John Botsis

EPFL STI IMX-GE
ME C1 409 (Bâtiment ME)
Station 9
CH-1015 Lausanne

EPFL STI IGM-GE
ME C1 409 (Bâtiment ME)
Station 9
CH-1015 Lausanne

EPFL STI IGM LMAF
ME C1 409 (Bâtiment ME)
Station 9
CH-1015 Lausanne

Unité: SGM-ENS

Unité: SMX-ENS

perm_contact_calendarvCard
Données administratives

Publications

Autres publications

C. BLONDEAU, G. PAPPAS & J. BOTSIS
Composite Structures, 216, 2019, pp. 464–476
Influence of ply-angle on fracture in anti-symmetric interfaces of CFRP laminates
F. NAYA, G. PAPPAS & J. BOTSIS
Composite Structures, 210, 2019, pp. 877–891
Micromechanical study on the origin of fiber bridging under interlaminar and intralaminar mode I failure
R. AMACHER, J. CUGNONI, S. KOHLER, J. BRUNNER, E. KRAMER, C. DRANSFELD, W. SMITH, K. SCOBBIE, L. SORENSEN & J. BOTSIS, ‘
Composites Science and Technology, 168, 2018, pp. 467-477.
Towards Aerospace Grade thin-Ply Composites: Effects of ply thickness, Fibre, Matrix and Interlayer Toughening on Strength and Damage Tolerance
L. P. CANAL, M. ALFANO & J. BOTSIS
Composites Science and Technology, 139, 2017, pp. 90-98.
A multi-scale based cohesive zone model for the analysis of thickness scaling effects in fiber bridging
L. P. CANAL, G. PAPPAS & J. BOTSIS
Composites Science and Technology, 126, 2016, pp. 52-59.
Large scale fiber bridging in mode I intralaminar fracture. An embedded cell approach
G. PAPPAS & J. BOTSIS
International Journal of Solids and Structures, 85-86, 2016, pp. 114-124.
Intralaminar fracture of unidirectional carbon/epoxy composite: experimental results and numerical analysis
G. PAPPAS, L. P. CANAL & J. BOTSIS
Composites Part A, 91, 2016, pp. 117–126.
Characterization of intralaminar mode I fracture of AS4/PPS composite using inverse identification and micromechanics
E. FARMAND-ASHTIANI, D. ALANIS, J. CUGNONI & J. BOTSIS
Composites Science and Technology, 119, 2015, pp. 85-92.
Delamination in cross-ply laminates: Identification of traction-separation relations and cohesive zone modeling
E. FARMAND-ASHTIANI, J. CUGNONI & J. BOTSIS,
International Journal of Solids and Structures, 55, 2015, pp. 58–65.
Specimen thickness dependence of large scale fiber bridging in mode I interlaminar fracture of carbon epoxy composite
R. AMACHER, J. CUGNONI, J. BOTSIS,, L. SORENSEN, W. SMITH & C. DRANSFELD
Composites Science and Technology, 101, 2014, pp. 121–132.
Thin Ply Composites: An Experimental Characterization of the Size Effect
B. D. MANSHADI, A. P. VASSILOPOULOS & J. BOTSIS
Composites Science and Technology, 83, 2013, pp. 32�39.
A combined experimental/numerical study of the scaling effects on mode-I delamination of GFRP
J. FRIEDEN, J. CUGNONI, J. BOTSIS & TH. GM�R
Composite Structures, 94, 2012, pp. 438�445
Low energy impact damage monitoring of composites using dynamic strain signals from FBG sensors - Part I: Impact detection and localization
G. FROSSARD, J. CUGNONI, T. GMÜR & J. BOTSIS
Composites Part A, 91, 2016, pp.1-8.
Mode I Interlaminar Fracture of Carbon Epoxy Laminates: Effects of Ply Thickness
E. FARMAND-ASHTIANI, J. CUGNONI & J. BOTSIS,
Composites Science and Technology, 137, (2016), pp. 52-59.
Effects of large scale bridging in load controlled fatigue delamination of unidirectional carbon-epoxy specimens
J. FRIEDEN, J. CUGNONI, J. BOTSIS & TH. GM�R
Composite Structures, 94, 2012, pp. 593�600.
Low energy impact damage monitoring of composites using dynamic strain signals from FBG sensors - Part II: Damage identification
S. STUTZ, J. CUGNONI & J. BOTSIS
Composites Science and Technology, Vol. 71, 2011, pp. 443-449.
Studies of mode I delamination in monotonic and fatigue loading using FBG wavelength multiplexing
L. SORENSEN, J. BOTSIS, TH. GM�R & L. HUMBERT
Composites Science & Technology, Vol. 68, 2008, pp. 2350-2358.
Bridging tractions in mode-I delamination: measurements & simulations
G. PAPPAS, S. JONCAS, V. MICHAUD, & J. BOTSIS
Composite Structures, 184, 2018, pp 924-934
The Influence of Through-Thickness Reinforcement Geometry and Pattern on Delamination of Fiber-Reinforced Composites: Part I - Experimental results
G. PAPPAS, S. JONCAS, V. MICHAUD & J. BOTSIS
Composite Structures, 181, 2017, pp. 379-390
The Influence of Through-Thickness Reinforcement Geometry and Pattern on Delamination of Fiber-Reinforced Composites: Part II - Modelling