Joël Cugnoni
EPFL STI IGM LMAF
ME C1 365 (Bâtiment ME)
Station 9
CH-1015 Lausanne
EPFL STI SGM-GE
ME C1 365 (Bâtiment ME)
Station 9
CH-1015 Lausanne
Compétences
Mécanique des solides et des structures
Modélisation par éléments finis
Identification & Optimisation
Métrologie optique
(DIC, FBG, ESPI)
Dynamique & analyse modale
Matériaux composites & structures légères
Publications
Infoscience
S. Kohler / J. Botsis; J. Cugnoni (Dir.) : Multiscale experimental characterisation and modelling of transverse cracking in thin-ply composites. Lausanne, EPFL, 2019. DOI : 10.5075/epfl-thesis-9132.
G. Frossard; J. Cugnoni; T. Gmur; J. Botsis : Ply thickness dependence of the intralaminar fracture in thin-ply carbon- epoxy laminates; COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING. 2018. DOI : 10.1016/j.compositesa.2018.03.001.
L. Mencattelli; M. Borotto; J. Cugnoni; R. Lazzeri; J. Botsis : Analysis and evaluation of friction effects on mode II delamination testing; COMPOSITE STRUCTURES. 2018. DOI : 10.1016/j.compstruct.2018.01.085.
N. Nasri / J. Botsis; J. Cugnoni (Dir.) : Effect of an adhesive layer on the mode I delamination in unidirectional CFRP bonded joints. Lausanne, EPFL, 2017. DOI : 10.5075/epfl-thesis-7858.
S. Zabihzadeh; J. Cugnoni; L. I. Duarte; S. Van Petegem; H. Van Swygenhoven : Deformation behavior of nano-porous polycrystalline silver. Part II: Simulations; Acta Materialia. 2017. DOI : 10.1016/j.actamat.2017.04.041.
G. Frossard; J. Cugnoni; T. Gmur; J. Botsis : An efficient method for fiber bridging traction identification based on the R-curve: Formulation and experimental validation; Composite Structures. 2017. DOI : 10.1016/j.compstruct.2017.04.032.
G. Frossard; J. Cugnoni; T. Gmur; J. Botsis : Mode I interlaminar fracture of carbon epoxy laminates: Effects of ply thickness; Composites Part A-Applied Science And Manufacturing. 2016. DOI : 10.1016/j.compositesa.2016.09.009.
M. Piccinini; J. Cugnoni; J. Botsis; P. Ammann; A. Wiskott : Numerical prediction of peri-implant bone adaptation: Comparison of mechanical stimuli and sensitivity to modeling parameters; Medical Engineering & Physics. 2016. DOI : 10.1016/j.medengphy.2016.08.008.
M. Piccinini; J. Cugnoni; J. Botsis; P. Ammann; A. Wiskott : Peri-implant bone adaptations to overloading in rat tibiae: experimental investigations and numerical predictions; Clinical Oral Implants Research. 2016. DOI : 10.1111/clr.12760.
E. Farmand-Ashtiani; J. Cugnoni; J. Botsis : Effects of large scale bridging in load controlled fatigue delamination of unidirectional carbon-epoxy specimens; Composites Science And Technology. 2016. DOI : 10.1016/j.compscitech.2016.10.022.
M. Maleki; J. Cugnoni; J. Botsis : Multi-scale modeling of elasto-plastic response of SnAgCu lead-free solder alloys at different ageing conditions: Effect of microstructure evolution, particle size effects and interfacial failure; Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2016. DOI : 10.1016/j.msea.2016.03.011.
M. Rheme; J. Botsis; J. Cugnoni; P. Navi : Mixed mode fracture behavior of welded wood joints investigated with the Arcan test; Wood Science And Technology. 2016. DOI : 10.1007/s00226-015-0782-0.
E. Farmand-Ashtiani; D. Alanis; J. Cugnoni; J. Botsis : Delamination in cross-ply laminates: Identification of traction-separation relations and cohesive zone modeling; Composites Science And Technology. 2015. DOI : 10.1016/j.compscitech.2015.09.025.
G. Frossard; J. Cugnoni; T. Gmür; I. Botsis : Fracture of thin-ply carbon-epoxy laminates: ply-thickness effects. 2015. 20th International Conference on Composite Materials ICCM20, Copenhagen, Denmark, July 19-24, 2015.
G. Frossard; M. Boesiger; J. Cugnoni; T. Gmür; I. Botsis : Mode I fracture of thin-ply carbon-epoxy laminates: effects of ply and specimen thickness. 2015. 7th International Conference on Composites Testing and Model Identification CompTest2015, Madrid, Spain, April 8-10, 2015. p. 36-37.
E. Guzman; J. Cugnoni; T. Gmür : Monitoring of composite structures using a network of integrated PVDF film transducers; Smart Materials and Structures. 2015. DOI : 10.1088/0964-1726/24/5/055017.
E. Farmand-Ashtiani; J. Cugnoni; J. Botsis : Specimen thickness dependence of large scale fiber bridging in mode I interlaminar fracture of carbon epoxy composite; International Journal Of Solids And Structures. 2015. DOI : 10.1016/j.ijsolstr.2014.03.031.
E. R. Guzman Solares; J. Cugnoni; T. Gmür : A new structural health monitoring (SHM) system using integrated polyvinylidene difluoride (PVDF) transducer networks. 2014. 65th International Astonautical Congress IAC2014, Toronto, Canada, September 29 - October 3, 2014.
G. Frossard; J. Cugnoni; T. Gmür; I. Botsis : Influence of the thin ply size on mode I and II energy release rate of unidirectional carbon epoxy laminates. 2014. 16th International Conference on Experimental Mechanics ICEM16, Cambridge, UK, July 7-11, 2014.
M. Piccinini; J. Cugnoni; J. Botsis; P. Ammann; A. Wiskott : Influence of gait loads on implant integration in rat tibiae: Experimental and numerical analysis; Journal Of Biomechanics. 2014. DOI : 10.1016/j.jbiomech.2014.08.023.
E. Croisier; S. Liang; T. Schweizer; S. Balog; M. Mionic et al. : A toolbox of oligopeptide-modified polymers for tailored elastomers; Nature Communications. 2014. DOI : 10.1038/ncomms5728.
R. Amacher; J. Cugnoni; J. Botsis; L. Sorensen; W. Smith et al. : Thin ply composites: Experimental characterization and modeling of size-effects; Composites Science And Technology. 2014. DOI : 10.1016/j.compscitech.2014.06.027.
M. Piccinini; J. Cugnoni; J. Botsis; G. Zacchetti; P. Ammann et al. : Factors affecting subject-specific finite element models of implant-fitted rat bone specimens: critical analysis of a technical protocol; Computer Methods In Biomechanics And Biomedical Engineering. 2014. DOI : 10.1080/10255842.2012.736502.
M. Piccinini / I. Botsis; J. Cugnoni (Dir.) : Prediction of peri-implant bone adaptation to mechanical environments. Lausanne, EPFL, 2014. DOI : 10.5075/epfl-thesis-6273.
E. Guzman; J. Cugnoni; T. Gmuer : Multi-factorial models of a carbon fibre/epoxy composite subjected to accelerated environmental ageing; Composite Structures. 2014. DOI : 10.1016/j.compstruct.2013.12.028.
M. Maleki; J. Cugnoni; J. Botsis : Isothermal Ageing of SnAgCu Solder Alloys: Three-Dimensional Morphometry Analysis of Microstructural Evolution and Its Effects on Mechanical Response; Journal Of Electronic Materials. 2014. DOI : 10.1007/s11664-014-3017-5.
M. Lai; J. Botsis; J. Cugnoni : Studies of hygrothermal degradation of a single fiber composite: An iterative approach with embedded optical sensors and numerical analysis; Composites Part B-Engineering. 2014. DOI : 10.1016/j.compositesb.2013.08.091.
E. R. Guzman Solares; J. Cugnoni; T. Gmür : Use of PVDF transducers as actuators for operational modal analysis on composite samples. 2013. 21st International Conference on Composites/Nano Engineering ICCE-21, Santa Cruz de Tenerife, Spain, July 21-27, 2013.
E. R. Guzman Solares; J. Cugnoni; T. Gmür : Quantification of damage due to environmental conditions on carbon fibre/epoxy composite samples. 2013. 6th International Conference on Composite Testing and Model Identification CompTest2013, Aalborg, Denmark, April 22-24, 2013. p. 103-104.
M. Rheme; J. Botsis; J. Cugnoni; P. Navi : Influence of the moisture content on the fracture characteristics of welded wood joint. Part 2: Mode II fracture; Holzforschung. 2013. DOI : 10.1515/hf-2012-0145.
M. Rheme; J. Botsis; J. Cugnoni; P. Navi : Influence of the moisture content on the fracture characteristics of welded wood joint. Part 1: Mode I fracture; Holzforschung. 2013. DOI : 10.1515/hf-2012-0144.
G. Zacchetti; A. Wiskott; J. Cugnoni; J. Botsis; P. Ammann : External Mechanical Microstimuli Modulate the Osseointegration of Titanium Implants in Rat Tibiae; Biomed Research International. 2013. DOI : 10.1155/2013/234093.
E. Guzman; J. Cugnoni; T. Gmuer; P. Bonhote; A. Schorderet : Survivability of integrated PVDF film sensors to accelerated ageing conditions in aeronautical/aerospace structures; Smart Materials And Structures. 2013. DOI : 10.1088/0964-1726/22/6/065020.
M. Maleki; J. Cugnoni; J. Botsis : Microstructure-based modeling of the ageing effect on the deformation behavior of the eutectic micro-constituent in SnAgCu lead-free solder; Acta Materialia. 2013. DOI : 10.1016/j.actamat.2012.09.033.
E. Farmand-Ashtiani; J. Cugnoni; J. Botsis : Monitoring and characterization of the interfacial fracture in sandwich composites with embedded multiplexed optical sensors; Composite Structures. 2013. DOI : 10.1016/j.compstruct.2012.08.059.
E. R. Guzman Solares; J. Cugnoni; T. Gmür : Accelerated isothermal and cyclic ageing of carbon fibre/epoxy composite panels with integrated PVDF sensors. 2012. 15th International Conference on Experimental Mechanics ICEM15, Porto, Portugal, July 22-27, 2012. p. 341-342.
H. W. A. Wiskott; P. Bonhote; J. Cugnoni; S. Durual; G. Zacchetti et al. : Implementation of the "loaded implant" model in the rat using a miniaturized setup - description of the method and first results; Clinical Oral Implants Research. 2012. DOI : 10.1111/j.1600-0501.2011.02349.x.
M. Maleki / I. Botsis; J. Cugnoni (Dir.) : Deformation and Damage in Lead-free Solder Joints. Lausanne, EPFL, 2012. DOI : 10.5075/epfl-thesis-5565.
M. Lai; J. Botsis; J. Cugnoni; D. Coric : An experimental-numerical study of moisture absorption in an epoxy; Composites Part A-Applied Science And Manufacturing. 2012. DOI : 10.1016/j.compositesa.2012.01.027.
G. Zacchetti; A. Wiskott; J. Cugnoni; I. Botsis; M. Piccinini et al. : External mechanical microstimuli improve osseointegration of titanium implants in rat proximal tibiae. 2012. 39th Annual Congress of the European-Calcified-Tissue-Society (ECTS), Stockholm, SWEDEN, May 19-23, 2012. p. S126-S126. DOI : 10.1016/j.bone.2012.02.390.
J. Frieden; J. Cugnoni; J. Botsis; T. Gmuer : Low energy impact damage monitoring of composites using dynamic strain signals from FBG sensors - Part II: Damage identification; Composite Structures. 2012. DOI : 10.1016/j.compstruct.2011.08.025.
J. Frieden; J. Cugnoni; J. Botsis; T. Gmuer : Low energy impact damage monitoring of composites using dynamic strain signals from FBG sensors - Part I: Impact detection and localization; Composite Structures. 2012. DOI : 10.1016/j.compstruct.2011.08.003.
M. Galli; J. Cugnoni; I. Botsis : Numerical And Statistical Estimates Of The Representative Volume Element Of Elastoplastic Random Composites; European Journal of Mechanics Series A Solids. 2012. DOI : 10.1016/j.euromechsol.2011.07.010.
J. Frieden; J. Cugnoni; I. Botsis; T. Gmür : Low-velocity impact damage identification in CFRP plates using inverse numerical-experimental optimization. 2011. 16th International Conference on Composite Structures ICCS16, Porto, Portugal, June 28-30, 2011.
J. Frieden; J. Cugnoni; I. Botsis; T. Gmür : Characterization of impact damage in fibre reinforced composite plates using embedded FBG sensors. 2011. 5th International Conference on Composite Testing and Model Identification Comptest 2011, EPFL, Lausanne, February 14-16, 2011. p. 157-158.
I. Botsis; T. Gmür; J. Cugnoni : Proceedings of the 5th International Conference on Composite Testing and Model identification CompTest2011. 2011. CompTest2011.
M. Matter; T. Gmur; J. Cugnoni; A. Schorderet : Identification of the elastic and damping properties in sandwich structures with a low core-to-skin stiffness ratio; Composite Structures. 2011. DOI : 10.1016/j.compstruct.2010.09.009.
S. Stutz; J. Cugnoni; J. Botsis : Studies of mode I delamination in monotonic and fatigue loading using FBG wavelength multiplexing and numerical analysis; Composites Science And Technology. 2011. DOI : 10.1016/j.compscitech.2010.12.016.
J. Frieden; J. Cugnoni; J. Botsis; T. Gmuer : Vibration-based characterization of impact induced delamination in composite plates using embedded FBG sensors and numerical modelling; Composites Part B-Engineering. 2011. DOI : 10.1016/j.compositesb.2011.02.021.
S. Stutz; J. Cugnoni; J. Botsis : Crack - fiber sensor interaction and characterization of the bridging tractions in mode I delamination; Engineering Fracture Mechanics. 2011. DOI : 10.1016/j.engfracmech.2011.01.014.
M. Maleki; J. Cugnoni; J. Botsis : On the Mutual Effect of Viscoplasticity and Interfacial Damage Progression in Interfacial Fracture of Lead-Free Solder Joints; Journal Of Electronic Materials. 2011. DOI : 10.1007/s11664-011-1718-6.
M. Galli; E. Fornasiere; J. Cugnoni; M. L. Oyen : Poroviscoelastic Characterization of Particle-Reinforced Gelatin Gels using Indentation and Homogenization; Journal of the Mechanical Behavior of Biomedical Materials. 2011. DOI : 10.1016/j.jmbbm.2011.01.009.
M. Bergomi; J. Cugnoni; M. Galli; I. Botsis; U. Belser et al. : Hydro-mechanical coupling in the periodontal ligament: A porohyperelastic finite element model; Journal of Biomechanics. 2011. DOI : 10.1016/j.jbiomech.2010.08.019.
J. Frieden; J. Cugnoni; I. Botsis; T. Gmür : Damage assessment in CFRP plates based on dynamic measurements with FBG sensors. 2010. 10th International Conference on Computational Structures Technology, Valencia, Spain, September 14-17, 2010.
J. Frieden; J. Cugnoni; J. Botsis; T. Gmuer; D. Coric : High-speed internal strain measurements in composite structures under dynamic load using embedded FBG sensors; Composite Structures. 2010. DOI : 10.1016/j.compstruct.2010.01.007.
M. Bergomi; J. Cugnoni; J. Botsis; U. C. Belser; H. W. A. Wiskott : The role of the fluid phase in the viscous response of bovine periodontal ligament; Journal Of Biomechanics. 2010. DOI : 10.1016/j.jbiomech.2009.12.020.
M. Bergomi; J. Cugnoni; H. W. A. Wiskott; P. Schneider; M. Stampanoni et al. : Three-dimensional morphometry of strained bovine periodontal ligament using synchrotron radiation-based tomography; Journal Of Anatomy. 2010. DOI : 10.1111/j.1469-7580.2010.01250.x.
M. Matter; T. Gmuer; J. Cugnoni; A. Schorderet : A PSDT shell finite element formulation including structural damping; Computers & Structures. 2010. DOI : 10.1016/j.compstruc.2010.04.008.
M. Lai; J. Cugnoni; J. Botsis : Analysis of hygrothermally induced fiber fracture in single fiber composite using fiber Bragg grating. 2010. 14th International Conference on Experimental Mechanics (ICEM14), Poitiers, FRANCE, Jul 04-09, 2010. p. -. DOI : 10.1051/epjconf/20100634001.
J.-M. Bourgeon; S. Dyen; D. Moyon; D. Schmäh; R. Amacher et al. : L'Hydroptère: A story of a dream. 2010. 21st HISWA International Symposium on Yacht Design and Yacht Construction, Amsterdam, The Netherlands, November 15-16, 2010.
J. Cugnoni; M. Galli : Representative Volume Element Size of Elastoplastic and Elastoviscoplastic Particle-Reinforced Composites with Random Microstructure; Computer Modeling in Engineering and Sciences. 2010.
M. Calmon; M. Farhat; P. Fua; K. Startchev; G. Bonnier et al. : L'HYDROPTERE: HOW MULTIDISCIPLINARY SCIENTIFIC RESEARCH MAY HELP BREAK THE SAILING SPEED RECORD. 2010. 2nd INTERNATIONAL CONFERENCE ON INNOVATION IN HIGH PERFORMANCE SAILING YACHTS (Innov'Sail), Lorient, France, June 30 - 1st July 1st, 2010.
B. Golaz; V. Michaud; S. Lavanchy; J. Cugnoni; J.-A. Månson : Durabilité et dimensionnement de collages composite-titane pour des applications marines ; JADH 09 - 15e Journées d’Etude sur l’Adhésion, Presqu’île de Giens, France, September 27 - October 2, 2009.
J. Cugnoni; M. L. Oyen; D. S. Chamock-Jones; G. Burton : Pressure-Regulated Gas Diffusion in Human Terminal Chorionic Villi.. 2009. 56th Annual Meeting of the Society-for-Gynecologic-Investigation, Glasgow, SCOTLAND, Mar 17-21, 2009. p. 284A-284A.
D. Karalekas; J. Cugnoni; J. Botsis : Monitoring of hygrothermal ageing effects in an epoxy resin using FBG sensor: A methodological study; Composites Science And Technology. 2009. DOI : 10.1016/j.compscitech.2008.11.028.
V. Sivasubramaniam; M. Galli; J. Cugnoni; J. Janczak-Rusch; J. Botsis : A Study of the Shear Response of a Lead-Free Composite Solder by Experimental and Homogenization Techniques; Journal Of Electronic Materials. 2009. DOI : 10.1007/s11664-009-0878-0.
M. Schwaar; T. Gmür; M. Matter; J. Cugnoni; A. Schorderet : Numerical-experimental identification of the elastic and dissipative properties in composite sandwich plates. 2009. 15th International Conference on Composite Structures ICCS 15, Porto, June 14-17, 2009. p. P186.
M. Matter; T. Gmür; J. Cugnoni; A. Schorderet : Numerical-experimental identification of the elastic and damping properties in composite plates; Composite Structures. 2009. DOI : 10.1016/j.compstruct.2009.03.001.
T. Gmür; A. Schorderet; J. Cugnoni : MAFE, a Code for Modal Analysis by Finite Elements (including Substructuring and Modal Synthesis).. 2009.
D. Karalekas; J. Cugnoni; J. Botsis : Monitoring of process induced strains in a single fibre composite using FBG sensor: A methodological study; Composites Part A-Applied Science And Manufacturing. 2008. DOI : 10.1016/j.compositesa.2008.04.010.
M. Lai; J. Botsis; D. Coric; J. Cugnoni : On the degree of conversion and coefficient of thermal expansion of a single fiber composite using a FBG sensor. 2008. 4th International Conference on Times of Polymers TOP and Composites, Ischia, ITALY, Sep 21-24, 2008. p. 135-137.
V. Sivasubramaniam; N. S. Bosco; J. Janczak-Rusch; J. Cugnoni; J. Botsis : Interfacial intermetallic growth and strength of composite lead-free solder alloy through isothermal aging; Journal Of Electronic Materials. 2008. DOI : 10.1007/s11664-008-0524-2.
H. W. A. Wiskott; J. Cugnoni; S. S. Scherrer; P. Ammann; J. Botsis et al. : Bone reactions to controlled loading of endosseous implants: a pilot study; Clinical Oral Implants Research. 2008. DOI : 10.1111/j.1600-0501.2008.01548.x.
A. M. Lajimi; J. Cugnoni; J. Botsis : Reliability Analysis of Lead-free Solders. 2008. World Congress on Engineering and Computer Science (WCECS 2008), San Francisco, CA, Oct 11-24, 2008. p. 397-401.
M. Galli; J. Cugnoni; J. Botsis; J. Janczak-Rusch : Identification of the matrix elastoplastic properties in reinforced active brazing alloys; Composites Part A-Applied Science And Manufacturing. 2008. DOI : 10.1016/j.compositesa.2008.03.007.
J. Frieden; J. Cugnoni; J. Botsis; T. Gmür; D. Coric : Characterization of dynamic response of composite plates with embedded FBG sensors. 2008. 4th International Conference on Composites Testing and Model Identification CompTest 2008, Dayton, October 20-22, 2008. p. P1-3.
J. Frieden; J. Cugnoni; T. Gmür; J. Botsis : Dynamic strain measurements of composite materials using embedded fibre Bragg grating sensors. 2008. 5th International Conference on Fracture of Polymers, Composites and Adhesives (5th ESIS TC4 Conference), Les Diablerets, September 7-11, 2008. p. P023.
M. Matter; T. Gmür; J. Cugnoni; A. Schorderet : Modal material identification method using a dissipative finite element model. 2008. 9th International Conference on Computational Structures Technology, Athens, September 2-5, 2008. p. P156.
L. Sorensen; J. Botsis; T. Gmür; J. Cugnoni : Characterisation of bridging tractions in mode-I delamination using distributed strain measurements and numerical modelling. 2008. 13th European Conference on Composite Materials, Stockholm, June 2-5, 2008. p. P517.
M. Matter; T. Gmür; J. Cugnoni; A. Schorderet : Evaluation of a dissipative finite element model for modal identification application. 2007. 7th International Conference on Structural Analysis of Advanced Materials ICSAM 2007, Patras, September 2-6, 2007. p. 11B1.
M. Sulmoni; T. Gmür; J. Cugnoni; M. Matter : Modal validation of sandwich shell finite elements based upon a p-order shear deformation theory including zigzag terms; International Journal for Numerical Methods in Engineering. 2007. DOI : 10.1002/nme.2301.
J. Cugnoni; J. Botsis; V. Sivasubramaniam; J. Janczak-Rush : Experimental and numerical studies on size and constraining effects in lead-free solder joints; Fatigue and Fracture of Engineering Materials and Structures. 2007. DOI : 10.1111/j.1460-2695.2006.01077.x.
J. Cugnoni; T. Gmür; A. Schorderet : Inverse method based on modal analysis for characterizing the constitutive properties of thick composite plates; Computers & Structures. 2007.
M. Matter; T. Gmür; J. Cugnoni; A. Schorderet : Improved modal characterization of the constitutive parameters in multilayered plates; Composites Science and Technology. 2007.
J. Cugnoni; J. Botsis; J. Janczak : Size and Constraining Effects in Lead-Free Solder Joints; Advanced Engineering Materials. 2006. DOI : 10.1002/adem.200400236.
M. Matter; T. Gmür; J. Cugnoni; A. Schorderet : Modal identification of the elastic properties in composite sandwich structures. 2006. 3rd International Conference on Composites Testing and Model Identification CompTest 2006, Porto, Portugal, April 10-12. p. 162-163.
J. Cugnoni; T. Gmür; A. Schorderet : A mixed numerical-experimental identification method for evaluating the constitutive parameters of composite laminated shells. 2006. p. 85-86.
M. Matter; T. Gmür; J. Cugnoni; A. Schorderet : Improved dynamic characterization of the elastic properties in composite plates. 2005. 12th International Conference on Composites/Nano Engineering ICCE-12, Santa Cruz de Tenerife, Spain, August 1-6, 2005.
J. Cugnoni / T. Gmür (Dir.) : Identification par recalage modal et fréquentiel des propriétés constitutives de coques en matériaux composites. Lausanne, EPFL, 2005. DOI : 10.5075/epfl-thesis-3106.
J. Cugnoni; T. Gmür; A. Schorderet : Modal validation of a set of C0 compatible composite shell elements; Composites Science & Technology. 2004.
J. Cugnoni; T. Gmür; A. Schorderet : Identification by modal analysis of composite structures modelled with FSDT and HSDT laminated shell finite elements; Composites Part A : Applied science and Manufacturing. 2004.
V. Herzig; J. Cugnoni; T. Lundström; T. Gmür : Tree stability : analysis of an in-situ impact test. 2004. September 13-17 2004.
J. Cugnoni; T. Gmür; A. Schorderet : Numerical-experimental identification of the elastic properties in composite shells. 2004. September 7-9 2004. p. P239.
J. Cugnoni; T. Gmür; A. Schorderet : Modal identification of composite structures modelled with FSDT and HSDT laminated shell finite elements. 2003. January 28-31 2003. p. P11.
J. Frieden; J. Cugnoni; J. Botsis; T. Gmür; D. Coric : Internal strain measurements in CFRP plates subjected to impact load using FBG sensors. 17th International Conference on Composite Materials ICCM-17, Edinburgh, July 27-31, 2009.
J. Botsis; T. Gmür; J. Cugnoni : Characterization of internal strains in polymeric materials for damage monitoring using embedded FBG sensors. International Conference on Adaptive Systems and Technologies (ICAST 2008), Ascona, october 6-9, 2008.
S. Kohler / J. Botsis; J. Cugnoni (Dir.) : Multiscale experimental characterisation and modelling of transverse cracking in thin-ply composites. Lausanne, EPFL, 2019. DOI : 10.5075/epfl-thesis-9132.
G. Frossard; J. Cugnoni; T. Gmur; J. Botsis : Ply thickness dependence of the intralaminar fracture in thin-ply carbon- epoxy laminates; COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING. 2018. DOI : 10.1016/j.compositesa.2018.03.001.
L. Mencattelli; M. Borotto; J. Cugnoni; R. Lazzeri; J. Botsis : Analysis and evaluation of friction effects on mode II delamination testing; COMPOSITE STRUCTURES. 2018. DOI : 10.1016/j.compstruct.2018.01.085.
N. Nasri / J. Botsis; J. Cugnoni (Dir.) : Effect of an adhesive layer on the mode I delamination in unidirectional CFRP bonded joints. Lausanne, EPFL, 2017. DOI : 10.5075/epfl-thesis-7858.
S. Zabihzadeh; J. Cugnoni; L. I. Duarte; S. Van Petegem; H. Van Swygenhoven : Deformation behavior of nano-porous polycrystalline silver. Part II: Simulations; Acta Materialia. 2017. DOI : 10.1016/j.actamat.2017.04.041.
G. Frossard; J. Cugnoni; T. Gmur; J. Botsis : An efficient method for fiber bridging traction identification based on the R-curve: Formulation and experimental validation; Composite Structures. 2017. DOI : 10.1016/j.compstruct.2017.04.032.
G. Frossard; J. Cugnoni; T. Gmur; J. Botsis : Mode I interlaminar fracture of carbon epoxy laminates: Effects of ply thickness; Composites Part A-Applied Science And Manufacturing. 2016. DOI : 10.1016/j.compositesa.2016.09.009.
M. Piccinini; J. Cugnoni; J. Botsis; P. Ammann; A. Wiskott : Numerical prediction of peri-implant bone adaptation: Comparison of mechanical stimuli and sensitivity to modeling parameters; Medical Engineering & Physics. 2016. DOI : 10.1016/j.medengphy.2016.08.008.
M. Piccinini; J. Cugnoni; J. Botsis; P. Ammann; A. Wiskott : Peri-implant bone adaptations to overloading in rat tibiae: experimental investigations and numerical predictions; Clinical Oral Implants Research. 2016. DOI : 10.1111/clr.12760.
E. Farmand-Ashtiani; J. Cugnoni; J. Botsis : Effects of large scale bridging in load controlled fatigue delamination of unidirectional carbon-epoxy specimens; Composites Science And Technology. 2016. DOI : 10.1016/j.compscitech.2016.10.022.
M. Maleki; J. Cugnoni; J. Botsis : Multi-scale modeling of elasto-plastic response of SnAgCu lead-free solder alloys at different ageing conditions: Effect of microstructure evolution, particle size effects and interfacial failure; Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2016. DOI : 10.1016/j.msea.2016.03.011.
M. Rheme; J. Botsis; J. Cugnoni; P. Navi : Mixed mode fracture behavior of welded wood joints investigated with the Arcan test; Wood Science And Technology. 2016. DOI : 10.1007/s00226-015-0782-0.
E. Farmand-Ashtiani; D. Alanis; J. Cugnoni; J. Botsis : Delamination in cross-ply laminates: Identification of traction-separation relations and cohesive zone modeling; Composites Science And Technology. 2015. DOI : 10.1016/j.compscitech.2015.09.025.
G. Frossard; J. Cugnoni; T. Gmür; I. Botsis : Fracture of thin-ply carbon-epoxy laminates: ply-thickness effects. 2015. 20th International Conference on Composite Materials ICCM20, Copenhagen, Denmark, July 19-24, 2015.
G. Frossard; M. Boesiger; J. Cugnoni; T. Gmür; I. Botsis : Mode I fracture of thin-ply carbon-epoxy laminates: effects of ply and specimen thickness. 2015. 7th International Conference on Composites Testing and Model Identification CompTest2015, Madrid, Spain, April 8-10, 2015. p. 36-37.
E. Guzman; J. Cugnoni; T. Gmür : Monitoring of composite structures using a network of integrated PVDF film transducers; Smart Materials and Structures. 2015. DOI : 10.1088/0964-1726/24/5/055017.
E. Farmand-Ashtiani; J. Cugnoni; J. Botsis : Specimen thickness dependence of large scale fiber bridging in mode I interlaminar fracture of carbon epoxy composite; International Journal Of Solids And Structures. 2015. DOI : 10.1016/j.ijsolstr.2014.03.031.
E. R. Guzman Solares; J. Cugnoni; T. Gmür : A new structural health monitoring (SHM) system using integrated polyvinylidene difluoride (PVDF) transducer networks. 2014. 65th International Astonautical Congress IAC2014, Toronto, Canada, September 29 - October 3, 2014.
G. Frossard; J. Cugnoni; T. Gmür; I. Botsis : Influence of the thin ply size on mode I and II energy release rate of unidirectional carbon epoxy laminates. 2014. 16th International Conference on Experimental Mechanics ICEM16, Cambridge, UK, July 7-11, 2014.
M. Piccinini; J. Cugnoni; J. Botsis; P. Ammann; A. Wiskott : Influence of gait loads on implant integration in rat tibiae: Experimental and numerical analysis; Journal Of Biomechanics. 2014. DOI : 10.1016/j.jbiomech.2014.08.023.
E. Croisier; S. Liang; T. Schweizer; S. Balog; M. Mionic et al. : A toolbox of oligopeptide-modified polymers for tailored elastomers; Nature Communications. 2014. DOI : 10.1038/ncomms5728.
R. Amacher; J. Cugnoni; J. Botsis; L. Sorensen; W. Smith et al. : Thin ply composites: Experimental characterization and modeling of size-effects; Composites Science And Technology. 2014. DOI : 10.1016/j.compscitech.2014.06.027.
M. Piccinini; J. Cugnoni; J. Botsis; G. Zacchetti; P. Ammann et al. : Factors affecting subject-specific finite element models of implant-fitted rat bone specimens: critical analysis of a technical protocol; Computer Methods In Biomechanics And Biomedical Engineering. 2014. DOI : 10.1080/10255842.2012.736502.
M. Piccinini / I. Botsis; J. Cugnoni (Dir.) : Prediction of peri-implant bone adaptation to mechanical environments. Lausanne, EPFL, 2014. DOI : 10.5075/epfl-thesis-6273.
E. Guzman; J. Cugnoni; T. Gmuer : Multi-factorial models of a carbon fibre/epoxy composite subjected to accelerated environmental ageing; Composite Structures. 2014. DOI : 10.1016/j.compstruct.2013.12.028.
M. Maleki; J. Cugnoni; J. Botsis : Isothermal Ageing of SnAgCu Solder Alloys: Three-Dimensional Morphometry Analysis of Microstructural Evolution and Its Effects on Mechanical Response; Journal Of Electronic Materials. 2014. DOI : 10.1007/s11664-014-3017-5.
M. Lai; J. Botsis; J. Cugnoni : Studies of hygrothermal degradation of a single fiber composite: An iterative approach with embedded optical sensors and numerical analysis; Composites Part B-Engineering. 2014. DOI : 10.1016/j.compositesb.2013.08.091.
E. R. Guzman Solares; J. Cugnoni; T. Gmür : Use of PVDF transducers as actuators for operational modal analysis on composite samples. 2013. 21st International Conference on Composites/Nano Engineering ICCE-21, Santa Cruz de Tenerife, Spain, July 21-27, 2013.
E. R. Guzman Solares; J. Cugnoni; T. Gmür : Quantification of damage due to environmental conditions on carbon fibre/epoxy composite samples. 2013. 6th International Conference on Composite Testing and Model Identification CompTest2013, Aalborg, Denmark, April 22-24, 2013. p. 103-104.
M. Rheme; J. Botsis; J. Cugnoni; P. Navi : Influence of the moisture content on the fracture characteristics of welded wood joint. Part 2: Mode II fracture; Holzforschung. 2013. DOI : 10.1515/hf-2012-0145.
M. Rheme; J. Botsis; J. Cugnoni; P. Navi : Influence of the moisture content on the fracture characteristics of welded wood joint. Part 1: Mode I fracture; Holzforschung. 2013. DOI : 10.1515/hf-2012-0144.
G. Zacchetti; A. Wiskott; J. Cugnoni; J. Botsis; P. Ammann : External Mechanical Microstimuli Modulate the Osseointegration of Titanium Implants in Rat Tibiae; Biomed Research International. 2013. DOI : 10.1155/2013/234093.
E. Guzman; J. Cugnoni; T. Gmuer; P. Bonhote; A. Schorderet : Survivability of integrated PVDF film sensors to accelerated ageing conditions in aeronautical/aerospace structures; Smart Materials And Structures. 2013. DOI : 10.1088/0964-1726/22/6/065020.
M. Maleki; J. Cugnoni; J. Botsis : Microstructure-based modeling of the ageing effect on the deformation behavior of the eutectic micro-constituent in SnAgCu lead-free solder; Acta Materialia. 2013. DOI : 10.1016/j.actamat.2012.09.033.
E. Farmand-Ashtiani; J. Cugnoni; J. Botsis : Monitoring and characterization of the interfacial fracture in sandwich composites with embedded multiplexed optical sensors; Composite Structures. 2013. DOI : 10.1016/j.compstruct.2012.08.059.
E. R. Guzman Solares; J. Cugnoni; T. Gmür : Accelerated isothermal and cyclic ageing of carbon fibre/epoxy composite panels with integrated PVDF sensors. 2012. 15th International Conference on Experimental Mechanics ICEM15, Porto, Portugal, July 22-27, 2012. p. 341-342.
H. W. A. Wiskott; P. Bonhote; J. Cugnoni; S. Durual; G. Zacchetti et al. : Implementation of the "loaded implant" model in the rat using a miniaturized setup - description of the method and first results; Clinical Oral Implants Research. 2012. DOI : 10.1111/j.1600-0501.2011.02349.x.
M. Maleki / I. Botsis; J. Cugnoni (Dir.) : Deformation and Damage in Lead-free Solder Joints. Lausanne, EPFL, 2012. DOI : 10.5075/epfl-thesis-5565.
M. Lai; J. Botsis; J. Cugnoni; D. Coric : An experimental-numerical study of moisture absorption in an epoxy; Composites Part A-Applied Science And Manufacturing. 2012. DOI : 10.1016/j.compositesa.2012.01.027.
G. Zacchetti; A. Wiskott; J. Cugnoni; I. Botsis; M. Piccinini et al. : External mechanical microstimuli improve osseointegration of titanium implants in rat proximal tibiae. 2012. 39th Annual Congress of the European-Calcified-Tissue-Society (ECTS), Stockholm, SWEDEN, May 19-23, 2012. p. S126-S126. DOI : 10.1016/j.bone.2012.02.390.
J. Frieden; J. Cugnoni; J. Botsis; T. Gmuer : Low energy impact damage monitoring of composites using dynamic strain signals from FBG sensors - Part II: Damage identification; Composite Structures. 2012. DOI : 10.1016/j.compstruct.2011.08.025.
J. Frieden; J. Cugnoni; J. Botsis; T. Gmuer : Low energy impact damage monitoring of composites using dynamic strain signals from FBG sensors - Part I: Impact detection and localization; Composite Structures. 2012. DOI : 10.1016/j.compstruct.2011.08.003.
M. Galli; J. Cugnoni; I. Botsis : Numerical And Statistical Estimates Of The Representative Volume Element Of Elastoplastic Random Composites; European Journal of Mechanics Series A Solids. 2012. DOI : 10.1016/j.euromechsol.2011.07.010.
J. Frieden; J. Cugnoni; I. Botsis; T. Gmür : Low-velocity impact damage identification in CFRP plates using inverse numerical-experimental optimization. 2011. 16th International Conference on Composite Structures ICCS16, Porto, Portugal, June 28-30, 2011.
J. Frieden; J. Cugnoni; I. Botsis; T. Gmür : Characterization of impact damage in fibre reinforced composite plates using embedded FBG sensors. 2011. 5th International Conference on Composite Testing and Model Identification Comptest 2011, EPFL, Lausanne, February 14-16, 2011. p. 157-158.
I. Botsis; T. Gmür; J. Cugnoni : Proceedings of the 5th International Conference on Composite Testing and Model identification CompTest2011. 2011. CompTest2011.
M. Matter; T. Gmur; J. Cugnoni; A. Schorderet : Identification of the elastic and damping properties in sandwich structures with a low core-to-skin stiffness ratio; Composite Structures. 2011. DOI : 10.1016/j.compstruct.2010.09.009.
S. Stutz; J. Cugnoni; J. Botsis : Studies of mode I delamination in monotonic and fatigue loading using FBG wavelength multiplexing and numerical analysis; Composites Science And Technology. 2011. DOI : 10.1016/j.compscitech.2010.12.016.
J. Frieden; J. Cugnoni; J. Botsis; T. Gmuer : Vibration-based characterization of impact induced delamination in composite plates using embedded FBG sensors and numerical modelling; Composites Part B-Engineering. 2011. DOI : 10.1016/j.compositesb.2011.02.021.
S. Stutz; J. Cugnoni; J. Botsis : Crack - fiber sensor interaction and characterization of the bridging tractions in mode I delamination; Engineering Fracture Mechanics. 2011. DOI : 10.1016/j.engfracmech.2011.01.014.
M. Maleki; J. Cugnoni; J. Botsis : On the Mutual Effect of Viscoplasticity and Interfacial Damage Progression in Interfacial Fracture of Lead-Free Solder Joints; Journal Of Electronic Materials. 2011. DOI : 10.1007/s11664-011-1718-6.
M. Galli; E. Fornasiere; J. Cugnoni; M. L. Oyen : Poroviscoelastic Characterization of Particle-Reinforced Gelatin Gels using Indentation and Homogenization; Journal of the Mechanical Behavior of Biomedical Materials. 2011. DOI : 10.1016/j.jmbbm.2011.01.009.
M. Bergomi; J. Cugnoni; M. Galli; I. Botsis; U. Belser et al. : Hydro-mechanical coupling in the periodontal ligament: A porohyperelastic finite element model; Journal of Biomechanics. 2011. DOI : 10.1016/j.jbiomech.2010.08.019.
J. Frieden; J. Cugnoni; I. Botsis; T. Gmür : Damage assessment in CFRP plates based on dynamic measurements with FBG sensors. 2010. 10th International Conference on Computational Structures Technology, Valencia, Spain, September 14-17, 2010.
J. Frieden; J. Cugnoni; J. Botsis; T. Gmuer; D. Coric : High-speed internal strain measurements in composite structures under dynamic load using embedded FBG sensors; Composite Structures. 2010. DOI : 10.1016/j.compstruct.2010.01.007.
M. Bergomi; J. Cugnoni; J. Botsis; U. C. Belser; H. W. A. Wiskott : The role of the fluid phase in the viscous response of bovine periodontal ligament; Journal Of Biomechanics. 2010. DOI : 10.1016/j.jbiomech.2009.12.020.
M. Bergomi; J. Cugnoni; H. W. A. Wiskott; P. Schneider; M. Stampanoni et al. : Three-dimensional morphometry of strained bovine periodontal ligament using synchrotron radiation-based tomography; Journal Of Anatomy. 2010. DOI : 10.1111/j.1469-7580.2010.01250.x.
M. Matter; T. Gmuer; J. Cugnoni; A. Schorderet : A PSDT shell finite element formulation including structural damping; Computers & Structures. 2010. DOI : 10.1016/j.compstruc.2010.04.008.
M. Lai; J. Cugnoni; J. Botsis : Analysis of hygrothermally induced fiber fracture in single fiber composite using fiber Bragg grating. 2010. 14th International Conference on Experimental Mechanics (ICEM14), Poitiers, FRANCE, Jul 04-09, 2010. p. -. DOI : 10.1051/epjconf/20100634001.
J.-M. Bourgeon; S. Dyen; D. Moyon; D. Schmäh; R. Amacher et al. : L'Hydroptère: A story of a dream. 2010. 21st HISWA International Symposium on Yacht Design and Yacht Construction, Amsterdam, The Netherlands, November 15-16, 2010.
J. Cugnoni; M. Galli : Representative Volume Element Size of Elastoplastic and Elastoviscoplastic Particle-Reinforced Composites with Random Microstructure; Computer Modeling in Engineering and Sciences. 2010.
M. Calmon; M. Farhat; P. Fua; K. Startchev; G. Bonnier et al. : L'HYDROPTERE: HOW MULTIDISCIPLINARY SCIENTIFIC RESEARCH MAY HELP BREAK THE SAILING SPEED RECORD. 2010. 2nd INTERNATIONAL CONFERENCE ON INNOVATION IN HIGH PERFORMANCE SAILING YACHTS (Innov'Sail), Lorient, France, June 30 - 1st July 1st, 2010.
B. Golaz; V. Michaud; S. Lavanchy; J. Cugnoni; J.-A. Månson : Durabilité et dimensionnement de collages composite-titane pour des applications marines ; JADH 09 - 15e Journées d’Etude sur l’Adhésion, Presqu’île de Giens, France, September 27 - October 2, 2009.
J. Cugnoni; M. L. Oyen; D. S. Chamock-Jones; G. Burton : Pressure-Regulated Gas Diffusion in Human Terminal Chorionic Villi.. 2009. 56th Annual Meeting of the Society-for-Gynecologic-Investigation, Glasgow, SCOTLAND, Mar 17-21, 2009. p. 284A-284A.
D. Karalekas; J. Cugnoni; J. Botsis : Monitoring of hygrothermal ageing effects in an epoxy resin using FBG sensor: A methodological study; Composites Science And Technology. 2009. DOI : 10.1016/j.compscitech.2008.11.028.
V. Sivasubramaniam; M. Galli; J. Cugnoni; J. Janczak-Rusch; J. Botsis : A Study of the Shear Response of a Lead-Free Composite Solder by Experimental and Homogenization Techniques; Journal Of Electronic Materials. 2009. DOI : 10.1007/s11664-009-0878-0.
M. Schwaar; T. Gmür; M. Matter; J. Cugnoni; A. Schorderet : Numerical-experimental identification of the elastic and dissipative properties in composite sandwich plates. 2009. 15th International Conference on Composite Structures ICCS 15, Porto, June 14-17, 2009. p. P186.
M. Matter; T. Gmür; J. Cugnoni; A. Schorderet : Numerical-experimental identification of the elastic and damping properties in composite plates; Composite Structures. 2009. DOI : 10.1016/j.compstruct.2009.03.001.
T. Gmür; A. Schorderet; J. Cugnoni : MAFE, a Code for Modal Analysis by Finite Elements (including Substructuring and Modal Synthesis).. 2009.
D. Karalekas; J. Cugnoni; J. Botsis : Monitoring of process induced strains in a single fibre composite using FBG sensor: A methodological study; Composites Part A-Applied Science And Manufacturing. 2008. DOI : 10.1016/j.compositesa.2008.04.010.
M. Lai; J. Botsis; D. Coric; J. Cugnoni : On the degree of conversion and coefficient of thermal expansion of a single fiber composite using a FBG sensor. 2008. 4th International Conference on Times of Polymers TOP and Composites, Ischia, ITALY, Sep 21-24, 2008. p. 135-137.
V. Sivasubramaniam; N. S. Bosco; J. Janczak-Rusch; J. Cugnoni; J. Botsis : Interfacial intermetallic growth and strength of composite lead-free solder alloy through isothermal aging; Journal Of Electronic Materials. 2008. DOI : 10.1007/s11664-008-0524-2.
H. W. A. Wiskott; J. Cugnoni; S. S. Scherrer; P. Ammann; J. Botsis et al. : Bone reactions to controlled loading of endosseous implants: a pilot study; Clinical Oral Implants Research. 2008. DOI : 10.1111/j.1600-0501.2008.01548.x.
A. M. Lajimi; J. Cugnoni; J. Botsis : Reliability Analysis of Lead-free Solders. 2008. World Congress on Engineering and Computer Science (WCECS 2008), San Francisco, CA, Oct 11-24, 2008. p. 397-401.
M. Galli; J. Cugnoni; J. Botsis; J. Janczak-Rusch : Identification of the matrix elastoplastic properties in reinforced active brazing alloys; Composites Part A-Applied Science And Manufacturing. 2008. DOI : 10.1016/j.compositesa.2008.03.007.
J. Frieden; J. Cugnoni; J. Botsis; T. Gmür; D. Coric : Characterization of dynamic response of composite plates with embedded FBG sensors. 2008. 4th International Conference on Composites Testing and Model Identification CompTest 2008, Dayton, October 20-22, 2008. p. P1-3.
J. Frieden; J. Cugnoni; T. Gmür; J. Botsis : Dynamic strain measurements of composite materials using embedded fibre Bragg grating sensors. 2008. 5th International Conference on Fracture of Polymers, Composites and Adhesives (5th ESIS TC4 Conference), Les Diablerets, September 7-11, 2008. p. P023.
M. Matter; T. Gmür; J. Cugnoni; A. Schorderet : Modal material identification method using a dissipative finite element model. 2008. 9th International Conference on Computational Structures Technology, Athens, September 2-5, 2008. p. P156.
L. Sorensen; J. Botsis; T. Gmür; J. Cugnoni : Characterisation of bridging tractions in mode-I delamination using distributed strain measurements and numerical modelling. 2008. 13th European Conference on Composite Materials, Stockholm, June 2-5, 2008. p. P517.
M. Matter; T. Gmür; J. Cugnoni; A. Schorderet : Evaluation of a dissipative finite element model for modal identification application. 2007. 7th International Conference on Structural Analysis of Advanced Materials ICSAM 2007, Patras, September 2-6, 2007. p. 11B1.
M. Sulmoni; T. Gmür; J. Cugnoni; M. Matter : Modal validation of sandwich shell finite elements based upon a p-order shear deformation theory including zigzag terms; International Journal for Numerical Methods in Engineering. 2007. DOI : 10.1002/nme.2301.
J. Cugnoni; J. Botsis; V. Sivasubramaniam; J. Janczak-Rush : Experimental and numerical studies on size and constraining effects in lead-free solder joints; Fatigue and Fracture of Engineering Materials and Structures. 2007. DOI : 10.1111/j.1460-2695.2006.01077.x.
J. Cugnoni; T. Gmür; A. Schorderet : Inverse method based on modal analysis for characterizing the constitutive properties of thick composite plates; Computers & Structures. 2007.
M. Matter; T. Gmür; J. Cugnoni; A. Schorderet : Improved modal characterization of the constitutive parameters in multilayered plates; Composites Science and Technology. 2007.
J. Cugnoni; J. Botsis; J. Janczak : Size and Constraining Effects in Lead-Free Solder Joints; Advanced Engineering Materials. 2006. DOI : 10.1002/adem.200400236.
M. Matter; T. Gmür; J. Cugnoni; A. Schorderet : Modal identification of the elastic properties in composite sandwich structures. 2006. 3rd International Conference on Composites Testing and Model Identification CompTest 2006, Porto, Portugal, April 10-12. p. 162-163.
J. Cugnoni; T. Gmür; A. Schorderet : A mixed numerical-experimental identification method for evaluating the constitutive parameters of composite laminated shells. 2006. p. 85-86.
M. Matter; T. Gmür; J. Cugnoni; A. Schorderet : Improved dynamic characterization of the elastic properties in composite plates. 2005. 12th International Conference on Composites/Nano Engineering ICCE-12, Santa Cruz de Tenerife, Spain, August 1-6, 2005.
J. Cugnoni / T. Gmür (Dir.) : Identification par recalage modal et fréquentiel des propriétés constitutives de coques en matériaux composites. Lausanne, EPFL, 2005. DOI : 10.5075/epfl-thesis-3106.
J. Cugnoni; T. Gmür; A. Schorderet : Modal validation of a set of C0 compatible composite shell elements; Composites Science & Technology. 2004.
J. Cugnoni; T. Gmür; A. Schorderet : Identification by modal analysis of composite structures modelled with FSDT and HSDT laminated shell finite elements; Composites Part A : Applied science and Manufacturing. 2004.
V. Herzig; J. Cugnoni; T. Lundström; T. Gmür : Tree stability : analysis of an in-situ impact test. 2004. September 13-17 2004.
J. Cugnoni; T. Gmür; A. Schorderet : Numerical-experimental identification of the elastic properties in composite shells. 2004. September 7-9 2004. p. P239.
J. Cugnoni; T. Gmür; A. Schorderet : Modal identification of composite structures modelled with FSDT and HSDT laminated shell finite elements. 2003. January 28-31 2003. p. P11.
J. Frieden; J. Cugnoni; J. Botsis; T. Gmür; D. Coric : Internal strain measurements in CFRP plates subjected to impact load using FBG sensors. 17th International Conference on Composite Materials ICCM-17, Edinburgh, July 27-31, 2009.
J. Botsis; T. Gmür; J. Cugnoni : Characterization of internal strains in polymeric materials for damage monitoring using embedded FBG sensors. International Conference on Adaptive Systems and Technologies (ICAST 2008), Ascona, october 6-9, 2008.
Enseignement & Phd
Enseignement
- Mechanical Engineering,
Programmes doctoraux
- Doctoral Program in Mechanics
Doctorants
Broggi Guillaume Clément
Mordasini Alexandre Vincent
Maleki Milad ...
Nasri Nassima ...
Piccinini Marco ...
Mordasini Alexandre Vincent
A dirigé les thèses de
Kohler Sébastien ...Maleki Milad ...
Nasri Nassima ...
Piccinini Marco ...
