John Richard Thome

EPFL STI-DO
ME A1 409 (Bâtiment ME)
Station 9
1015 Lausanne

Expertise

Single and two-phase heat transfer in microchannels; Pool and convective boiling of pure fluids and mixtures; Condensation of pure fluids and mixtures; Falling film evaporation and condensation; Heat transfer augmentation

Expertise

Single and two-phase heat transfer in microchannels; Pool and convective boiling of pure fluids and mixtures; Condensation of pure fluids and mixtures; Falling film evaporation and condensation; Heat transfer augmentation

Mission

The main fields of research at LTCM Heat and Mass Transfer Laboratory are: Single and two-phase heat transfer in microchannels; Pool and convective boiling of pure fluids and mixtures; Condensation of pure fluids and mixtures; Falling film evaporation and condensation; Heat transfer augmentation; Two-phase flows and modelling of flow regime transitions; Laminar flow heat transfer with enhancements; Flow visualization of two-phase phenomena and void fraction measurements with use of laser sheets; Boiling on tube bundle; Effects on lubricants of two-phase heat transfer.
John R. Thome is Professor of Heat and Mass Transfer at the Swiss Federal Institute of Technology in Lausanne (EPFL), Switzerland since 1998, where his primary interests of research are two-phase flow and heat transfer, covering both macro-scale and micro-scale heat transfer and enhanced heat transfer. He directs the Laboratory of Heat and Mass Transfer (LTCM) at the EPFL with a research staff of about 18-20 and is also Director of the Doctoral School in Energy. He received his Ph.D. at Oxford University, England in 1978. He is the author of four books: Enhanced Boiling Heat Transfer (1990), Convective Boiling and Condensation, 3rd Edition (1994), Wolverine Engineering Databook III (2004) and Nucleate Boiling on Micro-Structured Surfaces (2008). He received the ASME Heat Transfer Division's Best Paper Award in 1998 for a 3-part paper on two-phase flow and flow boiling heat transfer published in the Journal of Heat Transfer. He has received the J&E Hall Gold Medal from the U.K. Institute of Refrigeration in February, 2008 for his extensive research contributions on refrigeration heat transfer and more recently the 2010 ASME Heat Transfer Memorial Award. He has published widely on the fundamental aspects of microscale and macroscale two-phase flow and heat transfer and on enhanced boiling and condensation heat transfer.

Selected publications

Development of a diabatic two-phase flow pattern map for horizontal flow boiling.

Zurcher, O., D. Favrat, et al.
Published in International Journal of Heat and Mass Transfer 45(2): 291-301., 2002 in

Evaporation of refrigerants in a horizontal tube: an improved flow pattern dependent heat transfer model compared to ammonia data.

Zurcher, O., D. Favrat, et al.
Published in International Journal of Heat and Mass Transfer 45(2): 303-317., 2002 in

Infoscience

Thermal-Hydraulic Characterization of a Thermosyphon Cooling System for Highly Compact Edge MicroDataCenter

E. M. MinazzoG. RouazeJ. B. MarcinichenJ. R. ThomeF. Buining

JOURNAL OF ELECTRONIC PACKAGING. 2024. DOI : 10.1115/1.4065863.

Heat transfer of uncoated and nanostructure coated commercially micro-enhanced refrigeration tubes under pool boiling conditions

D. DicksonB. D. BockJ. R. THOME

Applied Thermal Engineering. 2023. DOI : 10.1016/j.applthermaleng.2023.121757.

Multiscale enhancement of refrigerant falling film boiling by combining commercially enhanced tubes with nanostructures

B. D. BockD. DicksonJ. R. THOME

Applied Thermal Engineering. 2023. DOI : 10.1016/j.applthermaleng.2023.121622.

Ultra-Compact Microscale Heat Exchanger for Advanced Thermal Management in Data Centers

R. L. AmalfiT. SalamonF. CataldoJ. B. MarcinichenJ. R. Thome

Journal Of Electronic Packaging. 2022. DOI : 10.1115/1.4052767.

One- and two-step semi-Lagrangian integrators for arbitrary Lagrangian-Eulerian-finite element two-phase flow simulations

G. R. AnjosG. P. OliveiraN. N. MangiavacchiJ. R. Thome

International Journal For Numerical Methods In Fluids. 2022. DOI : 10.1002/fld.5069.

Simulation and experimental validation of pulsating heat pipes

G. RouazeJ. B. MarcinichenF. CataldoP. AubinJ. R. Thome

Applied Thermal Engineering. 2021. DOI : 10.1016/j.applthermaleng.2021.117271.

Flow boiling heat transfer and two-phase flow phenomena of CO2 in macro-and micro-channel evaporators: Fundamentals, applications and engineering design

L. ChengG. XiaJ. R. Thome

Applied Thermal Engineering. 2021. DOI : 10.1016/j.applthermaleng.2021.117070.

Compact Thermosyphon Cooling System For High Heat Flux Servers: Validation Of Thermosyphon Simulation Code Considering New Test Data

R. HaynauJ. B. MarcinichenR. L. AmalfiF. CataldoJ. R. Thome

2021. ASME International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems (InterPACK), ELECTR NETWORK, Oct 26-28, 2021. DOI : 10.1115/IPACK2021-72620.

Novel pulsating heat pipe for high density power data centres: performance and flow regime analysis

F. CataldoY. C. CreaR. L. AmalfiJ. B. MarcinichenJ. R. Thome

2021. 20th InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), ELECTR NETWORK, Jun 01-04, 2021. p. 518 - 523. DOI : 10.1109/ITherm51669.2021.9503185.

Hybrid Two-Phase Cooling Technology For Next-Generation Servers: Thermal Performance Analysis

R. L. AmalfiF. P. FaraldoT. SalamonR. EnrightF. Cataldo  et al.

2021. 20th InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), ELECTR NETWORK, Jun 01-04, 2021. p. 423 - 430. DOI : 10.1109/ITherm51669.2021.9503288.

Operational Map And Thermal Performance Of A Thermosyphon Cooling System For Compact Servers

R. L. AmalfiC. H. HoangR. EnrightF. CataldoJ. B. Marcinichen  et al.

2021. ASME International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems (InterPACK), ELECTR NETWORK, Oct 26-28, 2021. DOI : 10.1115/IPACK2021-72612.

Professor Satish G. Kandlikar on His 70th Birthday

M. M. AwadD. AttingerA. BejanA. BeskokG. P. Celata  et al.

Journal Of Thermal Science And Engineering Applications. 2020. DOI : 10.1115/1.4048813.

Influencing factors on flow boiling of carbon dioxide in enhanced tubes and comparison with correlations

R. MastrulloA. W. MauroJ. R. ThomeG. P. VanoliL. Viscito

2020. 37th UIT Heat Transfer Conference / Symposium on Refrigerants - Heat Transfer and Applications, Padova, ITALY, Jun 24-26, 2019. DOI : 10.1088/1742-6596/1599/1/012010.

Design Of Passive Two-Phase Thermosyphons For Server Cooling

R. L. AmalfiJ. B. MarcinichenJ. R. ThomeF. Cataldo

2020. ASME International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, Anaheim, CA, Oct 07-09, 2019. DOI : 10.1115/IPACK2019-6386.

Professor Masahiro Kawaji on His 65th Birthday

M. M. AwadS. BanerjeeV. K. DhirP. D. MarcoS. G. Kandlikar  et al.

Journal Of Nuclear Engineering And Radiation Science. 2020. DOI : 10.1115/1.4045033.

Experimental Characterization of a Server-Level Thermosyphon for High-Heat Flux Dissipations

R. L. AmalfiF. CataldoJ. B. MarcinichenJ. R. Thome

2020. 19th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), ELECTR NETWORK, Jul 21-23, 2020. p. 402 - 409. DOI : 10.1109/ITherm45881.2020.9190186.

General Thermosyphon Simulation Code for Electronics Cooling Applications

J. B. MarcinichenR. L. AmalfiF. CataldoJ. R. Thome

2020. 19th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), ELECTR NETWORK, Jul 21-23, 2020. p. 389 - 395. DOI : 10.1109/ITherm45881.2020.9190310.

Implementation of Passive Two-Phase Cooling to an Entire Server Rack

F. CataldoR. L. AmalfiJ. B. MarcinichenJ. R. Thome

2020. 19th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), ELECTR NETWORK, Jul 21-23, 2020. p. 396 - 401. DOI : 10.1109/ITherm45881.2020.9190327.

Fundamental Issues, Technology Development, and Challenges of Boiling Heat Transfer, Critical Heat Flux, and Two-Phase Flow Phenomena with Nanofluids

L. ChengG. XiaQ. LiJ. R. Thome

Heat Transfer Engineering. 2019. DOI : 10.1080/01457632.2018.1470285.

Experimental Characterization of Different Condenser Technologies in a Passive Two-Phase Cooling System for Thermal Management of Electronics

C. FalsettiR. L. AmalfiT. SalamonJ. B. MarcinichenJ. R. Thome

2019. 18th IEEE InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Las Vegas, NV, May 28-31, 2019. p. 1296 - 1306. DOI : 10.1109/ITHERM.2019.8757231.

Micro-Two-Phase Electronics Cooling: Finally on Its Way

J. R. Thome

2019. 18th IEEE InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Las Vegas, NV, May 28-31, 2019. p. 1354 - 1363. DOI : 10.1109/ITHERM.2019.8757260.

Numerical Simulations of Pulsating Heat Pipes, Part 1: Modeling

P. AubinB. D'EntremontF. CataldoJ. B. MarcinichenR. L. Amalfi  et al.

2019. 18th IEEE InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Las Vegas, NV, May 28-31, 2019. p. 232 - 242. DOI : 10.1109/ITHERM.2019.8757388.

Experimental Performance of Completely Passive Single and Recirculating Loop Thermosyphon Cooling Systems using Low GWP R1234ze and R1234yf

F. CalaidoJ. R. Thome

2019. 18th IEEE InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Las Vegas, NV, May 28-31, 2019. p. 1180 - 1189. DOI : 10.1109/ITHERM.2019.8757374.

Numerical Simulations of Pulsating Heat Pipes, Part 2: Comparison to Experimental Data

P. AubinF. CataldoJ. B. MarcinichenR. L. AmalfiS. J. Kim  et al.

2019. 18th IEEE InterSociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Las Vegas, NV, May 28-31, 2019. p. 243 - 250. DOI : 10.1109/ITHERM.2019.8757341.

Moving mesh method for direct numerical simulation of two-phase flow with phase change

E. GrosG. AnjosJ. Thome

Applied Mathematics And Computation. 2018. DOI : 10.1016/j.amc.2018.07.052.

Experimental characterisation of the thermohydraulic performance of a micro-pin fin evaporator: Heat transfer, flow visualization and modelling

C. Falsetti / J. R. ThomeM. Magnini (Dir.)

Lausanne, EPFL, 2018. DOI : 10.5075/epfl-thesis-8423.

Thermal Interface Material Enablement of Off-Board Two-Phase Cooling

M. K. SmithR. L. AmalfiT. SalamonJ. R. Thome

2018. 17th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), San Diego, CA, May 29-Jun 01, 2018. p. 905 - 914. DOI : 10.1109/ITHERM.2018.8419656.

Two-Phase Flow Simulations within Plate Heat Exchangers

R. L. AmalfiJ. R. Thome

2018. 17th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), San Diego, CA, May 29-Jun 01, 2018. p. 487 - 496. DOI : 10.1109/ITHERM.2018.8419518.

Numerical Modelling of Two-Phase Flow with Moving Boundary Fitted Meshes

E. Gros / J. R. ThomeG. Rabello Dos Anjos (Dir.)

Lausanne, EPFL, 2018. DOI : 10.5075/epfl-thesis-8538.

Interface-fitted moving mesh method for axisymmetric two-phase flow in microchannels

E. GrosG. R. AnjosJ. R. Thome

International Journal For Numerical Methods In Fluids. 2018. DOI : 10.1002/fld.4413.

Design of a Two-Phase Gravity-Driven Micro-Scale Thermosyphon Cooling System for High-Performance Computing Data Centers

A. SeuretA. IranfarM. Zapater SanchoJ. R. ThomeD. Atienza Alonso

2018. The Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM), Marina San Diego, CA, USA, May 29 - June 1, 2018. p. 587 - 595. DOI : 10.1109/ITHERM.2018.8419531.

Flow Boiling Heat Transfer and Pressure Drops of R1234ze(E) in a Silicon Micro-pin Fin Evaporator

C. FalsettiM. MagniniJ. R. Thome

Journal Of Electronic Packaging. 2017. DOI : 10.1115/1.4037152.

An experimental study on flow boiling pressure drop in multi-microchannel evaporators with different refrigerants

H. HuangJ. R. Thome

Experimental Thermal And Fluid Science. 2017. DOI : 10.1016/j.expthermflusci.2016.08.030.

Two-phase mini-thermosyphon electronics cooling: Dynamic modeling, experimental validation and application to 2U servers

N. LamaisonC. L. OngJ. B. MarcinichenJ. R. Thome

Applied Thermal Engineering. 2017. DOI : 10.1016/j.applthermaleng.2016.08.198.

Role Of A Liquid Accumulator In A Passive Two-Phase Liquid Cooling System For Electronics: Experimental Analysis

N. LamaisonR. L. AmalfiJ. B. MarcinichenJ. R. ThomeT. Salamon

2017. ASME International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, San Francisco, CA, AUG 29-SEP 01, 2017. DOI : 10.1115/IPACK2017-74020.

Two-Phase Mini-Thermosyphon For Cooling Of Datacenters: Experiments, Modeling And Simulations

C. L. OngR. L. AmalfiJ. B. MarcinichenN. LamaisonJ. R. Thome

2017. ASME International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems, San Francisco, CA, AUG 29-SEP 01, 2017. DOI : 10.1115/IPACK2017-74030.

A new method for reducing local heat transfer data in multimicrochannel evaporators

H. HuangN. BorhaniN. LamaisonJ. R. Thome

International Journal Of Thermal Sciences. 2017. DOI : 10.1016/j.ijthermalsci.2017.01.023.

Professor Leonard L. Vasiliev on his the 80th birthday

S. KakacM. D. MikhailovR. M. CottaM. KavianyA. I. Leontiev  et al.

Applied Thermal Engineering. 2017. DOI : 10.1016/j.applthermaleng.2017.03.140.

Pressure drop prediction in annular two-phase flow in macroscale tubes and channels

A. CioncoliniJ. R. Thome

International Journal Of Multiphase Flow. 2017. DOI : 10.1016/j.ijmultiphaseflow.2016.11.003.

Experimental evaluation of the thermal performances of a thermosyphon cooling system rejecting heat by natural and forced convection

F. CataldoJ. R. Thome

Applied Thermal Engineering. 2017. DOI : 10.1016/j.applthermaleng.2017.08.166.

Two-phase operational maps, pressure drop, and heat transfer for flow boiling of R236fa in a micro-pin fin evaporator

C. FalsettiH. JafarpoorchekabM. MagniniN. BorhaniJ. R. Thome

International Journal Of Heat And Mass Transfer. 2017. DOI : 10.1016/j.ijheatmasstransfer.2016.11.038.

A Flexible Coupled Level Set and Volume of Fluid (flexCLV) method to simulate microscale two-phase flow in non-uniform and unstructured meshes

A. FerrariM. MagniniJ. R. Thome

International Journal Of Multiphase Flow. 2017. DOI : 10.1016/j.ijmultiphaseflow.2017.01.017.

Transient Data Processing of Flow Boiling Local Heat Transfer in a Multi-Microchannel Evaporator Under a Heat Flux Disturbance

H. HuangN. LamaisonJ. R. Thome

Journal Of Electronic Packaging. 2017. DOI : 10.1115/1.4035386.

Undulations on the surface of elongated bubbles in confined gas-liquid flows

M. MagniniA. FerrariJ. R. ThomeH. A. Stone

Physical Review Fluids. 2017. DOI : 10.1103/PhysRevFluids.2.084001.

Pore-scale analysis of the minimum liquid film thickness around elongated bubbles in confined gas-liquid flows

M. MagniniA. M. BeiselA. FerrariJ. R. Thome

Advances In Water Resources. 2017. DOI : 10.1016/j.advwatres.2017.08.020.

An updated three-zone heat transfer model for slug flow boiling in microchannels

M. MagniniJ. R. Thome

International Journal Of Multiphase Flow. 2017. DOI : 10.1016/j.ijmultiphaseflow.2017.01.015.

Two-Phase Mini-Thermosyphon Electronics Cooling, Part 1: Experimental Investigation

C. L. OngN. LamaisonJ. B. MarcinichenJ. R. Thome

2016. 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Las Vegas, NV, MAY 31-JUN 03, 2016. p. 574 - 581. DOI : 10.1109/ITHERM.2016.7517599.

Two-Phase Mini-Thermosyphon Electronics Cooling, Part 4: Application to 2U Servers

N. LamaisonJ. B. MarcinichenC. L. OngJ. R. Thome

2016. 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Las Vegas, NV, MAY 31-JUN 03, 2016. p. 599 - 609. DOI : 10.1109/ITHERM.2016.7517602.

Two-Phase Heat Transfer Mechanisms within Plate Heat Exchangers : Experiments, Modeling and Simulations

R. L. Amalfi / J. R. Thome (Dir.)

Lausanne, EPFL, 2016. DOI : 10.5075/epfl-thesis-6856.

Two-Phase Mini-Thermosyphon Electronics Cooling, Part 2: Model and Steady-State Validations

J. B. MarcinichenN. LamaisonC. L. OngJ. R. Thome

2016. 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Las Vegas, NV, MAY 31-JUN 03, 2016. p. 582 - 588. DOI : 10.1109/ITHERM.2016.7517600.

Innovative low-mass cooling systems for the ALICE ITS Upgrade detector at CERN

M. Gómez Marzoa / J. R. Thome (Dir.)

Lausanne, EPFL, 2016. DOI : 10.5075/epfl-thesis-6993.

Flow Boiling Pressure Drop and Heat Transfer of Refrigerants in Multi-microchannel Evaporators under Steady and Transient States

H. Huang / J. R. Thome (Dir.)

Lausanne, EPFL, 2016. DOI : 10.5075/epfl-thesis-7306.

Dynamic Numerical Microchannel Evaporator Model to Investigate Parallel Channel Instabilities

T. SaenenJ. R. Thome

Journal Of Electronic Packaging. 2016. DOI : 10.1115/1.4032490.

High resolution local heat transfer and pressure drop infrared measurements of two-phase flow of R245fa within a compact plate heat exchanger

R. L. AmalfiJ. R. ThomeV. SolotychJ. Kim

International Journal Of Heat And Mass Transfer. 2016. DOI : 10.1016/j.ijheatmasstransfer.2016.07.060.

Flow boiling and frictional pressure gradients in plate heat exchangers. Part 2: Comparison of literature methods to database and new prediction methods

R. L. AmalfiF. Vakili-FarahaniJ. R. Thome

International Journal Of Refrigeration-Revue Internationale Du Froid. 2016. DOI : 10.1016/j.ijrefrig.2015.07.009.

Two-Phase Mini-Thermosyphon Electronics Cooling, Part 3: Transient Modeling and Experimental Validation

N. LamaisonJ. B. MarcinichenC. L. OngJ. R. Thome

2016. 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Las Vegas, NV, MAY 31-JUN 03, 2016. p. 589 - 598. DOI : 10.1109/ITHERM.2016.7517601.

Flow boiling and frictional pressure gradients in plate heat exchangers. Part 1: Review and experimental database

R. L. AmalfiF. Vakili-FarahaniJ. R. Thome

International Journal Of Refrigeration-Revue Internationale Du Froid. 2016. DOI : 10.1016/j.ijrefrig.2015.07.010.

Boiling heat transfer and two-phase pressure drops within compact plate heat exchangers: Experiments and flow visualizations

V. SolotychD. LeeJ. KimR. L. AmalfiJ. R. Thome

International Journal Of Heat And Mass Transfer. 2016. DOI : 10.1016/j.ijheatmasstransfer.2015.11.037.

Critical heat flux: Performance of R1234yf, R1234ze and R134a in an aluminum multi-minichannel heat sink at high saturation temperatures

R. MastrulloA. W. MauroJ. R. ThomeG. P. VanoliL. Viscito

International Journal Of Thermal Sciences. 2016. DOI : 10.1016/j.ijthermalsci.2016.03.011.

Working fluid charge reduction. Part II: Supercritical CO2 gas cooler designed for light commercial appliances

J. B. MarcinichenJ. R. ThomeR. H. Pereira

International Journal Of Refrigeration-Revue Internationale Du Froid. 2016. DOI : 10.1016/j.ijrefrig.2015.12.018.

Thermal Response of Multi-Microchannel Evaporators During Flow Boiling of Refrigerants Under Transient Heat Loads With Flow Visualization

H. HuangN. BorhaniJ. R. Thome

Journal Of Electronic Packaging. 2016. DOI : 10.1115/1.4033487.

Working fluid charge reduction, part 1: CO2 fin-tube evaporator designed for light commercial appliances utilizing flow pattern based phenomenological prediction models

J. B. MarcinichenJ. R. ThomeR. H. Pereira

International Journal Of Refrigeration-Revue Internationale Du Froid. 2016. DOI : 10.1016/j.ijrefrig.2015.12.017.

Unified Modeling Suite for Two-Phase Flow, Convective Boiling, and Condensation in Macro- and Microchannels

J. R. ThomeA. Cioncolini

2016. 4th International Conference on Micro and Nano Flows, Univ Coll London, London, ENGLAND, SEP 07-10, 2014. p. 1148 - 1157. DOI : 10.1080/01457632.2015.1112212.

Experimental flow boiling heat transfer in a small polyimide channel

M. G. MarzoaG. RibatskiJ. R. Thome

Applied Thermal Engineering. 2016. DOI : 10.1016/j.applthermaleng.2016.05.016.

Local measurements and a new flow pattern based model for subcooled and saturated flow boiling heat transfer in multi-microchannel evaporators

H. HuangJ. R. Thome

International Journal Of Heat And Mass Transfer. 2016. DOI : 10.1016/j.ijheatmasstransfer.2016.07.074.

High resolution infrared measurements of single-phase flow of R245fa and R236fa within a compact plate heat exchanger, Part 1: Experimental setup and pressure drop results

R. L. AmalfiJ. R. Thome

Applied Thermal Engineering. 2016. DOI : 10.1016/j.applthermaleng.2015.09.079.

High resolution infrared measurements of single-phase flow of R245fa and R236fa within a compact plate heat exchanger, Part 2: Heat transfer results

R. L. AmalfiJ. R. Thome

Applied Thermal Engineering. 2016. DOI : 10.1016/j.applthermaleng.2015.11.010.

Operational regimes in a closed loop pulsating heat pipe

G. SpinatoN. BorhaniJ. R. Thome

International Journal Of Thermal Sciences. 2016. DOI : 10.1016/j.ijthermalsci.2015.11.006.

A CFD study of the parameters influencing heat transfer in microchannel slug flow boiling

M. MagniniJ. R. Thome

International Journal Of Thermal Sciences. 2016. DOI : 10.1016/j.ijthermalsci.2016.06.032.

Development of interconnected silicon micro-evaporators for the on-detector electronics cooling of the future ITS detector in the ALICE experiment at LHC

A. FrancesconG. RomagnoliA. MapelliP. PetagnaC. Gargiulo  et al.

Applied Thermal Engineering. 2016. DOI : 10.1016/j.applthermaleng.2015.09.013.

A study of gravitational effects on single elongated vapor bubbles

A. ScammellJ. KimM. MagniniJ. R. Thome

International Journal Of Heat And Mass Transfer. 2016. DOI : 10.1016/j.ijheatmasstransfer.2016.04.034.

Characterization of the velocity fields generated by flow initialization in the CFD simulation of multiphase flows

M. MagniniB. PulvirentiJ. Thome

Applied Mathematical Modelling. 2016. DOI : 10.1016/j.apm.2016.02.023.

Experimental investigation on flow boiling pressure drop and heat transfer of R1233zd(E) in a multi-microchannel evaporator

H. HuangN. BorhaniJ. R. Thome

International Journal Of Heat And Mass Transfer. 2016. DOI : 10.1016/j.ijheatmasstransfer.2016.03.051.

A pragmatic approach towards modeling microchannel condensation and evaporation

N. E. Antonsen / J. R. Thome (Dir.)

Lausanne, EPFL, 2015. DOI : 10.5075/epfl-thesis-6532.

Understanding the self-sustained oscillating two-phase flow motion in a closed loop pulsating heat pipe

G. SpinatoN. BorhaniJ. R. Thome

Energy. 2015. DOI : 10.1016/j.energy.2015.07.119.

Computational Study of Saturated Flow Boiling Within a Microchannel in the Slug Flow Regime

M. MagniniJ. R. Thome

Journal of Heat Transfer. 2015. DOI : 10.1115/1.4031234.

Design and packaging of a highly integrated microreactor system for high-temperature on-board hydrogen production

B. JiangA. J. Santis-AlvarezP. MuraltD. PoulikakosN. Borhani  et al.

Chemical Engineering Journal. 2015. DOI : 10.1016/j.cej.2015.03.133.

ALE/finite element modeling of an unconfined bubble plume in periodic domain: bubble shape and oscillation analysis

G. P. OliveiraG. AnjosJ. PontesN. MangiavacchiJ. R. Thome

Journal Of The Brazilian Society Of Mechanical Sciences And Engineering. 2015. DOI : 10.1007/s40430-015-0320-x.

An indirect criterion for the laminar to turbulent flow transition in shear-driven annular liquid films

A. CioncoliniD. Del ColJ. R. Thome

International Journal Of Multiphase Flow. 2015. DOI : 10.1016/j.ijmultiphaseflow.2015.05.002.

Dynamics of isolated confined air bubbles in liquid flows through circular microchannels: an experimental and numerical study

S. KhodaparastM. MagniniN. BorhaniJ. R. Thome

Microfluidics and Nanofluidics. 2015. DOI : 10.1007/s10404-015-1566-4.

Time-strip visualization and thermo-hydrodynamics in a Closed Loop Pulsating Heat Pipe

G. SpinatoN. BorhaniB. P. D'EntremontJ. R. Thome

Applied Thermal Engineering. 2015. DOI : 10.1016/j.applthermaleng.2014.12.045.

Micro Particle Shadow Velocimetry (µPSV) of Single- and Two-phase Flows through Microchannels

S. Khodaparast / J. R. ThomeN. Borhani (Dir.)

Lausanne, EPFL, 2014. DOI : 10.5075/epfl-thesis-6222.

3D Integrated Architectures for Microelectronic Two-Phase Flow Cooling Applications

Y. Madhour / J. R. ThomeB. Michel (Dir.)

Lausanne, EPFL, 2014. DOI : 10.5075/epfl-thesis-6323.

Application of micro particle shadow velocimetry mu PSV to two-phase flows in microchannels

S. KhodaparastN. BorhaniJ. R. Thome

International Journal Of Multiphase Flow. 2014. DOI : 10.1016/j.ijmultiphaseflow.2014.02.005.

Thermo-Electric Analogy Method for Computing Transient Heat Transfer in a New Reciprocating Finned Piston Compressor

M. HeidariA. RuferJ. R. Thome

2014. IHTC-15 : The 15th International Heat Transfer Conference, Kyoto, Japan, 10-15 August 2014.

Experimental study on two-phase heat transfer and pressure drop in compact heat exchangers

F. Vakili Farahani / J. R. Thome (Dir.)

Lausanne, EPFL, 2014. DOI : 10.5075/epfl-thesis-6298.

Intensification of highly exothermic fast reaction by multi-injection microstructured reactor

J. HaberB. JiangT. MaederN. BorhaniJ. Thome  et al.

Chemical Engineering and Processing: Process Intensification. 2014. DOI : 10.1016/j.cep.2014.02.007.

Asymmetric annular flow in horizontal circular macro-channels: Basic modeling of liquid film distribution and heat transfer around the tube perimeter in convective boiling

A. W. MauroA. CioncoliniJ. R. ThomeR. Mastrullo

International Journal Of Heat And Mass Transfer. 2014. DOI : 10.1016/j.ijheatmasstransfer.2014.06.021.

Dynamic Modeling and Experimental Evaluation of a Controlled Two-Phase On-Chip Cooling System Designed for High Efficiency Datacenters

N. Lamaison / J. R. ThomeJ. B. Marcinichen (Dir.)

Lausanne, EPFL, 2014. DOI : 10.5075/epfl-thesis-6301.

Boiling Augmentation With Micro/Nanostructured Surfaces: Current Status And Research Outlook

S. BhavnaniV. NarayananW. QuM. JensenS. Kandlikar  et al.

Nanoscale And Microscale Thermophysical Engineering. 2014. DOI : 10.1080/15567265.2014.923074.

Intermittent dewetting and dryout of annular flows

N. BorhaniJ. R. Thome

International Journal Of Multiphase Flow. 2014. DOI : 10.1016/j.ijmultiphaseflow.2014.04.009.

Sudden expansions in circular microchannels: flow dynamics and pressure drop

S. KhodaparastN. BorhaniJ. R. Thome

Microfluidics And Nanofluidics. 2014. DOI : 10.1007/s10404-013-1321-7.

Dynamic flow control and performance comparison of different concepts of two-phase on-chip cooling cycles

J. B. MarcinichenD. WuS. ParedesJ. R. ThomeB. Michel

Applied Energy. 2014. DOI : 10.1016/j.apenergy.2013.09.018.

A new type of flow structure in cocurrent adiabatic vertically downward air-water flow: Membrane flow

M. MilanN. BorhaniJ. R. Thome

International Journal Of Multiphase Flow. 2014. DOI : 10.1016/j.ijmultiphaseflow.2013.09.010.

Proposed models, ongoing experiments, and latest numerical simulations of microchannel two-phase flow boiling

S. SzczukiewiczM. MagniniJ. R. Thome

International Journal of Multiphase Flow. 2014. DOI : 10.1016/j.ijmultiphaseflow.2013.10.014.

3D ALE Finite-Element Method for Two-Phase Flows With Phase Change

G. AnjosN. MangiavacchiN. BorhaniJ. R. Thome

Heat Transfer Engineering. 2014. DOI : 10.1080/01457632.2013.833407.

A 3D moving mesh Finite Element Method for two-phase flows

G. R. AnjosN. BorhaniN. MangiavacchiJ. R. Thome

Journal Of Computational Physics. 2014. DOI : 10.1016/j.jcp.2014.03.067.

Flow boiling data and prediction method for enhanced boiling tubes and tube bundles with R-134a and R-236fa including a comparison with falling film evaporation

E. Van RooyenJ. R. Thome

International Journal Of Refrigeration-Revue Internationale Du Froid. 2014. DOI : 10.1016/j.ijrefrig.2013.03.016.

Modeling of Two-Phase Evaporative Heat Transfer in Three-Dimensional Multicavity High Performance Microprocessor Chip Stacks

Y. MadhourB. P. D'EntremontJ. B. MarcinichenB. MichelJ. R. Thome

Journal Of Electronic Packaging. 2014. DOI : 10.1115/1.4027436.

Thermo-Hydrodynamics in a Closed Loop Pulsating Heat Pipe

G. Spinato / J. R. ThomeN. Borhani (Dir.)

Lausanne, EPFL, 2014. DOI : 10.5075/epfl-thesis-6491.

Adiabatic vertical downward air-water flow pattern map: influence of inlet device, flow development length and hysteresis effects

M. MilanN. BorhaniJ. R. Thome

International Journal of Multiphase Flow. 2013. DOI : 10.1016/j.ijmultiphaseflow.2013.06.003.

Two-phase flow operational maps for multi-microchannel evaporators

S. SzczukiewiczN. BorhaniJ. R. Thome

International Journal of Heat and Fluid Flow. 2013. DOI : 10.1016/j.ijheatfluidflow.2013.03.006.

Numerical investigation of hydrodynamics and heat transfer of elongated bubbles during flow boiling in a microchannel

M. MagniniB. PulvirentiJ. R. Thome

International Journal of Heat and Mass Transfer. 2013. DOI : 10.1016/j.ijheatmasstransfer.2012.12.010.

Editorial: Eci Eighth International Conference on Boiling and Condensation Heat Transfer

J. R. Thome

Experimental Heat Transfer. 2013. DOI : 10.1080/08916152.2012.737263.

Fine-resolution two-phase flow heat transfer coefficient measurements of refrigerants in multi-microchannel evaporators

S. SzczukiewiczN. BorhaniJ. R. Thome

International Journal Of Heat And Mass Transfer. 2013. DOI : 10.1016/j.ijheatmasstransfer.2013.08.078.

Two-Phase Flow Control of Electronics Cooling With Pseudo-CPUs in Parallel Flow Circuits: Dynamic Modeling and Experimental Evaluation

N. LamaisonJ. B. MarcinichenJ. R. Thome

Journal Of Electronic Packaging. 2013. DOI : 10.1115/1.4024590.

Infrared imaging of temperature profiles in microreactors for fast and exothermic reactions

J. HaberM. N. KashidN. BorhaniJ. ThomeU. Krtschil  et al.

Chemical Engineering Journal. 2013. DOI : 10.1016/j.cej.2012.10.021.

Integration of Intra Chip Stack Fluidic Cooling using Thin-Layer Solder Bonding

Y. MadhourM. ZervasG. SchlottigT. BrunschwilerY. Leblebici  et al.

2013. IEEE International 3D Systems Integration Conference (3DIC), San Francisco, CA, USA, October 2-4, 2013. p. 1 - 8. DOI : 10.1109/3DIC.2013.6702343.

Experimental Evaluation of a Controlled Hybrid Two-Phase Multi-Microchannel Cooling and Heat Recovery System Driven by Liquid Pump and Vapor Compressor

D. WuJ. B. MarcinichenJ. R. Thome

International Journal of Refrigeration. 2013. DOI : 10.1016/j.ijrefrig.2012.11.011.

Two-phase heat transfer and high-speed visualization of refrigerant flows in 100 × 100 μm2 silicon multi-microchannels

S. SzczukiewiczN. BorhaniJ. R. Thome

International Journal of Refrigeration. 2013. DOI : 10.1016/j.ijrefrig.2012.11.014.

Critical Heat Flux of R134a and R245fa Inside Small-Diameter Tubes

C. Bigonha TibiriçaS. SzczukiewiczG. RibatskiJ. R. Thome

Heat Transfer Engineering. 2013. DOI : 10.1080/01457632.2012.722457.

Microchannel Flow Boiling Heat Transfer, Update on the Latest Experimental and Numerical Contributions

J. R. ThomeS. SzczukiewiczM. Magnini

2013. 4th IIR Conference on Thermophysical Properties and Transfer Processes of Refrigerants, Delft, the Netherlands, June 17-19, 2013.

Numerical modeling of the effects of oil on annular laminar film condensation in minichannels

S. NebuloniJ. R. Thome

International Journal Of Refrigeration-Revue Internationale Du Froid. 2013. DOI : 10.1016/j.ijrefrig.2012.12.013.

Liquid film circumferential asymmetry prediction in horizontal annular two-phase flow

A. CioncoliniJ. R. Thome

International Journal Of Multiphase Flow. 2013. DOI : 10.1016/j.ijmultiphaseflow.2012.12.003.

Unified mechanistic multiscale mapping of two-phase flow patterns in microchannels

J. R. ThomeA. Bar-CohenR. RevellinI. Zun

Experimental Thermal And Fluid Science. 2013. DOI : 10.1016/j.expthermflusci.2012.09.012.

Experimental study on flow boiling heat transfer of multiport tubes with R245fa and R1234ze(E)

F. Vakili FarahaniB. AgostiniJ. R. Thome

International Journal of Refrigeration. 2013. DOI : 10.1016/j.ijrefrig.2012.12.007.

Numerical investigation of the influence of leading and sequential bubbles on slug flow boiling within a microchannel

M. MagniniB. PulvirentiJ. R. Thome

International Journal of Thermal Sciences. 2013. DOI : 10.1016/j.ijthermalsci.2013.04.018.

Effect of hot spots in microstructured reactors on product distribution during quasi-instantaneous exothermic reactions

J. HaberB. JiangN. BorhaniT. MaederJ. R. Thome  et al.

9th European Congress of Chemical Engineering (ECCE), The Hague, Holland, 21-24.4.2013.

Advances in Electronics Cooling

J. B. MarcinichenJ. A. OlivierN. LamaisonJ. R. Thome

Heat Transfer Engineering. 2013. DOI : 10.1080/01457632.2012.721316.

STEAM: a fast compact thermal model for two-phase cooling of integrated circuits

A. SridharY. MadhourD. AtienzaT. BrunschwilerJ. Thome

2013. 32nd IEEE/ACM International Conference on Computer-Aided Design (ICCAD), San Jose. California, USA, November 18-21, 2003. p. 256 - 263. DOI : 10.1109/ICCAD.2013.6691127.

A micro particle shadow velocimetry (mu PSV) technique to measure flows in microchannels

S. KhodaparastN. BorhaniG. TagliabueJ. R. Thome

Experiments In Fluids. 2013. DOI : 10.1007/s00348-013-1474-x.

Pressure drop data and prediction method for enhanced external boiling tube bundles with R-134a and R-236fa

E. Van RooyenJ. R. Thome

International Journal Of Refrigeration-Revue Internationale Du Froid. 2013. DOI : 10.1016/j.ijrefrig.2013.03.022.

On-chip two-phase cooling of datacenters: Cooling system and energy recovery evaluation

J. B. MarcinichenJ. A. OlivierJ. R. Thome

Applied Thermal Engineering. 2012. DOI : 10.1016/j.applthermaleng.2011.12.008.

Two-phase frictional pressure drops in U-bends and contiguous straight tubes for different refrigerants, orientations, tube, and bend diameters: Part 1. Experimental results (RP-1444)

R. J. D. S. LimaJ. R. Thome

Hvac&R Research. 2012. DOI : 10.1080/10789669.2012.672362.

On-Chip Cooling of Hot-Spots with a Copper Micro-Evaporator

E. Costa-PatryJ. R. Thome

2012. 28th Annual IEEE Semiconductor Thermal Measurement and Management Symposium (SEMI-THERM). p. 125 - 129. DOI : 10.1109/STHERM.2012.6188837.

Two-phase frictional pressure drops in U-bends and contiguous straight tubes for different refrigerants, orientations, tube, and bend diameters: Part 2. New models (RP-1444)

R. J. D. S. LimaJ. R. Thome

Hvac&R Research. 2012. DOI : 10.1080/10789669.2012.672363.

On-Chip Two-Phase Cooling with Refrigerant 85 mu m-Wide Multi-Microchannel Evaporator Under Hot-Spot Conditions

E. Costa-PatryS. NebuloniJ. OlivierJ. R. Thome

Ieee Transactions On Components Packaging And Manufacturing Technology. 2012. DOI : 10.1109/TCPMT.2011.2173572.

Two-Phase Control of On-Chip Two-Phase Cooling Systems of Servers

J. B. MarcinichenJ. R. Thome

2012. 28th Semiconductor Thermal Measurement, Modeling and Management Symposium, San Jose, CA, USA, March 18-22, 2012. p. 29 - 35. DOI : 10.1109/STHERM.2012.6188822.

Boiling on a Tube Bundle: Part II-Heat Transfer and Pressure Drop

E. van RooyenF. AgostiniN. BorhaniJ. R. Thome

Heat Transfer Engineering. 2012. DOI : 10.1080/01457632.2012.654726.

Characterization of hot spots in microstructured reactors for fast and exothermic reactions in mixing regime

J. HaberM. N. KashidN. BorhaniB. JiangT. Maeder  et al.

International Symposium on Chemical Reaction Engineering (ISCRE-22), Maastricht (NL), 2-5.9.2012.

Saturated flow boiling heat transfer and critical heat flux in small horizontal flattened tubes

C. B. TibiricaG. RibatskiJ. R. Thome

International Journal Of Heat And Mass Transfer. 2012. DOI : 10.1016/j.ijheatmasstransfer.2012.08.017.

Two-Phase Flow Boiling in a Single Layer of Future High-Performance 3D Stacked Computer Chips

S. SzczukiewiczN. BorhaniJ. R. Thome

2012. 13th IEEE ITHERM Conference, San Diego, California, USA, May 30 - June 1, 2012. p. 597 - 605. DOI : 10.1109/ITHERM.2012.6231483.

Experimental study on condensation heat transfer in vertical minichannels for new refrigerant R1234ze(E) versus R134a and R236fa (vol 35, pg 442, 2011)

J. E. ParkF. Vakili-FarahaniL. ConsoliniJ. R. Thome

Experimental Thermal And Fluid Science. 2012. DOI : 10.1016/j.expthermflusci.2012.02.010.

Characterization of Annular Two-Phase Down Flow Using Non Intrusive Optical Techniques for Flow Patterns, Entrainment, Film Thickness and Velocity Profile

M. Milan / J. R. ThomeN. Borhani (Dir.)

Lausanne, EPFL, 2012. DOI : 10.5075/epfl-thesis-5604.

Modified Wilson Plots for Enhanced Heat Transfer Experiments: Current Status and Future Perspectives

E. van RooyenM. ChristiansJ. R. Thome

Heat Transfer Engineering. 2012. DOI : 10.1080/01457632.2012.611767.

CO2 and R410A: Two-phase flow visualizations and flow boiling measurements at medium (0.50) reduced pressure

R. MastrulloA. W. MauroJ. R. ThomeG. P. Vanoli

2012. ASME/ATI/UIT Conference on Thermal and Environmental Issues in Energy Systems. p. 2 - 8. DOI : 10.1016/j.applthermaleng.2011.10.021.

Falling film evaporation on enhanced tubes, part 1: Experimental results for pool boiling, onset-of-dryout and falling film evaporation

M. ChristiansJ. R. Thome

International Journal Of Refrigeration-Revue Internationale Du Froid. 2012. DOI : 10.1016/j.ijrefrig.2011.10.020.

Thermal and Visual Operational Characteristics of Multi-Microchannel Evaporators using Refrigerants

S. Szczukiewicz / J. R. ThomeN. Borhani (Dir.)

Lausanne, EPFL, 2012. DOI : 10.5075/epfl-thesis-5594.

Entrained liquid fraction prediction in adiabatic and evaporating annular two-phase flow

A. CioncoliniJ. R. Thome

Nuclear Engineering and Design. 2012. DOI : 10.1016/j.nucengdes.2011.11.014.

A 3D ALE Finite Element Method for Two-Phase Flows with Phase Change

G. Rabello Dos Anjos / J. R. ThomeN. Borhani (Dir.)

Lausanne, EPFL, 2012. DOI : 10.5075/epfl-thesis-5426.

Flow pattern maps for convective boiling of CO2 and R410A in a horizontal smooth tube: Experiments and new correlations analyzing the effect of the reduced pressure

R. MastrulloA. W. MauroJ. R. ThomeD. TotoG. P. Vanoli

International Journal of Heat and Mass Transfer. 2012. DOI : 10.1016/j.ijheatmasstransfer.2011.11.003.

Transient Simulation of Two-Phase On-chip Liquid Pump Cycle for Processor's Cooling

N. LamaisonJ. B. MarcinichenJ. R. Thome

8th International Conference on Boiling and Condensation Heat Transfer, Lausanne, Switzerland, June 3-7, 2012.

Boiling on a Tube Bundle: Part I-Flow Visualization and Onset of Dryout

E. van RooyenF. AgostiniN. BorhaniJ. R. Thome

Heat Transfer Engineering. 2012. DOI : 10.1080/01457632.2012.654724.

Numerical Modeling of the Conjugate Heat Transfer Problem for Annular Laminar Film Condensation in Microchannels

S. NebuloniJ. R. Thome

2012. ASME Micro/Nanoscale Heat and Mass Transfer International Conference (MNHMT), Shanghai, PEOPLES R CHINA, Dec 18-21, 2009. DOI : 10.1115/1.4005712.

Two-phase flow patterns in U-bends and their contiguous straight tubes for different orientations, tube and bend diameters

R. J. D. S. LimaJ. R. Thome

International Journal Of Refrigeration-Revue Internationale Du Froid. 2012. DOI : 10.1016/j.ijrefrig.2012.02.002.

Experimental Evaluation and Control of Two-Phase Multi-Microchannel Evaporator Cooling Systems for High Efficiency Data Center

D. Wu / J. R. ThomeJ. B. Marcinichen (Dir.)

Lausanne, EPFL, 2012. DOI : 10.5075/epfl-thesis-5588.

Two-Phase On-Chip Cooling Systems for Green Data Centers

J. R. ThomeJ. B. MarcinichenJ. A. Olivier

Efficient Thermal Management of Data Centers; Springer Science, 2012. p. 513 - 567.

Falling film evaporation on enhanced tubes, part 2: Prediction methods and visualization

M. ChristiansJ. R. Thome

International Journal Of Refrigeration-Revue Internationale Du Froid. 2012. DOI : 10.1016/j.ijrefrig.2011.10.019.

Experimental Evaluation of Hybrid Two-Phase Multi-Microchannel Cooling and Heat Recovery System Driven by Liquid Pump and Vapor Compressor

D. WuJ. B. MarcinichenJ. R. Thome

2012. 8th International Conference on Boiling and Condensation Heat Transfer, Lausanne, Switzerland, June 3-7, 2012.

Flow Boiling Characteristics for R1234ze(E) in 1.0 and 2.2 mm Circular Channels

C. B. TibiricaG. RibatskiJ. R. Thome

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME. 2012. DOI : 10.1115/1.4004933.

EXPERIMENTAL STUDY ON FLOW BOILING HEAT TRANSFER OF MULTIPORT TUBES WITH R245fa AND R1234ze(E)

F. Vakili FarahaniB. AgostiniJ. R. Thome

2012. 8th ECI International Conference on Boiling and Condensation Heat Transfer, Lausanne, Switzerland, June 3-7, 2012.

Two-Phase Heat Transfer and High-Speed Visualization of Refrigerant Flows in 100 x 100 μm2 Silicon Multi-Microchannels

S. SzczukiewiczN. BorhaniJ. R. Thome

2012. ECI 8th International Conference on Boiling and Condensation Heat Transfer, Lausanne, VD, Switzerland, June 3-7, 2012.

New prediction methods for CO2 evaporation inside tubes: Part I - A two-phase flow pattern map and a flow pattern based phenomenological model for two-phase flow frictional pressure drops (vol 51, pg 111, 2008)

L. ChengG. RibatskiJ. M. QuibenJ. R. Thome

International Journal Of Heat And Mass Transfer. 2012. DOI : 10.1016/j.ijheatmasstransfer.2012.05.044.

Void fraction prediction in annular two-phase flow

A. CioncoliniJ. R. Thome

International Journal Of Multiphase Flow. 2012. DOI : 10.1016/j.ijmultiphaseflow.2012.03.003.

Boiling on a Tube Bundle : Heat Transfer, Pressure Drop and Flow Patterns

E. Van Rooyen / J. R. Thome (Dir.)

Lausanne, EPFL, 2011. DOI : 10.5075/epfl-thesis-5226.

On-Chip Micro-Evaporation: Experimental Evaluation of Liquid Pumping and Vapor Compression Cooling Systems

J. B. MarcinichenJ. R. Thome

2011. 3rd Macro and Nano Flows Conference, Thessaloniki, Greece, August 22-24, 2011.

Efficiency Improvements of a Thermal Power Plant by Making Use of the Waste Heat of Large Datacenters using Two-Phase On-Chip Cooling

N. LamaisonJ. B. MarcinichenJ. R. Thome

2011. World Engineer’s Convention, Geneva, Switzerland, September 4-9, 2011.

A Review of On-Chip Micro-Evaporation: Experimental Evaluation of Liquid Pumping and Vapor Compression Driven Cooling Systems and Control

J. B. MarcinichenJ. A. OlivierV. d. OliveiraJ. R. Thome

Applied Energy. 2011. DOI : 10.1016/j.apenergy.2011.10.030.

Two-phase flow of refrigerants in 85μm-wide multi-microchannels: Part I – Pressure drop

E. Costa-PatryJ. OlivierB. A. NichitaB. MichelJ. R. Thome

International Journal of Heat and Fluid Flow. 2011. DOI : 10.1016/j.ijheatfluidflow.2011.01.005.

Algebraic turbulence modeling in adiabatic and evaporating annular two-phase flow

A. CioncoliniJ. R. Thome

International Journal Of Heat And Fluid Flow. 2011. DOI : 10.1016/j.ijheatfluidflow.2011.05.006.

Macro-to-microchannel transition in two-phase flow: Part 2-Flow boiling heat transfer and critical heat flux

C. L. OngJ. R. Thome

Experimental Thermal And Fluid Science. 2011. DOI : 10.1016/j.expthermflusci.2010.12.003.

Reasons to Use Two-phase Refrigerant Cooling

J. B. MarcinichenJ. OlivierJ. R. Thome

ElectronicsCooling. 2011.

Flow Boiling of R134a in a Multi-Microchannel Heat Sink with Hotspot Heaters for Energy-Efficient Microelectronic CPU Cooling Applications

Y. MadhourJ. OlivierE. Costa-PatryS. ParedesB. Michel  et al.

Ieee Transactions On Components Packaging And Manufacturing Technology. 2011. DOI : 10.1109/TCPMT.2011.2123895.

Cooling High Heat Flux Micro-Electronic Systems using Refrigerants in High Aspect Ratio Multi-Microchannel Evaporators

E. Costa-Patry / J. R. Thome (Dir.)

Lausanne, EPFL, 2011. DOI : 10.5075/epfl-thesis-5225.

Green Cooling of High Performance Micro Processors: Parametric Study between Flow Boiling and Water Cooling

J. A. OlivierJ. B. MarcinichenA. BruchJ. R. Thome

Journal of Thermal Science and Engineering Applications. 2011. DOI : 10.1115/1.4004435.

Two-phase flow of refrigerants in 85μm-wide multi-microchannels: Part II – Heat transfer with 35 local heaters

E. Costa-PatryJ. OlivierB. MichelJ. R. Thome

International Journal of Heat and Fluid Flow. 2011. DOI : 10.1016/j.ijheatfluidflow.2011.01.006.

Macro-to-microchannel transition in two-phase flow: Part 1 – Two-phase flow patterns and film thickness measurements

C. L. OngJ. R. Thome

Experimental Thermal and Fluid Science. 2011. DOI : 10.1016/j.expthermflusci.2010.08.004.

Experimental and Visual Study on Flow Patterns and Pressure Drops in U-Tubes

R. J. Da Silva Lima / J. R. Thome (Dir.)

Lausanne, EPFL, 2011. DOI : 10.5075/epfl-thesis-5038.

Experimental Adiabatic Two-Phase Pressure Drops of R134a, R236fa and R245fa in Small Horizontal Circular Channels

C. L. OngJ. R. Thome

2011. ASME/JSME Thermal Engineering Joint Conference, Honolulu, Hawaii, March 13-17, 2011. DOI : 10.1115/AJTEC2011-44010.

TWO-PHASE FLOW AND BOILING OF AMMONIA IN HORIZONTAL SMOOTH TUBES

J. R. ThomeR. J. da Silva Lima

2011. Ammonia Refrigeration Technology - INTERNATIONAL INSTITUTE OF REFRIGERATION, Ohrid, Republic of Macedonia, April 14-16, 2011.

Towards Thermally-Aware Design of 3D MPSoCs with Inter-Tier Cooling

M. SabryA. SridharD. Atienza AlonsoY. TemizY. Leblebici  et al.

2011. Design, Automation and Test in Europe (DATE), Grenoble, France, March 14 - 18, 2011. p. 1466 - 1471. DOI : 10.1109/DATE.2011.5763237.

Experimental study on condensation heat transfer in vertical minichannels for new refrigerant R1234ze(E) versus R134a and R236fa

J. E. ParkF. Vakili FarahaniL. ConsoliniJ. R. Thome

Experimental Thermal And Fluid Science. 2011. DOI : 10.1016/j.expthermflusci.2010.11.006.

Characterization and prediction of two-phase flow regimes in miniature tubes

E. RahimR. RevellinJ. ThomeA. Bar-Cohen

International Journal of Multiphase Flow. 2011. DOI : 10.1016/j.ijmultiphaseflow.2010.09.002.

Critical heat flux in multi-microchannel copper elements with low pressure refrigerants

J. E. ParkJ. R. Thome

International Journal of Heat and Mass Transfer. 2010. DOI : 10.1016/j.ijheatmasstransfer.2009.09.047.

Numerical Modeling of Annular Laminar Film Condensation in Circular and Non-Circular Micro-Channels under Normal and Micro-Gravity

S. Nebuloni / J. R. Thome (Dir.)

Lausanne, EPFL, 2010. DOI : 10.5075/epfl-thesis-4655.

Critical Heat Flux of R134a and R245fa in 2.2 mm Circular Tube

C. Bigonha TibiriçaS. SzczukiewiczG. RibatskiJ. R. Thome

2010. ENCIT 2010: 13th Brazilian Congress of Thermal Sciences and Engineering, Uberlandia, MG, Brazil, December 05-10, 2010.

Prediction Of Critical Heat Flux In Microchannels

J. R. ThomeL. Consolini

2010. Conference of the NATO-Advanced-Study-Institute on Microfluidics Based Microsystems - Fundamentals and Applications, Cesme Izmir, TURKEY, Aug 23-Sep 04, 2009. p. 107 - 120. DOI : 10.1007/978-90-481-9029-4_6.

Cooling of microprocessors with micro-evaporation: A novel two-phase cooling cycle

J. B. MarcinichenJ. R. ThomeB. Michel

International Journal Of Refrigeration-Revue Internationale Du Froid. 2010. DOI : 10.1016/j.ijrefrig.2010.06.008.

Film Condensation of R-134a and R-236fa, Part 1: Experimental Results and Predictive Correlation for Single-Row Condensation on Enhanced Tubes

M. ChristiansM. HabertJ. Thome

Heat Transfer Engineering. 2010. DOI : 10.1080/01457630903547461.

Void Fraction Prediction in Annular Two-Phase Flow Using an Algebraic Turbulence Model

J. R. ThomeA. Cioncolini

Microgravity Science And Technology. 2010. DOI : 10.1007/s12217-010-9196-7.

Macro-to-Microchannel Transition in Two-Phase Flow and Evaporation

C. L. Ong / J. R. Thome (Dir.)

Lausanne, EPFL, 2010. DOI : 10.5075/epfl-thesis-4674.

Conjugate Heat Transfer In Annular Laminar Film Condensation In Microchannels: Comparison of Numerical Model To Experimental Results

S. NebuloniJ. R. ThomeD. Del Col

2010. International Heat Transfer Conference, IHTC14, Washington, DC, USA, August 8-13, 2010. p. 245 - 252. DOI : 10.1115/IHTC14-23003.

Prediction of the entrained liquid fraction in vertical annular gas–liquid two-phase flow

A. CioncoliniJ. R. Thome

International Journal of Multiphase Flow. 2010. DOI : 10.1016/j.ijmultiphaseflow.2009.11.011.

A VOF method coupled with a dynamic contact angle model for simulation of two-phase flows with partial wetting

B. A. NichitaI. ZunJ. R. Thome

2010. 7th International Conference on Multiphase Flow, ICMF 2010, Tampa, FL, May 30 – June 4, 2010, Tampa, Florida, USA, May 30-June 4, 2010.

Microscale Adiabatic Gas-Liquid Annular Two-Phase Flow: Analytical Model Description, Void Fraction, and Pressure Gradient Predictions

A. CioncoliniJ. ThomeL. ConsoliniC. L. Ong

Heat Transfer Engineering. 2010. DOI : 10.1080/01457630903312072.

Numerical modeling of laminar annular film condensation for different channel shapes

S. NebuloniJ. R. Thome

International Journal of Heat and Mass Transfer. 2010. DOI : 10.1016/j.ijheatmasstransfer.2010.02.054.

Mechanisms of Boiling in Micro-Channels: Critical Assessment

J. ThomeL. Consolini

Heat Transfer Engineering. 2010. DOI : 10.1080/01457630903312049.

Numerical Modeling of the Conjugate Heat Transfer Problem for Annular Laminar Film Condensation in Microchannels

S. NebuloniJ. R. Thome

2010. ASME Micro/Nanoscale Heat and Mass Transfer International Conference, Shanghai, PEOPLES R CHINA, Dec 18-21, 2009. p. 129 - 137. DOI : 10.1115/MNHMT2009-18183.

A Level Set Method Coupled With a Volume of Fluid Method for Modeling of Gas-Liquid Interface in Bubbly Flow

B. A. NichitaI. ZunJ. R. Thome

Journal of Fluids Engineering. 2010. DOI : 10.1115/1.4002166.

A novel time strip flow visualisation technique for investigation of intermittent dewetting and dryout in elongated bubble flow in a microchannel evaporator

N. BorhaniB. AgostiniJ. R. Thome

International Journal of Heat and Mass Transfer. 2010. DOI : 10.1016/j.ijheatmasstransfer.2010.06.011.

On-chip Cooling using Micro-evaporators

J. B. MarcinichenJ. OlivierJ. R. Thome

Flash informatique. 2010.

Two-Phase Pressure Drops in Adiabatic Horizontal Circular Smooth U-Bends and Contiguous Straight Pipes (RP-1444)

R. J. da Silva LimaJ. R. Thome

HVAC & R Research. 2010. DOI : 10.1080/10789669.2010.10390910.

New Novel Green Computer Two-Phase Cooling Cycle: A Model for Its Steady-State Simulation

J. B. MarcinichenJ. R. Thome

2010. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems - ECOS2010, Lausanne, June 14-17, 2010.

A heat transfer model for evaporation of coalescing bubbles in micro-channel flow

L. ConsoliniJ. R. Thome

International Journal of Heat and Fluid Flow. 2010. DOI : 10.1016/j.ijheatfluidflow.2009.10.005.

Refrigerated Cooling of Microprocessors with Micro-Evaporation / New Novel Two-Phase Cooling Cycles: A Green Steady-State Simulation Code

J. B. MarcinichenJ. R. Thome

2010. 13th Brazilian Congress of Thermal Sciences and Engineering, Uberlandia, Brazil, 2010.

Mechanisms Of Boiling In Microchannels: Critical Assessment

J. R. ThomeL. Consolini

2010. Conference of the NATO-Advanced-Study-Institute on Microfluidics Based Microsystems - Fundamentals and Applications, Cesme Izmir, TURKEY, Aug 23-Sep 04, 2009. p. 83 - 105. DOI : 10.1007/978-90-481-9029-4_5.

A level set method and a heat transfer model implemented into FLUENT for modeling of microscale two phase flows

B. A. NichitaJ. R. Thome

2010. AVT-178 Specialists'Meeting on System Level Thermal Management for Enhanced Platform Efficiency, Bucharest, Romania, October 4-7, 2010.

Experimental investigation of diabatic flow in microchannels using infra-red thermography

S. SzczukiewiczN. BorhaniJ. R. Thome

2010. XIV Sympozjum Wymiany Ciepla i Masy, Miedzyzdroje, Poland, September 6-9, 2010.

Two-phase Cooling of Datacenters: Reduction in Energy Costs and Improved Efficiencies

J. OlivierJ. B. MarcinichenJ. R. Thome

2010. 13th Brazilian Congress of Thermal Sciences and Engineering, Uberlandia, Brazil, 2010.

An Improved CFD Tool to Simulate Adiabatic and Diabatic Two-Phase Flows

B. A. Nichita / J. R. Thome (Dir.)

Lausanne, EPFL, 2010. DOI : 10.5075/epfl-thesis-4776.

The New 3rd Edition of the ALPEMA Plate-Fin Heat Exchanger Standards

J. Thome

Heat Transfer Engineering. 2010. DOI : 10.1080/01457630903263176.

Recent Developments in Flow Boiling and Two-Phase Flow in Small Channels and Microchannels

J. ThomeA. Cioncolini

Heat Transfer Engineering. 2010. DOI : 10.1080/01457630903311652.

Falling-Film Evaporation On Tube Bundle With Plain And Enhanced Tubes-Part I: Experimental Results

M. HabertJ. R. Thome

Experimental Heat Transfer. 2010. DOI : 10.1080/08916152.2010.502045.

Falling-Film Evaporation On Tube Bundle With Plain And Enhanced Tubes-Part Ii: New Prediction Methods

M. HabertJ. R. Thome

Experimental Heat Transfer. 2010. DOI : 10.1080/08916152.2010.502046.

Film Condensation of R-134a and R-236fa, Part 2: Experimental Results and Predictive Correlation for Bundle Condensation on Enhanced Tubes

M. ChristiansM. HabertJ. Thome

Heat Transfer Engineering. 2010. DOI : 10.1080/01457630903547487.

Saturated critical heat flux in a multi-microchannel heat sink fed by a split flow system

A. W. MauroJ. R. ThomeD. TotoG. P. Vanoli

Experimental Thermal and Fluid Science. 2010. DOI : 10.1016/j.expthermflusci.2009.09.005.

Heat Transfer and Visualization of Falling Film Evaporation on a Tube Bundle

M. Christians / J. R. Thome (Dir.)

Lausanne, EPFL, 2010. DOI : 10.5075/epfl-thesis-4840.

Transition of Bubbly Flow in Vertical Tubes: New Criteria Through CFD Simulation

A. K. DasP. K. DasJ. R. Thome

Journal Of Fluids Engineering-Transactions Of The Asme. 2009. DOI : 10.1115/1.3203205.

Flow boiling in horizontal smooth tubes: New heat transfer results for R-134a at three saturation temperatures

R. J. da Silva LimaJ. Moreno QuibénJ. R. Thome

2009. 10th UK Heat Transfer Conference, Edinburgh, Scotland, United Kingdom, September 10-11, 2007. p. 1289 - 1298. DOI : 10.1016/j.applthermaleng.2008.06.021.

Status of prediction methods for critical heat fluxes in mini and microchannels

R. RevellinK. MishimaJ. R. Thome

International Journal of Heat and Fluid Flow. 2009. DOI : 10.1016/j.ijheatfluidflow.2009.04.006.

Flow boiling in horizontal flattened tubes: Part II – Flow boiling heat transfer results and model

J. Moreno QuibénL. ChengR. J. da Silva LimaJ. R. Thome

International Journal of Heat and Mass Transfer. 2009. DOI : 10.1016/j.ijheatmasstransfer.2008.12.033.

Critical Heat Flux During Flow Boiling in Microchannels: A Parametric Study

R. RevellinJ. Thome

Heat Transfer Engineering. 2009. DOI : 10.1080/01457630802594879.

Ammonia two-phase flow in a horizontal smooth tube: Flow pattern observations, diabatic and adiabatic frictional pressure drops and assessment of prediction methods

R. J. da Silva LimaJ. M. QuibénC. KuhnT. BoymanJ. R. Thome

International Journal of Heat and Mass Transfer. 2009. DOI : 10.1016/j.ijheatmasstransfer.2008.12.001.

Algebraic turbulence modeling in adiabatic gas–liquid annular two-phase flow

A. CioncoliniJ. R. ThomeC. Lombardi

International Journal of Multiphase Flow. 2009. DOI : 10.1016/j.ijmultiphaseflow.2009.02.002.

Unified macro-to-microscale method to predict two-phase frictional pressure drops of annular flows

A. CioncoliniJ. R. ThomeC. Lombardi

International Journal of Multiphase Flow. 2009. DOI : 10.1016/j.ijmultiphaseflow.2009.07.005.

Micro-channel flow boiling heat transfer of R-134a, R-236fa, and R-245fa

L. ConsoliniJ. R. Thome

Microfluidics and Nanofluidics. 2009. DOI : 10.1007/s10404-008-0348-7.

Flow boiling characteristics and flow pattern visualization of refrigerant/lubricant oil mixtures

B. FilhoP. EnioL. ChengJ. R. Thome

International Journal of Refrigeration. 2009. DOI : 10.1016/j.ijrefrig.2008.06.013.

Flow boiling heat transfer of R134a, R236fa and R245fa in a horizontal 1.030mm circular channel

C. L. OngJ. R. Thome

Experimental Thermal and Fluid Science. 2009. DOI : 10.1016/j.expthermflusci.2009.01.002.

Effect of Inlet Orifice on Saturated CHF and Flow Visualization in Multi-microchannel Heat Sinks

J. E. ParkJ. R. ThomeB. Michel

2009. 25th Annual IEEE Semiconductor Thermal Measurement and Management Symposium, San Jose, CA, Mar 15-19, 2009. p. 1 - 8. DOI : 10.1109/STHERM.2009.4810735.

Falling film evaporation on a tube bundle with plain and enhanced tubes

M. Habert / J. R. Thome (Dir.)

Lausanne, EPFL, 2009. DOI : 10.5075/epfl-thesis-4341.

Flow boiling in horizontal flattened tubes: Part I – Two-phase frictional pressure drop results and model

J. Moreno QuibénL. ChengR. J. da Silva LimaJ. R. Thome

International Journal of Heat and Mass Transfer. 2009. DOI : 10.1016/j.ijheatmasstransfer.2008.12.032.

Cooling of microprocessors using flow boiling of CO2 in a micro-evaporator: Preliminary analysis and performance comparison

L. ChengJ. R. Thome

Applied Thermal Engineering. 2009. DOI : 10.1016/j.applthermaleng.2008.12.019.

Constructal tree-shaped microchannel networks for maximizing the saturated critical heat flux

R. RevellinJ. ThomeA. BejanJ. Bonjour

International Journal of Thermal Sciences. 2009. DOI : 10.1016/j.ijthermalsci.2008.06.009.

Transition of Bubbly Flow in Vertical Tubes: Effect of Bubble Size and Tube Diameter

A. K. DasP. K. DasJ. R. Thome

Journal of Fluids Engineering. 2009. DOI : 10.1115/1.3203206.

Conditions of liquid film dryout during saturated flow boiling in microchannels

R. RevellinP. HaberschillJ. BonjourJ. Thome

Chemical Engineering Science. 2008. DOI : 10.1016/j.ces.2008.08.030.

NUCLEATE BOILING ON MICRO-STRUCTURED SURFACES

M. E. PoniewskiJ. R. Thome

150 Venture Drive, College Station, TX 77845, USA: Heat Transfer Research, Inc. (HTRI), 2008.

High Heat Flux Flow Boiling in Silicon Multi-Microchannels: Part I – Heat Transfer Characteristics of R-236fa

B. AgostiniJ. R. ThomeM. FabbriD. CalmiU. kloter  et al.

International Journal of Heat and Mass Transfer. 2008. DOI : 10.1016/j.ijheatmasstransfer.2008.03.006.

Two-Phase Flow Patterns and Flow-Pattern Maps: Fundamentals and Applications

L. ChengG. RibatskiJ. R. Thome

Applied Mechanics Reviews. 2008. DOI : 10.1115/1.2955990.

High Heat Flux Two-Phase Cooling in Silicon Multi-Microchannels

B. AgostiniJ. R. ThomeM. FabbriB. Michel

IEEE Transactions on Components and Packaging Technologies. 2008. DOI : 10.1109/TCAPT.2008.921997.

New Prediction Methods for CO2 Evaporation Inside Tubes: Part II - An Updated General Flow Boiling Heat Transfer Model Based on Flow Patterns

L. ChengG. RibatskiJ. Thome

International Journal of Heat and Mass Transfer. 2008. DOI : 10.1016/j.ijheatmasstransfer.2007.04.001.

Boiling on a tube bundle : heat transfer, pressure drop and flow patterns

F. Agostini / J. R. Thome (Dir.)

Lausanne, EPFL, 2008. DOI : 10.5075/epfl-thesis-4113.

Periodic bubble emission and appearance of an ordered bubble sequence (train) during condensation in a single microchannel

W. ZhangJ. XuJ. Thome

International Journal of Heat and Mass Transfer. 2008. DOI : 10.1016/j.ijheatmasstransfer.2007.11.025.

Elongated Bubbles in Microchannels Part II: Experimental Study and Modeling of Bubble Collisions

R. RevellinB. AgostiniJ. R. Thome

International Journal of Multiphase Flow. 2008. DOI : 10.1016/j.ijmultiphaseflow.2007.07.006.

New Prediction Methods for CO2 Evaporation inside Tubes: Part I - A Two-Phase Flow Pattern Map and a Flow Pattern Based Phenomenological Model for Two-Phase Flow Frictional Pressure Drops

L. ChengG. RibatskiJ. Moreno QuibenJ. Thome

International Journal of Heat and Mass Transfer. 2008. DOI : 10.1016/j.ijheatmasstransfer.2007.04.002.

Experimental investigation of velocity and length of elongated bubbles for flow of R-134a in a 0.5mm microchannel

R. RevellinB. AgostiniT. UrsenbacherJ. Thome

Experimental Thermal and Fluid Science. 2008. DOI : 10.1016/j.expthermflusci.2007.10.006.

Effect of Local Hot Spots on the Maximum Heat Transfer during Flow Boiling in a Microchannel

R. RevellinJ. Moreno QuibenJ. BonjourJ. R. Thome

IEEE Transactions on Components and Packaging Technologies. 2008. DOI : 10.1109/TCAPT.2008.916841.

Analysis of supercritical CO2 cooling in macro- and micro-channels

L. ChengG. RibatskiJ. Thome

International Journal of Refrigeration. 2008. DOI : 10.1016/j.ijrefrig.2008.01.010.

Flow boiling of ammonia and hydrocarbons: A state-of-the-art review

J. ThomeL. ChengG. RibatskiL. Vales

International Journal of Refrigeration. 2008. DOI : 10.1016/j.ijrefrig.2007.11.010.

Critical heat flux in multi-microchannel copper elements with low pressure refrigerants

J. E. Park / J. R. Thome (Dir.)

Lausanne, EPFL, 2008. DOI : 10.5075/epfl-thesis-4223.

A methodology to select the experimental plant instrumentation based on an a priori analysis of measurement errors and instrumentation cost

R. MastrulloA. RosatoG. P. VanoliJ. R. Thome

International Communications In Heat And Mass Transfer. 2008. DOI : 10.1016/j.icheatmasstransfer.2008.02.001.

Interaction between a surface dielectric barrier discharge and transonic airflows

S. Pavón / P. OttJ. R. Thome (Dir.)

Lausanne, EPFL, 2008. DOI : 10.5075/epfl-thesis-4201.

INFLUENCE OF THE SATURATION TEMPERATURE ON THE HEAT TRANSFER COEFFICIENT FOR FLOW BOILING INSIDE HORIZONTAL SMOOTH TUBES

R. J. da Silva LimaE. P. Bandarra FilhoJ. R. Thome

2008. EBECEM 2008 - 1º Encontro Brasileiro sobre Ebulição, Condensação e Escoamento Multifásico Líquido-Gás, Florianópolis, Brasil, 28-29 April 2008.

High Heat Flux Flow Boiling in Silicon Multi-Microchannels: Part II – Heat Transfer Characteristics of R-245fa

B. AgostiniJ. R. ThomeM. FabbriD. CalmiU. Kloter  et al.

International Journal of Heat and Mass Transfer. 2008. DOI : 10.1016/j.ijheatmasstransfer.2008.03.007.

Nanofluid Two-Phase Flow and Thermal Physics: A New Research Frontier of Nanotechnology and Its Challenges

L. ChengB. FilhoP. EnioJ. R. Thome

Journal of Nanoscience and Nanotechnology. 2008. DOI : 10.1166/jnn.2008.413.

A Theoretical Model for Prediction of the Critical Heat Flux CHF in Heated Microchannels

R. RevellinJ. Thome

International Journal of Heat and Mass Transfer. 2008. DOI : 10.1016/j.ijheatmasstransfer.2007.03.002.

Convective boiling heat transfer in a single micro-channel

L. Consolini / J. R. Thome (Dir.)

Lausanne, EPFL, 2008. DOI : 10.5075/epfl-thesis-4024.

High Heat Flux Flow Boiling in Silicon Multi-Microchannels: Part III – Saturated Critical Heat Flux of R236fa and Two-Phase Pressure Drop

B. AgostiniR. RevellinJ. R. ThomeM. FabbriB. Michel  et al.

International Journal of Heat and Mass Transfer. 2008. DOI : 10.1016/j.ijheatmasstransfer.2008.03.005.

Elongated Bubbles in Microchannels. Part I: Experimental Study and Modeling of Elongated Bubble Velocity

B. AgostiniR. RevellinJ. R. Thome

International Journal of Multiphase Flow. 2008. DOI : 10.1016/j.ijmultiphaseflow.2007.07.007.

Flow pattern based two-phase frictional pressure drop model for horizontal tubes, Part II: New phenomenological model

J. Moreno QuibenJ. R. Thome

International Journal of Heat and Fluid Flow. 2007. DOI : 10.1016/j.ijheatfluidflow.2007.01.004.

On the prediction of heat transfer in micro-scale flow boiling

G. RibatskiW. ZhangL. ConsoliniJ. XuJ. R. Thome

2007. ECI International Conference on Boiling Heat Transfer, Spoleto, May 8-12. p. 842 - 851. DOI : 10.1080/01457630701378267.

Microscale Editorial

R. RevellinJ. Thome

2007

Prediction of Flow Boiling Heat Transfer of Carbon Dioxide inside Small Diameter Tubes

J. R. Thome

2007. HEFAT2007, Sun City South Africa, July 1-4.

Adiabatic Two-Phase Frictional Pressure Drops in Microchannels

R. RevellinJ. Thome

Experimental Thermal and Fluid Science. 2007. DOI : 10.1016/j.expthermflusci.2006.07.001.

Film Condensation under Normal and Micro-Gravity: Effect of Channel Shape

S. NebuloniJ. R. Thome

2007. Second International Topical Team Workshop on TWO-PHASE SYSTEMS FOR GROUND AND SPACE APPLICATIONS, Kyoto, Japan, October 26-28, 2007.

Falling Films on Arrays of Horizontal Tubes with R-134a, Part I: Boiling Heat Transfer Results for Four Types of Tubes

J.-F. RoquesJ. R. Thome

Heat Transfer Engineering. 2007. DOI : 10.1080/01457630601163629.

Comparison of experimental pressure drop data for two-phase flows to predicts methods using a general model

A. MauroJ. Moreno QuibenR. MastrulloJ. Thome

International Journal of Refrigeration. 2007. DOI : 10.1016/j.ijrefrig.2007.04.008.

Flow pattern based two-phase frictional pressure drop model for horizontal tubes. Part I: Diabatic and adiabatic experimental study

J. Moreno QuibenJ. R. Thome

International Journal of Heat and Fluid Flow. 2007. DOI : 10.1016/j.ijheatfluidflow.2007.01.003.

Cooling of Microprocessors using Flow Boiling of Refrigerants in Micro-Evaporators

J. R. ThomeR. RevellinB. AgostiniJ. Park

2007. International Symposium on Phase Change, UK Heat Transfer 2007, Edinburgh Scotland, September 12.

Optical Measurement to Characterize Two-Phase Fluid Flow in Microchannels

R. RevellinJ. Thome

Multiphase Science and Technology. 2007. DOI : 10.1615/MultScienTechn.v19.i1.30.

A New Type of Diabatic Flow Pattern Map for Boiling Heat Transfer in Microchannels

R. RevellinJ. Thome

Journal of Micromechanics and Microengineering. 2007. DOI : 10.1088/0960-1317/17/4/016.

Experimental Study on the Onset of Local Dryout in an Evaporating Falling Film on Horizontal Plain Tubes

G. RibatskiJ. Thome

Experimental Thermal and Fluid Science. 2007. DOI : 10.1016/j.expthermflusci.2006.05.010.

Heat Transfer in Confined Forced-Flow Boiling

L. ConsoliniG. RibatskiJ. R. ThomeW. ZhangJ. Xu

Heat Transfer Engineering. 2007. DOI : 10.1080/01457630701378226.

State of the Art of High Heat Flux Cooling Technologies

B. AgostiniM. FabbriJ. E. ParkL. WojtanJ. R. Thome  et al.

Heat Transfer Engineering. 2007. DOI : 10.1080/01457630601117799.

Falling Films on Horizontal Tubes with R-134a, Part II: Flow Visualization, Onset of Dryout and Heat Transfer Predictions

J. RoquesJ. Thome

Heat Transfer Engineering. 2007. DOI : 10.1080/01457630601163736.

Experimental Investigation of R-134a and R-245fa Two-Phase Flows in Microchannels for Different Flow Conditions

R. RevellinJ. R. Thome

2007. The International Conference on Heat Transfer and Fluid Flow in Microscale (HTFFM-05), Castelvecchio Pascol, Sept. 25-30, 2005. p. 63 - 71. DOI : 10.1016/j.ijheatfluidflow.2006.05.009.

Recent Advances in Thermal Modeling of Micro-Evaporators for Cooling of Microprocessors

J. R. Thome

2007. ASME International Mechanical Engineering Congress and Exhibition (IMECE), Seatle, November 10-16. p. 1583 - 1592. DOI : 10.1115/IMECE2007-42900.

Film Condensation under Normal and Micro-Gravity: Effect of Channel Shape

S. NebuloniJ. R. Thome

Microgravity Science and Technology. 2007. DOI : 10.1007/BF02915772.

Two-Phase Flow and Heat Transfer across Horizontal Tube Bundles – A Review

G. RibatskiJ. R. Thome

Heat Transfer Engineering. 2007. DOI : 10.1080/01457630701193898.

Heat Transfer, Pressure Drops, and Flow Pattern Recognition during Condensation inside Smooth, Helical Micro-Fin and HerringBone Tubes

J. OliverL. LiebenbergJ. ThomeJ. Meyer

International Journal of Refrigeration. 2007. DOI : 10.1016/j.ijrefrig.2006.11.003.

New Flow Pattern-Based Two-Phase Pressure Drop Model

J. Thome

2006. Italian National Heat Transfer Conference UIT, Naples, Naples, Italy, June 21-23, 2006.

Film Condensation of R-134a on Tube Arrays with Plain and Enhanced Surfaces: Part I, Experimental Heat Transfer Coefficients

D. GstöhlJ. Thome

Journal of Heat Transfer. 2006. DOI : 10.1115/1.2130400.

Fundamentals of Boiling in Microchannels

J. Thome

13th International Heat Transfer Conference, Sydney, Australia, Aug. 13-18, 2006.

New Flow Pattern-Based Pressure Drop Model

J. R. Thome

2006. Italian National Heat Transfer Conference UIT, Naples, June 21-23.

Boiling in Microchannels

J. Thome

2006. 44th European Two-Phase Flow Group Meeting, EPFL-Lausanne, June 7-9, 2006.

Heat Transfer in Confined Forced-Flow Boiling

L. ConsoliniG. RibatskiW. ZhangJ. XuJ. Thome

2006. ECI International Conference on Boiling Heat Transfer, Spoleto, Italy, May 8-12.

Nucleate Boiling Heat Transfer of R134A on Enhanced Tubes

G. RibatskiJ. Thome

Applied Thermal Engineering. 2006. DOI : 10.1016/j.applthermaleng.2005.09.021.

Investigation of Critical Heat Flux in Single, Uniformly Heated Microchannels

L. WojtanR. RevellinJ. Thome

Experimental Thermal and Fluid Science. 2006. DOI : 10.1016/j.expthermflusci.2006.03.006.

New Flow Boiling Heat Transfer Model and Flow Pattern Map for Carbon Dioxide Evaporating inside Tubes

L. ChengG. RibatskiL. WojtanJ. Thome

International Journal of Heat and Mass Transfer. 2006. DOI : 10.1016/j.ijheatmasstransfer.2006.04.003.

Boiling in Microchannels

J. R. Thome

2006. 44th European Two-Phase Flow Meeting, Lausanne.

Film Condensation of R-134a on Tube Arrays with Plain and Enhanced Surfaces: Part II, Empirical Prediction of Inundation Effects

D. GstöhlJ. Thome

Journal of Heat Transfer. 2006. DOI : 10.1115/1.2130401.

An Analysis of Experimental Data and Prediction Methods for Flow Boiling Heat Transfer and Two-Phase Frictional Pressure Drop in Micro-Scale Channels

G. RibatskiL. WojtanJ. Thome

Experimental Thermal and Fluid Science. 2006. DOI : 10.1016/j.expthermflusci.2006.01.006.

Prediction of Local Bundle Boiling Heat Transfer Coefficients: Pure Refrigerant Boiling on Plain, Low Fin and Turbo-BII HP Tube Bundles

J. R. ThomeD. M. Robinson

Heat Transfer Engineering. 2006. DOI : 10.1080/01457630600904635.

Boiling in Microchannels: A New Diabatic Flow Pattern Map

R. RevellinJ. Thome

2006. 44th European Two-Phase Flow Group Meeting, Lausanne, Lausanne, EPFL, June 7-9, 2006.

Predictions of Flow Patterns and Flow Boiling Heat Transfer of Carbon Dioxide inside Horizontal Tubes

J. R. Thome

2006. ENCIT, Curitiba Parana Brazil, December 5-8.

Enhanced Boiling Heat Transfer

J. ThomeG. Ribatski

HEDU HEAT EXCHANGER DESIGN UPDATE; Begell House, in preparation., 2006.

WOLVERINE ENGINEERING DATABOOK III

J. R. Thome

(web book updated yearly), 2006.

Characterization of Two-Phase Flows in Microchannels: Optical Measurement Technique and Flow Parameter Results for R-134a in a 0.5 mm Channel

R. RevellinV. DupontT. UrsenbacherJ. ThomeI. Zun

International Journal of Multiphase Flow. 2006. DOI : 10.1016/j.ijmultiphaseflow.2006.02.016.

The New Frontier in Heat Transfer: Microscale and Nanoscale Technologies

J. Thome

Heat Transfer Engineering. 2006. DOI : 10.1080/01457630600845283.

State-of-the-Art Overview of Boiling and Two-Phase Flows in Microchannels

J. Thome

Heat Transfer Engineering. 2006. DOI : 10.1080/01457630600845481.

An Experimental Study of Elongated Bubble Velocities in Horizontal Microchannels

B. AgostiniR. RevellinJ. Thome

2006. 44th European Two-Phase Flow Group Meeting, Lausanne EPFL, June 7-9, 2006.

New Diabatic Flow Pattern Map for Evaporating Flows in Microchannels

R. RevellinJ. Thome

2006. 13th International Heat Transfer Conference, Sydney, Australia, August 14-18..

Heat Transfer in Small Diameter Channels

L. ConsoliniJ. Thome

2006. 44th European Two-Phase Flow Group Meeting, Lausanne, Lausanne EPFL, June 7-9..

Visualization of R-134a Flowing on Tube Arrays with Plain and Enhanced Surfaces under Adiabatic and Condensing Conditions

D. GstöhlJ. Thome

Heat Transfer Engineering. 2006. DOI : 10.1080/01457630600908537.

Experimental Study of Falling Film Flow Pattern Map and Intercolumn Distance with R236fa

M. HabertG. RibatskiJ. Thome

2006. ECI International Conference on Boiling Heat Transfer, Spoleto, Italy, May 8-12.

Overview of Fundamentals of Boiling and Two-Phase Flows in Microchannels

J. Thome

Heat Transfer Engineering. 2006.

Void Fraction and Two-Phase Pressure Drops for Evaporating Flow over Horizontal Tube Bundles

L. ConsoliniD. RobinsonJ. Thome

Heat Transfer Engineering. 2006. DOI : 10.1080/01457630500453832.

Heat transfer assembly

J. ThomeV. Dupont

DE602005003587 ; EP1779052 ; US7261144 ; EP1779052 ; WO2005124257 ; US2005279491 ; EP1607707 . 2005.

Condensation in Plain Horizontal Tubes: Recent Advances in Modelling of Heat Transfer to Pure Fluids and Mixtures

J. Thome

Journal of the Brasilian Society of Mechanical Sciencesand Engineering. 2005.

Flow Boiling in Micro-Scale Channels - An Analysis of Heat Transfer Results and Prediction Methods

G. RibatskiL. WojtanJ. Thome

2005. 3rd IASME/WSEAS International Conference on Heat Transfer, Thermal Engineering and Environment, Corfu, Greece, Aug. 20-22, 2005.

Experimental two-phase fluid flow in microchannels

R. Revellin / J. R. Thome (Dir.)

Lausanne, EPFL, 2005. DOI : 10.5075/epfl-thesis-3437.

Flow Pattern Based Pressure Drop Correlations for Refrigerant Condensation in Smooth and Enhanced Tubes

L. LiebenbergJ. OlivierJ. ThomeJ. Meyer

IIR Conference on Thermophysical Properties and Transfer Processes of Refrigerants, Vicenza, Italy, Aug. 29 - Sept. 2, 2005.

Flow Boiling in Micro-Scale Channels - An Analysis of Heat Transfer Results and Prediction Methods

G. RibatskiL. WojtanJ. Thome

IASME Trans.. 2005.

Flow Boiling in Microchannels

J. Thome

EUROMECH COLLOQUIUM 472 on Microfluidics and Transfer, Grenoble, France, Sept. 6-8.

State-of-the-Art of Two-Phase Flow and Flow Boiling Heat Transfer and Pressure Drop of CO2 in Macro- and Micro-Channels

J. ThomeG. Ribatski

IIR Conference on Thermophysical Properties and Transfer Processes of Refrigerants, Vicenza, Italy, Aug. 31-Sept. 2, 2005.

Evaporation in Microchannels: Influence of the Channel Diameter on Heat Transfer

V. DupontJ. Thome

2005. Second International Conference on Microchannels and Minichannels, Rochester, NY, June 17-19,2004. p. 119 - 127. DOI : 10.1007/s10404-004-0019-2.

Comparison of Independent Heat Transfer Results and Prediction Methods for Flow Boiling in Micro-Scale Channels

G. RibatskiL. WojtanJ. Thome

2005. 18th International Congress of Mechanical Engineering, Ouro Preto, MG, Nov. 6-11, 2005.

Condensation of Zeotropic Mixtures in Horizontal Tubes: New Simplified Heat Transfer Model Based on Flow Regimes

D. Del ColA. CavalliniJ. Thome

Journal of Heat Transfer. 2005. DOI : 10.1115/1.1857951.

Investigation of Critical Heat Flux in Single, Uniformly Heated Microchannels

L. WojtanR. RevellinJ. Thome

2005. ECI International Conference on Heat Transfer and Fluid Flow in Microscale, Castelvecchio Pascoli, Sept. 25-30, 2005.

Parametric Design of a Cooler for a Micro-Processor Chip

L. ConsoliniJ. Thome

2005. IIR Conference on Thermophysical Properties and Transfer Processes of Refrigerants, Vicenza, Italy, Aug. 31-Sept. 2.

Optical Investigation of R-134a Two-Phase Flows in a Microchannel

R. RevellinJ. Thome

2005. Thermophysical Properties and Transfer Processes of Refrigerants, Vicenza, Italy, Aug. 31-Sept. 2, 2005.

Parametric Design of a Cooler for a Micro-Processor Chip

L. ConsoliniJ. Thome

IIR Conference on Thermophysical Properties and Transfer Processes of Refrigerants, Vicenza, Italy, Aug. 30 - Sept. 2, 2005.

Flow Pattern Based Pressure Drop Correlations for Refrigerant Condensation in Smooth and Enhanced Tubes

L. LiebenbergJ. OlivierJ. ThomeJ. Meyer

2005. IIR Conference on Thermophysical Properties and Transfer Processes of Refrigerants, Vicenza, Italy, Aug. 31-Sept. 2.

Two-Phase Flow and Boiling in Microchannels

J. Thome

ECI International Conference on Heat Transfer and Fluid Flow in Microscale, Castelvecchio Pascoli, Sept. 25-30, 2005.

State-of-the-Art Review of Flow Boiling and Two-Phase Flow of CO2 in Macro- and Micro-Channels

J. ThomeG. Ribatski

International Journal of Refrigeration. 2005. DOI : 10.1016/j.ijrefrig.2005.07.005.

A Visual Study of R134a Falling Film Evaporation on Enhanced and Plain Tubes

G. RibatskiJ. Thome

2005. 5th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion, Xi’an, China, 3-6 July, 2005.

Flow Visualization and Flow Pattern Identification with Power Spectral Density Distributions of Pressure Traces during Refrigerant Condensation in Smooth and Micro-Fin Tubes

L. LiebenbergJ. ThomeJ. Meyer

Journal of Heat Transfer. 2005. DOI : 10.1115/1.1857942.

Measurement of Dynamic Void Fractions in Stratified Types of Flow

L. WojtanT. UrsenbacherJ. Thome

Experimental Thermal and Fluid Science. 2005. DOI : 10.1016/j.expthermflusci.2004.05.017.

Update on Advances in Flow Pattern Based Two-Phase Heat Transfer Models

J. Thome

2005. 3rd European-Japanese Two-Phase Flow Group Meeting, Siena, Italy, 21-27, 2003. p. 341 - 349. DOI : 10.1016/j.expthermflusci.2004.05.015.

Comparison of an extented database for flow boiling heat transfer coefficients in multi-microchannels elements with the three-zone model

B. AgostiniJ. Thome

2005. ECI Engineering Conferences International Heat Transfer and Fluid Flow in Microscale, Il Ciocco, Italy, Sept. 25-30, 2005.

Investigation of Flow Boiling in Horizontal Tubes: Part I, A New Diabatic Two-Phase Flow Pattern Map

L. WojtanT. UrsenbacherJ. Thome

International Journal of Heat and Mass Transfer. 2005. DOI : 10.1016/j.ijheatmasstransfer.2004.12.012.

Experimental and analytical study of two-phase pressure drops during evaporation in horizontal tubes

J. Moreno Quibén / J. R. Thome (Dir.)

Lausanne, EPFL, 2005. DOI : 10.5075/epfl-thesis-3337.

Investigation of Flow Boiling in Horizontal Tubes: Part II, Development of a New Heat Transfer Model for Stratified-Wavy, Dryout and Mist Flow Regimes

L. WojtanT. UrsenbackerJ. Thome

International Journal of Heat and Mass Transfer. 2005. DOI : 10.1016/j.ijheatmasstransfer.2004.12.013.

New Heat Transfer Reference Book Available Free on Web

J. Thome

Heat Transfer Engineering. 2005. DOI : 10.1080/01457630590897006.

Dynamics of Two-Phase Flow across Horizontal Tube Bundle - A Review

G. RibatskiJ. Thome

EngenhariaTermica (Thermal Engineering). 2005.

Measurement of Falling Film Thickness around a Horizontal Tube using a Laser Measurement Technique

D. GstöhlJ. RoquesP. CrisinelJ. Thome

Heat Transfer Engineering. 2004. DOI : 10.1080/01457630490519899.

Interfacial Measurements in Stratified Types of Flow, Part I: New Optical Measurement Technique and Dry Angle Measurements

T. UrsenbacherL. WojtanJ. Thome

International Journal of Multiphase Flow. 2004. DOI : 10.1016/j.ijmultiphaseflow.2003.11.010.

Heat Transfer Model for Evaporation in Microchannels, Part I: Presentation of the Model

J. ThomeV. DupontA. Jacobi

International Journal of Heat and Mass Transfer. 2004. DOI : 10.1016/j.ijheatmasstransfer.2004.01.006.

Experimental and analytical investigation of void fraction and heat transfer during evaporation in horizontal tubes

L. Wojtan / J. R. Thome (Dir.)

Lausanne, EPFL, 2004. DOI : 10.5075/epfl-thesis-2978.

Boiling and Evaporation

J. ThomeM. GrollR. Mertz

Heat Transfer and Fluid Flow in Microchannels (Series in Thermal & Fluid Physics and Engineering); New York: eds. G.P. Celata and G.F. Hewitt, Begell House, 2004. p. 53 - 89.

Interfacial Measurements in Stratified Types of Flow, Part II: Measurements for R-22 and R-410A

L. WojtanT. UrsenbacherJ. Thome

International Journal of Multiphase Flow. 2004. DOI : 10.1016/j.ijmultiphaseflow.2003.11.009.

Heat Transfer Model for Evaporation in Microchannels, Part II: Comparison with the Database

V. DupontJ. ThomeA. Jacobi

International Journal of Heat and Mass Transfer. 2004. DOI : 10.1016/j.ijheatmasstransfer.2004.01.007.

Two-Phase Heat Transfer Using No-Phase Flow Models

J. Thome

Heat Transfer Engineering. 2004. DOI : 10.1080/01457630490486049.

Local Bundle Boiling Heat Transfer Coefficients on a Turbo-BII HP Enhanced Tube Bundle

D. RobinsonJ. Thome

HVAC&R Research. 2004. DOI : 10.1080/10789669.2004.10391113.

Heat transfer and flow visualization of falling film condensation on tube arrays with plain and enhanced surfaces

D. Gstöhl / J. R. Thome (Dir.)

Lausanne, EPFL, 2004. DOI : 10.5075/epfl-thesis-3015.

Local Bundle Boiling Heat Transfer Coefficients on a Low Finned Tube Bundle

D. RobinsonJ. Thome

HVAC&R Research. 2004. DOI : 10.1080/10789669.2004.10391107.

Boiling in Microchannels: A Review of Experiment and Theory

J. Thome

International Journal of Heat and Fluid Flow. 2004. DOI : 10.1016/j.ijheatfluidflow.2003.11.005.

Dynamics of Two-Phase Flow across Horizontal Tube Bundles – A Review

G. RibatskiJ. Thome

2004. 10th Brazilian Congress of Thermal Sciences and Engineering (ENCIT-2004), Rio de Janeiro, Nov. 29-Dec. 3, 2004.

Condensation in Plain Horizontal Tubes: Recent Advances in Modelling of Heat Transfer to Pure Fluids and Mixtures

J. Thome

HEFAT2004, 3rd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Cape Town, South Africa, June 21-24, 2004.

Falling film evaporation on a single tube and on a tube bundle

J.-F. Roques / J. R. Thome (Dir.)

Lausanne, EPFL, 2004. DOI : 10.5075/epfl-thesis-2987.

Condensation in Plain Horizontal Tubes: Recent Advances in Modeling of Heat Transfer to Pure Fluids and Mixtures

J. Thome

10th Brazilian Congress of Thermal and Engineering Sciences (ENSIT 2004), Nov. 29-Dec. 3, 2004, Rio de Janeiro, Brazil.

Local Bundle Boiling Heat Transfer Coefficients on a Plain Tube Bundle

D. RobinsonJ. Thome

HVAC&R Research. 2004. DOI : 10.1080/10789669.2004.10391089.

Flow Boiling Heat Transfer to Carbon Dioxide: General Prediction Method

J. ThomeJ. El Hajal

International Journal of Refrigeration. 2004. DOI : 10.1016/j.ijrefrig.2003.08.003.

Microscale Heat Transfer: Boiling and Evaporation

J. ThomeR. GrollR. Mertz

Heat Exchanger Design Update. 2003.

Application of Flattened Tubes to Small Evaporators: What are the Pros and Cons

J. Thome

2003. EEDAL’03 Conference, Torino, June 2003.

Measurement of Dynamic Void Fractions in Stratified Types of Flow

L. WojtanT. UrsenbacherJ. Thome

2003.

Thermal Phenomena in Microchannels

J. Thome

5th International Conference on Flow Boiling Heat Transfer, Jamaica, May 4-8, 2002.

Falling Film Evaporation Heat Transfer

J. Thome

International Refrigeration Congress, Milano, Italy, February 2003.

Update on the Kattan-Thome-Favrat Flow Boiling Model and Flow Pattern Map

J. Thome

2003. 5th International Boiling Conference, Montego Bay, Jamaica, May 4-8, 2003.

Two-Phase Pressure Drops in Horizontal Tubes: New Results for R-410A and R-134a Compared to R-22

J. Moreno QuibenJ. Thome

2003. 21st IIR International Congress of Refrigeration, Washington, D.C., Aug. 17-22.

Boiling, Chapter 9

J. Thome

Heat Transfer Handbook; New Jersey: Eds. A. Bejan and A.D. Krause, eds. Wiley&Sons, Hoboken, 2003. p. 635 - 717.

Falling Film Transitions between Droplet, Column and Sheet Modes on a Vertical Array of Horizontal 19 fpi and 40 fpi Low Finned Tubes

J. RoquesJ. Thome

Heat Transfer Engineering. 2003. DOI : 10.1080/714044413.

Two-Phase Flow Pattern Map for Evaporation in Horizontal Tubes: Latest Version

J. ThomeJ. El Hajal

Heat Transfer Engineering. 2003. DOI : 10.1080/714044410.

Flow Boiling in Horizontal Tubes: New Results for R-410A and R-134a Compared to R-22

L. WojtanJ. Thome

2003. 21st IIR International Congress of Refrigeration, Washington, D.C., Aug. 17-22, Paper ICR044, (2003)..

Condensation in Horizontal Tubes, Part 1: Two-Phase Flow Pattern Map

J. El HajalJ. ThomeA. Cavallini

International Journal of Heat and Mass Transfer. 2003. DOI : 10.1016/S0017-9310(03)00139-X.

On Recent Advances in Modelling of Two-Phase Flow and Heat Transfer

J. Thome

2003. 1st International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT2002, Kruger Park, South Africa, 8-10 April, 2002. p. 46 - 59. DOI : 10.1080/714044414.

Condensation in Horizontal Tubes, Part 2: New Heat Transfer Model Based on Flow Regimes

J. ThomeJ. El HajalA. Cavallini

International Journal of Heat and Mass Transfer. 2003. DOI : 10.1016/S0017-9310(03)00140-6.

Commentary on Correlations for Convective Vaporization in Tubes

J. ThomeR. L. Webb

Journal of Heat Transfer. 2003. DOI : 10.1115/1.1527902.

Simulation of Flow Patterns and Evaporation in Horizontal Flattened Tubes

J. ThomeJ. Hajal

2002.

Recent Advances in Modelling of Two-Phase Flow and Heat Transfer

J. Thome

HEFAT Conference, South Africa, April 8-10, 2002.

Evaporation and Two-Phase Flow in Microchannels

J. Thome

International Conference AICARR "Qualità Ambientale e Soluzione Sostenbili", Milano, Italy, March 5-9, 2002.

Falling Film Transitions on Plain and Enhanced Tubes

J. RoquesV. DupontJ. Thome

Heat Transfer. 2002. DOI : 10.1115/1.1458017.

Development of a Diabatic Two-Phase Flow Pattern Map for Horizontal Flow Boiling

O. ZürcherJ. R. ThomeD. Favrat

International Journal of Heat and Mass Transfer. 2002. DOI : 10.1016/S0017-9310(01)00146-6.

Two-Phase Flow Pattern Map for Evaporation in Horizontal Tubes: Latest Version

J. ThomeJ. Hajal

2002. 1st International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics 8-10 April, 2002, Kruger Park, South Africa,. p. 182 - 187.

Falling Film Transitions Between Droplets, Column and Sheet Flow Modes on a Vertical Array of Horizontal 19 FPI and 40 FPI Low Finned Tubes

J. RoquesJ. Thome

2002. 1st International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT2002, 8-10 April 2002, Kruger Park, South Africa. p. 523 - 528.

Evaporation of Refrigerants in a Horizontal tube: An Improved Flow Pattern Dependent Heat Transfer Model Compared to Ammonia Data

O. ZürcherJ. R. ThomeD. Favrat

Int. Journal of Heat and Mass Transfer. 2002. DOI : 10.1016/S0017-9310(01)00145-4.

Heat Transfer Model for Evaporation of Elongated Bubble Flows in Microchannels

A. JacobiJ. Thome

Journal of Heat Transfer. 2002. DOI : 10.1115/1.1517274.

Heat Transfer Coefficients during Condensation of the Zeotropic Mixture R-22/R-142b

F. SmitJ. ThomeJ. Meyer

Journal of Heat Transfer. 2002. DOI : 10.1115/1.1484108.

Evaporation and Two-Phase Flow in Microchannels

J. Thome

2002. Convegno Internationale AIRCARR "Qualità Ambientale e Soluzione Sostenbili", Milano, Italy, March 5-9, 2002.

Prediction of Two-Phase Pressure Gradients of Refrigerants in Horizontal Tubes

M. Ould DidiN. KattanJ. Thome

International Journal of Refrigeration. 2002. DOI : 10.1016/S0140-7007(01)00099-8.

Thermal Performance of Flooded Evaporators, Part 1: Review of Boiling Heat Transfer Studies

S. CasciaroJ. Thome

2001. ASHRAE Trans., Vol. 107, Part 1, pp. 903-918 2001.

Flow Regime Based Modeling of Two-Phase Heat Transfer

J. Thome

Multiphase Science and Technology. 2001.

Technique for Measurement of Void Fraction in Horizontal Tubes

L. WojtanT. UrsenbacherJ. Thome

2001. 3st International Conference on Enhancement Technology for the Process Industries, Davos, Switzerland, Davos, Switzerland, 1-6 July, 2001..

Flow Patterns and Phenomena for Falling Films on Plain and Enhanced Tube Arrays

J. RoquesJ. Thome

2001. 3st International conference on Compact heat Exchangers and Enhancement Technology for the Process Industries, Davos, Switzerland, 1-6 July, 2001.

Effects of Lubricants on Evaporation of Refrigerants in Plain and Enhanced Tubes

J. Thome

2001. Refrigeration International Congress, Assago Milano, Italy, 13 February, 2001.

Plafonds Froids Rayonnants: Simulations et Mesures

G. CourretJ. EggimannG. RouletO. SariJ. Thome

2001. CISBAT'01, Lausanne, October 3 – 4, 2001.

Thermal Performance of Flooded Evaporators, Part 2: Review of Void Fraction, Two-Phase Pressure Drop, and Flow Pattern Studies

S. CasciaroJ. Thome

2001. p. 919 - 930.

Effects of Lubricants on Evaporation of Refrigerants in Plain and Enhanced Tubes

J. Thome

International Refrigeration Congress, Milano, Italy, Feb. 13, 2001.

Invited Lecture Flow Regime Based Modeling of Two-Phase Heat Transfer United Engineering Foundation Conference

J. Thome

2000. Boiling 2000: Phenomena & Emerging Applications, Anchorage, Alaska, April 30 - May 5, 2000.

Flow Regime Based Modeling of Two-Phase Heat Transfer

J. Thome

Engineering Foundation Conf. Boiling 2000: Phenomena and Emerging Applications, Anchorage, Canada, April 30 - May 5, 2000..

Optical Measurement of Void Fraction, 2nd Japanese-European Two-Phase Flow Group Meeting

J. ThomeG. DunkelL. Wojtan

2000. Tsukuba, Japan, Sept. 25-29 2000 (attendence by invitation only).

An Onset of Nucleate Boiling Criterion for Horizontal Flow Boiling

O. ZürcherD. FavratJ. R. Thome

international journal of thermal sciences. 2000.

Enhancing Shell-and-Tube Heat Exchanger Performance: Opportunities not to be Missed

J. Thome

AspenWorld 2000 Conference, Orlando, USA, Feb. 7-11, 2000..

Falling Film Evaporation: State-of-the-Art Review of Recent Work

J. Thome

Journal of Enhanced Heat Transfer. 1999. DOI : 10.1615/JEnhHeatTransf.v6.i2-4.140.

In-Tube Flow Boiling of R-407C and R-407C/Oil Mixtures Part II: Plain Tube Results and Predictions

J. Thome

1999. ASHRAE Winter Annual Meeting Chicago USA, 20-23 January 1999.

Recent Advances in Modelling of Evaporation in Plain, Horizontal Tubes

J. ThomeN. Kattan

1999. International Conference « Compact Heat Exchanger and Enhancement Technology for the Process Industries » Banff, Canada, July 18-23, 1999. p. 303 - 309.

Two-Phase Flow Pattern Maps for Evaporating Flows in Horizontal Tubes: Recent Developments

J. ThomeN. Kattan

1999. International Conference « Compact Heat Exchanger and Enhancement Technology for the Process Industries », Banff, Canada, July 18-23, 1999. p. 279 - 284.

Boiling Heat Transfer for New Refrigerants

J. Thome

1999. International Congress on Refrigeration 99’, Milano, May 3-5, 1999.

In-Tube Flow Boiling of R-407C and R-407C/Oil Mixtures Part I: Microfin Tube

J. Thome

1999. ASHRAE Winter Annual Meeting Chicago, 20-23 January 1999.

Evaporation of Ammonia in a Smooth Horizontal Tube : Heat Transfer Measurements and Predictions

O. ZürcherD. FavratJ. R. Thome

journal of heat transfer. 1999. DOI : 10.1115/1.2825974.

Prediction of Intube Evaporation of New Refrigerants

J. Thome

International Refrigeration Congress, Milan, May 21, 1999.

Prediction of Two-Phase Flow Patterns for Evaporation of Refrigerant R–407C Inside Horizontal Tubes.

O. ZürcherD. FavratJ. R. Thome

1999. International Engineering Foundation 3rd Conference, Irsee, Germany, May 18-23, 1999. p. 287 - 292.

Flow Boiling of Refrigerant-Oil Mixtures in Plain and Enhanced Tubes, Energy Conservation through Heat Transfer Enhancement of Heat Exchangers

J. Thome

1998.

Intube Flow Boiling of R-407C and R-407C/Oil Mixtures. Part 2: Plain Tube Results and Predictions

O. ZürcherD. FavratJ. R. Thome

HVAC&R Research. 1998. DOI : 10.1080/10789669.1998.10391411.

Prediction of Intube Evaporation of New Refrigerants

J. Thome

1998. Invited Lecture, FREE’98, AICARR, Milan, 21 May 1998.

Flow Boiling in Horizontal Tubes. Part 2; New Heat Transfer Data for Five Refrigerants

N. KattanD. FavratJ. R. Thome

journal of heat transfer. 1998. DOI : 10.1115/1.2830038.

Intube Flow Boiling of R-407C and R-407C/Oil Mixtures. Part 1: Microfin Tube

O. ZürcherD. FavratJ. R. Thome

HVAC&R Research. 1998. DOI : 10.1080/10789669.1998.10391410.

Flow Boiling Inside Microfin Tubes: Recent Results and Design Methods

J. Thome

1998. Energy Conservation through Heat Transfer Enhancement of Heat Exchangers, NATO ASI, Izmir, Turkey, May 25 – June 5 (1998).

Flow Boiling in Horizontal Tubes. Part 1; Development of a Diabatic Two–Phase Flow Pattern Map

N. KattanD. FavratJ. R. Thome

journal of heat transfer. 1998. DOI : 10.1115/1.2830037.

Flow Boiling in Horizontal Tubes. Part 3; Development of a New Heat Transfer Model Based on Flow Pattern

N. KattanD. FavratJ. R. Thome

journal of heat transfer. 1998. DOI : 10.1115/1.2830039.

CONVECTIVE BOILING AND CONDENSATION

J. G. CollierJ. R. Thome

Oxford, England: Oxford University Press, 1994.

ENHANCED BOILING HEAT TRANSFER

J. Thome

New York: Hemisphere Pub. Corp. (Taylor & Francis), 1990.