Andreas Mortensen
Professeur ordinaire
andreas.mortensen@epfl.ch +41 21 693 29 12 http://lmm.epfl.ch/
EPFL STI IMX LMM
MXD 140 (Bâtiment MXD)
Station 12
1015 Lausanne
Web site: Site web: https://lmm.epfl.ch/
Mission
Les activités de recherche et dBiographie
Né à San Francisco en 1957, dPublications
Publications Infoscience
2023
On the slip burst amplitude cutoff in dislocation-rich microcrystals
Acta Materialia. 2023. Vol. 264, p. 119582. DOI : 10.1016/j.actamat.2023.119582.Room-temperature strength of the interfacial bond between silica inclusions and iron
Acta Materialia. 2023. Vol. 263, p. 119502. DOI : 10.1016/j.actamat.2023.119502.Phase Transformation-Induced Interfacial Debonding of Silica Inclusions in Iron
Metallurgical And Materials Transactions B-Process Metallurgy And Materials Processing Science. 2023. Vol. 55, num. 1, p. 1 - 7. DOI : 10.1007/s11663-023-02939-6.Intermittent tensile deformation of silver microcastings: Influence of the strain rate
Scripta Materialia. 2023. Vol. 239, p. 115820. DOI : 10.1016/j.scriptamat.2023.115820.The effect of size, orientation and temperature on the deformation of microcast silver crystals
Acta Materialia. 2023. Vol. 249, p. 118817. DOI : 10.1016/j.actamat.2023.118817.Nanoindentation of embedded particles
Journal Of Materials Research. 2023. DOI : 10.1557/s43578-023-00920-2.2022
Coupling silicon lithography with metal casting
Applied Materials Today. 2022. Vol. 29, p. 101647. DOI : 10.1016/j.apmt.2022.101647.On the bulk compressibility of close-packed particles and their composites
Composites Part A-Applied Science And Manufacturing. 2022. Vol. 161, p. 107106. DOI : 10.1016/j.compositesa.2022.107106.The thermally activated deformation behaviour of single-crystalline microcast aluminium wires
Acta Materialia. 2022. Vol. 234, p. 118037. DOI : 10.1016/j.actamat.2022.118037.A method for cleaning flat punch diamond microprobe tips
Micron. 2022. Vol. 155, p. 103217. DOI : 10.1016/j.micron.2022.103217.Investment casting of periodic aluminum cellular structures using slurry-cast table salt moulds
Materials & Design. 2022. Vol. 215, p. 110488. DOI : 10.1016/j.matdes.2022.110488.Strong silicon oxide inclusions in iron
Acta Materialia. 2022. Vol. 242, p. 118437. DOI : 10.1016/j.actamat.2022.118437.2021
Surface energy contributions to the work of infiltration in metal matrix composite processing
Scripta Materialia. 2021. Vol. 206, p. 114223. DOI : 10.1016/j.scriptamat.2021.114223.3D metal freeform micromanufacturing
Journal of Manufacturing Processes. 2021. Vol. 68, p. 867 - 876. DOI : 10.1016/j.jmapro.2021.06.002.Simulating Infiltration as a Sequence of Pinning and De-pinning Processes
Acta Materialia. 2021. Vol. 210, p. 116831. DOI : 10.1016/j.actamat.2021.116831.Finite element simulation of the Portevin-Le Chatelier effect in highly reinforced metal matrix composites
Philosophical Magazine. 2021. Vol. 101, num. 12, p. 1471 - 1489. DOI : 10.1080/14786435.2021.1919331.Processing and micro-mechanical characterization of multi-component transition MC carbides in iron
Journal of the European Ceramic Society. 2021. Vol. 41, num. 7, p. 3937 - 3946. DOI : 10.1016/j.jeurceramsoc.2021.02.044.2020
Mechanical properties and cytocompatibility of dense and porous Zn produced by laser powder bed fusion for biodegradable implant applications
Acta Biomaterialia. 2020. Vol. 110, p. 289 - 302. DOI : 10.1016/j.actbio.2020.04.006.Kinetic processes in the high-temperature pressure-infiltration of Al into Al2O3
Acta Materialia. 2020. Vol. 189, p. 105 - 117. DOI : 10.1016/j.actamat.2020.02.048.2019
Mechanical properties of replicated cellular Zn and Zn1.5Mg in uniaxial compression
Materials Characterization. 2019. Vol. 157, p. 109895. DOI : 10.1016/j.matchar.2019.109895.Laue microdiffraction characterisation of as-cast and tensile deformed Al microwires
Philosophical Magazine. 2019. p. 185503. DOI : 10.1080/14786435.2019.1605220.The effect of size on the plastic deformation of annealed cast aluminium microwires
Scripta Materialia. 2019. Vol. 161, p. 58 - 61. DOI : 10.1016/j.scriptamat.2018.10.009.2018
Stress relaxation in the presence of sudden strain bursts: Methodology and stress relaxation data of microcast aluminium microwires
Data In Brief. 2018. Vol. 21, p. 2134 - 2141. DOI : 10.1016/j.dib.2018.11.047.On the diametric compression strength test of brittle spherical particles
European Journal Of Mechanics A-Solids. 2018. Vol. 72, p. 148 - 154. DOI : 10.1016/j.euromechsol.2018.04.016.Meridian crack test strength of plasma-sprayed amorphous and nanocrystalline ceramic microparticles
ACTA MATERIALIA. 2018. Vol. 145, p. 278 - 289. DOI : 10.1016/j.actamat.2017.12.031.In-situ strength of individual silicon particles within an aluminium casting alloy
Acta Materialia. 2018. Vol. 143, p. 67 - 76. DOI : 10.1016/j.actamat.2017.09.058.2017
Compression testing spherical particles for strength: Theory of the meridian crack test and implementation for microscopic fused quartz
Journal Of The Mechanics And Physics Of Solids. 2017. Vol. 99, p. 70 - 92. DOI : 10.1016/j.jmps.2016.11.009.Stable room-temperature micron-scale crack growth in single-crystalline silicon
Journal Of Materials Research. 2017. Vol. 32, num. 19, p. 3617 - 3626. DOI : 10.1557/jmr.2017.238.Fluid flow through replicated microcellular materials in the Darcy-Forchheimer regime
Acta Materialia. 2017. Vol. 126, p. 280 - 293. DOI : 10.1016/j.actamat.2016.12.067.Silicon particle pinhole defects in aluminium–silicon alloys
Journal of Materials Science. 2017. Vol. 52, num. 2, p. 858 - 868. DOI : 10.1007/s10853-016-0381-y.The local strength of individual alumina particles
Journal Of The Mechanics And Physics Of Solids. 2017. Vol. 109, p. 34 - 49. DOI : 10.1016/j.jmps.2017.08.005.Occurrence of the Portevin Le-Chatelier effect in open-cell microcellular Al-2 wt% Mg
Scripta Materialia. 2017. Vol. 132, p. 13 - 16. DOI : 10.1016/j.scriptamat.2017.01.020.Cast aluminium single crystals cross the threshold from bulk to size-dependent stochastic plasticity
Nature Materials. 2017. Vol. 16, p. 730 - 736. DOI : 10.1038/nmat4911.2016
Effect of hydrostatic pressure on flow and deformation in highly reinforced particulate composites
Acta Materialia. 2016. Vol. 117, p. 345 - 355. DOI : 10.1016/j.actamat.2016.06.052.Microscopic strength of silicon particles in an aluminium–silicon alloy
Acta Materialia. 2016. Vol. 105, p. 165 - 175. DOI : 10.1016/j.actamat.2015.12.006.Fracture toughness measurement in fused quartz using triangular chevron-notched micro-cantilevers
Scripta Materialia. 2016. Vol. 112, p. 132 - 135. DOI : 10.1016/j.scriptamat.2015.09.032.2015
Fracture toughness testing of nanocrystalline alumina and fused quartz using chevron-notched microbeams
Acta Materialia. 2015. Vol. 86, p. 385 - 395. DOI : 10.1016/j.actamat.2014.12.016.The local strength of microscopic alumina reinforcements
Acta Materialia. 2015. Vol. 100, p. 215 - 223. DOI : 10.1016/j.actamat.2015.08.026.Influence of the wetting angle on capillary forces in pressure infiltration
Acta Materialia. 2015. Vol. 91, p. 57 - 69. DOI : 10.1016/j.actamat.2015.03.002.On measuring fracture toughness under load control in the presence of slow crack growth
Journal Of The European Ceramic Society. 2015. Vol. 35, num. 11, p. 3155 - 3166. DOI : 10.1016/j.jeurceramsoc.2015.04.004.Designing laminated metal composites for tensile ductility
Materials & Design. 2015. Vol. 66, p. 412 - 420. DOI : 10.1016/j.matdes.2014.08.061.2014
Percolation and Universal Scaling in Composite Infiltration Processing
Materials Research Letters. 2014. Vol. 3, num. 1, p. 7 - 15. DOI : 10.1080/21663831.2014.948692.Influence of microstructural heterogeneity on the scaling between flow stress and relative density in microcellular Al-4.5 %Cu
Journal Of Materials Science. 2014. Vol. 49, num. 6, p. 2403 - 2414. DOI : 10.1007/s10853-013-7852-1.Tensile elongation of unidirectional or laminated composites combining a brittle reinforcement with a ductile strain and strain-rate hardening matrix
Acta Materialia. 2014. Vol. 71, p. 31 - 43. DOI : 10.1016/j.actamat.2014.02.043.Infiltration of tin bronze into alumina particle beds: influence of alloy chemistry on drainage curves
Journal Of Materials Science. 2014. Vol. 49, num. 22, p. 7669 - 7678. DOI : 10.1007/s10853-014-8475-x.Infiltrated Cu8Al-Ti alumina composites
Composites Part A-Applied Science And Manufacturing. 2014. Vol. 66, p. 1 - 15. DOI : 10.1016/j.compositesa.2014.06.019.2013
Scaling of conductivity and Young’s modulus in replicated microcellular materials
Journal of Materials Science. 2013. Vol. 48, p. 8140 - 8146. DOI : 10.1007/s10853-013-7626-9.On the load-bearing efficiency of open-cell foams: A comparison of two architectures related to two processes
Scripta Materialia. 2013. Vol. 68, num. 1, p. 44 - 49. DOI : 10.1016/j.scriptamat.2012.05.048.The plasticity size effect in replicated microcellular aluminium
Scripta Materialia. 2013. Vol. 69, num. 6, p. 469 - 472. DOI : 10.1016/j.scriptamat.2013.05.044.In situ copper–alumina composites
Materials Science and Engineering: A. 2013. Vol. 585, p. 396 - 407. DOI : 10.1016/j.msea.2013.07.074.Influence of quench rate and microstructure on bendability of AA6016 aluminum alloys
Materials Science and Engineering: A. 2013. Vol. 559, p. 558 - 565. DOI : 10.1016/j.msea.2012.08.141.2012
An analysis of the tensile elongation to failure of laminated metal composites in the presence of strain-rate hardening
Acta Materialia. 2012. Vol. 60, num. 5, p. 2265 - 2276. DOI : 10.1016/j.actamat.2011.12.041.Al2O3 particle rounding in molten copper and Cu8wt%Al
Journal Of Materials Science. 2012. Vol. 47, p. 6346 - 6353. DOI : 10.1007/s10853-012-6559-z.Capillarity in pressure infiltration: improvements in characterization of high-temperature systems
Journal of Materials Science. 2012. Vol. 47, num. 24, p. 8419 - 8430. DOI : 10.1007/s10853-012-6645-2.On measuring wettability in infiltration processing (vol 56, pg 859, 2007)
Scripta Materialia. 2012. Vol. 67, num. 5, p. 519 - 520. DOI : 10.1016/j.scriptamat.2012.06.001.Fracture of convoluted and lamellar α2 + γ TiAl alloys
Intermetallics. 2012. Vol. 22, p. 176 - 188. DOI : 10.1016/j.intermet.2011.11.001.Tensile strength of axially loaded unidirectional Nextel 610 (TM) reinforced aluminium: A case study in local load sharing between randomly distributed fibres
Composites Part A-Applied Science And Manufacturing. 2012. Vol. 43, p. 129 - 137. DOI : 10.1016/j.compositesa.2011.09.027.2011
Creep of replicated microcellular aluminium
Acta Materialia. 2011. Vol. 59, num. 2, p. 440 - 450. DOI : 10.1016/j.actamat.2010.09.037.Fatigue and cyclic creep of replicated microcellular aluminium
Materials Science and Engineering: A. 2011. Vol. 528, num. 6, p. 2657 - 2663. DOI : 10.1016/j.msea.2010.12.007.On measured activation volumes as relevant to ratcheting or cyclic creep
Scripta Materialia. 2011. Vol. 65, num. 9, p. 787 - 790. DOI : 10.1016/j.scriptamat.2011.07.032.Thermally activated deformation of two- and three-variant nanotwinned L10 Au–Cu–Pt
Intermetallics. 2011. Vol. 19, num. 7, p. 988 - 996. DOI : 10.1016/j.intermet.2011.03.002.Hole and notch sensitivity of aluminium replicated foam
Acta Materialia. 2011. Vol. 59, num. 2, p. 572 - 581. DOI : 10.1016/j.actamat.2010.09.061.L10 nanotwinned gold-rich Au–Cu–Pt
Acta Materialia. 2011. Vol. 59, num. 8, p. 3184 - 3195. DOI : 10.1016/j.actamat.2011.01.058.Laminated Metal Composites by Infiltration
Metallurgical and Materials Transactions A. 2011. Vol. 42, num. 11, p. 3509 - 3520. DOI : 10.1007/s11661-011-0756-2.Multiaxial yield behaviour of Al replicated foam
Journal of the Mechanics and Physics of Solids. 2011. Vol. 59, num. 9, p. 1777 - 1793. DOI : 10.1016/j.jmps.2011.05.015.Activation volume in microcellular aluminium: Size effects in thermally activated plastic flow
Acta Materialia. 2011. Vol. 59, num. 18, p. 6869 - 6879. DOI : 10.1016/j.actamat.2011.07.021.Solid state transformations of Au-Cu-Pt alloys studied by in-situ X-ray synchrotron radiation and DSC
Intermetallics. 2011. Vol. 19, num. 5, p. 726 - 737. DOI : 10.1016/j.intermet.2011.01.014.Thermal conductivity and interfacial conductance of AlN particle reinforced metal matrix composites
Journal of Applied Physics. 2011. Vol. 109, num. 6, p. 064907. DOI : 10.1063/1.3553870.2010
Fracture toughness of Al replicated foam
Acta Materialia. 2010. Vol. 58, num. 14, p. 4590 - 4603. DOI : 10.1016/j.actamat.2010.04.025.A collection of papers on Materials Science to celebrate the 80th birthday of Professor Anthony Kelly, CBE, FRS
Philosophical Magazine. 2010. Vol. 90, num. 31, p. 4075 - 4080. DOI : 10.1080/14786435.2010.520835.Influence of chemistry and microstructure on the activation volume of TiAl alloys
Intermetallics. 2010. Vol. 18, num. 11, p. 2145 - 2153. DOI : 10.1016/j.intermet.2010.06.022.Preface to the viewpoint set: Triple lines
Scripta Materialia. 2010. Vol. 62, num. 12, p. 887 - 888. DOI : 10.1016/j.scriptamat.2010.03.018.Fracture of high volume fraction ceramic particle reinforced aluminium under multiaxial stress
Acta Materialia. 2010. Vol. 58, num. 11, p. 3895 - 3907. DOI : 10.1016/j.actamat.2010.03.037.Solidification of Al-4.5 wt pct Cu-Replicated Foams
Metallurgical and Materials Transactions A. 2010. Vol. 41, num. 8, p. 2048 - 2055. DOI : 10.1007/s11661-010-0297-0.Metal Matrix Composites
Annual Review of Materials Research. 2010. Vol. 40, num. 1, p. 243 - 270. DOI : 10.1146/annurev-matsci-070909-104511.Measurement and anisotropy of grain boundary energy in Cu-1 wt.% PB
Scripta Materialia. 2010. Vol. 62, p. 262 - 265. DOI : 10.1016/j.scriptamat.2009.11.012.Yield surface of polyurethane and aluminium replicated foam
Acta Materialia. 2010. Vol. 58, num. 15, p. 5168 - 5183. DOI : 10.1016/j.actamat.2010.05.053.Influence of reinforcement contiguity on the thermal expansion of alumina particle reinforced aluminium composites
International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde). 2010. Vol. 101, num. 09, p. 1113 - 1120. DOI : 10.3139/146.110388.Improvement of elevated temperature mechanical properties of Cu–Ni–Sn–Pb alloys
Materials Science and Engineering: A. 2010. Vol. 527, num. 16-17, p. 4326 - 4333. DOI : 10.1016/j.msea.2010.03.056.Materials science: Pleated crystals
Nature. 2010. Vol. 468, num. 7326, p. 906 - 907. DOI : 10.1038/468906a.2009
Intermediate temperature embrittlement of copper alloys
International Materials Reviews. 2009. Vol. 54, num. 2, p. 94 - 116. DOI : 10.1179/174328009X392967.Particle fracture in high volume fraction ceramic reinforced metals: governing parameters and implications for composite failure
Journal of the Mechanics and Physics of Solids. 2009. Vol. 57, num. 11, p. 1781 - 1800. DOI : 10.1016/j.jmps.2009.08.005.Dihedral Angles in Cu-1wt.%Pb: Grain Boundary Energy and Grain Boundary Triple Line Effects
Acta Materialia. 2009. Vol. 57, num. 8, p. 2527 - 2537. DOI : 10.1016/j.actamat.2009.02.009.Surface oxide in replicated microcellular aluminium and its influence on the plasticity size effect
Acta Materialia. 2009. Vol. 57, p. 286 - 294. DOI : 10.1016/j.actamat.2008.09.008.Processing of Ag-Cu alloy foam by the replication process
Scripta Materialia. 2009. Vol. 61, p. 351 - 354. DOI : 10.1016/j.scriptamat.2009.04.024.Young's modulus of ceramic particle reinforced aluminium: measurement by the Impulse Excitation Technique and confrontation with analytical models
Composites Part A. 2009. Vol. 40, p. 524 - 529. DOI : 10.1016/j.compositesa.2009.02.001.Ductile-to-brittle transition in tensile failure of particle reinforced metals
Journal of the Mechanics and Physics of Solids. 2009. Vol. 57, p. 473 - 499. DOI : 10.1016/j.jmps.2008.11.006.In situ flow stress of pure aluminium constrained by tightly packed alumina fibres
Acta Materialia. 2009. Vol. 57, num. 6, p. 1795 - 1812. DOI : 10.1016/j.actamat.2008.12.024.Creep of aluminium-magnesium open cell foam
Acta Materialia. 2009. Vol. 57, p. 830 - 837. DOI : 10.1016/j.actamat.2008.10.019.Microstructure, Strength and Creep of Aluminium-nickel Open Cell Foam
Philosophical Magazine. 2009. Vol. 89, num. 13, p. 1121 - 1139. DOI : 10.1080/14786430902915396.2008
Age-hardening Response of Replicated Microcellular Al-4.5%Cu
Advanced Engineering Materials. 2008. Vol. 10, num. 9, p. 849 - 852. DOI : 10.1002/adem.200800086.High-temperature wettability of aluminum nitride during liquid metal infiltration
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2008. Vol. 495, num. 1-2, p. 197 - 202. DOI : 10.1016/j.msea.2007.12.050.Direct measurement of drainage curves in infiltration of SiC particle preforms: influence of interfacial reactivity
Journal Of Materials Science. 2008. Vol. 43, num. 15, p. 5061 - 5067. DOI : 10.1007/s10853-008-2670-6.Thermal conductivity of Al-SiC composites with monomodal and bimodal particle size distribution
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2008. Vol. 480, num. 1-2, p. 483 - 488. DOI : 10.1016/j.msea.2007.07.026.Coordination measurements in compacted NaCl irregular powders using X-ray microtomography
Journal Of The European Ceramic Society. 2008. Vol. 28, num. 13, p. 2441 - 2449. DOI : 10.1016/j.jeurceramsoc.2008.03.041.Equilibrium shape of a liquid intergranular inclusion in a stressed elastic solid
Scripta Materialia. 2008. Vol. 58, num. 7, p. 610 - 613. DOI : 10.1016/j.scriptamat.2007.11.024.Measurement of damage evolution in continuous ceramic fibre-reinforced metals by acoustic emission
Scripta Materialia. 2008. Vol. 59, num. 8, p. 842 - 845. DOI : 10.1016/j.scriptamat.2008.06.027.Tensile flow stress of ceramic particle-reinforced metal in the presence of particle cracking
Acta Materialia. 2008. Vol. 56, num. 16, p. 4402 - 4416. DOI : 10.1016/j.actamat.2008.05.004.Fifth International Conference on High Temperature Capillarity HTC-2007, Alicante, Spain Preface
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2008. Vol. 495, num. 1-2, p. 1 - 2. DOI : 10.1016/j.msea.2008.05.011.Fracture behavior of low-density replicated aluminum alloy foams
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2008. Vol. 496, num. 1-2, p. 376 - 382. DOI : 10.1016/j.msea.2008.05.036.Direct measurement of drainage curves in infiltration of SiC particle preforms
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2008. Vol. 495, num. 1-2, p. 203 - 207. DOI : 10.1016/j.msea.2008.01.074.2007
Microcellular aluminium? Child's play!
Advanced Engineering Materials. 2007. Vol. 9, num. 11, p. 951 - 954. DOI : 10.1002/adem.200700190.Diffusion-limited reactive wetting: effect of interfacial reaction behind the advancing triple line
Journal of Materials Science. 2007. Vol. 42, num. 19, p. 8071 - 8082. DOI : 10.1007/s10853-007-1915-0.On the steady-state creep of microcellular metals
Scripta Materialia. 2007. Vol. 57, num. 1, p. 33 - 36. DOI : 10.1016/j.scriptamat.2007.03.013.Spherical pore replicated Microcellular Aluminium
Materials Science and Engineering A. 2007. Vol. 465, num. 1-2, p. 124 - 135. DOI : 10.1016/j.msea.2007.02.002.Infiltration of graphite preforms with Al-Si eutectic alloy and mercury
Scripta Materialia. 2007. Vol. 56, num. 11, p. 991. DOI : 10.1016/j.scriptamat.2007.01.042.Influence of the infiltration pressure on the structure and properties of replicated aluminium foams
Materials Science and Engineering A. 2007. Vol. 462, num. 1-2, p. 68 - 75. DOI : 10.1016/j.msea.2006.03.157.On measuring wettability in infiltration processing
Scripta Materialia. 2007. Vol. 56, num. 10, p. 859 - 862. DOI : 10.1016/j.scriptamat.2007.02.002.2006
Replication processing of highly porous materials
ADVANCED ENGINEERING MATERIALS. 2006. Vol. 8, num. 9, p. 795 - 803. DOI : 10.1002/adem.200600077.Capillary shape equilibration of liquid inclusions embedded in a partly soluble solid
Scripta Materialia. 2006. Vol. 55, num. 10, p. 955. DOI : 10.1016/j.scriptamat.2006.06.036.Functional grading of metal foam cores for yield-limited lightweight sandwich beams
Scripta Materialia. 2006. Vol. 54, num. 4 SPEC. ISS., p. 539. DOI : 10.1016/j.scriptamat.2005.10.050.The electrical conductivity of microcellular metals
Journal Of Applied Physics. 2006. Vol. 100, num. 4, p. 044912. DOI : 10.1063/1.2335672.Uniaxial deformation of microcellular metals
Acta Materialia. 2006. Vol. 54, num. 16, p. 4129. DOI : 10.1016/j.actamat.2006.03.054.Increasing the strength/toughness combination of high volume fraction particulate metal matrixComposites using an Al-Ag matrix alloy
Advanced Engineering Materials. 2006. Vol. 8, num. 1-2, p. 56. DOI : 10.1002/adem.200500185.Simplified prediction of the monotonic uniaxial stress-strain curve of non-linear particulate composites
Acta Materialia. 2006. Vol. 54, num. 8, p. 2145. DOI : 10.1016/j.actamat.2006.01.002.Reactivity and thermal behaviour ofCu-Si/SiC composites: effects of SiC oxidation
Materials Science and Technology. 2006. Vol. 22, num. 12, p. 1464 - 1468. DOI : 10.1179/174328406X131000.The effect of preform processing on replicated aluminium foam structure and mechanical properties
Scripta Materialia. 2006. Vol. 54, num. 12, p. 2069. DOI : 10.1016/j.scriptamat.2006.03.003.Sintering of NaCl powder: Mechanisms and first stage kinetics
Journal Of The European Ceramic Society. 2006. Vol. 26, num. 16, p. 3487 - 3497. DOI : 10.1016/j.jeurceramsoc.2005.12.020.2005
A stereoscopic method for dihedral angle measurement
Journal of Materials Science. 2005. Vol. 40, num. 12, p. 3121. DOI : 10.1007/s10853-005-2673-5.Measuring and tailoring capillary forces during liquid metal infiltration
Current Opinion In Solid State & Materials Science. 2005. Vol. 9, num. 4-5, p. 196 - 201. DOI : 10.1016/j.cossms.2006.02.007.Ductility of Saffil(TM) short fibre reinforced metals
Scripta Materialia. 2005. Vol. 53, num. 1, p. 17 - 21. DOI : 10.1016/j.scriptamat.2005.03.027.Graded open-cell aluminium foam core sandwich beams
Materials Science and Engineering A. 2005. Vol. 404, num. 1-2, p. 9. DOI : 10.1016/j.msea.2005.05.096.Damage accumulation during cyclic loading of a continuous alumina fibre reinforced aluminium composite
Scripta Materialia. 2005. Vol. 53, num. 10, p. 1111 - 1115. DOI : 10.1016/j.scriptamat.2005.07.024.Damage evolution in Saffil alumina short-fibre reinforced aluminium during tensile testing
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2005. Vol. 395, num. 1-2, p. 27 - 34. DOI : 10.1016/j.msea.2004.12.009.Permeability of open-pore microcellular materials
Acta Materialia. 2005. Vol. 53, num. 5, p. 1381. DOI : 10.1016/j.actamat.2004.11.031.Longitudinal deformation of fibre reinforced metals: Influence of fibre distribution on stiffness and flow stress
Mechanics of Materials. 2005. Vol. 37, num. 1-17, p. 1. DOI : 10.1016/j.mechmat.2003.12.001.Wetting in infiltration of alumina particle preforms with molten copper
Journal Of Materials Science. 2005. Vol. 40, num. 9-10, p. 2487 - 2491. DOI : 10.1007/s10853-005-1980-1.2004
Particle reinforced metals of high ceramic content
Materials Science and Engineering A. 2004. Vol. 387-389, num. 1-2 SPEC. ISS., p. 822. DOI : 10.1016/j.msea.2004.05.054.Damage evolution of Nextel 610? alumina fibre reinforced aluminium
Acta Materialia. 2004. Vol. 52, num. 3, p. 573. DOI : 10.1016/j.actamat.2003.09.040.Fracture of aluminium reinforced with densely packed ceramic particles: influence of matrix hardening
Acta Materialia. 2004. Vol. 52, num. 18, p. 5331 - 5345. DOI : 10.1016/j.actamat.2004.07.038.Fracture of aluminium reinforced with densely packed ceramic particles: Link between the local and the total work of fracture
Acta Materialia. 2004. Vol. 52, num. 5, p. 1337 - 1351. DOI : 10.1016/j.actamat.2003.11.019.Wetting, interfacial interactions and sticking in glass/steel systems
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2004. Vol. 384, num. 1-2, p. 117 - 128. DOI : 10.1016/j.msea.2004.05.045.Tensile behavior of replicated aluminium foams
Advanced Engineering Materials. 2004. Vol. 6, num. 6, p. 444. DOI : 10.1002/adem.200405155.Processing of NaCI powders of controlled size and shape for the microstructural tailoring of aluminium foams
Materials Science and Engineering A. 2004. Vol. 374, num. 1-2, p. 250. DOI : 10.1016/j.msea.2004.03.015.Investigation of crack-tip plasticity in high volume fraction particulate metal matrix composites
Engineering Fracture Mechanics. 2004. Vol. 71, num. 16-17, p. 2385. DOI : 10.1016/j.engfracmech.2004.01.006.Uniaxial deformation of open-cell aluminum foam: The role of internal damage
Acta Materialia. 2004. Vol. 52, num. 10, p. 2895 - 2902. DOI : 10.1016/j.actamat.2004.02.035.2003
On the electrical conductivity of metal matrix composites containing high volume fractions of non-conducting inclusions
Acta Materialia. 2003. Vol. 51, num. 11, p. 3199 - 3211. DOI : 10.1016/S1359-6454(03)00141-1.Corrigendum on the tensile behaviour of infiltrated alumina particle reinforced aluminium composites
Acta Materialia. 2003. Vol. 51, num. 20, p. 6493. DOI : 10.1016/S1359-6454(03)00431-2.On the influence of the shape of randomly oriented, nonconducting inclusions in a conducting matrix on the effective electrical conductivity
Acta Materialia. 2003. Vol. 51, num. 2, p. 495 - 505. DOI : 10.1016/S1359-6454(02)00432-9.Geometrically necessary dislocations and strain-gradient plasticity: A few critical issues
Scripta Materialia. 2003. Vol. 48, num. 2, p. 119. DOI : 10.1016/S1359-6462(02)00335-4.The influence of non-linear elasticity on the determination of Weibull parameters using the fibre bundle tensile test
Composites Part A: Applied Science and Manufacturing. 2003. Vol. 34, num. 9, p. 907. DOI : 10.1016/S1359-835X(03)00134-9.Transmitted light microscopy of a fibre reinforced metal
Journal of Microscopy. 2003. Vol. 209, num. 1, p. 8 - 12. DOI : 10.1046/j.1365-2818.2003.01097.x.Erratum: Influence of heat treatment and particle shape on mechanical properties of infiltrated Al2O3 particle reinforced Al-2 wt-% Cu (Materials Science and Technology, (December 2002) 18 (1461-1470))
Materials Science and Technology. 2003. Vol. 19, num. 4, p. 549 - 550. DOI : 10.1179/026708303225002956.2002
Influence of heat treatment and particle shape on mechanical properties of infiltrated Al2O3 particle reinforced Al-2 wt-%Cu
Materials Science and Technology. 2002. Vol. 18, num. 12, p. 1461. DOI : 10.1179/026708302225007754.Structural materials - Or materials with a structural function
L'Actualité Chimique. 2002. num. 3, p. 13 - 15.Quasistatic and dynamic compression of aluminum-oxide particle reinforced pure aluminum
Materials Science and Engineering A. 2002. Vol. 337, num. 1-2, p. 202. DOI : 10.1016/S0921-5093(02)00035-7.The effect of prior deformation on the foaming behavior of 'FORMGRIP' precursor material
Advanced Engineering Materials. 2002. Vol. 4, num. 10, p. 749 - 752. DOI : 10.1002/1527-2648(20021014)4:10<749::AID-ADEM749>3.0.CO;2-E.Size dependent strengthening in particle reinforced aluminium
Acta Materialia. 2002. Vol. 50, num. 1, p. 39 - 51. DOI : 10.1016/S1359-6454(01)00327-5.Effect of reaction on the tensile behavior of infiltrated boron carbide-aluminum composites
Materials Science and Engineering A. 2002. Vol. 337, num. 1-2, p. 264. DOI : 10.1016/S0921-5093(02)00039-4.2001
Heating of TEM specimens during ion milling
Ultramicroscopy. 2001. Vol. 87, num. 3, p. 123. DOI : 10.1016/S0304-3991(00)00095-4.Influence of damage on the tensile behaviour of pure aluminium reinforced with ?40 vol. pct alumina particles
Acta Materialia. 2001. Vol. 49, num. 18, p. 3699. DOI : 10.1016/S1359-6454(01)00279-8.Diffusion-limited reactive wetting: Spreading of Cu-Sn-Ti alloys on vitreous carbon
Scripta Materialia. 2001. Vol. 44, num. 11, p. 2543 - 2549. DOI : 10.1016/S1359-6462(01)00946-0.Quantification of microdamage phenomena during tensile straining of high volume fraction particle reinforced aluminum
Acta Materialia. 2001. Vol. 49, num. 3, p. 497 - 505. DOI : 10.1016/S1359-6454(00)00334-7.Thermal fatigue of single-crystalline superalloy CMSX-4: A comparison of epitaxial laser-deposited material with the base single crystal
Materials Science and Engineering A. 2001. Vol. 299, num. 1-2, p. 152. DOI : 10.1016/S0921-5093(00)01378-2.Deformation of open-cell aluminum foam
Acta Materialia. 2001. Vol. 49, num. 19, p. 3959. DOI : 10.1016/S1359-6454(01)00294-4.Reply to 'Kinetics of reactive wetting'
Scripta Materialia. 2001. Vol. 45, num. 8, p. 953. DOI : 10.1016/S1359-6462(01)01117-4.Nextel™ 610 alumina fibre reinforced aluminium: Influence of matrix and process on flow stress
Composites - Part A: Applied Science and Manufacturing. 2001. Vol. 32, num. 8, p. 1067 - 1075. DOI : 10.1016/S1359-835X(00)00178-0.Infiltration processing of fibre reinforced composites: governing phenomena
Composites Part A-Applied Science And Manufacturing. 2001. Vol. 32, num. 8, p. 981 - 996. DOI : 10.1016/S1359-835X(01)00015-X.2000
Plasticity in Chevron-notch fracture toughness testing
Engineering Fracture Mechanics. 2000. Vol. 67, num. 3, p. 263. DOI : 10.1016/S0013-7944(00)00061-8.Experimental investigation of stress and strain fields in a ductile matrix surrounding an elastic inclusion
Acta Materialia. 2000. Vol. 48, num. 7, p. 1451. DOI : 10.1016/S1359-6454(99)00444-9.Swift and inverse swift effect in alumina fiber reinforced aluminum wires
Acta Materialia. 2000. Vol. 48, num. 10, p. 2451. DOI : 10.1016/S1359-6454(00)00080-X.The effect of gravity on solution-reprecipitation during liquid phase sintering
Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science. 2000. Vol. 31, num. 2, p. 397 - 400. DOI : 10.1007/s11661-000-0276-y.Fracture strength of alumina fiber reinforced aluminum wire with and without a torsional pre-strain
Acta Materialia. 2000. Vol. 48, num. 12, p. 3235. DOI : 10.1016/S1359-6454(00)00112-9.1999
Diffusion-limited reactive wetting: Study of spreading kinetics of Cu-Cr alloys on carbon substrates
Acta Materialia. 1999. Vol. 47, num. 4, p. 1117. DOI : 10.1016/S1359-6454(99)00008-7.On the use of considere's criterion in tensile testing of materials which accumulate internal damage
Scripta Materialia. 1999. Vol. 41, num. 5, p. 549. DOI : 10.1016/S1359-6462(99)00159-1.Infiltration of fibrous preforms by a pure metal: Part V. Influence of preform compressibility
Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science. 1999. Vol. 30, num. 2, p. 471 - 482. DOI : 10.1007/s11661-999-0337-9.Strength and structure of furnace-brazed joints between aluminum and stainless steel
Welding Journal. 1999. Vol. 78, num. 5, p. 151 - s.Equilibrium shape of prismatic dislocation loops under uniform stress
Acta Materialia. 1999. Vol. 47, num. 8, p. 2357. DOI : 10.1016/S1359-6454(99)00118-4.Plasticity of continuous fiber-reinforced metals
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 1999. Vol. 30, num. 7, p. 1843 - 1866. DOI : 10.1007/s11661-999-0183-9.1998
On the work hardening of fiber reinforced copper
Scripta Materialia. 1998. Vol. 38, num. 7, p. 1109 - 1115. DOI : 10.1016/S1359-6462(98)00016-5.On thermal effects in reactive wetting
Scripta Materialia. 1998. Vol. 38, num. 9, p. 1411 - 1417. DOI : 10.1016/S1359-6462(98)00055-4.Reactive infiltration processing of aluminum-nickel intermetallic compounds
Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science. 1998. Vol. 29, num. 11, p. 2819 - 2828. DOI : 10.1007/s11661-998-0322-8.1997
Kinetics of diffusion-limited spreading of sessile drops in reactive wetting
Scripta Materialia. 1997. Vol. 36, num. 6, p. 645. DOI : 10.1016/S1359-6462(96)00431-9.Thermal expansion responses of pressure infiltrated SiC/Al metal-matrix composites
Journal of Materials Science. 1997. Vol. 32, num. 8, p. 2131. DOI : 10.1023/A:1018535108269.Functionally graded metals and metal-ceramic composites .2. Thermomechanical behaviour
International Materials Reviews. 1997. Vol. 42, num. 3, p. 85 - 116. DOI : 10.1179/imr.1997.42.3.85.Kinetic undercooling in solidification of a hypereutectic Al-Si alloy; Effect of solidifying within a ceramic preform composite
Acta Materialia. 1997. Vol. 46, num. 1, p. 91 - 99. DOI : 10.1016/S1359-6454(97)00228-0.Kinetics of densification by solution-reprecipitation
Acta Materialia. 1997. Vol. 45, num. 2, p. 749 - 758. DOI : 10.1016/S1359-6454(96)00202-9.1996
Forced unidirectional infiltration of deformable porous media
Journal of Fluid Mechanics. 1996. Vol. 311, num. -1, p. 193. DOI : 10.1017/S002211209600256X.Solidification of binary hypoeutectic alloy matrix composite castings
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 1996. Vol. 27, num. 3, p. 595 - 609. DOI : 10.1007/BF02648949.Thermal expansion of metals reinforced with ceramic particles and microcellular foams
Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science. 1996. Vol. 27, num. 11, p. 3700 - 3717. DOI : 10.1007/BF02595462.Analysis of steady-state shallow cell solidification in metal matrix composites
Acta Materialia. 1996. Vol. 44, num. 11, p. 4553 - 4564. DOI : 10.1016/1359-6454(96)00081-X.1995
MIT-ONR Workshop Covers Functionally Graded Structural Materials
MRS Bulletin. 1995. Vol. 20, num. 1, p. 54 - 55. DOI : 10.1557/S0883769400048995.Steady-state cellular solidification of Al-Cu reinforced with alumina fibers
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 1995. Vol. 26 A, num. 8, p. 2141 - 2153. DOI : 10.1007/BF02670685.Magnetic Phase-Diagram Of Mnsi
Journal Of Magnetism And Magnetic Materials. 1995. Vol. 140, p. 119 - 120. DOI : 10.1016/0304-8853(94)01115-X.Processing Of Microcellular Sic Foams .2. Ceramic Foam Production
Journal Of Materials Science. 1995. Vol. 30, num. 4, p. 1037 - 1045. DOI : 10.1007/BF01178442.Processing of microcellular SiC foams
Journal of Materials Science. 1995. Vol. 30, num. 4, p. 1025 - 1032. DOI : 10.1007/BF01178440.Processing Of Microcellular Sic Foams .1. Curing Kinetics Of Polycarbosilane In Air
Journal Of Materials Science. 1995. Vol. 30, num. 4, p. 1025 - 1032. DOI : 10.1007/BF01178440.Functionally graded metals and metal-ceramic composites .1. Processing
International Materials Reviews. 1995. Vol. 40, num. 6, p. 239 - 265. DOI : 10.1179/imr.1995.40.6.239.1994
Capillarity in isothermal infiltration of alumina fiber preforms with aluminum
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 1994. Vol. 25 A, num. 10, p. 2145 - 2152. DOI : 10.1007/BF02652315.Théorie et Pratique de l’Infiltration de Préformes par les Métaux
Revue de Métallurgie, Cahier d'Informations Techniques. 1994. Vol. 91, num. 6, p. 1232.Calorimetry of deformed aluminum reinforced with alumina particles
Scripta metallurgica et materialia. 1994. Vol. 30, num. 12, p. 1509. DOI : 10.1016/0956-716X(94)90299-2.Microsegregation In Cellular Solidification
Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science. 1994. Vol. 25, num. 10, p. 2295 - 2301. DOI : 10.1007/BF02652329.Initial-Stage Hot-Pressing Of Sic Fibre/Ti Monotapes
Composites. 1994. Vol. 25, num. 10, p. 953 - 956. DOI : 10.1016/0010-4361(94)90111-2.1993
Steady-State Solidification Of Reinforced Binary-Alloys
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 1993. Vol. 173, num. 1-2, p. 205 - 212. DOI : 10.1016/0921-5093(93)90217-3.Pressure-Infiltration Processing Of Reinforced Aluminum
Jom-Journal Of The Minerals Metals & Materials Society. 1993. Vol. 45, num. 1, p. 36 - 43. DOI : 10.1007/BF03223364.Synthesis Of Bulk And Reinforced Nickel Aluminides By Reactive Infiltration
Metallurgical Transactions A-Physical Metallurgy And Materials Science. 1993. Vol. 24, num. 10, p. 2161 - 2170. DOI : 10.1007/BF02648590.Status of metal-matrix composite research and development in Japan
JOM. 1993. Vol. 45, num. 3, p. 10 - 18. DOI : 10.1007/BF03222342.Researching Metal-Matrix Composites At Mits Department Of Materials Science And Engineering
Jom-Journal Of The Minerals Metals & Materials Society. 1993. Vol. 45, num. 1, p. 62 - 63. DOI : 10.1007/BF03223371.Initial-Stage Hot-Pressing Of Monosized Ti And 90-Percent Ti-10-Percent Tic Powders
Acta Metallurgica Et Materialia. 1993. Vol. 41, num. 3, p. 955 - 965. DOI : 10.1016/0956-7151(93)90030-V.1992
Infiltration of fibrous preforms by a pure metal: Part IV. Morphological stability of the remelting front
Metallurgical Transactions A-Physical Metallurgy And Materials Science. 1992. Vol. 23, num. 8, p. 2291 - 2299. DOI : 10.1007/BF02646022.Infiltration of fiber preforms by a binary alloy: Part II. Further theory and experiments
Metallurgical transactions. A, Physical metallurgy and materials science. 1992. Vol. 23, num. 8, p. 2263 - 2280. DOI : 10.1007/BF02646020.Structure And Room-Temperature Deformation Of Alumina Fiber-Reinforced Aluminum
Metallurgical Transactions A-Physical Metallurgy And Materials Science. 1992. Vol. 23, num. 4, p. 1207 - 1219. DOI : 10.1007/BF02665052.Solidification Processing Of Metal Matrix Composites
International Materials Reviews. 1992. Vol. 37, num. 3, p. 101 - 128. DOI : 10.1179/imr.1992.37.1.101.Infiltration of fiber preforms by an alloy: Part III. Die casting experiments
Metallurgical transactions. A, Physical metallurgy and materials science. 1992. Vol. 23, num. 8, p. 2281 - 2289. DOI : 10.1007/BF02646021.Wetting of SAFFIL alumina fiber preforms by aluminum at 973 K
Metallurgical transactions. A, Physical metallurgy and materials science. 1992. Vol. 23, num. 7, p. 2071 - 2073. DOI : 10.1007/BF02647554.1991
Chemical stability of zirconia-stabilized alumina fibers during pressure infiltration by aluminum
Metallurgical transactions. A, Physical metallurgy and materials science. 1991. Vol. 22, num. 12, p. 2855 - 2862. DOI : 10.1007/BF02650246.Relaxed configuration of a row of punched prismatic dislocation loops
Scripta metallurgica et materialia. 1991. Vol. 25, num. 3, p. 607.Lorentz Force Infiltration Of Fibrous Preforms
Metallurgical Transactions A-Physical Metallurgy And Materials Science. 1991. Vol. 22, num. 12, p. 2903 - 2915. DOI : 10.1007/BF02650251.Dislocation emission at fibers. I. Theory of longitudinal punching by thermal stresses
Acta metallurgica et materialia. 1991. Vol. 39, num. 7, p. 1405 - 1416. DOI : 10.1016/0956-7151(91)90226-Q.Dislocation emission at fibers. II. Experiments and microstructure of thermal punching
Acta metallurgica et materialia. 1991. Vol. 39, num. 7, p. 1417 - 1429. DOI : 10.1016/0956-7151(91)90227-R.Thermal mismatch dislocations produced by large particles in a strain-hardening matrix
Materials Science and Engineering A. 1991. Vol. A135, num. 1-2, p. 179. DOI : 10.1016/0921-5093(91)90557-4.On the relaxation of a mismatching spheroid by prismatic loop punching
Scripta metallurgica et materialia. 1991. Vol. 25, num. 4, p. 761.On the rate of dendrite arm coarsening
Metallurgical transactions. A, Physical metallurgy and materials science. 1991. Vol. 22, num. 2, p. 569 - 574. DOI : 10.1007/BF02656824.On plastic relaxation of thermal stresses in reinforced metals
Acta metallurgica et materialia. 1991. Vol. 39, num. 2, p. 127 - 139. DOI : 10.1016/0956-7151(91)90261-X.Interfacial phenomena in the solidification processing of metal matrix composites
Materials Science and Engineering A. 1991. Vol. A135, num. 1-2, p. 1. DOI : 10.1016/0921-5093(91)90527-T.Reinforced silver chloride as a model material for the study of dislocations in metal matrix composites
Materials Science and Engineering A. 1991. Vol. A144, num. 1-2, p. 179. DOI : 10.1016/0921-5093(91)90224-B.Interface structure in infiltrated composites of aluminum reinforced with alumina-silica fiber preforms
Metallurgical transactions. A, Physical metallurgy and materials science. 1991. Vol. 22, num. 5, p. 1126 - 1128. DOI : 10.1007/BF02661109.Lorentz-Force-Driven Infiltration By Aluminum
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 1991. Vol. 144, p. 165 - 168. DOI : 10.1016/0921-5093(91)90222-9.Correction
Metallurgical Transactions A-Physical Metallurgy And Materials Science. 1991. Vol. 22, num. 6, p. 1466 - 1466. DOI : 10.1007/BF02660679.Fabrication Of Cast Particle-Reinforced Metals Via Pressure Infiltration
Journal Of Materials Science. 1991. Vol. 26, num. 9, p. 2519 - 2526. DOI : 10.1007/BF01130205.Particle Matrix Bonding In Alumina-Steel Composites
Scripta Metallurgica Et Materialia. 1991. Vol. 25, num. 8, p. 1917 - 1920. DOI : 10.1016/0956-716X(91)90328-X.1990
Corrigenda And Comments On The Infiltration Of Fiber Preforms
Metallurgical Transactions A-Physical Metallurgy And Materials Science. 1990. Vol. 21, num. 8, p. 2287 - 2287. DOI : 10.1007/BF02647893.Proposal for a Generic Materials Processing Course
MRS Bulletin. 1990. Vol. 15, p. 35 - 36. DOI : 10.1557/S0883769400058929.Infiltration of fiber preforms by a binary alloy: Part I. Theory
Metallurgical transactions. A, Physical metallurgy and materials science. 1990. Vol. 21, num. 7, p. 2059 - 2072. DOI : 10.1007/BF02647253.Infiltration of fibrous preforms by a pure metal: part III. Capillary phenomena
Metallurgical transactions. A, Physical metallurgy and materials science. 1990. Vol. 21, num. 8, p. 2257 - 2263. DOI : 10.1007/BF02647888.1989
Infiltration of fibrous preforms by a pure metal. Part II. Experiment
Metallurgical transactions. A, Physical metallurgy and materials science. 1989. Vol. 20, num. 11, p. 2549 - 2557. DOI : 10.1007/BF02666689.Inorganic Composite Materials in Japan - Status and Trends
Scientific Bulletin, Office of Naval Research. 1989.Infiltration of fibrous preforms by a pure metal. Part I. Theory
Metallurgical transactions. A, Physical metallurgy and materials science. 1989. Vol. 20, num. 11, p. 2535 - 2547. DOI : 10.1007/BF02666688.Solidification processing of metal-matrix composites
Materials and Design. 1989. Vol. 10, num. 2, p. 68.On the influence of coarsening on microsegregation
Metallurgical transactions. A, Physical metallurgy and materials science. 1989. Vol. 20, num. 2, p. 247 - 253. DOI : 10.1007/BF02670250.1988
Columnar Dendritic Solidification In A Metal-Matrix Composite
Metallurgical Transactions A-Physical Metallurgy And Materials Science. 1988. Vol. 19, num. 3, p. 709 - 721. DOI : 10.1007/BF02649285.Solidification Processing of Metal-Matrix Composites
Journal of Metals. 1988. Vol. 40, num. 2, p. 12 - 19. DOI : 10.1007/BF03258826.Fundamental aspects of solidification processing of metal matrix composites by pressure infiltration techniques
Israel Journal of Technology. 1988. Vol. 24, num. 3 -4,Pt B, p. 359.1987
Solidification of Infiltrated Metal Matrix Composites
Metallurgical Science and Technology. 1987. Vol. 5, p. 3 - 10.On the infiltration of metal matrix composites
Metallurgical transactions. A, Physical metallurgy and materials science. 1987. Vol. 18, num. 6, p. 1160 - 1163. DOI : 10.1007/BF02668570.1986
Alloy Microstructures of Cast Metal Matrix Composites
Journal of Metals. 1986. Vol. 38, p. 30 - 35. DOI : 10.1007/BF03257892.PROCESSING OF METAL AND CERAMIC MATRIX COMPOSITE
American Ceramic Society Bulletin. 1986. Vol. 65, num. 2, p. 293.Infoscience
2023
On the slip burst amplitude cutoff in dislocation-rich microcrystals
Acta Materialia. 2023. Vol. 264, p. 119582. DOI : 10.1016/j.actamat.2023.119582.Room-temperature strength of the interfacial bond between silica inclusions and iron
Acta Materialia. 2023. Vol. 263, p. 119502. DOI : 10.1016/j.actamat.2023.119502.Phase Transformation-Induced Interfacial Debonding of Silica Inclusions in Iron
Metallurgical And Materials Transactions B-Process Metallurgy And Materials Processing Science. 2023. Vol. 55, num. 1, p. 1 - 7. DOI : 10.1007/s11663-023-02939-6.Intermittent tensile deformation of silver microcastings: Influence of the strain rate
Scripta Materialia. 2023. Vol. 239, p. 115820. DOI : 10.1016/j.scriptamat.2023.115820.The effect of size, orientation and temperature on the deformation of microcast silver crystals
Acta Materialia. 2023. Vol. 249, p. 118817. DOI : 10.1016/j.actamat.2023.118817.Nanoindentation of embedded particles
Journal Of Materials Research. 2023. DOI : 10.1557/s43578-023-00920-2.2022
Coupling silicon lithography with metal casting
Applied Materials Today. 2022. Vol. 29, p. 101647. DOI : 10.1016/j.apmt.2022.101647.On the bulk compressibility of close-packed particles and their composites
Composites Part A-Applied Science And Manufacturing. 2022. Vol. 161, p. 107106. DOI : 10.1016/j.compositesa.2022.107106.The thermally activated deformation behaviour of single-crystalline microcast aluminium wires
Acta Materialia. 2022. Vol. 234, p. 118037. DOI : 10.1016/j.actamat.2022.118037.A method for cleaning flat punch diamond microprobe tips
Micron. 2022. Vol. 155, p. 103217. DOI : 10.1016/j.micron.2022.103217.Investment casting of periodic aluminum cellular structures using slurry-cast table salt moulds
Materials & Design. 2022. Vol. 215, p. 110488. DOI : 10.1016/j.matdes.2022.110488.Strong silicon oxide inclusions in iron
Acta Materialia. 2022. Vol. 242, p. 118437. DOI : 10.1016/j.actamat.2022.118437.2021
Surface energy contributions to the work of infiltration in metal matrix composite processing
Scripta Materialia. 2021. Vol. 206, p. 114223. DOI : 10.1016/j.scriptamat.2021.114223.3D metal freeform micromanufacturing
Journal of Manufacturing Processes. 2021. Vol. 68, p. 867 - 876. DOI : 10.1016/j.jmapro.2021.06.002.Simulating Infiltration as a Sequence of Pinning and De-pinning Processes
Acta Materialia. 2021. Vol. 210, p. 116831. DOI : 10.1016/j.actamat.2021.116831.Finite element simulation of the Portevin-Le Chatelier effect in highly reinforced metal matrix composites
Philosophical Magazine. 2021. Vol. 101, num. 12, p. 1471 - 1489. DOI : 10.1080/14786435.2021.1919331.Processing and micro-mechanical characterization of multi-component transition MC carbides in iron
Journal of the European Ceramic Society. 2021. Vol. 41, num. 7, p. 3937 - 3946. DOI : 10.1016/j.jeurceramsoc.2021.02.044.2020
Mechanical properties and cytocompatibility of dense and porous Zn produced by laser powder bed fusion for biodegradable implant applications
Acta Biomaterialia. 2020. Vol. 110, p. 289 - 302. DOI : 10.1016/j.actbio.2020.04.006.Kinetic processes in the high-temperature pressure-infiltration of Al into Al2O3
Acta Materialia. 2020. Vol. 189, p. 105 - 117. DOI : 10.1016/j.actamat.2020.02.048.2019
Mechanical properties of replicated cellular Zn and Zn1.5Mg in uniaxial compression
Materials Characterization. 2019. Vol. 157, p. 109895. DOI : 10.1016/j.matchar.2019.109895.Laue microdiffraction characterisation of as-cast and tensile deformed Al microwires
Philosophical Magazine. 2019. p. 185503. DOI : 10.1080/14786435.2019.1605220.The effect of size on the plastic deformation of annealed cast aluminium microwires
Scripta Materialia. 2019. Vol. 161, p. 58 - 61. DOI : 10.1016/j.scriptamat.2018.10.009.2018
Stress relaxation in the presence of sudden strain bursts: Methodology and stress relaxation data of microcast aluminium microwires
Data In Brief. 2018. Vol. 21, p. 2134 - 2141. DOI : 10.1016/j.dib.2018.11.047.On the diametric compression strength test of brittle spherical particles
European Journal Of Mechanics A-Solids. 2018. Vol. 72, p. 148 - 154. DOI : 10.1016/j.euromechsol.2018.04.016.Meridian crack test strength of plasma-sprayed amorphous and nanocrystalline ceramic microparticles
ACTA MATERIALIA. 2018. Vol. 145, p. 278 - 289. DOI : 10.1016/j.actamat.2017.12.031.In-situ strength of individual silicon particles within an aluminium casting alloy
Acta Materialia. 2018. Vol. 143, p. 67 - 76. DOI : 10.1016/j.actamat.2017.09.058.2017
Compression testing spherical particles for strength: Theory of the meridian crack test and implementation for microscopic fused quartz
Journal Of The Mechanics And Physics Of Solids. 2017. Vol. 99, p. 70 - 92. DOI : 10.1016/j.jmps.2016.11.009.Stable room-temperature micron-scale crack growth in single-crystalline silicon
Journal Of Materials Research. 2017. Vol. 32, num. 19, p. 3617 - 3626. DOI : 10.1557/jmr.2017.238.Fluid flow through replicated microcellular materials in the Darcy-Forchheimer regime
Acta Materialia. 2017. Vol. 126, p. 280 - 293. DOI : 10.1016/j.actamat.2016.12.067.Silicon particle pinhole defects in aluminium–silicon alloys
Journal of Materials Science. 2017. Vol. 52, num. 2, p. 858 - 868. DOI : 10.1007/s10853-016-0381-y.The local strength of individual alumina particles
Journal Of The Mechanics And Physics Of Solids. 2017. Vol. 109, p. 34 - 49. DOI : 10.1016/j.jmps.2017.08.005.Occurrence of the Portevin Le-Chatelier effect in open-cell microcellular Al-2 wt% Mg
Scripta Materialia. 2017. Vol. 132, p. 13 - 16. DOI : 10.1016/j.scriptamat.2017.01.020.Cast aluminium single crystals cross the threshold from bulk to size-dependent stochastic plasticity
Nature Materials. 2017. Vol. 16, p. 730 - 736. DOI : 10.1038/nmat4911.2016
Effect of hydrostatic pressure on flow and deformation in highly reinforced particulate composites
Acta Materialia. 2016. Vol. 117, p. 345 - 355. DOI : 10.1016/j.actamat.2016.06.052.Microscopic strength of silicon particles in an aluminium–silicon alloy
Acta Materialia. 2016. Vol. 105, p. 165 - 175. DOI : 10.1016/j.actamat.2015.12.006.Fracture toughness measurement in fused quartz using triangular chevron-notched micro-cantilevers
Scripta Materialia. 2016. Vol. 112, p. 132 - 135. DOI : 10.1016/j.scriptamat.2015.09.032.2015
Fracture toughness testing of nanocrystalline alumina and fused quartz using chevron-notched microbeams
Acta Materialia. 2015. Vol. 86, p. 385 - 395. DOI : 10.1016/j.actamat.2014.12.016.The local strength of microscopic alumina reinforcements
Acta Materialia. 2015. Vol. 100, p. 215 - 223. DOI : 10.1016/j.actamat.2015.08.026.Influence of the wetting angle on capillary forces in pressure infiltration
Acta Materialia. 2015. Vol. 91, p. 57 - 69. DOI : 10.1016/j.actamat.2015.03.002.On measuring fracture toughness under load control in the presence of slow crack growth
Journal Of The European Ceramic Society. 2015. Vol. 35, num. 11, p. 3155 - 3166. DOI : 10.1016/j.jeurceramsoc.2015.04.004.Designing laminated metal composites for tensile ductility
Materials & Design. 2015. Vol. 66, p. 412 - 420. DOI : 10.1016/j.matdes.2014.08.061.2014
Percolation and Universal Scaling in Composite Infiltration Processing
Materials Research Letters. 2014. Vol. 3, num. 1, p. 7 - 15. DOI : 10.1080/21663831.2014.948692.Influence of microstructural heterogeneity on the scaling between flow stress and relative density in microcellular Al-4.5 %Cu
Journal Of Materials Science. 2014. Vol. 49, num. 6, p. 2403 - 2414. DOI : 10.1007/s10853-013-7852-1.Tensile elongation of unidirectional or laminated composites combining a brittle reinforcement with a ductile strain and strain-rate hardening matrix
Acta Materialia. 2014. Vol. 71, p. 31 - 43. DOI : 10.1016/j.actamat.2014.02.043.Infiltration of tin bronze into alumina particle beds: influence of alloy chemistry on drainage curves
Journal Of Materials Science. 2014. Vol. 49, num. 22, p. 7669 - 7678. DOI : 10.1007/s10853-014-8475-x.Infiltrated Cu8Al-Ti alumina composites
Composites Part A-Applied Science And Manufacturing. 2014. Vol. 66, p. 1 - 15. DOI : 10.1016/j.compositesa.2014.06.019.2013
Scaling of conductivity and Young’s modulus in replicated microcellular materials
Journal of Materials Science. 2013. Vol. 48, p. 8140 - 8146. DOI : 10.1007/s10853-013-7626-9.On the load-bearing efficiency of open-cell foams: A comparison of two architectures related to two processes
Scripta Materialia. 2013. Vol. 68, num. 1, p. 44 - 49. DOI : 10.1016/j.scriptamat.2012.05.048.The plasticity size effect in replicated microcellular aluminium
Scripta Materialia. 2013. Vol. 69, num. 6, p. 469 - 472. DOI : 10.1016/j.scriptamat.2013.05.044.In situ copper–alumina composites
Materials Science and Engineering: A. 2013. Vol. 585, p. 396 - 407. DOI : 10.1016/j.msea.2013.07.074.Influence of quench rate and microstructure on bendability of AA6016 aluminum alloys
Materials Science and Engineering: A. 2013. Vol. 559, p. 558 - 565. DOI : 10.1016/j.msea.2012.08.141.2012
An analysis of the tensile elongation to failure of laminated metal composites in the presence of strain-rate hardening
Acta Materialia. 2012. Vol. 60, num. 5, p. 2265 - 2276. DOI : 10.1016/j.actamat.2011.12.041.Al2O3 particle rounding in molten copper and Cu8wt%Al
Journal Of Materials Science. 2012. Vol. 47, p. 6346 - 6353. DOI : 10.1007/s10853-012-6559-z.Capillarity in pressure infiltration: improvements in characterization of high-temperature systems
Journal of Materials Science. 2012. Vol. 47, num. 24, p. 8419 - 8430. DOI : 10.1007/s10853-012-6645-2.On measuring wettability in infiltration processing (vol 56, pg 859, 2007)
Scripta Materialia. 2012. Vol. 67, num. 5, p. 519 - 520. DOI : 10.1016/j.scriptamat.2012.06.001.Fracture of convoluted and lamellar α2 + γ TiAl alloys
Intermetallics. 2012. Vol. 22, p. 176 - 188. DOI : 10.1016/j.intermet.2011.11.001.Tensile strength of axially loaded unidirectional Nextel 610 (TM) reinforced aluminium: A case study in local load sharing between randomly distributed fibres
Composites Part A-Applied Science And Manufacturing. 2012. Vol. 43, p. 129 - 137. DOI : 10.1016/j.compositesa.2011.09.027.2011
Creep of replicated microcellular aluminium
Acta Materialia. 2011. Vol. 59, num. 2, p. 440 - 450. DOI : 10.1016/j.actamat.2010.09.037.Fatigue and cyclic creep of replicated microcellular aluminium
Materials Science and Engineering: A. 2011. Vol. 528, num. 6, p. 2657 - 2663. DOI : 10.1016/j.msea.2010.12.007.On measured activation volumes as relevant to ratcheting or cyclic creep
Scripta Materialia. 2011. Vol. 65, num. 9, p. 787 - 790. DOI : 10.1016/j.scriptamat.2011.07.032.Thermally activated deformation of two- and three-variant nanotwinned L10 Au–Cu–Pt
Intermetallics. 2011. Vol. 19, num. 7, p. 988 - 996. DOI : 10.1016/j.intermet.2011.03.002.Hole and notch sensitivity of aluminium replicated foam
Acta Materialia. 2011. Vol. 59, num. 2, p. 572 - 581. DOI : 10.1016/j.actamat.2010.09.061.L10 nanotwinned gold-rich Au–Cu–Pt
Acta Materialia. 2011. Vol. 59, num. 8, p. 3184 - 3195. DOI : 10.1016/j.actamat.2011.01.058.Laminated Metal Composites by Infiltration
Metallurgical and Materials Transactions A. 2011. Vol. 42, num. 11, p. 3509 - 3520. DOI : 10.1007/s11661-011-0756-2.Multiaxial yield behaviour of Al replicated foam
Journal of the Mechanics and Physics of Solids. 2011. Vol. 59, num. 9, p. 1777 - 1793. DOI : 10.1016/j.jmps.2011.05.015.Activation volume in microcellular aluminium: Size effects in thermally activated plastic flow
Acta Materialia. 2011. Vol. 59, num. 18, p. 6869 - 6879. DOI : 10.1016/j.actamat.2011.07.021.Solid state transformations of Au-Cu-Pt alloys studied by in-situ X-ray synchrotron radiation and DSC
Intermetallics. 2011. Vol. 19, num. 5, p. 726 - 737. DOI : 10.1016/j.intermet.2011.01.014.Thermal conductivity and interfacial conductance of AlN particle reinforced metal matrix composites
Journal of Applied Physics. 2011. Vol. 109, num. 6, p. 064907. DOI : 10.1063/1.3553870.2010
Fracture toughness of Al replicated foam
Acta Materialia. 2010. Vol. 58, num. 14, p. 4590 - 4603. DOI : 10.1016/j.actamat.2010.04.025.A collection of papers on Materials Science to celebrate the 80th birthday of Professor Anthony Kelly, CBE, FRS
Philosophical Magazine. 2010. Vol. 90, num. 31, p. 4075 - 4080. DOI : 10.1080/14786435.2010.520835.Influence of chemistry and microstructure on the activation volume of TiAl alloys
Intermetallics. 2010. Vol. 18, num. 11, p. 2145 - 2153. DOI : 10.1016/j.intermet.2010.06.022.Preface to the viewpoint set: Triple lines
Scripta Materialia. 2010. Vol. 62, num. 12, p. 887 - 888. DOI : 10.1016/j.scriptamat.2010.03.018.Fracture of high volume fraction ceramic particle reinforced aluminium under multiaxial stress
Acta Materialia. 2010. Vol. 58, num. 11, p. 3895 - 3907. DOI : 10.1016/j.actamat.2010.03.037.Solidification of Al-4.5 wt pct Cu-Replicated Foams
Metallurgical and Materials Transactions A. 2010. Vol. 41, num. 8, p. 2048 - 2055. DOI : 10.1007/s11661-010-0297-0.Metal Matrix Composites
Annual Review of Materials Research. 2010. Vol. 40, num. 1, p. 243 - 270. DOI : 10.1146/annurev-matsci-070909-104511.Measurement and anisotropy of grain boundary energy in Cu-1 wt.% PB
Scripta Materialia. 2010. Vol. 62, p. 262 - 265. DOI : 10.1016/j.scriptamat.2009.11.012.Yield surface of polyurethane and aluminium replicated foam
Acta Materialia. 2010. Vol. 58, num. 15, p. 5168 - 5183. DOI : 10.1016/j.actamat.2010.05.053.Influence of reinforcement contiguity on the thermal expansion of alumina particle reinforced aluminium composites
International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde). 2010. Vol. 101, num. 09, p. 1113 - 1120. DOI : 10.3139/146.110388.Improvement of elevated temperature mechanical properties of Cu–Ni–Sn–Pb alloys
Materials Science and Engineering: A. 2010. Vol. 527, num. 16-17, p. 4326 - 4333. DOI : 10.1016/j.msea.2010.03.056.Materials science: Pleated crystals
Nature. 2010. Vol. 468, num. 7326, p. 906 - 907. DOI : 10.1038/468906a.2009
Intermediate temperature embrittlement of copper alloys
International Materials Reviews. 2009. Vol. 54, num. 2, p. 94 - 116. DOI : 10.1179/174328009X392967.Particle fracture in high volume fraction ceramic reinforced metals: governing parameters and implications for composite failure
Journal of the Mechanics and Physics of Solids. 2009. Vol. 57, num. 11, p. 1781 - 1800. DOI : 10.1016/j.jmps.2009.08.005.Dihedral Angles in Cu-1wt.%Pb: Grain Boundary Energy and Grain Boundary Triple Line Effects
Acta Materialia. 2009. Vol. 57, num. 8, p. 2527 - 2537. DOI : 10.1016/j.actamat.2009.02.009.Surface oxide in replicated microcellular aluminium and its influence on the plasticity size effect
Acta Materialia. 2009. Vol. 57, p. 286 - 294. DOI : 10.1016/j.actamat.2008.09.008.Processing of Ag-Cu alloy foam by the replication process
Scripta Materialia. 2009. Vol. 61, p. 351 - 354. DOI : 10.1016/j.scriptamat.2009.04.024.Young's modulus of ceramic particle reinforced aluminium: measurement by the Impulse Excitation Technique and confrontation with analytical models
Composites Part A. 2009. Vol. 40, p. 524 - 529. DOI : 10.1016/j.compositesa.2009.02.001.Ductile-to-brittle transition in tensile failure of particle reinforced metals
Journal of the Mechanics and Physics of Solids. 2009. Vol. 57, p. 473 - 499. DOI : 10.1016/j.jmps.2008.11.006.In situ flow stress of pure aluminium constrained by tightly packed alumina fibres
Acta Materialia. 2009. Vol. 57, num. 6, p. 1795 - 1812. DOI : 10.1016/j.actamat.2008.12.024.Creep of aluminium-magnesium open cell foam
Acta Materialia. 2009. Vol. 57, p. 830 - 837. DOI : 10.1016/j.actamat.2008.10.019.Microstructure, Strength and Creep of Aluminium-nickel Open Cell Foam
Philosophical Magazine. 2009. Vol. 89, num. 13, p. 1121 - 1139. DOI : 10.1080/14786430902915396.2008
Age-hardening Response of Replicated Microcellular Al-4.5%Cu
Advanced Engineering Materials. 2008. Vol. 10, num. 9, p. 849 - 852. DOI : 10.1002/adem.200800086.High-temperature wettability of aluminum nitride during liquid metal infiltration
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2008. Vol. 495, num. 1-2, p. 197 - 202. DOI : 10.1016/j.msea.2007.12.050.Direct measurement of drainage curves in infiltration of SiC particle preforms: influence of interfacial reactivity
Journal Of Materials Science. 2008. Vol. 43, num. 15, p. 5061 - 5067. DOI : 10.1007/s10853-008-2670-6.Thermal conductivity of Al-SiC composites with monomodal and bimodal particle size distribution
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2008. Vol. 480, num. 1-2, p. 483 - 488. DOI : 10.1016/j.msea.2007.07.026.Coordination measurements in compacted NaCl irregular powders using X-ray microtomography
Journal Of The European Ceramic Society. 2008. Vol. 28, num. 13, p. 2441 - 2449. DOI : 10.1016/j.jeurceramsoc.2008.03.041.Equilibrium shape of a liquid intergranular inclusion in a stressed elastic solid
Scripta Materialia. 2008. Vol. 58, num. 7, p. 610 - 613. DOI : 10.1016/j.scriptamat.2007.11.024.Measurement of damage evolution in continuous ceramic fibre-reinforced metals by acoustic emission
Scripta Materialia. 2008. Vol. 59, num. 8, p. 842 - 845. DOI : 10.1016/j.scriptamat.2008.06.027.Tensile flow stress of ceramic particle-reinforced metal in the presence of particle cracking
Acta Materialia. 2008. Vol. 56, num. 16, p. 4402 - 4416. DOI : 10.1016/j.actamat.2008.05.004.Fifth International Conference on High Temperature Capillarity HTC-2007, Alicante, Spain Preface
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2008. Vol. 495, num. 1-2, p. 1 - 2. DOI : 10.1016/j.msea.2008.05.011.Fracture behavior of low-density replicated aluminum alloy foams
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2008. Vol. 496, num. 1-2, p. 376 - 382. DOI : 10.1016/j.msea.2008.05.036.Direct measurement of drainage curves in infiltration of SiC particle preforms
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2008. Vol. 495, num. 1-2, p. 203 - 207. DOI : 10.1016/j.msea.2008.01.074.2007
Microcellular aluminium? Child's play!
Advanced Engineering Materials. 2007. Vol. 9, num. 11, p. 951 - 954. DOI : 10.1002/adem.200700190.Diffusion-limited reactive wetting: effect of interfacial reaction behind the advancing triple line
Journal of Materials Science. 2007. Vol. 42, num. 19, p. 8071 - 8082. DOI : 10.1007/s10853-007-1915-0.On the steady-state creep of microcellular metals
Scripta Materialia. 2007. Vol. 57, num. 1, p. 33 - 36. DOI : 10.1016/j.scriptamat.2007.03.013.Spherical pore replicated Microcellular Aluminium
Materials Science and Engineering A. 2007. Vol. 465, num. 1-2, p. 124 - 135. DOI : 10.1016/j.msea.2007.02.002.Infiltration of graphite preforms with Al-Si eutectic alloy and mercury
Scripta Materialia. 2007. Vol. 56, num. 11, p. 991. DOI : 10.1016/j.scriptamat.2007.01.042.Influence of the infiltration pressure on the structure and properties of replicated aluminium foams
Materials Science and Engineering A. 2007. Vol. 462, num. 1-2, p. 68 - 75. DOI : 10.1016/j.msea.2006.03.157.On measuring wettability in infiltration processing
Scripta Materialia. 2007. Vol. 56, num. 10, p. 859 - 862. DOI : 10.1016/j.scriptamat.2007.02.002.2006
Replication processing of highly porous materials
ADVANCED ENGINEERING MATERIALS. 2006. Vol. 8, num. 9, p. 795 - 803. DOI : 10.1002/adem.200600077.Capillary shape equilibration of liquid inclusions embedded in a partly soluble solid
Scripta Materialia. 2006. Vol. 55, num. 10, p. 955. DOI : 10.1016/j.scriptamat.2006.06.036.Functional grading of metal foam cores for yield-limited lightweight sandwich beams
Scripta Materialia. 2006. Vol. 54, num. 4 SPEC. ISS., p. 539. DOI : 10.1016/j.scriptamat.2005.10.050.The electrical conductivity of microcellular metals
Journal Of Applied Physics. 2006. Vol. 100, num. 4, p. 044912. DOI : 10.1063/1.2335672.Uniaxial deformation of microcellular metals
Acta Materialia. 2006. Vol. 54, num. 16, p. 4129. DOI : 10.1016/j.actamat.2006.03.054.Increasing the strength/toughness combination of high volume fraction particulate metal matrixComposites using an Al-Ag matrix alloy
Advanced Engineering Materials. 2006. Vol. 8, num. 1-2, p. 56. DOI : 10.1002/adem.200500185.Simplified prediction of the monotonic uniaxial stress-strain curve of non-linear particulate composites
Acta Materialia. 2006. Vol. 54, num. 8, p. 2145. DOI : 10.1016/j.actamat.2006.01.002.Reactivity and thermal behaviour ofCu-Si/SiC composites: effects of SiC oxidation
Materials Science and Technology. 2006. Vol. 22, num. 12, p. 1464 - 1468. DOI : 10.1179/174328406X131000.The effect of preform processing on replicated aluminium foam structure and mechanical properties
Scripta Materialia. 2006. Vol. 54, num. 12, p. 2069. DOI : 10.1016/j.scriptamat.2006.03.003.Sintering of NaCl powder: Mechanisms and first stage kinetics
Journal Of The European Ceramic Society. 2006. Vol. 26, num. 16, p. 3487 - 3497. DOI : 10.1016/j.jeurceramsoc.2005.12.020.2005
A stereoscopic method for dihedral angle measurement
Journal of Materials Science. 2005. Vol. 40, num. 12, p. 3121. DOI : 10.1007/s10853-005-2673-5.Measuring and tailoring capillary forces during liquid metal infiltration
Current Opinion In Solid State & Materials Science. 2005. Vol. 9, num. 4-5, p. 196 - 201. DOI : 10.1016/j.cossms.2006.02.007.Ductility of Saffil(TM) short fibre reinforced metals
Scripta Materialia. 2005. Vol. 53, num. 1, p. 17 - 21. DOI : 10.1016/j.scriptamat.2005.03.027.Graded open-cell aluminium foam core sandwich beams
Materials Science and Engineering A. 2005. Vol. 404, num. 1-2, p. 9. DOI : 10.1016/j.msea.2005.05.096.Damage accumulation during cyclic loading of a continuous alumina fibre reinforced aluminium composite
Scripta Materialia. 2005. Vol. 53, num. 10, p. 1111 - 1115. DOI : 10.1016/j.scriptamat.2005.07.024.Damage evolution in Saffil alumina short-fibre reinforced aluminium during tensile testing
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2005. Vol. 395, num. 1-2, p. 27 - 34. DOI : 10.1016/j.msea.2004.12.009.Permeability of open-pore microcellular materials
Acta Materialia. 2005. Vol. 53, num. 5, p. 1381. DOI : 10.1016/j.actamat.2004.11.031.Longitudinal deformation of fibre reinforced metals: Influence of fibre distribution on stiffness and flow stress
Mechanics of Materials. 2005. Vol. 37, num. 1-17, p. 1. DOI : 10.1016/j.mechmat.2003.12.001.Wetting in infiltration of alumina particle preforms with molten copper
Journal Of Materials Science. 2005. Vol. 40, num. 9-10, p. 2487 - 2491. DOI : 10.1007/s10853-005-1980-1.2004
Particle reinforced metals of high ceramic content
Materials Science and Engineering A. 2004. Vol. 387-389, num. 1-2 SPEC. ISS., p. 822. DOI : 10.1016/j.msea.2004.05.054.Damage evolution of Nextel 610? alumina fibre reinforced aluminium
Acta Materialia. 2004. Vol. 52, num. 3, p. 573. DOI : 10.1016/j.actamat.2003.09.040.Fracture of aluminium reinforced with densely packed ceramic particles: influence of matrix hardening
Acta Materialia. 2004. Vol. 52, num. 18, p. 5331 - 5345. DOI : 10.1016/j.actamat.2004.07.038.Fracture of aluminium reinforced with densely packed ceramic particles: Link between the local and the total work of fracture
Acta Materialia. 2004. Vol. 52, num. 5, p. 1337 - 1351. DOI : 10.1016/j.actamat.2003.11.019.Wetting, interfacial interactions and sticking in glass/steel systems
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2004. Vol. 384, num. 1-2, p. 117 - 128. DOI : 10.1016/j.msea.2004.05.045.Tensile behavior of replicated aluminium foams
Advanced Engineering Materials. 2004. Vol. 6, num. 6, p. 444. DOI : 10.1002/adem.200405155.Processing of NaCI powders of controlled size and shape for the microstructural tailoring of aluminium foams
Materials Science and Engineering A. 2004. Vol. 374, num. 1-2, p. 250. DOI : 10.1016/j.msea.2004.03.015.Investigation of crack-tip plasticity in high volume fraction particulate metal matrix composites
Engineering Fracture Mechanics. 2004. Vol. 71, num. 16-17, p. 2385. DOI : 10.1016/j.engfracmech.2004.01.006.Uniaxial deformation of open-cell aluminum foam: The role of internal damage
Acta Materialia. 2004. Vol. 52, num. 10, p. 2895 - 2902. DOI : 10.1016/j.actamat.2004.02.035.2003
On the electrical conductivity of metal matrix composites containing high volume fractions of non-conducting inclusions
Acta Materialia. 2003. Vol. 51, num. 11, p. 3199 - 3211. DOI : 10.1016/S1359-6454(03)00141-1.Corrigendum on the tensile behaviour of infiltrated alumina particle reinforced aluminium composites
Acta Materialia. 2003. Vol. 51, num. 20, p. 6493. DOI : 10.1016/S1359-6454(03)00431-2.On the influence of the shape of randomly oriented, nonconducting inclusions in a conducting matrix on the effective electrical conductivity
Acta Materialia. 2003. Vol. 51, num. 2, p. 495 - 505. DOI : 10.1016/S1359-6454(02)00432-9.Geometrically necessary dislocations and strain-gradient plasticity: A few critical issues
Scripta Materialia. 2003. Vol. 48, num. 2, p. 119. DOI : 10.1016/S1359-6462(02)00335-4.The influence of non-linear elasticity on the determination of Weibull parameters using the fibre bundle tensile test
Composites Part A: Applied Science and Manufacturing. 2003. Vol. 34, num. 9, p. 907. DOI : 10.1016/S1359-835X(03)00134-9.Transmitted light microscopy of a fibre reinforced metal
Journal of Microscopy. 2003. Vol. 209, num. 1, p. 8 - 12. DOI : 10.1046/j.1365-2818.2003.01097.x.Erratum: Influence of heat treatment and particle shape on mechanical properties of infiltrated Al2O3 particle reinforced Al-2 wt-% Cu (Materials Science and Technology, (December 2002) 18 (1461-1470))
Materials Science and Technology. 2003. Vol. 19, num. 4, p. 549 - 550. DOI : 10.1179/026708303225002956.2002
Influence of heat treatment and particle shape on mechanical properties of infiltrated Al2O3 particle reinforced Al-2 wt-%Cu
Materials Science and Technology. 2002. Vol. 18, num. 12, p. 1461. DOI : 10.1179/026708302225007754.Structural materials - Or materials with a structural function
L'Actualité Chimique. 2002. num. 3, p. 13 - 15.Quasistatic and dynamic compression of aluminum-oxide particle reinforced pure aluminum
Materials Science and Engineering A. 2002. Vol. 337, num. 1-2, p. 202. DOI : 10.1016/S0921-5093(02)00035-7.The effect of prior deformation on the foaming behavior of 'FORMGRIP' precursor material
Advanced Engineering Materials. 2002. Vol. 4, num. 10, p. 749 - 752. DOI : 10.1002/1527-2648(20021014)4:10<749::AID-ADEM749>3.0.CO;2-E.Size dependent strengthening in particle reinforced aluminium
Acta Materialia. 2002. Vol. 50, num. 1, p. 39 - 51. DOI : 10.1016/S1359-6454(01)00327-5.Effect of reaction on the tensile behavior of infiltrated boron carbide-aluminum composites
Materials Science and Engineering A. 2002. Vol. 337, num. 1-2, p. 264. DOI : 10.1016/S0921-5093(02)00039-4.2001
Heating of TEM specimens during ion milling
Ultramicroscopy. 2001. Vol. 87, num. 3, p. 123. DOI : 10.1016/S0304-3991(00)00095-4.Influence of damage on the tensile behaviour of pure aluminium reinforced with ?40 vol. pct alumina particles
Acta Materialia. 2001. Vol. 49, num. 18, p. 3699. DOI : 10.1016/S1359-6454(01)00279-8.Diffusion-limited reactive wetting: Spreading of Cu-Sn-Ti alloys on vitreous carbon
Scripta Materialia. 2001. Vol. 44, num. 11, p. 2543 - 2549. DOI : 10.1016/S1359-6462(01)00946-0.Quantification of microdamage phenomena during tensile straining of high volume fraction particle reinforced aluminum
Acta Materialia. 2001. Vol. 49, num. 3, p. 497 - 505. DOI : 10.1016/S1359-6454(00)00334-7.Thermal fatigue of single-crystalline superalloy CMSX-4: A comparison of epitaxial laser-deposited material with the base single crystal
Materials Science and Engineering A. 2001. Vol. 299, num. 1-2, p. 152. DOI : 10.1016/S0921-5093(00)01378-2.Deformation of open-cell aluminum foam
Acta Materialia. 2001. Vol. 49, num. 19, p. 3959. DOI : 10.1016/S1359-6454(01)00294-4.Reply to 'Kinetics of reactive wetting'
Scripta Materialia. 2001. Vol. 45, num. 8, p. 953. DOI : 10.1016/S1359-6462(01)01117-4.Nextel™ 610 alumina fibre reinforced aluminium: Influence of matrix and process on flow stress
Composites - Part A: Applied Science and Manufacturing. 2001. Vol. 32, num. 8, p. 1067 - 1075. DOI : 10.1016/S1359-835X(00)00178-0.Infiltration processing of fibre reinforced composites: governing phenomena
Composites Part A-Applied Science And Manufacturing. 2001. Vol. 32, num. 8, p. 981 - 996. DOI : 10.1016/S1359-835X(01)00015-X.2000
Plasticity in Chevron-notch fracture toughness testing
Engineering Fracture Mechanics. 2000. Vol. 67, num. 3, p. 263. DOI : 10.1016/S0013-7944(00)00061-8.Experimental investigation of stress and strain fields in a ductile matrix surrounding an elastic inclusion
Acta Materialia. 2000. Vol. 48, num. 7, p. 1451. DOI : 10.1016/S1359-6454(99)00444-9.Swift and inverse swift effect in alumina fiber reinforced aluminum wires
Acta Materialia. 2000. Vol. 48, num. 10, p. 2451. DOI : 10.1016/S1359-6454(00)00080-X.The effect of gravity on solution-reprecipitation during liquid phase sintering
Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science. 2000. Vol. 31, num. 2, p. 397 - 400. DOI : 10.1007/s11661-000-0276-y.Fracture strength of alumina fiber reinforced aluminum wire with and without a torsional pre-strain
Acta Materialia. 2000. Vol. 48, num. 12, p. 3235. DOI : 10.1016/S1359-6454(00)00112-9.1999
Diffusion-limited reactive wetting: Study of spreading kinetics of Cu-Cr alloys on carbon substrates
Acta Materialia. 1999. Vol. 47, num. 4, p. 1117. DOI : 10.1016/S1359-6454(99)00008-7.On the use of considere's criterion in tensile testing of materials which accumulate internal damage
Scripta Materialia. 1999. Vol. 41, num. 5, p. 549. DOI : 10.1016/S1359-6462(99)00159-1.Infiltration of fibrous preforms by a pure metal: Part V. Influence of preform compressibility
Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science. 1999. Vol. 30, num. 2, p. 471 - 482. DOI : 10.1007/s11661-999-0337-9.Strength and structure of furnace-brazed joints between aluminum and stainless steel
Welding Journal. 1999. Vol. 78, num. 5, p. 151 - s.Equilibrium shape of prismatic dislocation loops under uniform stress
Acta Materialia. 1999. Vol. 47, num. 8, p. 2357. DOI : 10.1016/S1359-6454(99)00118-4.Plasticity of continuous fiber-reinforced metals
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 1999. Vol. 30, num. 7, p. 1843 - 1866. DOI : 10.1007/s11661-999-0183-9.1998
On the work hardening of fiber reinforced copper
Scripta Materialia. 1998. Vol. 38, num. 7, p. 1109 - 1115. DOI : 10.1016/S1359-6462(98)00016-5.On thermal effects in reactive wetting
Scripta Materialia. 1998. Vol. 38, num. 9, p. 1411 - 1417. DOI : 10.1016/S1359-6462(98)00055-4.Reactive infiltration processing of aluminum-nickel intermetallic compounds
Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science. 1998. Vol. 29, num. 11, p. 2819 - 2828. DOI : 10.1007/s11661-998-0322-8.1997
Kinetics of diffusion-limited spreading of sessile drops in reactive wetting
Scripta Materialia. 1997. Vol. 36, num. 6, p. 645. DOI : 10.1016/S1359-6462(96)00431-9.Thermal expansion responses of pressure infiltrated SiC/Al metal-matrix composites
Journal of Materials Science. 1997. Vol. 32, num. 8, p. 2131. DOI : 10.1023/A:1018535108269.Functionally graded metals and metal-ceramic composites .2. Thermomechanical behaviour
International Materials Reviews. 1997. Vol. 42, num. 3, p. 85 - 116. DOI : 10.1179/imr.1997.42.3.85.Kinetic undercooling in solidification of a hypereutectic Al-Si alloy; Effect of solidifying within a ceramic preform composite
Acta Materialia. 1997. Vol. 46, num. 1, p. 91 - 99. DOI : 10.1016/S1359-6454(97)00228-0.Kinetics of densification by solution-reprecipitation
Acta Materialia. 1997. Vol. 45, num. 2, p. 749 - 758. DOI : 10.1016/S1359-6454(96)00202-9.1996
Forced unidirectional infiltration of deformable porous media
Journal of Fluid Mechanics. 1996. Vol. 311, num. -1, p. 193. DOI : 10.1017/S002211209600256X.Solidification of binary hypoeutectic alloy matrix composite castings
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 1996. Vol. 27, num. 3, p. 595 - 609. DOI : 10.1007/BF02648949.Thermal expansion of metals reinforced with ceramic particles and microcellular foams
Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science. 1996. Vol. 27, num. 11, p. 3700 - 3717. DOI : 10.1007/BF02595462.Analysis of steady-state shallow cell solidification in metal matrix composites
Acta Materialia. 1996. Vol. 44, num. 11, p. 4553 - 4564. DOI : 10.1016/1359-6454(96)00081-X.1995
MIT-ONR Workshop Covers Functionally Graded Structural Materials
MRS Bulletin. 1995. Vol. 20, num. 1, p. 54 - 55. DOI : 10.1557/S0883769400048995.Steady-state cellular solidification of Al-Cu reinforced with alumina fibers
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 1995. Vol. 26 A, num. 8, p. 2141 - 2153. DOI : 10.1007/BF02670685.Magnetic Phase-Diagram Of Mnsi
Journal Of Magnetism And Magnetic Materials. 1995. Vol. 140, p. 119 - 120. DOI : 10.1016/0304-8853(94)01115-X.Processing Of Microcellular Sic Foams .2. Ceramic Foam Production
Journal Of Materials Science. 1995. Vol. 30, num. 4, p. 1037 - 1045. DOI : 10.1007/BF01178442.Processing of microcellular SiC foams
Journal of Materials Science. 1995. Vol. 30, num. 4, p. 1025 - 1032. DOI : 10.1007/BF01178440.Processing Of Microcellular Sic Foams .1. Curing Kinetics Of Polycarbosilane In Air
Journal Of Materials Science. 1995. Vol. 30, num. 4, p. 1025 - 1032. DOI : 10.1007/BF01178440.Functionally graded metals and metal-ceramic composites .1. Processing
International Materials Reviews. 1995. Vol. 40, num. 6, p. 239 - 265. DOI : 10.1179/imr.1995.40.6.239.1994
Capillarity in isothermal infiltration of alumina fiber preforms with aluminum
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 1994. Vol. 25 A, num. 10, p. 2145 - 2152. DOI : 10.1007/BF02652315.Théorie et Pratique de l’Infiltration de Préformes par les Métaux
Revue de Métallurgie, Cahier d'Informations Techniques. 1994. Vol. 91, num. 6, p. 1232.Calorimetry of deformed aluminum reinforced with alumina particles
Scripta metallurgica et materialia. 1994. Vol. 30, num. 12, p. 1509. DOI : 10.1016/0956-716X(94)90299-2.Microsegregation In Cellular Solidification
Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science. 1994. Vol. 25, num. 10, p. 2295 - 2301. DOI : 10.1007/BF02652329.Initial-Stage Hot-Pressing Of Sic Fibre/Ti Monotapes
Composites. 1994. Vol. 25, num. 10, p. 953 - 956. DOI : 10.1016/0010-4361(94)90111-2.1993
Steady-State Solidification Of Reinforced Binary-Alloys
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 1993. Vol. 173, num. 1-2, p. 205 - 212. DOI : 10.1016/0921-5093(93)90217-3.Pressure-Infiltration Processing Of Reinforced Aluminum
Jom-Journal Of The Minerals Metals & Materials Society. 1993. Vol. 45, num. 1, p. 36 - 43. DOI : 10.1007/BF03223364.Synthesis Of Bulk And Reinforced Nickel Aluminides By Reactive Infiltration
Metallurgical Transactions A-Physical Metallurgy And Materials Science. 1993. Vol. 24, num. 10, p. 2161 - 2170. DOI : 10.1007/BF02648590.Status of metal-matrix composite research and development in Japan
JOM. 1993. Vol. 45, num. 3, p. 10 - 18. DOI : 10.1007/BF03222342.Researching Metal-Matrix Composites At Mits Department Of Materials Science And Engineering
Jom-Journal Of The Minerals Metals & Materials Society. 1993. Vol. 45, num. 1, p. 62 - 63. DOI : 10.1007/BF03223371.Initial-Stage Hot-Pressing Of Monosized Ti And 90-Percent Ti-10-Percent Tic Powders
Acta Metallurgica Et Materialia. 1993. Vol. 41, num. 3, p. 955 - 965. DOI : 10.1016/0956-7151(93)90030-V.1992
Infiltration of fibrous preforms by a pure metal: Part IV. Morphological stability of the remelting front
Metallurgical Transactions A-Physical Metallurgy And Materials Science. 1992. Vol. 23, num. 8, p. 2291 - 2299. DOI : 10.1007/BF02646022.Infiltration of fiber preforms by a binary alloy: Part II. Further theory and experiments
Metallurgical transactions. A, Physical metallurgy and materials science. 1992. Vol. 23, num. 8, p. 2263 - 2280. DOI : 10.1007/BF02646020.Structure And Room-Temperature Deformation Of Alumina Fiber-Reinforced Aluminum
Metallurgical Transactions A-Physical Metallurgy And Materials Science. 1992. Vol. 23, num. 4, p. 1207 - 1219. DOI : 10.1007/BF02665052.Solidification Processing Of Metal Matrix Composites
International Materials Reviews. 1992. Vol. 37, num. 3, p. 101 - 128. DOI : 10.1179/imr.1992.37.1.101.Infiltration of fiber preforms by an alloy: Part III. Die casting experiments
Metallurgical transactions. A, Physical metallurgy and materials science. 1992. Vol. 23, num. 8, p. 2281 - 2289. DOI : 10.1007/BF02646021.Wetting of SAFFIL alumina fiber preforms by aluminum at 973 K
Metallurgical transactions. A, Physical metallurgy and materials science. 1992. Vol. 23, num. 7, p. 2071 - 2073. DOI : 10.1007/BF02647554.1991
Chemical stability of zirconia-stabilized alumina fibers during pressure infiltration by aluminum
Metallurgical transactions. A, Physical metallurgy and materials science. 1991. Vol. 22, num. 12, p. 2855 - 2862. DOI : 10.1007/BF02650246.Relaxed configuration of a row of punched prismatic dislocation loops
Scripta metallurgica et materialia. 1991. Vol. 25, num. 3, p. 607.Lorentz Force Infiltration Of Fibrous Preforms
Metallurgical Transactions A-Physical Metallurgy And Materials Science. 1991. Vol. 22, num. 12, p. 2903 - 2915. DOI : 10.1007/BF02650251.Dislocation emission at fibers. I. Theory of longitudinal punching by thermal stresses
Acta metallurgica et materialia. 1991. Vol. 39, num. 7, p. 1405 - 1416. DOI : 10.1016/0956-7151(91)90226-Q.Dislocation emission at fibers. II. Experiments and microstructure of thermal punching
Acta metallurgica et materialia. 1991. Vol. 39, num. 7, p. 1417 - 1429. DOI : 10.1016/0956-7151(91)90227-R.Thermal mismatch dislocations produced by large particles in a strain-hardening matrix
Materials Science and Engineering A. 1991. Vol. A135, num. 1-2, p. 179. DOI : 10.1016/0921-5093(91)90557-4.On the relaxation of a mismatching spheroid by prismatic loop punching
Scripta metallurgica et materialia. 1991. Vol. 25, num. 4, p. 761.On the rate of dendrite arm coarsening
Metallurgical transactions. A, Physical metallurgy and materials science. 1991. Vol. 22, num. 2, p. 569 - 574. DOI : 10.1007/BF02656824.On plastic relaxation of thermal stresses in reinforced metals
Acta metallurgica et materialia. 1991. Vol. 39, num. 2, p. 127 - 139. DOI : 10.1016/0956-7151(91)90261-X.Interfacial phenomena in the solidification processing of metal matrix composites
Materials Science and Engineering A. 1991. Vol. A135, num. 1-2, p. 1. DOI : 10.1016/0921-5093(91)90527-T.Reinforced silver chloride as a model material for the study of dislocations in metal matrix composites
Materials Science and Engineering A. 1991. Vol. A144, num. 1-2, p. 179. DOI : 10.1016/0921-5093(91)90224-B.Interface structure in infiltrated composites of aluminum reinforced with alumina-silica fiber preforms
Metallurgical transactions. A, Physical metallurgy and materials science. 1991. Vol. 22, num. 5, p. 1126 - 1128. DOI : 10.1007/BF02661109.Lorentz-Force-Driven Infiltration By Aluminum
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 1991. Vol. 144, p. 165 - 168. DOI : 10.1016/0921-5093(91)90222-9.Correction
Metallurgical Transactions A-Physical Metallurgy And Materials Science. 1991. Vol. 22, num. 6, p. 1466 - 1466. DOI : 10.1007/BF02660679.Fabrication Of Cast Particle-Reinforced Metals Via Pressure Infiltration
Journal Of Materials Science. 1991. Vol. 26, num. 9, p. 2519 - 2526. DOI : 10.1007/BF01130205.Particle Matrix Bonding In Alumina-Steel Composites
Scripta Metallurgica Et Materialia. 1991. Vol. 25, num. 8, p. 1917 - 1920. DOI : 10.1016/0956-716X(91)90328-X.1990
Corrigenda And Comments On The Infiltration Of Fiber Preforms
Metallurgical Transactions A-Physical Metallurgy And Materials Science. 1990. Vol. 21, num. 8, p. 2287 - 2287. DOI : 10.1007/BF02647893.Proposal for a Generic Materials Processing Course
MRS Bulletin. 1990. Vol. 15, p. 35 - 36. DOI : 10.1557/S0883769400058929.Infiltration of fiber preforms by a binary alloy: Part I. Theory
Metallurgical transactions. A, Physical metallurgy and materials science. 1990. Vol. 21, num. 7, p. 2059 - 2072. DOI : 10.1007/BF02647253.Infiltration of fibrous preforms by a pure metal: part III. Capillary phenomena
Metallurgical transactions. A, Physical metallurgy and materials science. 1990. Vol. 21, num. 8, p. 2257 - 2263. DOI : 10.1007/BF02647888.1989
Infiltration of fibrous preforms by a pure metal. Part II. Experiment
Metallurgical transactions. A, Physical metallurgy and materials science. 1989. Vol. 20, num. 11, p. 2549 - 2557. DOI : 10.1007/BF02666689.Inorganic Composite Materials in Japan - Status and Trends
Scientific Bulletin, Office of Naval Research. 1989.Infiltration of fibrous preforms by a pure metal. Part I. Theory
Metallurgical transactions. A, Physical metallurgy and materials science. 1989. Vol. 20, num. 11, p. 2535 - 2547. DOI : 10.1007/BF02666688.Solidification processing of metal-matrix composites
Materials and Design. 1989. Vol. 10, num. 2, p. 68.On the influence of coarsening on microsegregation
Metallurgical transactions. A, Physical metallurgy and materials science. 1989. Vol. 20, num. 2, p. 247 - 253. DOI : 10.1007/BF02670250.1988
Columnar Dendritic Solidification In A Metal-Matrix Composite
Metallurgical Transactions A-Physical Metallurgy And Materials Science. 1988. Vol. 19, num. 3, p. 709 - 721. DOI : 10.1007/BF02649285.Solidification Processing of Metal-Matrix Composites
Journal of Metals. 1988. Vol. 40, num. 2, p. 12 - 19. DOI : 10.1007/BF03258826.Fundamental aspects of solidification processing of metal matrix composites by pressure infiltration techniques
Israel Journal of Technology. 1988. Vol. 24, num. 3 -4,Pt B, p. 359.1987
Solidification of Infiltrated Metal Matrix Composites
Metallurgical Science and Technology. 1987. Vol. 5, p. 3 - 10.On the infiltration of metal matrix composites
Metallurgical transactions. A, Physical metallurgy and materials science. 1987. Vol. 18, num. 6, p. 1160 - 1163. DOI : 10.1007/BF02668570.1986
Alloy Microstructures of Cast Metal Matrix Composites
Journal of Metals. 1986. Vol. 38, p. 30 - 35. DOI : 10.1007/BF03257892.PROCESSING OF METAL AND CERAMIC MATRIX COMPOSITE
American Ceramic Society Bulletin. 1986. Vol. 65, num. 2, p. 293.Enseignement & Phd
Enseignement
Materials Science and Engineering