Ian F. C. Smith
Domaines de compétences
Contrôle actif des structures
Informatique de l'ingénieur
BiographiePhD Université de Cambridge, 1982
1 Contrôle actif de la forme des structures pour améliorer leur aptitude au service et leur déploiement
2 Structures biomimétiques (apprentissage, auto-diagnostic, auto-réparation)
3 Gestion de l'infrastructure par l'identification structurale
4 Applications avancées de l'informatique
Plus de détails, voir http://imac.epfl.ch/page-14009-fr.html
Comparative study of the effects of three data-interpretation methodologies on the performance of geotechnical back analysisInternational Journal For Numerical And Analytical Methods In Geomechanics. 2020-10-25. DOI : 10.1002/nag.3120.
A Novel Strategy to Design Measurement Systems For Bridge Load Testing2020-07-07.
Occupant- detection strategy using footstep-induced floor vibrations2019-11-14. 1st ACM International Workshop on Device-Free Human Sensing (DFHS), New York, USA, November 10-14, 2019. p. 31-34.
Structures that adapt to loads through large shape changes: design and optimization2019-08-21. Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications, Cape Town, September 2-4, 2019.
Occupant tracking using model-based data interpretation of structural vibrations2019-08-08. SHMII-9 - 9th International Conference on Structural Health Monitoring of Intelligent Infrastructure, St-Louis, Missouri, US, August 4-7, 2019.
Model-based interpretation of floor vibrations for indoor occupant tracking2019-07-03. 26th International Workshop on Intelligent Computing in Engineering, Leuven, Belgium, June 30 - July 2, 2019.
Damage mitigation of a near-full-scale deployable tensegrity structure through behavior biomimeticsCaltech Engineering Mechanics Institute Conference 2019, Pasadena, CA, USA, June 18-21, 2019.
Accurate and efficient interpretation of load-test data for asset managementTufts University.
Accurate and efficient model-based data-interpretation to assist asset-management decision-makingTechnical University of Munich (TUM).
Data interpretation in model updating and prediction with applications to bridgesTechnology Centre for Offshore and Marine, Singapore (TCOMS).
Diagnosis and prognosis of civil infrastructure for better asset managementWorld Engineers Summit - WES2019. Engineering Future Cities - Harnessing and Managing Technologies to Improve Quality of Life, Singapore, 27-30 August, 2019.
Asset management and responsive structuresUniversity of Waterloo.
Monitoring for asset management: Using sensed structures to build responsive cities9th International Conference on Structural Health Monitoring of Intelligent Infrastructure (SHMII-9), St-Louis, Missouri, US, August 4-7, 2019.
Asset Management and Responsive StructuresUniversity of Central Florida.
Element location and classification following a damage event of a near-full-scale deployable tensegrity structure2019. Form and Force 2019. IASS Symposium 2019: 60th Anniversary Symposium of the International Association for Shell and Spatial Structures Structural Membranes 2019, Barcelona, Spain, Octobre 7-10, 2019.
Measurement-system design framework using multi-objective optimization for bridge load testing”2019. World Congress on Resilience, Reliability and Asset Management, Singapore, July 28-30, 2019.
Comparison of data interpretation methodologies for geotechnical back analysis2019. 9th Asian Young Geotechnical Engineers Conference, Lahore, Pakistan, December 5-7, 2019.
Exploring potential benefits of bridge condition assessment in highway operations2019. IABSE Congress, New York, NY, USA, September 4-6, 2019.
Identification of Train Wheel Flat Accounting for Measurement and Modeling Uncertainties2019. Structural Health Monitoring 2019: Enabling Intelligent Life-cycle Health Management for Industry Internet of Things (IIOT), Stanford, California, USA. DOI : 10.12783/shm2019/32153.
Is there a relationship between footstep-impact locations and measured signal characteristics?2019. 1st ACM International Workshop on Device-Free Human Sensing - DFHS'19, New York, NY, USA. p. 62-65. DOI : 10.1145/3360773.3360888.
A Comparison of Greedy and Global Searches for Measurement-System Design in Bridge Load Testing2019. 5th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, Postdam, Germany, August 27-29, 2019.
Experimental testing of a small-scale truss beam that adapts to loads through large shape changes2019. The 9th ECCOMAS Thematic Conference on Smart Structures and Materials, Paris, France, July 8-11, 2019.
Using Regularized Linear-Regression Surrogate Models for Accurate Probabilistic Structural Identification2019-01-01. ASCE International Conference on Computing in Civil Engineering (i3CE), Atlanta, GEORGIA, Jun 17-19, 2019. p. 367-373.
Dynamique des Structures. Bases et applications pour le génie civilLausanne: Presses Polytechniques et Universitaires Romandes.
Using data interpretation to enhance post-seismic decision making at urban scale2019. IABSE Conference Guimarães 2019: Towards a Resilient Built Environment – Risk and Asset Management, Guimarães, Portugal, March 27-29, 2019.
Multi-fidelity modelling for structural identification2019. IABSE Conference Guimarães 2019: Towards a Resilient Built Environment – Risk and Asset Management, Guimarães, Portugal, March 27-29, 2019.
Comparing applicability of Bayesian model updating and error-domain model falsification based on computational and engineering considerations2019. SHMII-9 - 9th International Conference on Structural Health Monitoring of Intelligent Infrastructure, St-Louis, USA, August 4-7, 2019.
Measurement data interpretation for sustainable asset management and for future responsive cities (Keynote talk)8th International Conference of Tropical and Subtropical Green Building Council Alliance & 9th Cross-Strait Green Building Technology Development Forum, Hong Kong, November, 18-20, 2018.
Design and Control of Adaptive Civil Structures: towards an Energy Approach to Structural EngineeringHenderson Lecture, Cambridge University, July 2-4, 2018.
Engineering tasksCambridge University, Engineering Department, UK, June 18-19, 2018.
Advanced measurement data interpretation for sustainable asset management (Keynote talk)ICCCBE, Tampere, Finland, June, 4-7, 2018.
Using data-interpretation methodologies to incorporate information iteratively for asset-management decision makingEngineering Mechanics Institute Conference, Boston, USA, May 29-June 1, 2018.
Enhancing asset management with measurementsCarnegie Mellon University.
An engineering approach to interpreting measurement data for asset managementCurtin University, Perth, Australia.
Soil Parameter Identification for Excavations: A Falsification Approach2018. 9th European Conference on Numerical Methods in Geotechnical Engineering, Porto, Portugal, June 25-27, 2018.
Teaching Fundamentals of Computing to Civil Engineers – Challenges and SolutionsTransforming Engineering Education through Innovative Computer Mediated Learning Technologies; American Society of Civil Engineers, 2018.
Improvement of deployment trajectory of a tensegrity structure using a path-planning algorithm2018. IASS 2018, Boston.
Multi-model approach to assess the ultimate flexural capacity of existing concrete bridges2018. 12th FIB International PhD Symposium in Civil Engineering, Prague, Czech Republic.
Comparison of model-based identification methods for reserve-capacity assessment of existing bridges2018. IABSE Conference 2018, Copenhagen, DK.
User-interface development for model-based data-interpretation2018. NDT.net 2018, Manchester, UK.
Application of a sequence-free iterative structural identification framework for reserve capacity estimation of a steel-concrete composite bridge2018. Structures Congress 2018, Fort Worth, Texas, April 19-21, 2018.
Adaptive approach for sensor placement combining a quantitative strategy with engineering practice2018. EG-ICE Workshop 2018, Lausanne, Switzerland, June 10-13, 2018. DOI : 10.1007/978-3-319-91638-5_11.
A new method to design structures that adapt to loads via large shape changes2018. International Association for Shell and Spatial Structures, Creativity in Structural Design, Boston, Massachusetts, USA, July 16-20, 2018.
Actuator Layout Optimization for Adaptive Structures Performing Large Shape Changes, Advanced Computing Strategies for Engineering2018. p. 111-129. DOI : 10.1007/978-3-319-91638-5_6.
Structural Resilience through Model-Based Data Interpretation: From Building to City-Scale Post-Seismic Assessment2018. Sixth International Symposium on Reliability Engineering and Risk Management, Singapore, May 31 - June 1, 2018.
An Active Deployable Tensegrity-Ring Footbridge System2017. 15th Biennial ASCE Conference on Engineering, Science, Construction, and Operations in Challenging Environments, Orlando, FL, USA.
Dynamic effects of cable rupture in a tensegrity structure2017. 4th Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures (SMAR), Zurich, 2017.
Improving infrastructure-asset management through reasoning that is compatible with mental models of engineers2017. 24th EG-ICE Workshop, Nottingham, 2017.
A Practical Engineering Approach to Interpreting Measurement Data in Uncertain Contexts2017. International Conference on Sustainable Infrastructure, New Yourk, 2017. p. 26-38.
Large and reversible shape changes as a strategy for structural adaptation2017. IASS 2017, Hamburg, 2017.
Vibration-based occupant detection using a multiple-model approach2017. IMAC XXXV -Structural Dynamics Challenges in Next Generation Aerospace Systems, Garden Grove, CA, USA, 2017.
Exploring the solution space in error-domain model falsification using classification algorithms2017. 4th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, Zurich.
Cyber Civil Infrastructure and IoT for Cities2017. IEEE Symposium Series on Computational Intelligence (SSCI), Hawaii, USA, December 2017.
Structural model updating for reserve capacity estimation in concrete bridges2017. Structural Health Monitoring of Intelligent Infrastructure, Brisbane Australia, December 2017.
Improving prediction capability of finite element models of bridges using static and dynamic data2017. Structural Health Monitoring of Intelligent Infrastructure, Brisbane Australia, December 2017.
Comparing algorithms for measurement system design for bridge load testing2017. Structural Health Monitoring of Intelligent Infrastructure, Brisbane Australia, December 2017.
Usefulness of ambient-vibration measurements for seismic assessment of existing structures2017. 4th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures, Zurich, Switzerland, September 13-15, 2017.
Dynamique des Structures. Bases et applications pour le génie civil.Lausanne: Presses Polytechniques et Universitaires Romandes.
Traffic-Based Condition Assessment and Fatigue-Life Predictions for a Highway Bridge2017. Structures Congress, Denver, CO, APR 06-08, 2017. p. 431-441.
Comparing Three Methodologies for System Identification and Prediction2017. 14th International Probabilistic Workshop, Ghent, Belgium, 2016. p. 81-95. DOI : 10.1007/978-3-319-47886-9_6.
Shape control for self-stress of a deployable tensegrity footbridge2016. 23rd Workshop of the European Group of Intelligent Computing in Engineering, Kracow.
Towards biomimetic actuation for a deployable structure2016. International Association for Shell and Spatial Structures, Tokyo.
The Singapore cyber-civil-infrastructure project2016. Transforming the Future of Infrastructure through Smarter Information, Cambridge.
Structures that learn, self-diagnose and adapt2016. IASS 2016, Tokyo.
Measurement system design based on the expected utility of monitoring actions2016. 16th International Conference on Computing in Civil and Building Engineering, Osaka.
Comparing case studies of a new structural identification framework based on model falsification reasoning2016. Proceedings 6th Int. Conf. on Str. Eng. Mech. Comp.,, Cape Town, South Africa.
Performance Assessment and Prognosis for Civil Infrastructure Based on Model Falsification Reasoning2015. 7th Int. conference on Structural Health Monitoring of Intelligent, ISHMI, Turin, Italie, July 1-3, 2015.
Error Assessment of Machine Vision Techniques for Object Detection and Evaluation2015. ASCE International Workshop on Computing in Civil Engineering, Austin, Texas, USA, 21-23 June 2015.
Wind simulations around buildingsFCL Magazine. 2015.
Friction modelling of a deployable tensegrity footbridge2015. International Association for Shell and Spatial Structures Symposium 2015, Amsterdam, The Netherlands, 19 August, 2015.
A framework for optimal sensor placement in full-scale studies of wind around buildings2015. 14th International Conference on Wind Engineering ICWE14, Porto Alegre, Brazil, June 21-26, 2015.
Mid-span connection of a deployable tensegrity footbridge2015. 22nd EG-ICE International Workshop, Eindhoven, The Netherlands, July, 13-15, 2015.
A deployable tensegrity footbridge that connects at mid-span2015. International Association for Shell and Spatial Structures (IASS) Symposium 2015, Amsterdam Future Visions, Amsterdam, The Netherlands, August 17-20, 2015.
Using electrical resistance networks to enhance performance assessments of water distribution networks2015. 7th International Conference on Structural Health Monitoring of Intelligent Infrastructure (SHMII), Torino, Italy, July 1-3, 2015.
Reducing the uncertainty on the structural behaviour of existing structures through data interpretation2015. 7th International Conference on Structural Health Monitoring of Intelligent Infrastructure (SHMII), Torino, Italy, July 1-3, 2015.
Evaluating seismic retrofitting efficiency through ambient vibration tests and analytical models2015. IABSE Conference – Structural Engineering: Providing Solutions to Global Challenges, Geneva (Switzerland), September 23-25,2015.
Using measurements to reduce model uncertainty for better predictions2015. IABSE Conference - Structural Engineering: Providing Solutions to Global Challenges, Geneva, Switzerland, September 23-25, 2015.
Sources and forms of modelling uncertainties for structural identification2015. 7th International Conference on Structural Health Monitoring of Intelligent Infrastructure (SHMII), Torino, Italy, July 1-3, 2015.
Performance comparison for reduced network models for leak region detection in water distribution networks2014. Proceedings of the 21st International Workshop: Intelligent Computing in Engineering, European Group for Intelligent Computing in Engineering, Cardiff, UK, July 16-18, 2014.
Toward development of a biomimetic tensegrity footbridge2014. 6WCSCM: Sixth World Conference on Structural Control and Monitoring, Barcelona, Spain, July 15-17, 2014.
Engineering Informatics2014. Structures Congress 2014, American Society of Civil Engineers, Boston, Massachusetts, USA, April 3-5, 2014. p. 1070-1077.
Probabilistic Model Falsification for Structural Identification2013. 11th International Conference on Structural Safety & Reliability (ICOSSAR), New York, USA, June 16-20, 2013.
Sensor placement for predicting airflow around buildings to enhance natural ventilation2013. ASHRAE IAQ 2013: Environmental Health in Low Energy Buildings, Vancouver, British Columbia, Canada, October 15-18, 2013.
Engineering Informatics – Fundamentals of Computer-Aided EngineeringWiley.
Temperature Variations as Loads Cases for Structural Identification2013. of 6th International Conference on Structural Health Monitoring of Intelligent Infrastructure (SHMII), Hong Kong, 2013.
Data Processing and Direct Data InterpretationStructural Identification of Constructed Systems; American Society of Civil Engineers, Reston, VA, USA, 2013. p. 65-77.
Structural Identification for Selection, Application, and Calibration of Physics-Based ModelsStructural Identification of Constructed Systems; American Society of Civil Engineers, Reston, VA, USA, 2013. p. 78-112.
Langesand BridgeCase Studies of the Structural Identification of Bridges; American Society of Civil Engineers, Reston, VA USA, 2013. p. 205-208.
Structural identification methods for full-scale bridges2013. Structures Congress, American Society of Civil Engineers, Pittsburgh, 2013. p. 319-327.
Detecting leak regions through model falsification2013. 20th International Workshop: Intelligent Computing in Engineering 2013, Vienna, Austria, Jully 1-3, 2013.
A transformable tensegrity-footbridge system2013. Transformable-2013 In the Honor of Emilio Pérez Piñero, Sevilla, Spain, September 18-20, 2013. p. 189-194.
Improving Remaining-Fatigue-Life Evaluation Using Data Interpretation2013. 6th International Conference on Structural Health Monitoring of Intelligent Infrastructure (SHMII), Hong Kong, December 9-11, 2013.
Model-Based Data Interpretation and Diagnosis Robustness2013. 11th International Conference on Structural Safety & Reliability (ICOSSAR), New York, NY, USA, June 16-20, 2013. p. 2497-2504.
Evaluating modeling uncertainties in the simulation of airflow in cities2013. 1st International Conference on Civil and Building Engineering Informatics (ICCBEI 2013), Tokyo, Japan, November 7-8, 2013.
Augmenting simulations with measurements: Application to building-scale wind-flow modeling2013. Computational Intelligence for Engineering Solutions (CIES), 2013 IEEE Symposium on, Singapore, April 16-19, 2013. p. 180-187. DOI : 10.1109/CIES.2013.6611747.
The effects of simplifications on model predictions and consequences for model-based data interpretation2012. 20th Analysis & Computation Specialty Conference, ASCE, Chicago, Illinois, USA, March 29-31, 2012.
Integrating the science of computing into undergraduate engineering curricula2012. Structures Congress, ASCE, Fairmont, Chicago, USA, March 29-31, 2012.
A Transformable Tensegrity-Ring Footbridge2012. IASS Symposium 2012: From Spatial Structures to Space Structures, Seoul, Korea, May 21-24, 2012.
A model-free data-interpretation approach for long-term monitoring of bridges2012. 6th International Conference on Bridge maintenance, Safety and Management, Stresa, Lake Maggiore, Italy, July 8-12, 2012.
A Hybrid Model-Free Data-Interpretation Approach For Damage Detection During Continuous Civil-Infrastructure Monitoring2012. ASCE International Conference on Computing in Civil Engineering, Clearwater Beach, FL, USA, June 17-20, 2012.
Reducing Uncertainties Regarding Remaining Lives of Structures Using Computer-aided Data Interpretation2012. 19th Workshop on Intelligent Computing in Engineering (EG-ICE), Herrsching, Germany, July 4-6, 2012.
A transformable tensegrity-ring footbridge2012. IASS-APCS 2012, Seoul, Korea, May 21-24, 2012.
Measurement system design for damage detection using model-free data interpretation methods2011. The 5th International Conference on Structural Health Monitoring of Intelligent Infrastructure (SHMII-5) 2011, Cancun, Mexico, December, 2011. p. 105.
Improving Computing Education for Engineers2011. World Engineers' Convention, Geneva, September 4-9, 2011.
Uncertainty corrrelation in structural performance assessment2011. 11th International Conference on Applications of Statistics and Probability in Civil Engineering, Zurich, Switzerland, August 2011.
Deployment of a Pentagonal Hollow-Rope Tensegrity Module2011. IABSE-IASS Symposium 2011: Taller, Longer, Lighter, London (UK), September 20-23, 2011.
Effects of service loading on the behaviour of a suspension bridge2011. The special Joint Annual Symposium of the International Association for Bridge and Structural Engineering (IABSE) and the International Association for Shell and Spatial Structures (IASS), London, UK, September 20-23, 2011.
Anomaly Detection without Structural Behavior Models2011. Structures Congress, Las Vegas, Nevada, USA, April 14-16, 2011.
Designing measurement systems for continuous monitoring of structures2011. EG-ICE Workshop, Enschede, Netherlands, July 6-8, 2011.
Performance of two model-free data interpretation methods for continuous monitoring of structures under environmental variations2011. ASCE International Workshop on Computing in Civil Engineering, Miami, FL, USA, June 19-22, 2011. p. 25-32.
Extended Uniform Distribution Accounting for Uncertainty of Uncertainty2011. International Conference on Vulnerability and Risk Analysis and Management/Fifth International Symposium on Uncertainty Modeling and Analysis, Maryland, USA, April, 2011. p. 78-85. DOI : 10.1061/41170(400)10.
Overcoming the limitations of traditional model-updating approaches2011. International Conference on Vulnerability and Risk Analysis and Management/Fifth International Symposium on Uncertainty Modeling and Analysis, Maryland, USA, April, 2011. p. p.905-913. DOI : 10.1061/41170(400)110.
Deployment analysis of a pentagonal tensegrity-ring module2011. CSMA 2011: 10e Colloque National en Calcul des Structures, Giens, France, May 9-13, 2011.
Active tensegrity structures with sliding cables - static and dynamic behaviour2011. CSMA 2011: 10e Colloque National en Calcul des Structures, Giens, France, May 9-13, 2011.
Deployment aspects of a tensegrity-ring pedestrian bridge2011. 2011 Structural Engineering World Conference, Como, Italy, April 4-6, 2011.
CMS4SI Structural Identification Approach for Interpreting Measurements2010. IABSE Symposium, Venice, 2010.
Predicting Usefulness of Measuring Structures during Load Tests2010. Structural Faults & Repairs, Edinburgh, 2010.
Structural identification through continuous monitoring: data cleansing using temperature variations2010. The International Conference on Computing in Civil and Building Engineering (ICCCBE) 2010 and the XVII Workshop on Intelligent Computing in Engineering (EG-ICE), Nottingham, UK, June 30- July 2, 2010. p. 447.
Configuration of Control System for an Adaptive Tensegrity Structure2010. ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Philadelphia, PA, USA, 2010.
Self-Repair of a Tensegrity Pedestrian Bridge through Grouped Actuation2010. The International Conference on Computing in Civil and Building Engineering (ICCCBE) 2010 and the XVII Workshop on Intelligent Computing in Engineering (EG-ICE), Nottingham, UK, 2010. p. 449.
Comparison of Two Active Control Strategies on a Tensegrity Structure2010. 1st EPFL Doctoral Conference in Mechanics, Advances in Modern Aspects of Mechanics, Lausanne, Switzerland, 2010. p. 15-19.
A process model for structural identification2009. 7th European Conference on Product and Process Modelling, Sophia Antipolis, FRANCE, Sep 10-12, 2008. p. 59-66.
Dynamic analysis and vibration control of an active tensegrity structure2009. 15th International Workshop on Dynamics and Control, CIMNE, Barcelona, Spain, June 1-3, 2009. p. 18-25.
Multiple-Model Structural IdentificationEncyclopedia of Structural Health Monitoring; Chichester, UK: Wiley, 2009. p. 2199-2208.
Data Mining : applications in civil engineeringVDM.
A control framework for a biomimetic structure2009. EUROPIA09, Paris. p. 153-172.
Estimation of modelling errors in structural system identification2009. SHMII-4, Zurich. p. 359.
Comparing two design strategies for tensegrity structures2009. EG-ICE Conference 2009, Berlin. p. 226-233.
Dynamic analysis and vibration control of an active tensegrity structure2009. 15th International Workshop on Dynamics and Control, Barcelona.
Considering sensor characteristics during measurement-system design for structural system identification2009. ASCE Computing Conference, Austin. p. 74-82.
Enhancing infrastructure management through advanced informatics2009. 12th Int. Conf CSEEC, Madeira.
Structural identification to improve bridge management2009. IABSE Symposium 2009, Bangkok, 2009.
Tensegrity modules for pedestrian bridges2009. IASS09 Symposium: Evolution and Trends in Design, Analysis and Construction of Shell and Spatial Structures, Valencia, Spain, 28 September - 2 October 2009. p. 504-505.
Analytical Modelling and Parameter Identification2008. Structures Congress, Vancouver.
Model-Based Reasoning for Life-Cycle Structural Engineering2008. 1st Int. Symp. on Life-Cycle Civil Engineering, Varenna, Italy. p. 959-964.
Damage Identification in Truss Bridges using Multiple Models2008. 15th Workshop of the European Group for Intelligent Computing in Engineering, U. of Plymouth, UK.
A comprehensive validity index for clusteringIntelligent Data Analysis. 2008.
A new system for early chloride detection in concreteSmart Materials and Structures. 2008. DOI : 10.1088/0964-1726/17/4/045017.
ASCE Global Center of Excellence in ComputingJournal Of Computing In Civil Engineering. 2007.
Civil Engineering Education in Switerland2007. 3rd Conference on Structural Health Monitoring and Intelligent Infrastructure, Vancouver, Canada, 2007.
A biomimetic structure2007. Innovation in the Built Environment, EPFL-LESO-PB, 2007.
Opportunities and Challenges of Structural Identification2007. ISHMII3, Vancouver, Canada, 2007.
Evaluting reliability of multiple-model system identification2007. Maribor, Slovenia. p. 643-652.
Measurement system design using damage scenarios2007. American Society of Civil Engineers, Reston, VA, USA, 2007. p. 615-623.
Optimal Sensor Placement for Damage Detection: Role of Global Search2007. 1st International Workshop on Decision Support in Structural Health Monitoring, Regensburg, Germany. p. 302-306.
System Identification: Data Mining to Explore Multiple Models2007. Conference on Structural Health Monitoring and Intelligent Infrastructure, Vancouver, Canada, 2007.
Incremental development of CBR strategies for computing project cost probabilitiesAdvanced Engineering Informatics. 2007. DOI : 10.1016/j.aei.2007.02.001.
System for monitoring the evolution of the thermal expansion coefficient and autogenous deformation of hardening materialsSmart Mater. Struct.. 2006. DOI : 10.1088/0964-1726/15/6/N01.
Improving Full-Scale Transmission Tower Design through Topology and Shape OptimizationJournal of Structural Engineering. 2006.
Challenges of data interpretation2006. Prague. p. 37-57.
Multiple-Model Updating to Improve Knowledge of Structural System Behavior2006.
A Course in Computer-Aided Engineering Fundamentals2006. Montreal, Canada.
Intelligent Computing in Engineering and Architecture2006. p. 692. DOI : 10.1016/j.aei.2007.08.004.
Outcomes of the Joint International Conference on Computing and Decision Making in Civil and Building Engineering2006. Montreal. p. 1-6.
Combining two data mining methods for system identification2006. p. 606-614.
Rational design of measurement systems using information science2006. Budapest. p. 118-119.
Data mining for decision support in multiple-model system identification2006. p. 2795-2800.
Model-free interpretation of monitoring data2006. p. 529-533.
Stratégies de recherche pour le génie civilTracés. 2006.
Learning, Self-Diagnosis and Multi-Objective Control of an Active Tensegrity Structure2006. p. 439-448.
Autonomous architecture proposal for summit science station in Greenland2006.
Self-aware and learning structure2006. p. 7-14.
An adaptable tensegrity structure for space exploration2006. Space Engineering and Science Institute, Los Alamos, USA. p. 218-223.
Model Identification of Bridges Using Measurement DataComputer-Aided Civil and Infrastructure Engineering. 2005.
Three-day prediction of concrete compressive strength evolutionACI materials J.. 2005.
Configuration of measurement systems using Shannon Bs entropy functionComputers & Structures. 2005.
System Identification through Model Composition and Stochastic SearchJ of Computing in Civil Engineering. 2005.
Multi-Model Interpretation of Measurement Data with Errors2005. Canada. p. 13-22.
Computing Beyond Computational Mechanics2005. Poland.
Sensors, Models and Videotape2005.
Data Mining for System Identification Support2005. Poland.
Supporting Engineers during System Identification2005.
Engineering Applications of a Direct Search Algorithm, PGSL2005.
Wind Tunnel Studies of an Active Structure2005. Poland.
Autonomous Architecture: Summit Station in Greenland Design Proposal as a Test-Bed for Future Planetary Exploration2005.
An active structure that learnsJ of Computing in Civil Engineering. 2005.
Multi-Objective Optimisation for Structural Control2005. Poland.
Multi-Objective Control of an Adaptive Tensegrity Structure2005. Salzburg. p. 279.
Serviceability control of an active tensegrity structure2005. Vienna University of Technology. p. S1-99-102.
Serviceability Control of an Intelligent Tensegrity Structure2005. Vienne, Autriche. p. 99-102.
Learning and Self-Diagnosis of a Tensegrity Structure2005. Columbia University, New York. p. 152-157.
Improving the reliability of system identification2004. p. 100-109.
An active structure that adapts and learns2004. p. 299-304.
Using entropy to maximize the usefulness of data collection2004. Bauhaus-Universität Weimar Universitätsverlag, Weimar, Germany. p. 52-53.
Mixing maths and cases2004. p. 13-21.
An intelligent spatial tensegrity structure2004. Montpellier. p. 120-122.
An Evolution of computer-aided engineering education2003. SOON, TU Delft, Delft, 2003.
Fundamentals of Computer-Aided EngineeringChichester, UK: Wiley.
A direct stochastic algorithm for global searchJ of Applied Mathematics and Computation. 2003.
Challenges, opportunities and risks of IT in civil engineering2003. p. 1-10.
From active to intelligent structures2003. p. 3-4.
Global search through sampling using a PDF2003. p. 71-82.
Vers des systèmes intelligents : l'exemple d'une structure active de type « tenségrité »Tracés. 2003.
Adjustable tensegrity structuresJournal of Structural Engineering. 2003.
Construction et caractérisation d'une structure active de type tensegritéRevue Française de Génie Civil. 2003.
A study of two stochastic search methods for structural controlJ of Computing in Civil Engineering. 2003.
Beyond simulation2002. IABSE Symposium , Melbourne, 2002. p. 32-33.
Lowering Costs of Timber Shear-Wall Design using Global SearchEngineering with Computers. 2002.
Structural monitoring using engineer-computer interactionAIEDAM. 2002. DOI : 10.1017/S0890060402163062.
Developing intelligent tensegrity structures with stochastic search2002. p. 21-40. DOI : 10.1016/S1474-0346(02)00003-4.
Decision support for system identificationFortschritt-Berichte. 2002.
Creation of flexible graphical user interfaces through model compositionAIEDAM. 2002. DOI : 10.1017/S0890060402163049.
Persistent knowledge through fundamentals2002. Denver. p. 25-27.
A methodology for model selection using measurements2002. London.
Computing Probabilities of costs using cases2002. American Society of Civil Engineers, Reston, VA, USA. p. 103-112.
Deux Structures Actives de Type TensegritéConstruction Métallique. 2002.
Towards Intelligent Tensegrity Structures2002. p. 449-455.
Simulating tensegrity systems with dynamic relaxation and neural networks2002. International Association for Bridge and Structural Engineering, Zurich. p. 84-85.
Using case-based reasoning to build intelligent structures2002. p. 102-111.
Performance Enhancement of Active Structures During Service Lives2002. Münich. p. 92-100.
Computational control for active structures2000. p. 1-8.
A course on the fundamentals of computer-aided engineering2000. p. 681-685.
Enabling Performance Based Structural Engineering2000. Structural Engineering for Meeting Urban Transportation Challenges, Congress Report 16, IABSE, Lucerne, Lucerne.
The impact of new measurement systems on structural engineering2000. Oxford. p. 1-14.
Decision support through multiple models and probabilistic search2000. Icelandic Building Research Institute, Reykjavik. p. 765-779.
A probabilistic search algorithm for finding optimally directed solutions2000. Icelandic Building Research Institute, Reykjavik. p. 708-721.
Increasing Understanding During Collaboration Through Advanced RepresentationsJournal of Information Technology in Construction. 2000.
Constraint-based support for negotiation in collaborative designArtificial Intelligence in Engineering. 2000. DOI : 10.1016/S0954-1810(00)00020-0.
Towards Monitoring of Dynamic Deformations in Civil Structures using SOFO Sensors2000. Lugano. p. 485-491.
Development of an ‘optical hair’ hygrometer: a novel way to measure humidity using fibre optics2000. Lugano. p. 467-474.
Structural Engineering Design Support by Constraint Satisfaction2000. p. 311-331.
Integrated information technology for structural engineersStructural Engineering International. 1999. DOI : 10.2749/101686699780482168.
An interactive toolkit for structural monitoring1999. p. 189-198.
Extending active control to build intelligent structures1999. Rio de Janeiro. p. 1057-1064.
Performance-based Structural Engineering1999. p. 63-73.
A task and software independent CAE course1999. p. 39-46.
Development of an undergraduate course on the fundamentals of CAE1999. London. p. 153-156.
Applying Shape Annealing to Full-Scale Transmission Tower Re-Design1999. Las Vegas, NV. p. 1-9.
Managing assumptions and models for evaluations of existing structures1999. p. 231-234.
Constraint solving and preference activation for interactive designArtificial Intelligence for Engineering Design Analysis and Manufacturing, Cambridge University Press. 1998.
Augmented reality applications to structural monitoring1998. Heidelberg. p. 479-483.
Structural monitoring: Decision support through multiple data interpretations1998. Heidelberg. p. 474-478.
Intelligent structures: A new direction in structural control1998. Heidelberg. p. 398-410.
Case-based model selection for engineering diagnosis1998. p. 112-125.
Finding the right model for bridge diagnosis1998. Heidelberg. p. 308-19.
A Fatigue Primer for Structural EngineersNational Steel Bridge Alliance, American Institute of Steel Construction.
Constraint Techniques for Collaborative Design1998. p. 34-41.
Supporting abductive tasks1997. Tampere, Finland. p. 87-94.
Abductive engineering support1997. p. 1361-1370.
Computer supported design : Empowering or Inhibiting ?1997. Tampere, Finland. p. 1-8.
CADRE: Case-based geometric designArtificial Intelligence in Engineering. 1996. DOI : 10.1016/0954-1810(95)00026-7.
Implementation and Evaluation of a WWW multiple choice question server1996. p. 228-235.
Support for spatial configuration tasks1996. Univerisity of Strathclyde. p. 1-8.
Augmenting design interaction and communication using IDIOM1996. p. 467-478.
Interactive design1996. Edinburgh. p. 23-30.
Dynamic constraint satisfaction with conflict management in design1996. p. 237-251.
Taking advantage of design process models1995. p. 87-96.
Spatial composition using cases: IDIOM1995. p. 88-97.
Resolving conflicts as knowledge evolves1995. Rotterdam. p. 191-197.
Case combination and adaptation of building spaces1995. p. 155-162.
Knowledge representation for preliminary stages of engineering tasksKnowledge Based Systems, Butterworth-Heinemann. 1994.
Case-based preliminary building designJournal of Computing in Civil Engineering, ASCE. 1994.
Spatial design of complex artifacts using cases1994.
Strategies for conflict management in preliminary engineering design1994.
Incremental spatial parameterisation through combination of intelligent objects1994.
Prototype to product - challenges and frustrations1994.
Designers like designing1994. Carnegie Mellon University.
An aid for fatigue resistant design1994. Lausanne.
Models of design processes1994. Lausanne.
Structural and architectural integration in building design Advances and chalenges in case-based design1994. Lausanne.
Integrated case-based building design1994.
Assumptions and conflict resolution in preliminary engineering design1994.
Assumptions and conflict resolution in preliminary engineering design1993.
Targeting novices and expertsJournal of Design Sciences and Technology. 1993.
Integrated case-based design systems1993. Beijing.
Implementing qualitative reasoning for structural design using constraint propagation1993.
Representing incomplete knowledge with assumptions1993. Beijing.
Incremental modification methods for design1992. p. 102-105.
The combination of independently developed expert systems1992.
Functional context and creativity1992. Heron Island, Australia.
Adaptation of spatial design cases1992. Pittsburg.
Dynamic Constraint Satisfaction with Continuous Variables1992.
Methods for improving the performance of design systems1991. p. 467-483.
The fatigue-resistant designer1991.
Contributing knowledge to a large integrated system1991. p. 77-85.
Non-monotonic reasoning : methods which show potential for large systems1991.
Research Tools or Design Aids?Structural Engineering International. 1991.
Case-based representation of architectural design knowledge1991. Sydney.
Multi-actor issues in Euroweld : an integrated system containing 12 independently developed Knowledge modules1991. Aix-les-Bains.
Modelling knowledge for preliminary bridge design1990. p. 38-46.
Crack control : Decision making aided by knowledge processing technology1990. Lausanne.
Dynamic constraint satisfaction in a bridge design system1990. p. 217-232.
Knowledge-based systems for structures in service1989. IABSE, Bergamo, 1989. p. 129-139.
Les systèmes expertsIngénieurs et architectes suisses. 1989.
Fatigue-resistant steel bridgesJournal of Constructional Steel Research. 1989. DOI : 10.1016/0143-974X(89)90055-2.
An analysis of fatigue recommendations considering new dataPeriodica AIPC. 1989.
Fatigue assessment and fracture mechanics in structural engineeringStructures Subjected to Repeated Loading; Elsevier, 1989. p. 1-24.
Fatigue and fracture of riveted bridge membersJournal of Structural Engineering, ASCE. 1989.
Knowledge-base systems for structures in service1989. Zurich.
Default-reasoning in a bridge design system1989. IFIP, Osaka.
Effet de contraintes résiduelles sur le comportement de fissures de fatigue dans un assemblage soudé et traitéConstruction métallique. 1988.
Computer-aided fatigue design of steel structures1988. p. 267-274.
Fatigue design of steel bridges1988. p. 9/1-9/11.
Détermination de la profondeur et de la contrainte d'ouverture de fissures de fatigue dans des assemblages soudés1988. Lyon. p. 45-54.
Determination of safety factors for fatigue assessments1987. p. 371-378.
Fatigue reliability : ECCS safety factorsJournal of Structural Engineering, ASCE. 1987.
Applying fatigue research to engineering design1986. The Behaviour of Short Fatigue Cracks, 1986. p. 15-26.
Concepts du dimensionnement à la fatigueIngénieurs et architectes suisses. 1986.
ECCS Fatigue design recommendationsWelding Technology for Canada, Welding Institute of Canada. 1986.
Fracture mechanics in structural engineering1986. p. 381-402.
Fatigue design concepts for structural engineers1985. Salt Lake City, USA. p. 547-555.
Cinq traitements visant à augmenter la résistance à la fatigue d'assemblages soudésTechnica. 1985.
Modèles de prévision et amélioration de la durée de vie d'éléments en acier soudésMaterial + Technik. 1985.
A review of fatigue strength improvement methodsRevue canadienne de génie civil. 1985.
Detection and measurement of fatigue cracks in welded joints1985. p. 789-795.
Changes in the fatigue life of welded attachments due to geometrical effectsThe Welding Journal, The American Welding Society. 1985.
Residual stresses and fatigue strength improvement of welded connections1985. GB.
Fatigue design conceptsPériodica AIPC. 1984.
Erhöhung der Ermüdungsfestigkeit geschweisster VerbindungenMaterial + Technik. 1984.
Fatigue thresholds and improvement of welded connections1984. p. 1773-1782.
Steel fatigue1984. Essen, Germany.
Detection and measurement of fatigue cracks in fillet welded joints1984. p. 789-795.
Crack growth in a fillet welded jointEngineering Fracture Mechanics. 1983.
Closure behaviour of surface cracksFatigue and Fracture of Engineering Materials and Structures. 1983.
Defects and crack shape development in fillet welded jointsFatigue and Fracture of Engineering Materials and Structures. 1982.
Measuring fatigue cracks in fillet welded jointsInternational Journal of Fatigue. 1982. DOI : 10.1016/0142-1123(82)90019-6.
Advances in defect assessment for fatigueMetal Construction. 1982.
Fatigue life prediction of welded components based on fracture mechanicsJournal of Testing and Evaluation, ASTM. 1980.
Enseignement & Phd