A Simple and Reliable PDMS and SU-8 Irreversible Bonding Method and Its Application on a Microfluidic-MEA Device for Neuroscience Research, in Micromachines, vol. 6, num. 12, p. 1923-1934, 2015.
On-chip synthesis of fine-tuned bone-seeking hybrid nanoparticles, in Nanomedicine, vol. 10, num. 23, p. 3431-3449, 2015.
Fabrication of multilayered nanofluidic membranes through silicon templates, in Nanoscale, vol. 7, num. 48, p. 20451-20459, 2015.
Thermal control of ionic transport and fluid flow in nanofluidic channels, in Nanoscale, vol. 7, num. 44, p. 18799-18804, 2015.
Microstereolithography, in Three-Dimensional Microfabrication Using Two-photon Polymerization, p. 20-44, 2015.
Special Issue: 15 Years of SU8 as MEMS Material, in Micromachines, vol. 6, num. 6, p. 790-792, 2015.
Temperature Sensitivity of Nanochannel Electrical Conductance, in ACS Nano, vol. 9, num. 4, p. 4563-4571, 2015.
An improved model for predicting electrical conductance in nanochannels, in Phys. Chem. Chem. Phys., vol. 17, num. 6, p. 4160-4167, 2015.
Composite hydrogel-loaded alumina membranes for nanofluidic molecular filtration, in Journal of Membrane Science, vol. 477, num. 1, p. 151-156, 2015.
Enclosed Electronic System for Force Measurements in Knee Implants, in Sensors, vol. 14, num. 8, p. 15009-15021, 2014.
Magnetically Aligned Nanodomains: Application in High-Performance Ion Conductive Membranes, in ACS Applied Materials & Interfaces, vol. 6, num. 10, p. 7099-7107, 2014.
Microfluidic-Assisted Self-Assembly of Complex Dendritic Polyethylene Drug Delivery Nanocapsules, in Advanced Materials, vol. 26, num. 19, p. 3118-3123, 2014.
On-Chip Fabrication of Paclitaxel-Loaded Chitosan Nanoparticles for Cancer Therapeutics, in Advanced Functional Materials, vol. 24, num. 4, p. 432-441, 2014.
Smart instrumentation for determination of ligament stiffness and ligament balance in total knee arthroplasty, in Medical Engineering & Physics, vol. 36, num. 6, p. 721-725, 2014.
Al2O3/W hetero-structured nanopore membranes: From native to tunable nanofluidic diodes. 8th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS), Suzhou, China, 2013..
Design and test of a MEMS strain-sensing device for monitoring artificial knee implants, in Biomedical Microdevices, vol. 15, num. 5, p. 831-839, 2013.
Field effect modulated nanofluidic diode membrane based on Al2O3/W heterogeneous nanopore arrays, in Applied Physics Letters, vol. 102, num. 21, p. 213108.1-4, 2013.
Nafion/chitosan-wrapped CNT nanocomposite membrane for high-performance direct methanol fuel cells, in RSC Advances, vol. 3, num. 20, p. 7337-7346, 2013.
Label-Free Recognition of Drug Resistance via Impedimetric Screening of Breast Cancer Cells, in PLoS ONE, vol. 8, num. 3, p. e57423.1-12, 2013.
Microfluidic assisted self-assembly of chitosan based nanoparticles as drug delivery agents, in Lab on a Chip, vol. 13, num. 2, p. 204-207, 2013.
Instrumented Knee Prosthesis for Force and Kinematics Measurements, in IEEE Transactions on Automation Science and Engineering, vol. 10, num. 3, p. 615-624, 2013.
Polyimide/SU-8 catheter-tip MEMS gauge pressure sensor, in Biomedical Microdevices, vol. 14, num. 5, p. 819-828, 2012.
Facile fabrication of nanofluidic diode membranes using anodic aluminium oxide, in Nanoscale, vol. 4, num. 18, p. 5718-5723, 2012.
Microfluidic synthesis of chitosan-based nanoparticles for fuel cell applications, in Chemical communications (Cambridge, England), vol. 48, num. 62, p. 7744-7746, 2012.
A microfluidic-based frequency-multiplexing impedance sensor (FMIS), in Lab on a Chip, vol. 12, num. 15, p. 2712-2718, 2012.
Simulation of epiretinal prostheses - Evaluation of geometrical factors affecting stimulation thresholds, in Journal of NeuroEngineering and Rehabilitation, vol. 8, num. 44, p. 1-10, 2011.
Instrumented Prosthesis for Knee Implants Monitoring. IEEE Conference on Automation Science and Engineering (IEEE CASE), Trieste, Italy, 2011..
Distinguishing drug-induced minor morphological changes from major cellular damage via label-free impedimetric toxicity screening, in Lab on a Chip, vol. 11, num. 14, p. 2352-2361, 2011.
Microstereolithography, in Stereolithography Materials, Processes and Applications, p. 81-112, 2011.
Simulations to study spatial extent of stimulation and effect of electrode–tissue gap in subretinal implants, in Medical Engineering & Physics, vol. 33, num. 6, p. 755-763, 2011.
Direct localised measurement of electrical resistivity profile in rat and embryonic chick retinas using a microprobe, in Journal of Electrical Bioimpedance, vol. 1, p. 84-92, 2010.
Wireless contact lens sensor for intra ocular pressure monitoring: assessment on enucleated pig eyes, in Acta Ophthalmologica, vol. 87, num. 4, p. 433-437, 2009.
Microfluidic hydrogel layers with multiple gradients to stimulate and perfuse three-dimensional neuronal cell cultures. Eurosensors XXIII conference, Lausanne, Switzerland, Procedia Chemistry, 2009..
Direct measurement of diffusing proteins in nanochannels using fluorescence correlation spectroscopy. Eurosensors XXIII conference, Lausanne, Switzerland, 2009..
in vivo Electrical Impedance Spectroscopy of Tissue Reaction to Microelectrode Arrays, in IEEE Transactions on Biomedical Engineering, vol. 56, num. 7, p. 1909-1918, 2009.
Direct Observation of Transitions between Surface-Dominated and Bulk Diffusion Regimes in Nanochannels, in Analytical Chemistry, vol. 81, p. 5407-5412, 2009.
Towards a nanostructured thermoelectric generator using ion-track lithography, in Journal of Micromechanics and Microengineering, vol. 18, num. 10, p. 104015.1-104015.9, 2008.
Healthy Aims: Developing new medical implants and diagnostic equipment, in IEEE Pervasive Computing, vol. 7, num. 1, p. 14-21, 2008.
A Novel Method for Determining the Effective Diffusion Coefficients of Proteins into Confined Areas. USGEB, Lausanne, 2008..
Fluorine based plasma treatment of biocompatible silicone elastomer. Effect of temperature on etch rate and surface properties, in Plasma Processes and Polymers, vol. 5, num. 3, p. 246-255, 2008.
Demonstration of cortical recording using novel flexible polymer neural probes, in Sensors and Actuators A: physical, vol. 143, num. 1, p. 90-96, 2008.
Direct measurement of effective diffusion coefficients in nanochannels using steady-state dispersion effects, in Virtual Journal of Biological Physics Research, vol. 14, num. 10, p. -, 2007.
Direct measurement of effective diffusion coefficients in nanochannels using steady-state dispersion effects, in Virtual Journal of Nanoscale Science & Technology, vol. 16, num. 22, p. -, 2007.
Determining the Diffusion Coefficients of Proteins Inside a Nanoslit. Nanotech-Montreux 2007, 2007..
Assessment on Enucleated Pig Eyes of a Minimally Invasive Contact Lens Sensor for IOP Monitoring. Annual meeting of the American Academy of Ophthalmology 2007, 2007..
Controlled Release Drug Coatings on Flexible Neural Probes. 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society EMBS, Lyon, 2007..
Technology developments to initiate a next generation of Cochlear Implants. IEEE EMBS, Lyon, FRANCE, 2007..
Demonstration of cortical recording and reduced inflammatory response using flexible polymer neural probes. MEMS’07, 2007..
The effect of biodegradable drug release coatings on the electrical characteristrics of neural electrodes. Transducers 07, 2007..
Contraction measurements of cardiomyocytes grown on silicon cantilevers. Transducers 07, 2007..
Direct Measurement of Effective Diffusion Coefficients in Nanochannels Using Steady-State Dispersion Effects, in Applied Physics Letters, vol. 91, p. 203106, 2007.
Developments in Sensor Systems, in Medical Device Technology, vol. 18, num. 5, p. 32-35, 2007.
SU-8 nanocomposite coatings with improved tribological performance for MEMS, in Surface & coatings technology, vol. 201, num. 6, p. 2289-2295, 2006.
Effect of filler behavior on nanocomposite SU8 photoresist for moving micro- parts, in Microelectronic Engineering, vol. 83, p. 1273-1276, 2006.
SU-8 nanocomposite photoresist with low stress properties for microfabrication applications, in Microelectronic engineering, vol. 83, p. 1966-1979, 2006.
pH Controlled Diffusion of Proteins with Different pI Values across a Nanochannel on a Chip, in Nano Letters, vol. 6, num. 3, p. 543-547, 2006.
Conductive SU8 Photoresist for Microfabrication, in Advanced Functional Materials, num. 15, p. 1511-1516, 2005.
Partial release and detachment of microfabricated metal and polymer structures by anodic metal dissolution, in JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, vol. 14, num. 2, p. 383-391, 2005.
First steps toward noninvasive intraocular pressure monitoring with a sensing contact lens, in INVESTIGATIVE OPHTHALMOLOGY & VISUAL SCIENCE, vol. 45, num. 9, p. 3113-3117, 2004.
SU8-silver photosensitive nanocomposite, in ADVANCED ENGINEERING MATERIALS, vol. 6, num. 9, p. 719-724, 2004.
Resistivity probing of multi-layered tissue phantoms using microelectrodes, in PHYSIOLOGICAL MEASUREMENT, vol. 25, num. 3, p. 645-658, 2004.
Flexible polyimide probes with microelectrodes and embedded microfluidic channels for simultaneous drug delivery and multi-channel monitoring of bioelectric activity, in BIOSENSORS & BIOELECTRONICS, vol. 19, num. 10, p. 1309-1318, 2004.
Polyimide microfluidic devices with integrated nanoporous filtration areas manufactured by micromachining and ion track technology, in JOURNAL OF MICROMECHANICS AND MICROENGINEERING, vol. 14, num. 3, p. 324-331, 2004.
Microfabrication of ceramic components by microstereolithography, in JOURNAL OF MICROMECHANICS AND MICROENGINEERING, vol. 14, num. 2, p. 197-203, 2004.
Ceramic microcomponents by microstereolithography. 17th IEEE International Conference on Micro Electro Mechanical Systems, Maastricht, NETHERLANDS, PROCEEDINGS: IEEE MICRO ELECTRO MECHANICAL SYSTEMS WORKSHOP , 2004..
Conductive SU8-silver composite photopolymer. 17th IEEE International Conference on Micro Electro Mechanical Systems, Maastricht, NETHERLANDS, PROCEEDINGS: IEEE MICRO ELECTRO MECHANICAL SYSTEMS WORKSHOP , 2004..
Cell immersion and cell dipping in microfluidic devices, in LAB ON A CHIP, vol. 4, num. 2, p. 148-151, 2004.
Polyimide and SU-8 microfluidic devices manufactured by heat- depolymerizable sacrificial material technique, in LAB ON A CHIP, vol. 4, num. 2, p. 114-120, 2004.
Dielectric spectroscopy in a micromachined flow cytometer: theoretical and practical considerations, in LAB ON A CHIP, vol. 4, num. 3, p. 241-251, 2004.
High aspect ratio, 3D structuring of photoresist materials by ion beam LIGA, in MICROELECTRONIC ENGINEERING, vol. 67-8, p. 96-103, 2003.
Microstereolithography: a review. Symposim on Rapid Prototyping Technologies, BOSTON, MASSACHUSETTS, MATERIALS RESEARCH SOCIETY SYMPOSIUM PROCEEDINGS , 2003..
A soft contact lens with a MEMS strain gage embedded for intraocular pressure monitoring. 12th International Conference on Solid-State Sensors, Actuators and Microsystems, BOSTON, MASSACHUSETTS, 2003..
Composite photopolymer microstructures: From planar to 3D devices. 12th International Conference on Solid-State Sensors, Actuators and Microsystems, BOSTON, MASSACHUSETTS, 2003..
Flexible microchannels with integrated nanoporous membranes for filtration and separation of molecules and particles. 15th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2002), LAS VEGAS, NEVADA, PROCEEDINGS: IEEE MICRO ELECTRO MECHANICAL SYSTEMS WORKSHOP , 2002..
Methods and algorithms for the slicing process in microstereolithography, in RAPID PROTOTYPING JOURNAL, vol. 8, num. 3, p. 190-199, 2002.
3D micromixers - Downscaling large scale industrial static mixers. 14th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2001), INTERLAKEN, SWITZERLAND, PROCEEDINGS: IEEE MICRO ELECTRO MECHANICAL SYSTEMS WORKSHOP , 2001..
Microstereolithography: Concepts and applications. 8th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2001), ANTIBES JUAN LES PINS, FRANCE, 2001..
Static micromixers based on large-scale industrial mixer geometry, in LAB ON A CHIP, vol. 1, num. 1, p. 56-60, 2001.
3D microfabrication by combining microstereolithography and thick resist UV lithography, in SENSORS AND ACTUATORS A-PHYSICAL, vol. 73, num. 1-2, p. 14-23, 1999.
Microstereolithography: a new process to build complex 3D objects. Conference on Design, Test, and Microfabrication of MEMS and MOEMS, PARIS, FRANCE, PROCEEDINGS OF THE SOCIETY OF PHOTO-OPTICAL INSTRUMENTATION ENGINEERS (SPIE) , 1999..
Combining microstereolithography and thick resist UV lithography for 3D microfabrication. 11th Annual International Workshop on Micro Electro Mechanical Systems, HEIDELBERG, GERMANY, 1998..