 10.1016/j.euromechsol.2017.07.011.Structural performance of permanent post-tensioned CFRP ground anchors with strap ends
Lausanne, EPFL, 2017. DOI : 10.5075/epfl-thesis-7923.Ductility, recovery and strain rate dependency of an acrylic structural adhesive
Construction and Building Materials. 2017. DOI : 10.1016/j.conbuildmat.2017.02.101.Are Standardized Lightning Current Waveforms Suitable for Aircraft and Wind Turbine Blades Made of Composite Materials?
IEEE Transactions on Electromagnetic Compatibility. 2017. DOI : 10.1109/TEMC.2017.2682324.Durability and fatigue performance of a typical cold-curing structural adhesive in bridge construction
Lausanne, EPFL, 2017. DOI : 10.5075/epfl-thesis-7935.Development of physical and mechanical properties of a cold-curing structural adhesive in a dry bridge environment
2017. 5th International Conference on Durability of Fiber Reinforced Polymer (FRP) Composites for Construction and Rehabilitation of Structures CDCC 2017, Sherbrooke, Canada, July 19-21, 2017. p. 427 - 434.Pull-out behavior of CFRP ground anchors with two-strap ends
Composite Structures. 2017. DOI : 10.1016/j.compstruct.2016.10.048.Evaluation of grout materials for CFRP ground anchors with strap ends
Construction and Building Materials. 2017. DOI : 10.1016/j.conbuildmat.2017.04.002.Fracture mechanics-based progressive damage modelling of adhesively bonded fibre-reinforced polymer joints
Fatigue & Fracture of Engineering Materials & Structures. 2017. DOI : 10.1111/ffe.12647.Displacement rate and structural effects on Poisson ratio of a ductile structural adhesive in tension and compression
International Journal of Adhesion and Adhesives. 2017. DOI : 10.1016/j.ijadhadh.2017.06.008.Ductility and strain rate-dependency of adhesively-bonded timber joints
Lausanne, EPFL, 2017. DOI : 10.5075/epfl-thesis-7838.Fatigue performance of a cold-curing structural epoxy adhesive subjected to moist environments
International Journal of Fatigue. 2017. DOI : 10.1016/j.ijfatigue.2017.06.022.Pull-Out Behavior of CFRP Single-Strap Ground Anchors
Journal of Composites for Construction. 2017. DOI : 10.1061/(Asce)Cc.1943-5614.0000760.Effects of aging in dry environment on physical and mechanical properties of a cold-curing structural epoxy adhesive for bridge construction
Construction and Building Materials. 2017. DOI : 10.1016/j.conbuildmat.2017.02.063.Development of physical and mechanical properties of a cold-curing structural adhesive in a wet bridge environment
Construction and Building Materials. 2017. DOI : 10.1016/j.conbuildmat.2017.03.145.On the adequacy of standardized lightning current waveform for composite structures for aircraft and wind turbine blades
2016. EMC 2016, The IEEE International Symposium on Electromagnetic Compatibility, Ottawa, Canada, 25-29 July, 2016. p. 289 - 292. DOI : 10.1109/ISEMC.2016.7571660.Effect of Natural Weathering on Durability of Pultruded Glass Fiber-Reinforced Bridge and Building Structures
Journal of Composites for Construction. 2016. DOI : 10.1061/(Asce)Cc.1943-5614.0000589.Pull-out behavior of CFRP ground anchors with two-strap ends
2016. CICE 2016, The 8th International Conference on FRP Composites in Civil Engineering, Hong Kong China, December 14-16, 2016. p. 129 - 135.Behaviour of composite sandwich decks at high temperatures
2016Stochastic analysis of clear timber as a structural material
Lausanne, EPFL, 2016. DOI : 10.5075/epfl-thesis-6944.The statistical variability and length effects in the tensile transverse behavior of clear timber
2016. WCTE 2016, World Conference on Timber Engineering, Vienna, Austria, August 22-25, 2016.Random field-based modeling of size effect on the longitudinal tensile strength of clear timber
Structural Safety. 2016. DOI : 10.1016/j.strusafe.2015.09.002.Experimental characterization of longitudinal mechanical properties of clear timber: Random spatial variability and size effects
Construction and Building Materials. 2016. DOI : 10.1016/j.conbuildmat.2016.05.109.Post-wrinkling behavior of webs in GFRP cell-core sandwich structures
Composite Structures. 2016. DOI : 10.1016/j.compstruct.2015.11.025.Experimental and numerical investigation of tensile behavior of non-laminated CFRP straps
Composites Part B. 2016. DOI : 10.1016/j.compositesb.2016.01.049.Mixed-Mode I/II fracture behavior of asymmetric composite joints
2016. 21st European Conference on Fracture (ECF), Catania, ITALY, JUN 20-24, 2016. p. 1886 - 1893. DOI : 10.1016/j.prostr.2016.06.237.Long-term behavior of cold-curing structural adhesives in aqueous and alkaline conditions
2015. 3rd International Conference of Structural Adhesives Bonding, Porto, Portugal, 2-3 July 2015.Analytical modeling of mixed-Mode bending behavior of asymmetric adhesively bonded pultruded GFRP joints
Engineering Fracture Mechanics. 2015. DOI : 10.1016/j.engfracmech.2015.08.040.Mixed-mode fatigue and fracture behavior of adhesively-bonded composite joints
Fatigue and Fracture of Adhesively-Bonded Composite Joints; Elsevier, 2015. p. 187 - 223.Predicting the fatigue life of adhesively-bonded structural composite joints
Fatigue and Fracture of Adhesively-Bonded Composite Joints; Woodhead Publishing, 2015. p. 443 - 491.Spatial variability in longitudinal elastic modulus of clear timber
2015. Euromech Colloquium 556, Spatial variability in longitudinal elastic modulus of clear timber, Dresden, Germany, 27 May – 29 May 2015.Experimental investigation of kink initiation and kink band formation in unidirectional glass fiber-reinforced polymer specimens
Composite Structures. 2015. DOI : 10.1016/j.compstruct.2015.04.028.Analytical model of asymmetrical Mixed-Mode Bending test of adhesively bonded GFRP joint
2015. CP2015– 5th International Conference on crack paths, Ferrara, Italy, 16-18 September 2015.Simulating the effect of fiber bridging and asymmetry on the fracture behavior of adhesively-bonded composite joints
Fatigue and Fracture of Adhesively-Bonded Composite Joints; Elsevier, 2015. p. 345 - 367.Optically-derived mechanical properties of glass fiber-reinforced polymer laminates for multifunctional load-bearing structures
Journal of Composite Materials. 2015. DOI : 10.1177/0021998314567696.Time-dependent mechanical behavior of acrylic adhesives
2015. 3rd International Conference of Structural Adhesives Bonding, Porto, Portugal, 2-3 July 2015.Block and variable amplitude fatigue and fracture behavior of adhesively-bonded composite structural joints
Fatigue and Fracture of Adhesively-Bonded Composite Joints; Elsevier, 2015. p. 257 - 287.Temperature effects on material properties and structural response of polymer matrix composites
Lausanne, EPFL, 2015. DOI : 10.5075/epfl-thesis-6674.Effect of temperature on kinking failure mode of non-slender glass fiber-reinforced polymer specimens
Composite Structures. 2015. DOI : 10.1016/j.compstruct.2015.07.054.Physically Based Modeling of Shear Modulus-Temperature Relationship for Thermosets
Polymer Engineering and Science. 2015. DOI : 10.1002/pen.24181.Construction Engineering: Fatigue life prediction of adhesively bonded textile composites
Fatigue of Textile Composites, 1st Edition; Elsevier, 2015. p. 441 - 481.Fatigue and fracture behavior of adhesively-bonded composite structural joints
Fatigue and Fracture of Adhesively-Bonded Composite Joints; Elsevier, 2015. p. 225 - 255.Mode I fatigue and fracture behavior of adhesively-bonded pultruded glass fiber-reinforced polymer (GFRP) composite joints
Fatigue and Fracture of Adhesively-Bonded Composite Joints; Elsevier, 2015. p. 149 - 186.Mixed-Mode I/II fracture behavior of asymmetric adhesively-bonded pultruded composite joints
Engineering Fracture Mechanics. 2014. DOI : 10.1016/j.engfracmech.2013.11.014.An iterative analytical/experimental study of bridging in delamination of the double cantilever beam specimen
Composites Part A: Applied Science and Manufacturing. 2014. DOI : 10.1016/j.compositesa.2014.02.001.MODELING THE PROGRESSIVE DAMAGE OF ADHESIVELY BONDED JOINTS
2014. ECCM16 - 16TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Seville, Spain, 22-26 June 2014.Modeling of axial and shear stresses in multilayer Sandwich beams with stiff core layers
Composite Structures. 2014. DOI : 10.1016/j.compstruct.2014.05.049.Diffuse light transmittance of glass fiber-reinforced polymer laminates for multifunctional load-bearing structures
Journal of Composite Materials. 2014. DOI : 10.1177/0021998313511655.Fatigue and Fracture of Adhesively-Bonded Composite Joints, 1st Edition
Elsevier, 2014.FRP-balsa composite sandwich bridge deck with complex core configuration
2014. CICE2014, The 7th International Conference on FRP Composites in Civil Engineering, Vancouver, Canada, August 20-22, 2014.Thermal performance evaluation of fiber-reinforced polymer thermal breaks for balcony connections
Energy and Buildings. 2014. DOI : 10.1016/j.enbuild.2013.11.070.Fracture in complex balsa cores of fiber-reinforced polymer sandwich structures
Construction and Building Materials. 2014. DOI : 10.1016/j.conbuildmat.2014.08.029.Total light transmittance of GFRP laminates for building construction
2014. CICE2014, The 7th International Conference on FRP Composites in Civil Engineering, Vancouver, Canada, August 20-22, 2014.Static performance in transverse direction of pultruded GFRP bridge decks
2014. CICE2014, The 7th International Conference on FRP Composites in Civil Engineering, Vancouver, Canada, August 20-22, 2014.Analytical modeling of local stresses at Balsa/timber core joints of FRP sandwich structures
Composite Structures. 2014. DOI : 10.1016/j.compstruct.2014.05.050.Effect of thermal lag on glass transition temperature of polymers measured by DMA
International Journal of Adhesion and Adhesives. 2014. DOI : 10.1016/j.ijadhadh.2014.03.009.Mixed-mode quasi-static failure criteria for adhesively-bonded pultruded GFRP joints
Composites Part A: Applied Science and Manufacturing. 2014. DOI : 10.1016/j.compositesa.2013.12.007.Post-wrinkling in GFRP cell-core sandwich webs
2014. CICE2014, The 7th International Conference on FRP Composites in Civil Engineering, Vancouver, Canada, August 20-22, 2014.Structural limits of FRP-balsa sandwich decks in bridge construction
Composites Part B. 2014. DOI : 10.1016/j.compositesb.2014.03.027.Total light transmittance of glass fiber-reinforced polymer laminates for multifunctional load-bearing structures
Journal of Composite Materials. 2014. DOI : 10.1177/0021998313511653.Fatigue life prediction of wind turbine blade composite materials
Advances in wind turbine blade design and materials; Woodhead publishing, 2013. p. 251 - 297.Modeling the constant amplitude fatigue behavior of adhesively bonded pultruded GFRP joints
Journal of Adhesion Science and Technology. 2013. DOI : 10.1080/01694243.2012.727158.Total Light Transmittance of Glass Fiber-Reinforced Polymer Laminates for Multifunctional Load-Bearing Structures
2013. CISBAT 2013, Lausanne, Switzerland, September 4-6, 2013. p. 73 - 78.Mixed-mode fatigue failure criteria for adhesively-bonded pultruded GFRP joints
Composites Part A: Applied Science and Manufacturing. 2013. DOI : 10.1016/j.compositesa.2013.06.017.FRP-Balsa Composite Sandwich Bridge Deck with Complex Core Assembly
Journal of Composites for Construction. 2013. DOI : 10.1061/(Asce)Cc.1943-5614.0000435.Variable amplitude fatigue of adhesively-bonded pultruded GFRP joints
International Journal of Fatigue. 2013. DOI : 10.1016/j.ijfatigue.2013.04.024.Long-Term Development of Thermophysical and Mechanical Properties of Cold-Curing Structural Adhesives Due to Post-Curing
Journal of Applied Polymer Science. 2013. DOI : 10.1002/app.37965.A combined experimental/numerical study of the scaling effects on mode I delamination of GFRP
Composites Science and Technology. 2013. DOI : 10.1016/j.compscitech.2013.04.016.Mixed-Mode Static and Fatigue Failure Criteria for Adhesively-Bonded FRP Joints
Lausanne, EPFL, 2013. DOI : 10.5075/epfl-thesis-5728.Modeling effects of asymmetry and fiber bridging on Mode I fracture behavior of bonded pultruded composite joints
Engineering Fracture Mechanics. 2013. DOI : 10.1016/j.engfracmech.2013.02.001.Shear mechanical characterization of balsa wood as core material of composite sandwich panels
Construction and Building Materials. 2013. DOI : 10.1016/j.conbuildmat.2012.11.009.Block loading fatigue of adhesively bonded pultruded GFRP joints
International Journal of Fatigue. 2013. DOI : 10.1016/j.ijfatigue.2012.12.006.An analytical model for lateral contraction of composite laminates subjected to partially uniform tension
International Journal of Mechanical Sciences. 2013. DOI : 10.1016/j.ijmecsci.2013.01.015.Time-temperature dependence of thermomechanical recovery of cold-curing structural adhesives
International Journal of Adhesion and Adhesives. 2012. DOI : 10.1016/j.ijadhadh.2012.02.005.Buckling of GFRP sandwich webs under combined bending and shear loads
2012. 6th International Conference on FRP Composites in Civil Engineering (CICE2012), Rome, Italy, June 13-15, 2012.Instability of Thin-Walled GFRP Webs in Cell-Core Sandwiches under Combined Bending and Shear Loads
Thin-Walled Structures. 2012. DOI : 10.1016/j.tws.2011.12.021.Fatigue stiffness
Wiley Encyclopedia of Composites, 2nd Edition; Nicolais L, Borzacchiello A, Lee SM. (Eds), Wiley, 2012.Influence of the mean load effect interpretation on the fatigue life prediction of GFRP structural joints
2012. 15th European Conference on Composite Materials (ECCM15), Venice, Italy, June 24-28, 2012.Fatigue Life Prediction of Adhesively-Bonded Fiber-Reinforced Polymer Structural Joints under Spectrum Loading Patterns
Lausanne, EPFL, 2012. DOI : 10.5075/epfl-thesis-5573.Long-term physical and mechanical properties of cold curing structural epoxy adhesives
2012. 6th International Conference on FRP Composites in Civil Engineering (CICE2012), Rome, Italy, June 13-15, 2012.Shear mechanical characterization of balsa wood as core material of composite sandwich bridge deck
2012. ACUN6-Composites and nanocomposites in civil, offshore and mining infrastructure, Melbourne, Australia, November 14-16, 2012.Modeling of Buckling and Wrinkling Behavior in GFRP Plate and Sandwiches Subjected to Biaxial Compression–Tension Loading
Journal of Composites for Construction. 2012. DOI : 10.1061/(Asce)Cc.1943-5614.0000277.Mode I fatigue and fracture of adhesively-bonded pultruded GFRP double cantilever beams
2012. 15th European Conference on Composite Materials (ECCM15), Venice, Italy, June 24-28, 2012.Effects of low-temperature curing on physical behavior of cold-curing epoxy adhesives in bridge construction
International Journal of Adhesion and Adhesives. 2012. DOI : 10.1016/j.ijadhadh.2011.09.001.A hybrid S-N formulation for fatigue life modeling of composite materials and structures
Composites Part A: Applied Science and Manufacturing. 2012. DOI : 10.1016/j.compositesa.2011.11.008.Experimental investigation of R-ratio effects on fatigue crack growth of adhesively-bonded pultruded GFRP DCB joints under CA loading
Composites Part A: Applied Science and Manufacturing. 2012. DOI : 10.1016/j.compositesa.2011.10.018.Phenomenological modeling of the fatigue life of adhesively bonded joints
2012. 10th International conference on durability of composite systems, Brussels, Belgium, September 17-19, 2012.A total fatigue life model for the prediction of the R-ratio effects on fatigue crack growth of adhesively-bonded pultruded GFRP DCB joints
Composites Part A: Applied Science and Manufacturing. 2012. DOI : 10.1016/j.compositesa.2012.05.004.Effect of thermal lag on glass transition temperature of polymers during DMA
2012. ACUN6-Composites and nanocomposites in civil, offshore and mining infrastructure, Melbourne, Australia, November 14-16, 2012.Early-age tensile properties of structural epoxy adhesives subjected to low-temperature curing
International Journal of Adhesion and Adhesives. 2012. DOI : 10.1016/j.ijadhadh.2012.01.023.Experimental DSC-based method to determine glass transition temperature during curing of structural adhesives
Construction and Building Materials. 2012. DOI : 10.1016/j.conbuildmat.2011.08.059.Experimental investigation and modeling of mean load effect on fatigue behavior of adhesively-bonded pultruded GFRP joints
International Journal of Fatigue. 2012. DOI : 10.1016/j.ijfatigue.2012.04.021.Shear Buckling Resistance of GFRP Plate Girders
Journal of Composites for Construction. 2011. DOI : 10.1061/(ASCE)CC.1943-5614.0000167.Thermophysical and Thermomechanical Behavior of Cold-Curing Structural Adhesives in Bridge Construction
Lausanne, EPFL, 2011. DOI : 10.5075/epfl-thesis-5244.Biaxial Wrinkling of Thin-Walled GFRP Webs in Cell-Core Sandwiches
Lausanne, EPFL, 2011. DOI : 10.5075/epfl-thesis-5185.Contribution to shear wrinkling of GFRP webs in cell-core sandwiches
Journal of Composites for Construction. 2011. DOI : 10.1061/(ASCE)CC.1943-5614.0000212.Fatigue life behavior of adhesively bonded pultruded FRP joints under tensile and compressive loading
2011. 4th International Conference on Durability & Sustainability of Fiber Reinforced Polymer (FRP) Composites for Construction and Rehabilitation (CDCC-11), Quebec City, Quebec, Canada, July 20-22, 2011.Experimental investigation of the fatigue behavior of adhesively-bonded pultruded GFRP joints under different load ratios
International Journal of Fatigue. 2011. DOI : 10.1016/j.ijfatigue.2011.05.012.Shear buckling of GFRP beams webs
2011. 5th International Conference on FRP Composites in Civil Engineering (CICE 2010), Beijing, China, September 27-29. p. 91 - 94. DOI : 10.1007/978-3-642-17487-2_17.A phenomenological analysis of Mode I fracture of adhesively-bonded pultruded GFRP joints
Engineering Fracture Mechanics. 2011. DOI : 10.1016/j.engfracmech.2011.04.007.Mechanical recovery of epoxy adhesives subsequent to exceeding glass transition temperature
2011. 4th International Conference on Durability & Sustainability of Fiber Reinforced Polymer (FRP) Composites for Construction and Rehabilitation (CDCC-11), Quebec City, Quebec, Canada, July 20-22, 2011.Fatigue of fiber-reinforced composites
Springer, 2011.Piecewise non-linear constant life diagram formulation for FRP composite materials
International Journal of Fatigue. 2010. DOI : 10.1016/j.ijfatigue.2010.03.013.Thermomechanical behavior of multifunctional GFRP sandwich structures with encapsulated photovoltaic cells
Journal of Composites for Construction. 2010. DOI : 10.1061/(ASCE)CC.1943-5614.0000101.Effects of low and high temperatures on tensile behavior of adhesively-bonded GFRP joints
Composite Structures. 2010. DOI : 10.1016/j.compstruct.2009.11.028.Shear wrinkling of GFRP webs in cell-core sanwiches
2010. 5th International Conference on FRP Composites in Civil Engineering (CICE 2010), Beijing, China, September 27-29. p. 95 - 98. DOI : 10.1007/978-3-642-17487-2_18.Introduction to the fatigue life prediction of composite materials and structures: past, present and future prospects
Fatigue life prediction of composites adn composite structures; Woodhead Publishing, 2010. p. 1 - 44.Fatigue Life Prediction of Composites and Composite Structures, 1st Edition
Woodhead Publishing, 2010.Mixed-mode fracture of adhesively-bonded pultruded composite lap joints
Engineering Fracture Mechanics. 2010. DOI : 10.1016/j.engfracmech.2010.06.017.PNL constant life diagram formulation for FRP composites materials
2010. 14th European Conference on Composite Materials, Budapest, Hungary, June 7-10.Mode I an II fracture behavior of adhesively-bonded pultruded composite joints
Engineering Fracture Mechanics. 2010. DOI : 10.1016/j.engfracmech.2009.09.015.Influence of the constant life diagram formulation on the fatigue life prediction of composite materials
International Journal of Fatigue. 2010. DOI : 10.1016/j.ijfatigue.2009.09.008.Fatigue life prediction of composite materials under realistic loading conditions (variable amplitude loading)
Fatigue life prediction of composites adn composite structures; Woodhead Publishing, 2010. p. 293 - 333.A computational tool for the life prediction of GFRP laminates under irregular complex stress states: influence of the fatigue failure criterion
Computational Materials Science. 2010. DOI : 10.1016/j.commatsci.2010.05.039.Fracture and Fatigue of Adhesively-Bonded Fiber-Reinforced Polymer Structural Joints
Lausanne, EPFL, 2010. DOI : 10.5075/epfl-thesis-4662.Novel computational methods for fatig life modeling of composite materials
Fatigue life prediction of composites adn composite structures; Woodhead Publishing, 2010. p. 139 - 173.Fracture of adhesively-bonded pultruded GFRP joints under constant amplitude fatigue loading
International Journal of Fatigue. 2010. DOI : 10.1016/j.ijfatigue.2009.11.004.A computational tool for the fatigue life prediction of composite materials
2009. 2nd International conference on material and component performance under variable amplitude loading, Darmstadt, Germany, March 23-26, 2009.Environmental effects on fatigue behavior of adhesively-bonded pultruded structural joints
Composites Science and Technology. 2009. DOI : 10.1016/j.compscitech.2009.01.024.Modeling of the fatigue life of adhesively-bonded FRP joints with genetic programming
2009. 17th International Conference on Composite Materials (ICCM17), Edingburgh, UK, July 27-31, 2009.Adaptive neuro-fuzzy inference system in modelling fatigue life of multidirectional composite laminates
Computational Materials Science. 2008. DOI : 10.1016/j.commatsci.2008.02.028.Fatigue failure of adhesively-bonded structural joints for FRP composites.
2008. The 4th International Conference on FRP Composites in Civil Engineering (CICE 2008), Zurich, Switzerland, 2008, CD-ROM.Comparison of genetic programming with conventional methods for fatigue life modeling of FRP composite materials
International Journal of Fatigue. 2008. DOI : 10.1016/j.ijfatigue.2007.11.007.Stiffness degradation and life prediction of adhesively- bonded joints for FRP composites
2008. The 4th International Conference on FRP Composites in Civil Engineering (CICE 2008), Zurich, Switzerland, 2008, CD-ROM.Stiffness degradation and life prediction of adhesively- bonded joints for fiber-reinforced polymer composites
International Journal of Fatigue. 2008. DOI : 10.1016/j.ijfatigue.2008.02.007.Prediction of the twisting moment and axial force in a circular rubber cylinder for combined extension and torsion based on the logarithmic strain approach
Journal of Applied Polymer Science. 2008. DOI : 10.1002/app.28685.Durability of structural adhesives in bridges
2008Artificial neural networks in spectrum fatigue life prediction of composite materials
International Journal of Fatigue. 2007. DOI : 10.1016/j.ijfatigue.2006.03.004.Fatigue behavior of adhesively bonded pultruded GFRP
2007. 13th International Conference on Experimental Mechanics (ICEM13), Alexandroupolis, Greece, Alexandroupolis, Greece, 2007. p. 203 - 204. DOI : 10.1007/978-1-4020-6239-1_100.Genetic programming in modeling of fatigue life of composite materials
2007. 13th International Conference on Experimental Mechanics, Alexandroupolis, Greece, July 1-6, 2007. p. 201 - 202. DOI : 10.1007/978-1-4020-6239-1_99.Automated crack propagation detection in adhesively bonded composite joints with Digital Image Correlation techniques
Composites Part B: Engineering. 2026. DOI : 10.1016/j.compositesb.2025.113113.Transfer learning-based approach for evaluating residual stiffness in carbon fiber reinforced composites and adhesives
Engineering Applications of Artificial Intelligence. 2025. DOI : 10.1016/j.engappai.2025.111624.On the fatigue behavior of thin and thick adhesively bonded composite joints
International Journal of Fatigue. 2025. DOI : 10.1016/j.ijfatigue.2025.109065.A new equivalent crack length technique for mode I fracture of adhesively bonded joints
Composites Part B: Engineering. 2025. DOI : 10.1016/j.compositesb.2025.112733.A conditional diffusion model-based data augmentation method for structural health monitoring of composites
Mechanical Systems and Signal Processing. 2025. DOI : 10.1016/j.ymssp.2025.113155.Toughening of thick bonded interfaces through architected crack-arresting features
Composites Part A: Applied Science and Manufacturing. 2025. DOI : 10.1016/j.compositesa.2024.108575.Standard specimen geometries do not always lead to consistent fatigue results for epoxy adhesives
International Journal of Fatigue. 2025. DOI : 10.1016/j.ijfatigue.2024.108600.Combined computational-experimental investigation of residual stresses and pre-cracking in mode I behaviour of thick adhesively bonded GFRP composite joints
Composite Structures. 2025. DOI : 10.1016/j.compstruct.2024.118549.Healable adhesive paste development for thick adhesive joints
CONSTRUCTION AND BUILDING MATERIALS. 2024. DOI : 10.1016/j.conbuildmat.2024.138533.A generalized machine learning framework to estimate fatigue life across materials with minimal data
Materials and Design. 2024. DOI : 10.1016/j.matdes.2024.113355.Behavior of CFRP composites and epoxy adhesives after long-term exposure to outdoor and laboratory-controlled environments
Construction and Building Materials. 2024. DOI : 10.1016/j.conbuildmat.2024.137201.Void content and displacement ratio effects on fatigue crack growth in thick adhesively bonded composite joints under constant amplitude loading
International Journal of Fatigue. 2024. DOI : doi.org/10.1016/j.ijfatigue.2024.108508.An experimental and analytical study of mode I fracture and crack kinking in thick adhesive joints
Composites Part B: Engineering. 2024. DOI : 10.1016/j.compositesb.2024.111695.Mode-I Fracture Analysis of thick Advanced Joints Toughened With Thermoplastic Layers
2024. 21st European Conference on Composite Materials, Nantes, France, 2024-07-02 - 2024-07-05.Experimental and numerical investigation of an additively manufactured sandwich composite bridge deck utilizing gyroid building blocks
Composite Structures. 2024. DOI : doi.org/10.1016/j.compstruct.2024.118304.Combining X-ray micro-CT and microscopy-based images of two lianas species to derive structural, mechanical and functional relationships
Plant Systematics And Evolution. 2024. DOI : 10.1007/s00606-024-01889-z.Numerical investigation of two-dimensional Mode-II delamination in composite laminates
9th International Conference on Fracture of Polymers, Composites and Adhesives, Les Diablerets, Switzerland, 24-27 March 2024.Damage-tolerant behavior of structural epoxies with thin PEI and PVDF interlayers
Materials & Design. 2024. DOI : 10.1016/j.matdes.2024.112843.Numerical investigation of two-dimensional Mode-II delamination in composite laminates
Composites Part A: Applied Science and Manufacturing. 2024. DOI : 10.1016/j.compositesa.2024.108012.Influence of Thermoplastic Interlayers on Fatigue Crack Growth in Epoxy Materials
2024. 21st European Conference on Composite Materials, Nantes, France, 2024-07-02 - 2024-07-05.Improved Material Formulations for Thick Adhesive Joints in Wind Turbine Blades
Lausanne, EPFL, 2024. DOI : 10.5075/epfl-thesis-10883.Crack Arresting Strategies for Wind Turbine Blade Adhesive Joints
Lausanne, EPFL, 2024. DOI : 10.5075/epfl-thesis-11028.Two-dimensional quasi-static delamination in composite laminates under Mode-I and Mode-II conditions
Lausanne, EPFL, 2024. DOI : 10.5075/epfl-thesis-10535.Mode I fracture of thick adhesively bonded GFRP composite joints for wind turbine rotor blades
Composite Structures. 2024. DOI : 10.1016/j.compstruct.2023.117705.Fatigue dataset of hybrid non-toughened and toughened epoxy adhesives
Data In Brief. 2023. DOI : 10.1016/j.dib.2023.109862.Experimental investigation of two-dimensional Mode-II delamination in composite laminates
Composites Part A: Applied Science and Manufacturing. 2023. DOI : 10.1016/j.compositesa.2023.107666.CRACK SHIELDING MECHANISMS OF INTERLAYERED EPOXY MATERIALS UNDER QUASI-STATIC AND FATIGUE LOADING
2023. ICCM23 International Conference on Composite Materials, Belfast, Ireland, 30 July-4 August, 2023.INFLUENCE OF VOIDS ON THICK DCB JOINT BEHAVIOR
2023. ICCM23 International Conference on Composite Materials, Belfast, North Ireland, 30 July-4 August, 2023.THE EFFECT OF FATIGUE DAMAGE ON VISCOELASTIC PROPERTIES OF ANGLE PLY GFRP LAMINATES
ICCM23 International Conference on Composite Materials, Belfast, Ireland, July 30-August 4, 2023.Static and Fatigue Performance of Wind Turbine Blade Epoxy Adhesives
CompTest 2023 11th International Conference on Composite Testing and Model Identification, Girona, Spain, May 31-June 2, 2023.INFLUENCE OF VOIDS ON THICK DCB JOINT BEHAVIOR
CompTest 2023 11th International Conference on Composite Testing and Model Identification, Girona, Spain, May 31-June 2, 2023.Effects of core air gaps and steel inserts on thermomechanical response of GFRP-balsa sandwich panels subjected to fire
Composite Structures. 2023. DOI : 10.1016/j.compstruct.2023.116924.CT scanning and machine learning in fatigue life analysis of structural adhesives
2023Dataset for the hybrid non-toughened and toughened epoxy adhesive properties
Data In Brief. 2023. DOI : 10.1016/j.dib.2023.108912.Floating platform for a wind turbine
WO2023046586 . 2023.Fatigue performance of wind turbine rotor blade epoxy adhesives
Polymer Testing. 2023. DOI : 10.1016/j.polymertesting.2023.107975.TWO-DIMENSIONAL MODE-II DELAMINATION GROWTH IN COMPOSITE LAMINATES
2023. The 23rd International Conference on Composites Materials (ICCM 23), Belfast, Northern Ireland, July 30 - August 4, 2023.Fatigue behavior and life prediction of wind turbine blade composite materials
Advances in Wind Turbine Blade Design and Materials (2nd edition); Cambridge, MA: Woodhead Publishing (Elsevier), 2023.Manufacturing and toughening effects on the material properties of wind turbine blade adhesives
Polymer Testing. 2022. DOI : 10.1016/j.polymertesting.2022.107770.Effects of core air gaps and steel inserts on thermal response of GFRP-balsa sandwich panels subjected to fire
Fire Safety Journal. 2022. DOI : 10.1016/j.firesaf.2022.103703.Probabilistic fatigue model for composites based on the statistical characteristics of the cycles to failure
International Journal Of Fatigue. 2022. DOI : 10.1016/j.ijfatigue.2022.107085.Fatigue life modeling of GFRP composites considering viscoelastic behavior
EDCE Research Day, EPFL, Lausanne, Switzerland, 12.09.2022.The challenges of quasi-static and fatigue experiments of structural adhesives
International Journal Of Fatigue. 2022. DOI : 10.1016/j.ijfatigue.2022.106980.Thermophysical properties of balsa wood used as core of sandwich composite bridge decks exposed to external fire
Construction And Building Materials. 2022. DOI : 10.1016/j.conbuildmat.2022.127164.Isogeometric Kirchhoff-Love shell patches in free and forced vibration of sinusoidally corrugated FG carbon nanotube-reinforced composite panels
Thin-Walled Structures. 2022. DOI : 10.1016/j.tws.2021.108707.Cyclic Behaviour of Unidirectional Hybrid Interlayer Glass/Carbon and Carbon/Carbon Composites
2022. 10th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE), Istanbul, TURKEY, Dec 08-10, 2021. p. 2435 - 2445. DOI : 10.1007/978-3-030-88166-5_211.Investigation of bamboo nodes structural characteristics with X-ray micro-CT imaging
2022. 20th European Conference on Composite Materials - Composites Meet Sustainability, EPFL, Lausanne, June 26-30, 2022.Quasi-static and fatigue performance of non toughened and toughened adhesives for wind turbine blades
2022. 20th European Conference on Composite Materials - Composites Meet Sustainability, EPFL, Lausanne, June 26-30, 2022.Testing mechanical performance of adhesively bonded composite joints in engineering applications: an overview
Journal Of Adhesion. 2022. DOI : 10.1080/00218464.2021.1953479.Clip connector device and uses thereof
WO2022162455 ; EP4036423 . 2022.Investigation of bulk adhesive material and thick adhesive joints for wind turbine applications
2022. 20th European Conference on Composite Materials - Composites Meet Sustainability, EPFL, Lausanne, June 26-30, 2022. p. 129 - 136.Creep-fatigue interaction damage model for GFRP laminates based on thermodynamics
2022. 20th European Conference on Composite Materials - Composites Meet Sustainability, EPFL, Lausanne, June 26-30, 2022. p. 783 - 790.Probabilistic fatigue life model of composite laminas under cycle loading
2022. 20th European Conference on Composite Materials - Composites Meet Sustainability (ECCM 20), EPFL, Lausanne, Suisse, June 26-30, 2022. p. 830 - 837.Proceedings of the 20th European Conference on Composite Materials - Composites Meet Sustainability (Vol 1-6)
2022. ECCM20 - The 20th European Conference on Composite Materials.Fire performance evaluation of GFRP-balsa sandwich bridge decks
Lausanne, EPFL, 2022. DOI : 10.5075/epfl-thesis-9364.Data management and modelling of composite materials fatigue behavior
2021The Challenges of Testing Adhesives - Effects of imperfections, grip pressure, specimen shape and frequency in quasi-static and fatigue loading
2021Review of hybrid composites fatigue
Composite Structures. 2021. DOI : 10.1016/j.compstruct.2021.114358.Numerical modeling of two-dimensional delamination growth in composite laminates with in-plane isotropy
Engineering Fracture Mechanics. 2021. DOI : 10.1016/j.engfracmech.2021.107787.A 3D printed bio-composite removable connection system for bamboo spatial structures
Composite Structures. 2021. DOI : 10.1016/j.compstruct.2021.114047.Design of Composite Stairway
2021Tension-tension fatigue behavior of hybrid glass/carbon and carbon/carbon composites
International Journal of Fatigue. 2021. DOI : 10.1016/j.ijfatigue.2021.106143.Review of fatigue of bulk structural adhesives and thick adhesive joints
International Materials Reviews. 2021. DOI : 10.1080/09506608.2020.1845110.Fabrication and curing conditions effects on the fatigue behavior of a structural adhesive
International Journal of Fatigue. 2020. DOI : 10.1016/j.ijfatigue.2020.105743.Mechanical properties of a balsa wood veneer structural sandwich core material
Construction and Building Materials. 2020. DOI : 10.1016/j.conbuildmat.2020.120193.The history of fiber-reinforced polymer composite laminate fatigue
International Journal Of Fatigue. 2020. DOI : 10.1016/j.ijfatigue.2020.105512.Design of a light-shaping adaptive facade using fiber-reinforced polymer materials
2020Fatigue Characterization of a structural adhesive
2020Thermomechanical characterization of a balsa-wood-veneer structural sandwich core material at elevated temperatures
Construction And Building Materials. 2020. DOI : 10.1016/j.conbuildmat.2019.117037.Experimental investigation of mesoscale variability of clear spruce mechanical properties in the radial direction
Construction and Building Materials. 2020. DOI : 10.1016/j.conbuildmat.2020.121401.Influence of curved delamination front on R-curve of DCB specimen
Composite Structures. 2019. DOI : 10.1016/j.compstruct.2019.111311.Fatigue life prediction under realistic loading conditions
Fatigue Life Prediction of Composites and Composite Structures 2nd Edition; Elsevier, 2019. p. 387 - 423.Computational tools for the fatigue life modeling and prediction of composite materials and structures
Fatigue Life Prediction of Composites and Composite Structures 2nd Edition; Elsevier, 2019. p. 635 - 680.Creep/fatigue/relaxation of angle-ply GFRP composite laminates
Fatigue Life Prediction of Composites and Composite Structures 2nd Edition; Elsevier, 2019.Fatigue life modeling and prediction methods for composite materials and structures—Past, present, and future prospects
Fatigue Life Prediction of Composites and Composite Structures 2nd Edition; Elsevier, 2019. p. 1 - 43.Computational intelligence methods for the fatigue life modeling of composite materials
Fatigue Life Prediction of Composites and Composite Structures 2nd Edition; Elsevier, 2019. p. 349 - 383.Stress ratio effect on tension-tension fatigue behavior of angle-ply GFRP laminates
International Journal Of Fatigue. 2019. DOI : 10.1016/j.ijfatigue.2019.04.037.Modeling of fatigue behavior based on interaction between time- and cyclic-dependent mechanical properties
Composites Part A: Applied Science and Manufacturing. 2019. DOI : 10.1016/j.compositesa.2019.05.037.Two-dimensional fatigue debonding in GFRP/balsa sandwich panels
International Journal Of Fatigue. 2019. DOI : 10.1016/j.ijfatigue.2019.03.032.Creep effects on tension-tension fatigue behavior of angle-ply GFRP composite laminates
International Journal of Fatigue. 2019. DOI : 10.1016/j.ijfatigue.2019.02.010.Two-dimensional quasi-static debonding in GFRP/balsa sandwich panels
Composite Structures. 2019. DOI : 10.1016/j.compstruct.2019.02.077.Numerically-based method for fracture characterization of Mode I-dominated two-dimensional delamination in FRP laminates
Composite Structures. 2019. DOI : 10.1016/j.compstruct.2019.02.014.Design of a light-shaping kinetic facade using FRP materials
2019Shaping light to influence occupants’ experience of space: a kinetic shading system with composite materials
2019. CISBAT 2019, Lausanne, Switzerland, September 4-6, 2019. DOI : 10.1088/1742-6596/1343/1/012162.Fatigue life prediction of composites and composite structures - second edition
Woodhead Publishing, 2019.Two-dimensional crack growth in FRP laminates and sandwich panels
Lausanne, EPFL, 2019. DOI : 10.5075/epfl-thesis-9421.Design of a light-shaping adaptive facade using fiber-reinforced polymer materials
2019Temperature effect on fatigue behavior of basalt fiber-reinforced polymer composites
Polymer Composites. 2019. DOI : 10.1002/pc.25035.Load history effects in fibre-reinforced polymer composite materials
Lausanne, EPFL, 2019. DOI : 10.5075/epfl-thesis-9384.Experimental investigation of two-dimensional delamination in GFRP laminates
Engineering Fracture Mechanics. 2018. DOI : 10.1016/j.engfracmech.2018.05.015.Finite element analysis of initial imperfection effects on kinking failure of unidirectional glass fiber-reinforced polymer composites
Composite Structures. 2018. DOI : 10.1016/j.compstruct.2018.07.010.Two-dimensional crack propagation in GFRP laminates: Experimental investigation
2018. 9th International Conference on FRP Composites in Civil Engineering, CICE2018, Paris, France, July 17-19, 2018.Numerical simulation of two-dimensional crack propagation
2018. 18th European Conference on Composite Materials, Athens, Greece, June 24-28, 2018.Effects of load interruption on the fatigue life of GFRP composites
2018. 18th European Conference on Composite Materials, Athens, Greece, 24-28 June, 2018.Effect of Loading Pattern on Fatigue Behavior of Laminated Composites
2018. 18th International conference of experimental mechanics, Brussels, Belgium, July 1-5, 2018. DOI : 10.3390/ICEM18-05321.Novel experimental design for two-dimensional delamination in FRP laminates
2018. 18th International conference of experimental mechanics, Brussels, Belgium, July 1-5, 2018. DOI : 10.3390/ICEM18-05283.Load transfer mechanisms in CFRP ground anchors with multi-strap ends
Composite Structures. 2018. DOI : 10.1016/j.compstruct.2017.09.111.Mixed-mode quasi-static fracture behavior of GFRP/balsa sandwiches
2018. 12th International Conference on Sandwich Structures ICSS-12, Lausanne, Switzerland, August 19-22, 2018. p. 232 - 234. DOI : 10.5075/epfl-ICSS12-2018-232-234.Design of a Fiberglass Skateboard
2018Mechanical properties of a Balsa wood veneer core material at elevated temperatures
2018. 12th International Conference on Sandwich Structures ICSS-12, Lausanne, Switzerland, August 19-22, 2018. p. 254 - 256. DOI : 10.5075/epfl-ICSS12-2018-254-256.2D quasi-static delamination in GFRP laminates: numerical investigation
2018. 12th International Conference on Sandwich Structures ICSS-12, Lausanne, Switzerland, August 19-22, 2018. p. 133 - 135. DOI : 10.5075/epfl-ICSS12-2018-133-135.2D quasi-static delamination in GFRP laminates: experimental investigation
2018. 12th International Conference on Sandwich Structures ICSS-12, Lausanne, Switzerland, August 19-22, 2018. p. 130 - 132. DOI : 10.5075/epfl-ICSS12-2018-130-132.Development of physical and mechanical properties of a cold-curing structural adhesive in a wet bridge environment
2017. 5th International Conference on Durability of Fiber Reinforced Polymer (FRP) Composites for Construction and Rehabilitation of Structures CDCC 2017, Sherbrooke, Canada, July 19-21, 2017. p. 129 - 135.Ductility of adhesively bonded timber joints
2017. 1st International Conference on Timber Structures and Engineering, New Forest, UK, June 13-15, 2017. p. 917 - 927. DOI : 10.2495/CMEM-V5-N6-917-927.Two-dimensional analytical stress distribution model for unbalanced FRP composite single-lap joints
European Journal of Mechanics A-Solids. 2017. DOI : 10.1016/j.euromechsol.2017.07.011.Structural performance of permanent post-tensioned CFRP ground anchors with strap ends
Lausanne, EPFL, 2017. DOI : 10.5075/epfl-thesis-7923.Ductility, recovery and strain rate dependency of an acrylic structural adhesive
Construction and Building Materials. 2017. DOI : 10.1016/j.conbuildmat.2017.02.101.Are Standardized Lightning Current Waveforms Suitable for Aircraft and Wind Turbine Blades Made of Composite Materials?
IEEE Transactions on Electromagnetic Compatibility. 2017. DOI : 10.1109/TEMC.2017.2682324.Durability and fatigue performance of a typical cold-curing structural adhesive in bridge construction
Lausanne, EPFL, 2017. DOI : 10.5075/epfl-thesis-7935.Development of physical and mechanical properties of a cold-curing structural adhesive in a dry bridge environment
2017. 5th International Conference on Durability of Fiber Reinforced Polymer (FRP) Composites for Construction and Rehabilitation of Structures CDCC 2017, Sherbrooke, Canada, July 19-21, 2017. p. 427 - 434.Pull-out behavior of CFRP ground anchors with two-strap ends
Composite Structures. 2017. DOI : 10.1016/j.compstruct.2016.10.048.Evaluation of grout materials for CFRP ground anchors with strap ends
Construction and Building Materials. 2017. DOI : 10.1016/j.conbuildmat.2017.04.002.Fracture mechanics-based progressive damage modelling of adhesively bonded fibre-reinforced polymer joints
Fatigue & Fracture of Engineering Materials & Structures. 2017. DOI : 10.1111/ffe.12647.Displacement rate and structural effects on Poisson ratio of a ductile structural adhesive in tension and compression
International Journal of Adhesion and Adhesives. 2017. DOI : 10.1016/j.ijadhadh.2017.06.008.Ductility and strain rate-dependency of adhesively-bonded timber joints
Lausanne, EPFL, 2017. DOI : 10.5075/epfl-thesis-7838.Fatigue performance of a cold-curing structural epoxy adhesive subjected to moist environments
International Journal of Fatigue. 2017. DOI : 10.1016/j.ijfatigue.2017.06.022.Pull-Out Behavior of CFRP Single-Strap Ground Anchors
Journal of Composites for Construction. 2017. DOI : 10.1061/(Asce)Cc.1943-5614.0000760.Effects of aging in dry environment on physical and mechanical properties of a cold-curing structural epoxy adhesive for bridge construction
Construction and Building Materials. 2017. DOI : 10.1016/j.conbuildmat.2017.02.063.Development of physical and mechanical properties of a cold-curing structural adhesive in a wet bridge environment
Construction and Building Materials. 2017. DOI : 10.1016/j.conbuildmat.2017.03.145.On the adequacy of standardized lightning current waveform for composite structures for aircraft and wind turbine blades
2016. EMC 2016, The IEEE International Symposium on Electromagnetic Compatibility, Ottawa, Canada, 25-29 July, 2016. p. 289 - 292. DOI : 10.1109/ISEMC.2016.7571660.Effect of Natural Weathering on Durability of Pultruded Glass Fiber-Reinforced Bridge and Building Structures
Journal of Composites for Construction. 2016. DOI : 10.1061/(Asce)Cc.1943-5614.0000589.Pull-out behavior of CFRP ground anchors with two-strap ends
2016. CICE 2016, The 8th International Conference on FRP Composites in Civil Engineering, Hong Kong China, December 14-16, 2016. p. 129 - 135.Behaviour of composite sandwich decks at high temperatures
2016Stochastic analysis of clear timber as a structural material
Lausanne, EPFL, 2016. DOI : 10.5075/epfl-thesis-6944.The statistical variability and length effects in the tensile transverse behavior of clear timber
2016. WCTE 2016, World Conference on Timber Engineering, Vienna, Austria, August 22-25, 2016.Random field-based modeling of size effect on the longitudinal tensile strength of clear timber
Structural Safety. 2016. DOI : 10.1016/j.strusafe.2015.09.002.Experimental characterization of longitudinal mechanical properties of clear timber: Random spatial variability and size effects
Construction and Building Materials. 2016. DOI : 10.1016/j.conbuildmat.2016.05.109.Post-wrinkling behavior of webs in GFRP cell-core sandwich structures
Composite Structures. 2016. DOI : 10.1016/j.compstruct.2015.11.025.Experimental and numerical investigation of tensile behavior of non-laminated CFRP straps
Composites Part B. 2016. DOI : 10.1016/j.compositesb.2016.01.049.Mixed-Mode I/II fracture behavior of asymmetric composite joints
2016. 21st European Conference on Fracture (ECF), Catania, ITALY, JUN 20-24, 2016. p. 1886 - 1893. DOI : 10.1016/j.prostr.2016.06.237.Long-term behavior of cold-curing structural adhesives in aqueous and alkaline conditions
2015. 3rd International Conference of Structural Adhesives Bonding, Porto, Portugal, 2-3 July 2015.Analytical modeling of mixed-Mode bending behavior of asymmetric adhesively bonded pultruded GFRP joints
Engineering Fracture Mechanics. 2015. DOI : 10.1016/j.engfracmech.2015.08.040.Mixed-mode fatigue and fracture behavior of adhesively-bonded composite joints
Fatigue and Fracture of Adhesively-Bonded Composite Joints; Elsevier, 2015. p. 187 - 223.Predicting the fatigue life of adhesively-bonded structural composite joints
Fatigue and Fracture of Adhesively-Bonded Composite Joints; Woodhead Publishing, 2015. p. 443 - 491.Spatial variability in longitudinal elastic modulus of clear timber
2015. Euromech Colloquium 556, Spatial variability in longitudinal elastic modulus of clear timber, Dresden, Germany, 27 May – 29 May 2015.Experimental investigation of kink initiation and kink band formation in unidirectional glass fiber-reinforced polymer specimens
Composite Structures. 2015. DOI : 10.1016/j.compstruct.2015.04.028.Analytical model of asymmetrical Mixed-Mode Bending test of adhesively bonded GFRP joint
2015. CP2015– 5th International Conference on crack paths, Ferrara, Italy, 16-18 September 2015.Simulating the effect of fiber bridging and asymmetry on the fracture behavior of adhesively-bonded composite joints
Fatigue and Fracture of Adhesively-Bonded Composite Joints; Elsevier, 2015. p. 345 - 367.Optically-derived mechanical properties of glass fiber-reinforced polymer laminates for multifunctional load-bearing structures
Journal of Composite Materials. 2015. DOI : 10.1177/0021998314567696.Time-dependent mechanical behavior of acrylic adhesives
2015. 3rd International Conference of Structural Adhesives Bonding, Porto, Portugal, 2-3 July 2015.Block and variable amplitude fatigue and fracture behavior of adhesively-bonded composite structural joints
Fatigue and Fracture of Adhesively-Bonded Composite Joints; Elsevier, 2015. p. 257 - 287.Temperature effects on material properties and structural response of polymer matrix composites
Lausanne, EPFL, 2015. DOI : 10.5075/epfl-thesis-6674.Effect of temperature on kinking failure mode of non-slender glass fiber-reinforced polymer specimens
Composite Structures. 2015. DOI : 10.1016/j.compstruct.2015.07.054.Physically Based Modeling of Shear Modulus-Temperature Relationship for Thermosets
Polymer Engineering and Science. 2015. DOI : 10.1002/pen.24181.Construction Engineering: Fatigue life prediction of adhesively bonded textile composites
Fatigue of Textile Composites, 1st Edition; Elsevier, 2015. p. 441 - 481.Fatigue and fracture behavior of adhesively-bonded composite structural joints
Fatigue and Fracture of Adhesively-Bonded Composite Joints; Elsevier, 2015. p. 225 - 255.Mode I fatigue and fracture behavior of adhesively-bonded pultruded glass fiber-reinforced polymer (GFRP) composite joints
Fatigue and Fracture of Adhesively-Bonded Composite Joints; Elsevier, 2015. p. 149 - 186.Mixed-Mode I/II fracture behavior of asymmetric adhesively-bonded pultruded composite joints
Engineering Fracture Mechanics. 2014. DOI : 10.1016/j.engfracmech.2013.11.014.An iterative analytical/experimental study of bridging in delamination of the double cantilever beam specimen
Composites Part A: Applied Science and Manufacturing. 2014. DOI : 10.1016/j.compositesa.2014.02.001.MODELING THE PROGRESSIVE DAMAGE OF ADHESIVELY BONDED JOINTS
2014. ECCM16 - 16TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, Seville, Spain, 22-26 June 2014.Modeling of axial and shear stresses in multilayer Sandwich beams with stiff core layers
Composite Structures. 2014. DOI : 10.1016/j.compstruct.2014.05.049.Diffuse light transmittance of glass fiber-reinforced polymer laminates for multifunctional load-bearing structures
Journal of Composite Materials. 2014. DOI : 10.1177/0021998313511655.Fatigue and Fracture of Adhesively-Bonded Composite Joints, 1st Edition
Elsevier, 2014.FRP-balsa composite sandwich bridge deck with complex core configuration
2014. CICE2014, The 7th International Conference on FRP Composites in Civil Engineering, Vancouver, Canada, August 20-22, 2014.Thermal performance evaluation of fiber-reinforced polymer thermal breaks for balcony connections
Energy and Buildings. 2014. DOI : 10.1016/j.enbuild.2013.11.070.Fracture in complex balsa cores of fiber-reinforced polymer sandwich structures
Construction and Building Materials. 2014. DOI : 10.1016/j.conbuildmat.2014.08.029.Total light transmittance of GFRP laminates for building construction
2014. CICE2014, The 7th International Conference on FRP Composites in Civil Engineering, Vancouver, Canada, August 20-22, 2014.Static performance in transverse direction of pultruded GFRP bridge decks
2014. CICE2014, The 7th International Conference on FRP Composites in Civil Engineering, Vancouver, Canada, August 20-22, 2014.Analytical modeling of local stresses at Balsa/timber core joints of FRP sandwich structures
Composite Structures. 2014. DOI : 10.1016/j.compstruct.2014.05.050.Effect of thermal lag on glass transition temperature of polymers measured by DMA
International Journal of Adhesion and Adhesives. 2014. DOI : 10.1016/j.ijadhadh.2014.03.009.Mixed-mode quasi-static failure criteria for adhesively-bonded pultruded GFRP joints
Composites Part A: Applied Science and Manufacturing. 2014. DOI : 10.1016/j.compositesa.2013.12.007.Post-wrinkling in GFRP cell-core sandwich webs
2014. CICE2014, The 7th International Conference on FRP Composites in Civil Engineering, Vancouver, Canada, August 20-22, 2014.Structural limits of FRP-balsa sandwich decks in bridge construction
Composites Part B. 2014. DOI : 10.1016/j.compositesb.2014.03.027.Total light transmittance of glass fiber-reinforced polymer laminates for multifunctional load-bearing structures
Journal of Composite Materials. 2014. DOI : 10.1177/0021998313511653.Fatigue life prediction of wind turbine blade composite materials
Advances in wind turbine blade design and materials; Woodhead publishing, 2013. p. 251 - 297.Modeling the constant amplitude fatigue behavior of adhesively bonded pultruded GFRP joints
Journal of Adhesion Science and Technology. 2013. DOI : 10.1080/01694243.2012.727158.Total Light Transmittance of Glass Fiber-Reinforced Polymer Laminates for Multifunctional Load-Bearing Structures
2013. CISBAT 2013, Lausanne, Switzerland, September 4-6, 2013. p. 73 - 78.Mixed-mode fatigue failure criteria for adhesively-bonded pultruded GFRP joints
Composites Part A: Applied Science and Manufacturing. 2013. DOI : 10.1016/j.compositesa.2013.06.017.FRP-Balsa Composite Sandwich Bridge Deck with Complex Core Assembly
Journal of Composites for Construction. 2013. DOI : 10.1061/(Asce)Cc.1943-5614.0000435.Variable amplitude fatigue of adhesively-bonded pultruded GFRP joints
International Journal of Fatigue. 2013. DOI : 10.1016/j.ijfatigue.2013.04.024.Long-Term Development of Thermophysical and Mechanical Properties of Cold-Curing Structural Adhesives Due to Post-Curing
Journal of Applied Polymer Science. 2013. DOI : 10.1002/app.37965.A combined experimental/numerical study of the scaling effects on mode I delamination of GFRP
Composites Science and Technology. 2013. DOI : 10.1016/j.compscitech.2013.04.016.Mixed-Mode Static and Fatigue Failure Criteria for Adhesively-Bonded FRP Joints
Lausanne, EPFL, 2013. DOI : 10.5075/epfl-thesis-5728.Modeling effects of asymmetry and fiber bridging on Mode I fracture behavior of bonded pultruded composite joints
Engineering Fracture Mechanics. 2013. DOI : 10.1016/j.engfracmech.2013.02.001.Shear mechanical characterization of balsa wood as core material of composite sandwich panels
Construction and Building Materials. 2013. DOI : 10.1016/j.conbuildmat.2012.11.009.Block loading fatigue of adhesively bonded pultruded GFRP joints
International Journal of Fatigue. 2013. DOI : 10.1016/j.ijfatigue.2012.12.006.An analytical model for lateral contraction of composite laminates subjected to partially uniform tension
International Journal of Mechanical Sciences. 2013. DOI : 10.1016/j.ijmecsci.2013.01.015.Time-temperature dependence of thermomechanical recovery of cold-curing structural adhesives
International Journal of Adhesion and Adhesives. 2012. DOI : 10.1016/j.ijadhadh.2012.02.005.Buckling of GFRP sandwich webs under combined bending and shear loads
2012. 6th International Conference on FRP Composites in Civil Engineering (CICE2012), Rome, Italy, June 13-15, 2012.Instability of Thin-Walled GFRP Webs in Cell-Core Sandwiches under Combined Bending and Shear Loads
Thin-Walled Structures. 2012. DOI : 10.1016/j.tws.2011.12.021.Fatigue stiffness
Wiley Encyclopedia of Composites, 2nd Edition; Nicolais L, Borzacchiello A, Lee SM. (Eds), Wiley, 2012.Influence of the mean load effect interpretation on the fatigue life prediction of GFRP structural joints
2012. 15th European Conference on Composite Materials (ECCM15), Venice, Italy, June 24-28, 2012.Fatigue Life Prediction of Adhesively-Bonded Fiber-Reinforced Polymer Structural Joints under Spectrum Loading Patterns
Lausanne, EPFL, 2012. DOI : 10.5075/epfl-thesis-5573.Long-term physical and mechanical properties of cold curing structural epoxy adhesives
2012. 6th International Conference on FRP Composites in Civil Engineering (CICE2012), Rome, Italy, June 13-15, 2012.Shear mechanical characterization of balsa wood as core material of composite sandwich bridge deck
2012. ACUN6-Composites and nanocomposites in civil, offshore and mining infrastructure, Melbourne, Australia, November 14-16, 2012.Modeling of Buckling and Wrinkling Behavior in GFRP Plate and Sandwiches Subjected to Biaxial Compression–Tension Loading
Journal of Composites for Construction. 2012. DOI : 10.1061/(Asce)Cc.1943-5614.0000277.Mode I fatigue and fracture of adhesively-bonded pultruded GFRP double cantilever beams
2012. 15th European Conference on Composite Materials (ECCM15), Venice, Italy, June 24-28, 2012.Effects of low-temperature curing on physical behavior of cold-curing epoxy adhesives in bridge construction
International Journal of Adhesion and Adhesives. 2012. DOI : 10.1016/j.ijadhadh.2011.09.001.A hybrid S-N formulation for fatigue life modeling of composite materials and structures
Composites Part A: Applied Science and Manufacturing. 2012. DOI : 10.1016/j.compositesa.2011.11.008.Experimental investigation of R-ratio effects on fatigue crack growth of adhesively-bonded pultruded GFRP DCB joints under CA loading
Composites Part A: Applied Science and Manufacturing. 2012. DOI : 10.1016/j.compositesa.2011.10.018.Phenomenological modeling of the fatigue life of adhesively bonded joints
2012. 10th International conference on durability of composite systems, Brussels, Belgium, September 17-19, 2012.A total fatigue life model for the prediction of the R-ratio effects on fatigue crack growth of adhesively-bonded pultruded GFRP DCB joints
Composites Part A: Applied Science and Manufacturing. 2012. DOI : 10.1016/j.compositesa.2012.05.004.Effect of thermal lag on glass transition temperature of polymers during DMA
2012. ACUN6-Composites and nanocomposites in civil, offshore and mining infrastructure, Melbourne, Australia, November 14-16, 2012.Early-age tensile properties of structural epoxy adhesives subjected to low-temperature curing
International Journal of Adhesion and Adhesives. 2012. DOI : 10.1016/j.ijadhadh.2012.01.023.Experimental DSC-based method to determine glass transition temperature during curing of structural adhesives
Construction and Building Materials. 2012. DOI : 10.1016/j.conbuildmat.2011.08.059.Experimental investigation and modeling of mean load effect on fatigue behavior of adhesively-bonded pultruded GFRP joints
International Journal of Fatigue. 2012. DOI : 10.1016/j.ijfatigue.2012.04.021.Shear Buckling Resistance of GFRP Plate Girders
Journal of Composites for Construction. 2011. DOI : 10.1061/(ASCE)CC.1943-5614.0000167.Thermophysical and Thermomechanical Behavior of Cold-Curing Structural Adhesives in Bridge Construction
Lausanne, EPFL, 2011. DOI : 10.5075/epfl-thesis-5244.Biaxial Wrinkling of Thin-Walled GFRP Webs in Cell-Core Sandwiches
Lausanne, EPFL, 2011. DOI : 10.5075/epfl-thesis-5185.Contribution to shear wrinkling of GFRP webs in cell-core sandwiches
Journal of Composites for Construction. 2011. DOI : 10.1061/(ASCE)CC.1943-5614.0000212.Fatigue life behavior of adhesively bonded pultruded FRP joints under tensile and compressive loading
2011. 4th International Conference on Durability & Sustainability of Fiber Reinforced Polymer (FRP) Composites for Construction and Rehabilitation (CDCC-11), Quebec City, Quebec, Canada, July 20-22, 2011.Experimental investigation of the fatigue behavior of adhesively-bonded pultruded GFRP joints under different load ratios
International Journal of Fatigue. 2011. DOI : 10.1016/j.ijfatigue.2011.05.012.Shear buckling of GFRP beams webs
2011. 5th International Conference on FRP Composites in Civil Engineering (CICE 2010), Beijing, China, September 27-29. p. 91 - 94. DOI : 10.1007/978-3-642-17487-2_17.A phenomenological analysis of Mode I fracture of adhesively-bonded pultruded GFRP joints
Engineering Fracture Mechanics. 2011. DOI : 10.1016/j.engfracmech.2011.04.007.Mechanical recovery of epoxy adhesives subsequent to exceeding glass transition temperature
2011. 4th International Conference on Durability & Sustainability of Fiber Reinforced Polymer (FRP) Composites for Construction and Rehabilitation (CDCC-11), Quebec City, Quebec, Canada, July 20-22, 2011.Fatigue of fiber-reinforced composites
Springer, 2011.Piecewise non-linear constant life diagram formulation for FRP composite materials
International Journal of Fatigue. 2010. DOI : 10.1016/j.ijfatigue.2010.03.013.Thermomechanical behavior of multifunctional GFRP sandwich structures with encapsulated photovoltaic cells
Journal of Composites for Construction. 2010. DOI : 10.1061/(ASCE)CC.1943-5614.0000101.Effects of low and high temperatures on tensile behavior of adhesively-bonded GFRP joints
Composite Structures. 2010. DOI : 10.1016/j.compstruct.2009.11.028.Shear wrinkling of GFRP webs in cell-core sanwiches
2010. 5th International Conference on FRP Composites in Civil Engineering (CICE 2010), Beijing, China, September 27-29. p. 95 - 98. DOI : 10.1007/978-3-642-17487-2_18.Introduction to the fatigue life prediction of composite materials and structures: past, present and future prospects
Fatigue life prediction of composites adn composite structures; Woodhead Publishing, 2010. p. 1 - 44.Fatigue Life Prediction of Composites and Composite Structures, 1st Edition
Woodhead Publishing, 2010.Mixed-mode fracture of adhesively-bonded pultruded composite lap joints
Engineering Fracture Mechanics. 2010. DOI : 10.1016/j.engfracmech.2010.06.017.PNL constant life diagram formulation for FRP composites materials
2010. 14th European Conference on Composite Materials, Budapest, Hungary, June 7-10.Mode I an II fracture behavior of adhesively-bonded pultruded composite joints
Engineering Fracture Mechanics. 2010. DOI : 10.1016/j.engfracmech.2009.09.015.Influence of the constant life diagram formulation on the fatigue life prediction of composite materials
International Journal of Fatigue. 2010. DOI : 10.1016/j.ijfatigue.2009.09.008.Fatigue life prediction of composite materials under realistic loading conditions (variable amplitude loading)
Fatigue life prediction of composites adn composite structures; Woodhead Publishing, 2010. p. 293 - 333.A computational tool for the life prediction of GFRP laminates under irregular complex stress states: influence of the fatigue failure criterion
Computational Materials Science. 2010. DOI : 10.1016/j.commatsci.2010.05.039.Fracture and Fatigue of Adhesively-Bonded Fiber-Reinforced Polymer Structural Joints
Lausanne, EPFL, 2010. DOI : 10.5075/epfl-thesis-4662.Novel computational methods for fatig life modeling of composite materials
Fatigue life prediction of composites adn composite structures; Woodhead Publishing, 2010. p. 139 - 173.Fracture of adhesively-bonded pultruded GFRP joints under constant amplitude fatigue loading
International Journal of Fatigue. 2010. DOI : 10.1016/j.ijfatigue.2009.11.004.A computational tool for the fatigue life prediction of composite materials
2009. 2nd International conference on material and component performance under variable amplitude loading, Darmstadt, Germany, March 23-26, 2009.Environmental effects on fatigue behavior of adhesively-bonded pultruded structural joints
Composites Science and Technology. 2009. DOI : 10.1016/j.compscitech.2009.01.024.Modeling of the fatigue life of adhesively-bonded FRP joints with genetic programming
2009. 17th International Conference on Composite Materials (ICCM17), Edingburgh, UK, July 27-31, 2009.Adaptive neuro-fuzzy inference system in modelling fatigue life of multidirectional composite laminates
Computational Materials Science. 2008. DOI : 10.1016/j.commatsci.2008.02.028.Fatigue failure of adhesively-bonded structural joints for FRP composites.
2008. The 4th International Conference on FRP Composites in Civil Engineering (CICE 2008), Zurich, Switzerland, 2008, CD-ROM.Comparison of genetic programming with conventional methods for fatigue life modeling of FRP composite materials
International Journal of Fatigue. 2008. DOI : 10.1016/j.ijfatigue.2007.11.007.Stiffness degradation and life prediction of adhesively- bonded joints for FRP composites
2008. The 4th International Conference on FRP Composites in Civil Engineering (CICE 2008), Zurich, Switzerland, 2008, CD-ROM.Stiffness degradation and life prediction of adhesively- bonded joints for fiber-reinforced polymer composites
International Journal of Fatigue. 2008. DOI : 10.1016/j.ijfatigue.2008.02.007.Prediction of the twisting moment and axial force in a circular rubber cylinder for combined extension and torsion based on the logarithmic strain approach
Journal of Applied Polymer Science. 2008. DOI : 10.1002/app.28685.Durability of structural adhesives in bridges
2008Artificial neural networks in spectrum fatigue life prediction of composite materials
International Journal of Fatigue. 2007. DOI : 10.1016/j.ijfatigue.2006.03.004.Fatigue behavior of adhesively bonded pultruded GFRP
2007. 13th International Conference on Experimental Mechanics (ICEM13), Alexandroupolis, Greece, Alexandroupolis, Greece, 2007. p. 203 - 204. DOI : 10.1007/978-1-4020-6239-1_100.Genetic programming in modeling of fatigue life of composite materials
2007. 13th International Conference on Experimental Mechanics, Alexandroupolis, Greece, July 1-6, 2007. p. 201 - 202. DOI : 10.1007/978-1-4020-6239-1_99.Enseignement et PhD
Current Phd
Filippo Mannino, Joseph Vincent Arnaud Bernaert, Seyed Shayan Khalooei Tafti
Past Phd As Director
Alireza Farajzadeh Moshtaghin, Abdolvahid Movahedirad, Dharun Vadugappatty Srinivasan
Past Phd As Codirector
Ye Zhang, Behzad Dehghan Manshadi, Omar Moussa, Roohollah Sarfaraz Khabbaz, Moslem Shahverdi, Wei Sun, Haifeng Fan, Maria Savvilotidou, Myrsini Angelidi, Aida Cameselle Molares, Niloufar Vahedi, Jialiang Fan, Congzhe Wang
Courses
Advanced composites in engineering structures
1.Introduire des sujets sur les propriétés, le traitement, le comportement mécanique, la caractérisation, l'analyse et la conception structurelle des composites renforcés de fibres 2.Aider les étudiants à développer leurs compétences grâce à des enquêtes indépendantes sur des sujets de recherche
Composites design and innovation
Le cours offre l'opportunité d'acquérir une expérience pratique dans la caractérisation de polymères renforcés de fibres et les méthodes de fabrication / production de structures composites.
Floating offshore renewables
L'objectif est de permettre aux étudiants de travailler au sein d'un petit groupe pour développer un concept d'infrastructure offshore à des fins multifonctionnelles.
Selected Topics on Advanced Composites in Engineering Structures
The course focuses on the current investigations in the fields of fatigue and fracture of composite materials and composite structural components, like adhesively-bonded joints. Students would be able to develop design concepts for composite structures under realistic loading conditions
Structural mechanics (for GC)
Le cours aborde les bases de la mécanique des structures, analyse les performances des matériaux et des structures contre les charges et se concentre sur les relations contrainte-déformation et l'effet des charges axiales, de flexion, de cisaillement et de torsion sur les structures d'ingénierie.