Edouard Boujo
EPFL STI IGM LFMI
MED 2 2715 (Bâtiment MED)
Station 9
1015 Lausanne
+41 21 693 53 48
Office: MED 2 2615
EPFL › STI › IGM › LFMI
Website: https://lfmi.epfl.ch/
Education
BSc
| Fluid Dynamics2001 – 2004 Ecole Polytechnique, France
MSc
| Aeronautics2004 – 2006 Royal Inst. of Technology (KTH), Sweden
PhD
| Fluid Dynamics2009 – 2013 EPFL, Switzerland
Professionals experiences
Engineer in Aerodynamics and Thermal Simulation
At EPFL:
Journal Articles
Bistable flow dynamics of airfoil stall under varying angle of attack: A stochastic model with multiplicative noise
Physical Review E. 2025. DOI : 10.1103/8jz3-3j3t.On the symmetry-breaking instability of the flow past axisymmetric bluff bodies
Journal of Fluid Mechanics. 2025. DOI : 10.1017/jfm.2025.10402.Adjoint-aided Homogenisation for Flows Through Heterogeneous Membranes
JOURNAL OF FLUID MECHANICS. 2025. DOI : 10.1017/jfm.2025.277.Stability and dynamics of the laminar flow past rectangular prisms
JOURNAL OF FLUID MECHANICS. 2025. DOI : 10.1017/jfm.2025.165.A general model for spin coating on a non-axisymmetric curved substrate
Journal of Fluid Mechanics. 2024. DOI : 10.1017/jfm.2024.654.Noise-induced transitions past the onset of a steady symmetry-breaking bifurcation: The case of the sudden expansion
Phys. Rev. Fluids. 2024. DOI : 10.1103/PhysRevFluids.9.053905.Three-dimensional nonlinear dynamics of a thin liquid film on a spinning ellipsoid
Physics Of Fluids. 2023. DOI : 10.1063/5.0151169.From thin plates to Ahmed bodies: linear and weakly nonlinear stability of rectangular prisms
Journal of Fluid Mechanics. 2023. DOI : 10.1017/jfm.2023.426.Liquid film instability of an internally coated horizontal tube
Physical Review Fluids. 2023. DOI : 10.1103/PhysRevFluids.8.053901.Weakly nonlinear evolution of stochastically driven non-normal systems
Journal of Fluid Mechanics. 2022. DOI : 10.1017/jfm.2022.902.Weak nonlinearity for strong non-normality
Journal of Fluid Mechanics. 2022. DOI : 10.1017/jfm.2022.664.Thin Liquid Film Dynamics on a Spinning Spheroid
Fluids. 2021. DOI : 10.3390/fluids6090318.Second-order adjoint-based sensitivity for hydrodynamic stability and control
Journal of Fluid Mechanics. 2021. DOI : 10.1017/jfm.2021.425.Optimal spanwise-periodic control for recirculation length in a backward-facing step flow
Physical Review Fluids. 2020. DOI : 10.1103/PhysRevFluids.5.083901.Second-order sensitivity in the cylinder wake: Optimal spanwise-periodic wall actuation and wall deformation
Physical Review Fluids. 2019. DOI : 10.1103/PhysRevFluids.4.053901.Revisiting the drag reduction problem using adjoint-based distributed forcing of laminar and turbulent flows over a circular cylinder
European Journal of Mechanics B-Fluids. 2018. DOI : 10.1016/j.euromechflu.2018.03.009.Numerical simulation and sensitivity analysis of a low-Reynolds-number flow around a square cylinder controlled using plasma actuators
Physical Review Fluids. 2017. DOI : 10.1103/PhysRevFluids.2.043901.Sensitivity and open-loop control of stochastic response in a noise amplifier flow: the backward-facing step
Journal of Fluid Mechanics. 2015. DOI : 10.1017/jfm.2014.656.Second-order sensitivity of parallel shear flows and optimal spanwise-periodic flow modifications
Journal of Fluid Mechanics. 2015. DOI : 10.1017/jfm.2015.543.Open-loop control of a separated boundary layer
Comptes Rendus Mécanique. 2014. DOI : 10.1016/j.crme.2014.01.014.Sensitivity of aerodynamic forces in laminar and turbulent flow past a square cylinder
Physics Of Fluids. 2014. DOI : 10.1063/1.4896941.Controlled reattachment in separated flows: a variational approach to recirculation length reduction
Journal of Fluid Mechanics. 2014. DOI : 10.1017/jfm.2014.23.Manipulating flow separation: sensitivity of stagnation points, separatrix angles and recirculation area to steady actuation
Proceedings of the Royal Society A. 2014. DOI : 10.1098/rspa.2014.0365.Open-loop control of noise amplification in separated boundary layers
Physics Of Fluids. 2013. DOI : 10.1063/1.4846916.Conference Papers
Pushing amplitude equations far from threshold: application to the supercritical Hopf bifurcation in the cylinder wake
2016. 6th International Symposium on Instability and Bifurcations in Fluid Dynamics (BIFD). DOI : 10.1088/0169-5983/48/6/061401.Open-loop control of a separated boundary layer
2013. 3rd GDR "Separation Flow Control" Symposium, Lille, France, November 7-8, 2013.Etude expérimentale de l’écoulement derrière une bosse
2011. 20ème Congrès Français de Mécanique, Besançon, France, August 29 - September 2nd, 2011. p. 1 - 6.Theses
An adjoint-based approach to the optimal control of separated flows
Lausanne, EPFL, 2014. DOI : 10.5075/epfl-thesis-6234.Talks
A linearized approach for the control of aerodynamic forces in flow past a square cylinder
10th European Fluid Mechanics Conference, Copenhagen, Denmark, 14-18 September, 2014.Sensitivity of stochastic perturbations in a noise amplifier flow
10th European Fluid Mechanics Conference, Copenhagen, Denmark, 14-18 September, 2014.Second-order sensitivity of parallel shear flows and optimal spanwise-periodic flow modifications
67th Annual Meeting of the APS Division of Fluid Dynamics, San Francisco, USA, November 23–25, 2014.Sensitivity of aerodynamic forces in laminar and turbulent flow past a square cylinder
67th Annual Meeting of the APS Division of Fluid Dynamics, San Francisco, USA, November 23–25, 2014.Forced reattachment in separated flows: a variational approach to recirculation length reduction
colloquium Euromech 547 “Trends in Open Shear Flow Instability”, Palaiseau, France, July 1-3, 2013.Sensitivity of optimal gains in a detached boundary layer
9th European Fluid Mechanics Conference, Rome, Italy, September 9-13, 2012.Optimal open-loop control of the recirculation length in the wake of a cylinder
65th Annual Meeting of the American Physical Society’s Division of Fluid Dynamics, San Diego, USA, November 18-20, 2012.Teaching & PhD
PhD Students
Ismael Leal Askerova, Atharva Nilesh Lagwankar
Courses
Finite element modelling and simulation
ME-373
The objective of this course is to learn how to carry out rigorous and critical finite element analyzes of realistic problems in solid mechanics using state-of-the-art CAE software.
Numerical flow simulation
ME-474
This course provides practical experience in the numerical simulation of fluid flows. Numerical methods are presented in the framework of the finite volume method. A simple solver is developed with Matlab, and a commercial software is used for more complex problems.