Jamasp Jhabvala
EPFL STI IMX LMTM
MC A1 218 (Bâtiment MC)
Rue de la Maladière 71b, CP 526
CH-2002 Neuchâtel 2
Travail en cours
2016-... : Post doc at Laboratory of Thermomechanical Metallurgy (LMTM-EPFL). Research on the Selective Laser Melting process.
2010-2015: Additive manufacturing consultant EPFL + industry
Implementation of the Selective Laser Melting process in an industrial environment. Link between LGPP lab at EPFL and industry.
Biographie
2010: PhD thesis at LGPP (Laboratoire de Gestion et de Procédés de
Production) at EPFL
2003: Master degree in Material Science at LC (Laboratoire de
Céramiques) at EPFL
Compétences
Additive Manufacturing
Selective Laser Melting
3D Printing
Material Science
Powder Processing
Solidification
Thermal Simulations
Non destructive testing methods
Selective Laser Melting
3D Printing
Material Science
Powder Processing
Solidification
Thermal Simulations
Non destructive testing methods
Publications
Autres publications
| J.Jhabvala, E.Boillat, R.Glardon Rapid Prototyping Journal, Vol. 19 Iss: 2, 2013 |
Study of the inter-particle necks in Selective Laser Sintering |
| Jamasp Jhabvala, Eric Boillat, C�dric Andr� and R�my Glardon The International Journal of Advanced Manufacturing Technology, Volume 59, pages 137-142. Springer 2012. |
An innovative method to build support structures with a pulsed laser in the selective laser melting process |
| Jamasp Jhabvala, Eric Boillat and R�my Glardon Gold Bulletin, Volume 44, june 2011. Springer 2011. |
On the use of EBSD analysis to investigate the microstructure of gold samples built by selective laser melting |
| J.Jhabvala, E.Boillat and R.Glardon Virtual and Physical Prototyping, Volume 5, Issue 2, June 2010, pages 99-109. Taylor and Francis, 2010. |
On the effect of scanning strategies in the selective laser melting process |
| J.Jhabvala Th�se EPFL, no 4609 (2010). Dir.: R�my Glardon, Eric Boillat |
Study of the consolidation process under macro- and microscopic thermal effects in selective laser sintering and selective laser melting |
| J.Jhabvala, T.Antignac, E.Boillat, and R.Glardon Innovative developments in design and manufacturing, Advanced Research in Virtual and Rapid Prototyping. Taylor and Francis, 2009. |
Study and simulation of different scanning strategies in SLM. |
| J.Jhabvala, M.Da fflon, E.Boillat, and R.Glardon Virtual and Rapid Manufacturing, Advanced Research in Virtual and Rapid Prototyping, pages 553-558. Taylor and Francis, 2007. |
Infl uence of the process parameters on the liquid bridges between particles in SLS. |