Arnaud Bertsch
EPFL STI IMT LMIS4
BM 3124 (Bâtiment BM)
Station 17
CH-1015 Lausanne
Web site: Web site: https://lmis4.epfl.ch/
Publications
Infoscience publications
Infoscience
Nanovolcano microelectrode arrays: toward long-term on-demand registration of transmembrane action potentials by controlled electroporation
Microsystems & Nanoengineering. 2020-08-25. DOI : 10.1038/s41378-020-0178-7.Feedback-free microfluidic oscillator with impinging jets
Physical Review Fluids. 2020-05-13. DOI : 10.1103/PhysRevFluids.5.054202.Intracellular Recording of Cardiomyocyte Action Potentials with Nanopatterned Volcano-Shaped Microelectrode Arrays
Nano Letters. 2019-08-19. DOI : 10.1021/acs.nanolett.9b02209.Ion beam etching redeposition for 3D multimaterial nanostructure manufacturing
Microsystems & Nanoengineering. 2019-04-22. DOI : 10.1038/s41378-019-0052-7.Microstereolithography
Three-Dimensional Microfabrication Using Two-Photon Polymerization (Second Edition); Elsevier / William Andrew Publishing, 2019. p. 732.Microfluidics: A New Layer of Control for Extrusion-Based 3D Printing
Micromachines. 2018. DOI : 10.3390/mi9020086.Pore Size Manipulation in 3D Printed Cryogels Enables Selective Cell Seeding
Advanced Materials Technologies. 2018. DOI : 10.1002/admt.201700340.In vivo neurochemical measurements in cerebral tissues using a droplet-based monitoring system
Nature Communications. 2017. DOI : 10.1038/s41467-017-01419-1.Multimaterial Nanoporous Membranes Shaped through High Aspect-Ratio Sacrificial Silicon Nanostructures
ACS Omega. 2017. DOI : 10.1021/acsomega.7b00084.Droplet extraction module for the analysis of segmented flow generated by a neural probe
2016. MicroTAS 2016, Dublin, Ireland. p. 1015-1016.Fabrication of nanoporous membranes through silicon templates : two different approaches
2016. 5th Micro and Nano Flows Conference (MNF 2016), Milan, Italy, September 11-14, 2016. p. ID197.1-2.Cell-Imprinted Substrates Modulate Differentiation, Redifferentiation, and Transdifferentiation
ACS Applied Materials & Interfaces. 2016. DOI : 10.1021/acsami.6b03302.Neural probe combining microelectrodes and a droplet-based microdialysis collection system for high temporal resolution sampling
Lab on a Chip. 2016. DOI : 10.1039/C5LC01544H.Thermal gate, a new tool for ionic transport control inside nanochannels
2015. 15TH INTERNATIONAL CONFERENCE ON NANOTECHNOLOGY, Rome, Italy, July 27-30, 2015. p. 1320-1323.On-chip synthesis of fine-tuned bone-seeking hybrid nanoparticles
Nanomedicine. 2015. DOI : 10.2217/nmm.15.162.A Simple and Reliable PDMS and SU-8 Irreversible Bonding Method and Its Application on a Microfluidic-MEA Device for Neuroscience Research
Micromachines. 2015. DOI : 10.3390/mi6121465.Fabrication of multilayered nanofluidic membranes through silicon templates
Nanoscale. 2015. DOI : 10.1039/C5NR05288B.Thermal control of ionic transport and fluid flow in nanofluidic channels
Nanoscale. 2015. DOI : 10.1039/C5NR05409E.Microstereolithography
Three-Dimensional Microfabrication Using Two-photon Polymerization; Elsevier, 2015. p. 20-44.Special Issue: 15 Years of SU8 as MEMS Material
Micromachines. 2015. DOI : 10.3390/mi6060790.Temperature Sensitivity of Nanochannel Electrical Conductance
ACS Nano. 2015. DOI : 10.1021/acsnano.5b01196.An improved model for predicting electrical conductance in nanochannels
Phys. Chem. Chem. Phys.. 2015. DOI : 10.1039/C4CP05338A.Composite hydrogel-loaded alumina membranes for nanofluidic molecular filtration
Journal of Membrane Science. 2015. DOI : 10.1016/j.memsci.2014.12.023.Enclosed Electronic System for Force Measurements in Knee Implants
Sensors. 2014. DOI : 10.3390/s140815009.Microfluidic-Assisted Self-Assembly of Complex Dendritic Polyethylene Drug Delivery Nanocapsules
Advanced Materials. 2014. DOI : 10.1002/adma.201305753.On-Chip Fabrication of Paclitaxel-Loaded Chitosan Nanoparticles for Cancer Therapeutics
Advanced Functional Materials. 2014. DOI : 10.1002/adfm.201301628.Smart instrumentation for determination of ligament stiffness and ligament balance in total knee arthroplasty
Medical Engineering & Physics. 2014. DOI : 10.1016/j.medengphy.2013.12.001.A microfluidic approach to synthesizing high-performance microfibers with tunable anhydrous proton conductivity
Lab On A Chip. 2013. DOI : 10.1039/c3lc50862e.Al2O3/W hetero-structured nanopore membranes: From native to tunable nanofluidic diodes
2013. 8th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS), Suzhou, China, April 7-10, 2013. p. 998-1001. DOI : 10.1109/NEMS.2013.6559890.Design and test of a MEMS strain-sensing device for monitoring artificial knee implants
Biomedical Microdevices. 2013. DOI : 10.1007/s10544-013-9770-z.Field effect modulated nanofluidic diode membrane based on Al2O3/W heterogeneous nanopore arrays
Applied Physics Letters. 2013. DOI : 10.1063/1.4807781.Nafion/chitosan-wrapped CNT nanocomposite membrane for high-performance direct methanol fuel cells
RSC Advances. 2013. DOI : 10.1039/c3ra40480c.Label-Free Recognition of Drug Resistance via Impedimetric Screening of Breast Cancer Cells
PLoS ONE. 2013. DOI : 10.1371/journal.pone.0057423.Microfluidic assisted self-assembly of chitosan based nanoparticles as drug delivery agents
Lab on a Chip. 2013. DOI : 10.1039/c2lc41045a.Instrumented Knee Prosthesis for Force and Kinematics Measurements
IEEE Transactions on Automation Science and Engineering. 2013. DOI : 10.1109/TASE.2012.2226030.Polyimide/SU-8 catheter-tip MEMS gauge pressure sensor
Biomedical Microdevices. 2012. DOI : 10.1007/s10544-012-9661-8.Facile fabrication of nanofluidic diode membranes using anodic aluminium oxide
Nanoscale. 2012. DOI : 10.1039/c2nr31243c.Microfluidic synthesis of chitosan-based nanoparticles for fuel cell applications
Chemical communications (Cambridge, England). 2012. DOI : 10.1039/c2cc33253a.A microfluidic-based frequency-multiplexing impedance sensor (FMIS)
Lab on a Chip. 2012. DOI : 10.1039/c2lc40236j.Simulation of epiretinal prostheses - Evaluation of geometrical factors affecting stimulation thresholds
Journal of NeuroEngineering and Rehabilitation. 2011. DOI : 10.1186/1743-0003-8-44.Instrumented Prosthesis for Knee Implants Monitoring
2011. IEEE Conference on Automation Science and Engineering (IEEE CASE), Trieste, Italy, August 24 - 27, 2011. p. 828-835. DOI : 10.1109/CASE.2011.6042490.Distinguishing drug-induced minor morphological changes from major cellular damage via label-free impedimetric toxicity screening
Lab on a Chip. 2011. DOI : 10.1039/c1lc20212j.Microstereolithography
Stereolithography Materials, Processes and Applications; Springer, 2011. p. 81-112.Simulations to study spatial extent of stimulation and effect of electrode–tissue gap in subretinal implants
Medical Engineering & Physics. 2011. DOI : 10.1016/j.medengphy.2011.01.015.Direct localised measurement of electrical resistivity profile in rat and embryonic chick retinas using a microprobe
Journal of Electrical Bioimpedance. 2010.Direct Observation of Transitions between Surface-Dominated and Bulk Diffusion Regimes in Nanochannels
Analytical Chemistry. 2009. DOI : 10.1021/ac900617b.Wireless contact lens sensor for intra ocular pressure monitoring: assessment on enucleated pig eyes
Acta Ophthalmologica. 2009. DOI : 10.1111/j.1755-3768.2008.01404.x.Microfluidic hydrogel layers with multiple gradients to stimulate and perfuse three-dimensional neuronal cell cultures
2009. Eurosensors XXIII conference, Lausanne, Switzerland, September 6-9, 2009. p. 369-372. DOI : 10.1016/j.proche.2009.07.092.Direct measurement of diffusing proteins in nanochannels using fluorescence correlation spectroscopy
2009. Eurosensors XXIII conference, Lausanne, Switzerland, September 6-9, 2009. p. 1343-1346. DOI : 10.1016/j.proche.2009.07.335.in vivo Electrical Impedance Spectroscopy of Tissue Reaction to Microelectrode Arrays
IEEE Transactions on Biomedical Engineering. 2009. DOI : 10.1109/TBME.2009.2018457.Towards a nanostructured thermoelectric generator using ion-track lithography
Journal of Micromechanics and Microengineering. 2008. DOI : 10.1088/0960-1317/18/10/104015.Healthy Aims: Developing new medical implants and diagnostic equipment
IEEE Pervasive Computing. 2008. DOI : 10.1109/MPRV.2008.8.A Novel Method for Determining the Effective Diffusion Coefficients of Proteins into Confined Areas
2008. USGEB, Lausanne, February 6-7, 2008. p. 59.Fluorine based plasma treatment of biocompatible silicone elastomer. Effect of temperature on etch rate and surface properties
Plasma Processes and Polymers. 2008. DOI : 10.1002/ppap.200700130.Demonstration of cortical recording using novel flexible polymer neural probes
Sensors and Actuators A: physical. 2008.Direct measurement of effective diffusion coefficients in nanochannels using steady-state dispersion effects
Virtual Journal of Biological Physics Research. 2007.Direct measurement of effective diffusion coefficients in nanochannels using steady-state dispersion effects
Virtual Journal of Nanoscale Science & Technology. 2007.Determining the Diffusion Coefficients of Proteins Inside a Nanoslit
2007. Nanotech-Montreux 2007, 14-16.11.2007.Assessment on Enucleated Pig Eyes of a Minimally Invasive Contact Lens Sensor for IOP Monitoring
2007. Annual meeting of the American Academy of Ophthalmology 2007.Controlled Release Drug Coatings on Flexible Neural Probes
2007. 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society EMBS, Lyon, August 23-26, 2007. p. 6612-6615.Technology developments to initiate a next generation of Cochlear Implants
2007. IEEE EMBS, Lyon, FRANCE, august 23-26, 2007. p. 515-518.Demonstration of cortical recording and reduced inflammatory response using flexible polymer neural probes
2007. MEMS’07. p. 573-576.The effect of biodegradable drug release coatings on the electrical characteristrics of neural electrodes
2007. Transducers 07. p. 1377-1380.Contraction measurements of cardiomyocytes grown on silicon cantilevers
2007. Transducers 07. p. 17-19.Direct Measurement of Effective Diffusion Coefficients in Nanochannels Using Steady-State Dispersion Effects
Applied Physics Letters. 2007. DOI : 10.1063/1.2801625.Developments in Sensor Systems
Medical Device Technology. 2007.SU-8 nanocomposite coatings with improved tribological performance for MEMS
Surface & coatings technology. 2006. DOI : 10.1016/j.surfcoat.2006.03.041.Effect of filler behavior on nanocomposite SU8 photoresist for moving micro- parts
Microelectronic Engineering. 2006. DOI : 10.1016/j.mee.2006.01.068.SU-8 nanocomposite photoresist with low stress properties for microfabrication applications
Microelectronic engineering. 2006.pH Controlled Diffusion of Proteins with Different pI Values across a Nanochannel on a Chip
Nano Letters. 2006. DOI : 10.1021/nl052372h.Conductive SU8 Photoresist for Microfabrication
Advanced Functional Materials. 2005.Partial release and detachment of microfabricated metal and polymer structures by anodic metal dissolution
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS. 2005. DOI : 10.1109/JMEMS.2004.839328.First steps toward noninvasive intraocular pressure monitoring with a sensing contact lens
INVESTIGATIVE OPHTHALMOLOGY & VISUAL SCIENCE. 2004. DOI : 10.1167/iovs.04-0015.SU8-silver photosensitive nanocomposite
ADVANCED ENGINEERING MATERIALS. 2004. DOI : 10.1002/adem.200400068.Resistivity probing of multi-layered tissue phantoms using microelectrodes
PHYSIOLOGICAL MEASUREMENT. 2004. DOI : 10.1088/0967-3334/25/3/005.Flexible polyimide probes with microelectrodes and embedded microfluidic channels for simultaneous drug delivery and multi-channel monitoring of bioelectric activity
BIOSENSORS & BIOELECTRONICS. 2004.Polyimide microfluidic devices with integrated nanoporous filtration areas manufactured by micromachining and ion track technology
JOURNAL OF MICROMECHANICS AND MICROENGINEERING. 2004. DOI : 10.1088/0960-1317/14/3/002.Microfabrication of ceramic components by microstereolithography
JOURNAL OF MICROMECHANICS AND MICROENGINEERING. 2004. DOI : 10.1088/0960-1317/14/2/005.Ceramic microcomponents by microstereolithography
2004. 17th IEEE International Conference on Micro Electro Mechanical Systems, Maastricht, NETHERLANDS, JAN 25-29, 2004. p. 725-728.Conductive SU8-silver composite photopolymer
2004. 17th IEEE International Conference on Micro Electro Mechanical Systems, Maastricht, NETHERLANDS, JAN 25-29, 2004. p. 125-128.Cell immersion and cell dipping in microfluidic devices
LAB ON A CHIP. 2004. DOI : 10.1039/b311210a.Polyimide and SU-8 microfluidic devices manufactured by heat- depolymerizable sacrificial material technique
LAB ON A CHIP. 2004. DOI : 10.1039/b310866j.Dielectric spectroscopy in a micromachined flow cytometer: theoretical and practical considerations
LAB ON A CHIP. 2004. DOI : 10.1039/b313761a.High aspect ratio, 3D structuring of photoresist materials by ion beam LIGA
MICROELECTRONIC ENGINEERING. 2003.Microstereolithography: a review
2003. Symposim on Rapid Prototyping Technologies, BOSTON, MASSACHUSETTS, DEC 03-05, 2002. p. 3-15.A soft contact lens with a MEMS strain gage embedded for intraocular pressure monitoring
2003. 12th International Conference on Solid-State Sensors, Actuators and Microsystems, BOSTON, MASSACHUSETTS, JUN 09-12, 2003. p. 1043-1046.Composite photopolymer microstructures: From planar to 3D devices
2003. 12th International Conference on Solid-State Sensors, Actuators and Microsystems, BOSTON, MASSACHUSETTS, JUN 09-12, 2003. p. 991-994.Flexible microchannels with integrated nanoporous membranes for filtration and separation of molecules and particles
2002. 15th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2002), LAS VEGAS, NEVADA, JAN 20-24, 2002. p. 81-84.Methods and algorithms for the slicing process in microstereolithography
RAPID PROTOTYPING JOURNAL. 2002. DOI : 10.1108/13552540210431013.3D micromixers - Downscaling large scale industrial static mixers
2001. 14th IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2001), INTERLAKEN, SWITZERLAND, JAN 21-25, 2001. p. 507-510.Microstereolithography: Concepts and applications
2001. 8th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2001), ANTIBES JUAN LES PINS, FRANCE, OCT 15-18, 2001. p. 289-298.Static micromixers based on large-scale industrial mixer geometry
LAB ON A CHIP. 2001. DOI : 10.1039/b103848f.3D microfabrication by combining microstereolithography and thick resist UV lithography
SENSORS AND ACTUATORS A-PHYSICAL. 1999.Microstereolithography: a new process to build complex 3D objects
1999. Conference on Design, Test, and Microfabrication of MEMS and MOEMS, PARIS, FRANCE, MAR 30-APR 01, 1999. p. 808-817.Combining microstereolithography and thick resist UV lithography for 3D microfabrication
1998. 11th Annual International Workshop on Micro Electro Mechanical Systems, HEIDELBERG, GERMANY, JAN 25-29, 1998. p. 18-23.Selected publications
| Arnaud Bertsch, Stephan Heimgartner, Peter Cousseau, Philippe Renaud Lab on a Chip, 1 (1), 2001 |
Static micromixers based on large-scale industrial mixer geometry |
| Arnaud Bertsch, S�bastien Jiguet, Philippe Renaud J. Micromech. Microeng., 14 (2), 2004 |
Microfabrication of ceramic components by microstereolithography |
| Arnaud Bertsch, Paul Bernhard, Christian Vogt, Philippe Renaud Rapid Prototyping Journal, 6 (4), 2001 |
Rapid prototyping of small size objects |
| Stefan Metz, Arnaud Bertsch, Daniel Bertrand and Philippe Renaud Biosensors & bioelectronics, 19 (10), 2004. |
Flexible polyimide probes with microelectrodes and embedded microfluidic channels for simultaneous drug delivery and multi-channel monitoring of bioelectric activity |