Thierry Meyer
Maître d'enseignement et de recherche
thierry.meyer@epfl.ch +41 21 693 36 14 http://gscp.epfl.ch/
Nationalité: Suisse
EPFL SB ISIC GSCP
CH H2 595 (Bâtiment CH)
Station 6
1015 Lausanne
Web site: Site web: https://gscp.epfl.ch
EPFL SB ISIC GSCP
CH H2 595 (Bâtiment CH)
Station 6
1015 Lausanne
Web site: Site web: https://www.epfl.ch/schools/sb/scgc/
EPFL SB ISIC LPDC
CH H2 595 (Bâtiment CH)
Station 6
1015 Lausanne
Web site: Site web: https://lpdc.epfl.ch
Domaines de compétences
Gestion des risques
Analyses de risques
Fluides surcritiques
Calorimétrie de réaction
Procédés de polymérisation
Génie chimique
Analyses de risques
Fluides surcritiques
Calorimétrie de réaction
Procédés de polymérisation
Génie chimique
Mission
Le Groupe de sécurité chimique et physique fait partie de l'Institut des sciences et ingénierie chimiques de la faculté des sciences de base de l'EPFL.La recherche du GSCP se concentre sur le risk management et gestion de la sécurité.
Nous traitons des thèmes de recherche suivants :
i) Méthodologies de gestion des risques (Risk assessment and management)
ii) Sécurité des processus de recherche en chimie et physique
Biographie
Originaire de Genève, né en 1961, Thierry Meyer reçoit en 1986 son diplôme (MSC) dingénieur chimiste de lEcole Polytechnique Fédérale de Lausanne (EPFL). Il reçoit en 1989 son doctorat (PhD) à EPFL pour sa thèse sur le micromélange dans des milieux fortement visqueux. Il rejoint l'institut du génie chimique de 1989 jusqu'à 1993 en tant que scientifique senior dans le domaine des réactions de polymérisation.Il entre, en 1994, à la division " Pigments " de Ciba-Geigy SA, où il travaille au développement et à la mise en production de plusieurs pigments de hautes performances. Il assume la fonction de chef de projets pour l'introduction de nouveaux pigments en fabrication. En 1997, il est nommé chef de fabrication pour la production de la division pigments de Ciba Spécialités Chimiques SA à Monthey. Il est pendant cette même période nommé chargé de cours à l'EPFL.
Retournant à l'institut du génie chimique d'EPFL à Lausanne vers la fin de 1998, il a été nommé « d'enseignement de maître et de recherche » (MER) pour mener un nouveau groupe de recherche dans le domaine des polymères et les fluides supercritiques, et enseigner aux chimistes, ingénieurs chimistes et en sciences des matériaux, les disciplines telles que le développement de procédés, l'introduction au génie chimique, le chimie organique et des polymères au programme de bachelor et master.
En 2005 il assume la responsabilité du service de Sécurité et Santé au Travail de la faculté des sciences de base en plus de ses activités de recherches traitant de la gestion des risques (risk management) et des fluides supercritiques. Il enseigne actuellement l'introduction au génie chimique au niveau bachelor, le risk management au niveau master et des cours de formation continue dans le domaine de la sécurité (safety) et de la gestion des risques (engineering risk management).
Il agit également comme consultant et expert en matière de risk management et génie chimique auprès du tribunal de l'ICC (chambre de commerce internationale) du World Business Organization, auprès de plusieurs bureaux d'études et de consultants ainsi quauprès dindustries.
Thierry Meyer est actuellement membre de plusieurs associations internationales de la fédération Européenne du génie chimique et de la société chimique Américaine et American Institute of Chemical Engineers. Il a été élu Président de la European Working Party on Polymer Reaction Engineering de 2001 jusqu'à 2006. Il est actuellement le représentant académique Suisse dans la European Working Party on Loss Prevention and Safety Promotion et dans la European Working Party on Education.
Il est membre de plusieurs editorial boards: Chemical Engineering Research and Design, Macromolecular Reaction Engineering, Chemical Engineering and Technology, Journal of Chemical Health and Safety.
Autre site Web
http://scc.epfl.ch/Publications
Publications Infoscience
Publications
2023
Safety climate in university laboratories. Part II: a critical view on the role of safety education in academia
International Journal of Reliability and Safety. 2023. DOI : 10.1504/IJRS.2023.135675.Safety climate in university laboratories. Part I: model development and practical application
International Journal of Reliability and Safety. 2023. DOI : 10.1504/IJRS.2023.135676.The need for awareness and action in managing nanowaste
Nature Nanotechnology. 2023-03-03. DOI : 10.1038/s41565-023-01331-4.Safety risk management in University laboratories
Lausanne, EPFL, 2023. DOI : 10.5075/epfl-thesis-9168.2022
Safety management of chemical laboratories
2022-06-03Mise en oeuvre d’une gestion du risque en entreprise 2.0
2022-08-19Cartographie et optimisation des processus de lavage
2022-08-26Quantum-based approach for laboratory risk assessment and decision-making
2022-05-20The importance/role of education in chemical engineering
Chemical Engineering Research and Design. 2022-09-10. DOI : 10.1016/j.cherd.2022.08.061.Safety Decision-Making for Laboratory Processes in Academia
Chemical Engineering Transactions. 2022. DOI : 10.3303/CET2290121.2021
NanoSafe III: A User Friendly Safety Management System for Nanomaterials in Laboratories and Small Facilities
Nanomaterials. 2021. DOI : 10.3390/nano11102768.Flavor binding and release from vegan meat substitutes
2021Human skin permeation of nickel, lead and silver nanoparticles solutions
2021Asclepios : Risk Analysis of RedMars
2021Managing chemical incompatibilities - ChemIncomp
2021Management of nanomaterial hazards
2021Coexistence of reactive functional groups at the interface of a powdered activated amorphous carbon: a molecular view
Molecular Physics. 2021-08-20. DOI : 10.1080/00268976.2021.1966110.Semi-quantitative Model for Risk Assessment in University Laboratories
2021-01-26. 4th International Conference on Intelligent Human Systems Integration (IHSI), Palermo, Italy, February 22-24, 2021. p. 323-329. DOI : 10.1007/978-3-030-68017-6_48.2020
Hazard Perception in University Laboratories
2020Gas Leak in a Laboratory Environment: an Experimental and Numerical Simulation Comparison
2020Third-Generation Solar Cells: Toxicity and Risk of Exposure
Helvetica Chimica Acta. 2020-08-20. DOI : 10.1002/hlca.202000074.Safety Decision-Making in Academia
2020-07-01. 11th International Conference on Applied Human Factors and Ergonomics (AHFE 2020), San Diego, CA, USA, 16-20 July, 2020. p. 10-17. DOI : 10.1007/978-3-030-50946-0_2.Efficient management of nanomaterial hazards in a large number of research laboratories in an academic environment
Safety Science. 2020. DOI : 10.1016/j.ssci.2019.09.004.2019
Safety In Research Institutions: How to Better Communicate the Risks using Numerical Simulations
Chemical Engineering Transactions. 2019. DOI : 10.3303/CET1977146.Measuring the Safety Climate of Academic Laboratories to Improve Safety Behaviours
Chemical Engineering Transactions. 2019. DOI : 10.3303/CET1977046.Managing Risks when Using Nanomaterials in Research
Chemical Engineering Transactions. 2019. DOI : 10.3303/CET1977011.Risk & Decision Making in Research Environment
2019. ECCE12, Florence, Italie, September 15-19, 2019.Safety management of nanomaterials in research labs
2019. International Congress on Advanced Material Sciences and Engineering 2019, Osaka, Japan, July 22-24, 2019. p. 136.Optimal barrier management of evacuation decision in chemical cluster
2019Safety assessment in cosmetics: Health and Environmental hazard analysis of sunscreen components
2019Risk Management in an Academic Environment: Safety Measures and Risk Propagation
20192018
Use of numerical simulation as an educational tool to improve safety in research institutions
2018. CHISA, Prague, August 25-29, 2018.Risk Management in an Academic Environment: Safety Measures and Risk Propagation
2018Resource allocation for risk management in academia
2018Less toxic chemistry: the keys to substitution
2018La gestion des dangers appliquée aux produits cosmétiques
2018Amélioration de la culture sécurité dans les laboratoires académiques à l'EPFL
2018Exposure and hazard assessment of engineered nanoparticles present at Singapore workplaces
2018Cyclic Hypervalent Iodine Reagents for Azidation: Safer Reagents and Photoredox-Catalyzed Ring Expansion
The Journal of Organic Chemistry. 2018-09-15. DOI : 10.1021/acs.joc.8b02068.Parameters affecting thermal risk through a kinetic model under adiabatic condition: Application to liquid-liquid reaction system
Thermochimica Acta. 2018-05-28. DOI : 10.1016/j.tca.2018.05.024.2017
Towards an Efficient Safety Education System to Manage Risks in Laboratories
2017. 10th World Congress of Chemical Engineering, Barcelona, October 1th-5th, 2017.Risk assessment and education strategies for nanotechnology researchers
2017. Swiss nano Convention, Zürich, June 1st, 2017.Engineered nanomaterials: toward effective safety management in research laboratories
2017. Nano Delivery 2017 Conference, Osaka, Japan, May 29-31, 2017.Characterization of foaming properties of a clathrate ice slurry in a high pressure loop
2017Introduction of 5S at EPFL
2017A systematic approach for thermal stability predictions of chemicals and their risk assessment: Pattern recognition and compounds classification based on thermal decomposition curves
Process Safety And Environmental Protection. 2017. DOI : 10.1016/j.psep.2017.02.017.Accumulation in fed-batch reactor with multiple reaction scheme
Lausanne, EPFL, 2017. DOI : 10.5075/epfl-thesis-7259.Reactor Dynamics Investigation Based On Calorimetric Data
2017. European Workshop on Process Safety and Loss Prevention at 10th European Congress of Chemical Engineering (ECCE) / 3rd European Congress of Applied Biotechnology (ECAB) / 5th European Process Intensificatiion Conference (EPIC), Nice, FRANCE, SEP 27-OCT 01, 2015. p. 231-240. DOI : 10.1002/cjce.22700.Towards the implementation of a safety education program in a teaching and research institution
Education for Chemical Engineers. 2017. DOI : 10.1016/j.ece.2015.06.003.2016
Engineered nanomaterials: toward effective safety management in research laboratories
2016. 11th Int. Particle Toxicology Conference, Singapore, September 26-30, 2016.Education and management in using especially hazardous chemicals in a research and teaching institution
2016. 22nd International Congress of Chemical and Process Engineering CHISA, Prague, Czech Republic, August 27-31, 2016.Étude de faisabilité des indicateurs en sécurité dans le milieu académique
2016Interpolation réacteurs industriels d'hydrogénation
2016Assessment of a Hydrogen Supply Chain and Evaluation of the Societal Risk Using Discrete Event Simulation
2016Thermal Stability Predictions for Inherently Safe Process Design Using Molecular-Based Modelling Approaches
2016. 15th International Symposium on Loss Prevention and Safety Promotion, Freiburg, GERMANY, JUN 05-08, 2016. p. 517-522. DOI : 10.3303/CET1648087.Thermal Process Safety Based on Reaction Kinetics and Reactor Dynamics
2016. p. 19-24. DOI : 10.3303/CET1648004.Joint applicability test of software for laboratory assessment and risk analysis
Journal of Loss Prevention in the Process Industries. 2016. DOI : 10.1016/j.jlp.2015.12.026.Using very toxic or especially hazardous chemical substances in a research and teaching institution
Safety Science. 2016. DOI : 10.1016/j.ssci.2016.04.019.Engineered nanomaterials: toward effective safety management in research laboratories
JOURNAL OF NANOBIOTECHNOLOGY. 2016. DOI : 10.1186/s12951-016-0169-x.Predictive Models for Thermal Stability and Explosive Properties of Chemicals from Molecular Structure
Lausanne, EPFL, 2016. DOI : 10.5075/epfl-thesis-6970.2015
Molecular Structure Based Predictive Models for Thermal Stability of Chemicals
2015. AIChE Annual Meeting, Salt Lake City, USA, November 8-13, 2015.Renewable resource based polymers
2015Synthesis of cyclic (ethylene furanoate) oligomers via reactive distillation for ring opening polymerization
2015Machine learning for thermal decomposition prediction from group contribution
2015Predictive Models for Thermal Behavior of Chemicals with Quantitative Structure-Property Relationships
Chemical Engineering & Technology. 2015. DOI : 10.1002/ceat.201400548.Analyse thermique et structure moléculaire
2015Research and developments-where people are exposed to nanomaterials
Journal of occupational heath. 2015. DOI : 10.1539/joh.14-0189-FS.Predicting thermal behavior of chemicals from molecular structure
2015. 2015 Spring meeting and 11th Global Congress on Process Safety, Austin, Texas, 26-30 April.Reaction Kinetic Investigation and scale-up evaluation based on calorimetric data
2015. 10th European Congress of Chemical Engineering, Nice, France, September 27-October 1st, 2015.Thermal stability predicted from group contribution method
2015. 10th European Congress of Chemical Engineering, Nice, France, September 27-October 1st, 2015.Enhancement and application of a risk assessment technique for research and teaching laboratories
Lausanne, EPFL, 2015. DOI : 10.5075/epfl-thesis-6478.2014
Improvement and development of tools to respect the policy of special waste’s management of the FSB of the EPFL
2014Autorisation d’utilisation de substances chimiques très toxiques et/ou dangereuses à la faculté des sciences de base de EPFL
Archives des Maladies Professionnelles et de l'Environnement. 2014. DOI : 10.1016/j.admp.2014.03.179.Kinetic identification and risk assessment based on non-linear fitting of calorimetric data
2014. 10th Global Congress on Process Safety, New Orleans, Louisiana, USA, March 30-April 2.Feed optimization using kinetic model and scale-down approach
2014. STK annual meeting, Fribourg, Switzerland, June 5.Is safety education necessary in research and teaching institutions?
2014. 21st International Congress of Chemical and Process Engineering (CHISA), Prague, Czech Republic, 23-27 August.Predictive models for thermal behavior of chemicals
2014. 21st International Congress of Chemical and Process Engineering (CHISA), Prague, Czech Republic, 23-27 August.Joint applicability test of software for laboratory assessment and risk analysis
2014. 24 th European Safety and Reliability Conference, ESREL 2014, Wroclaw, Poland, 14-18 September.FH HES Optimization of Chemical Reactor Feed by Simulations Based on a Kinetic Approach
Chimia. 2014. DOI : 10.2533/chimia.2014.746.2013
Expert Judgements in Risk Analysis: a Strategy to Overcome Uncertainties
2013. 14th EFCE Symposium on Loss Prevention and Safety Promotion, Florence, Italy, 12-15 May.Quantitative Structure-Property Relationships for Thermal Stability and Explosive Properties of Chemicals
2013. 14th EFCE Symposium on Loss Prevention and Safety Promotion, Florence, Italy, 12-15 May.Autorisation d'utilisation de substances chimiques très toxiques et/ou dangereuses à la Faculté des Sciences de Base de l'EPFL
2013. 25èmes journées franco-suisses de santé au travail, Lyon, France, 14 June.Nanomaterials safety management in research environment
2013. 7th Applied Biosafety Meeting, Zurich, Switzerland, September 5.Concerns related to Safety Management of Engineered Nanomaterials in research environment
2013. 3rd International Conference on Safe Production and Use of Nanomaterials (Nanosafe), Grenoble, France, November 13-15, 2012. p. 012065. DOI : 10.1088/1742-6596/429/1/012065.Expert Judgements in Risk Analysis: a Strategy to Overcome Uncertainities
Chemical Engineering Transactions. 2013. DOI : 10.3303/CET1331052.Quantitative Structure-Property Relationships for Thermal Stability and Explosive Properties of Chemicals
Chemical Engineering Transactions. 2013. DOI : 10.3303/CET1331141.Engineering risk management
Germany: De Gruyter Graduate.A systematic tool for Assessment and Classification of Hazards in Laboratories (ACHiL)
Safety Science. 2013. DOI : 10.1016/j.ssci.2012.10.001.2012
How to Apply Nanomaterials Safety Management in a Research Environment ?
2012. BIT's 3rd Annual World Congress of NanoMedicine, Shenzhen, China, November 1-3, 2012. p. 129.Le concept d'autorisation d'utilisation de substances chimiques particulièrement dangereuses et/ou toxiques
2012. GRMHST, La Neuveville, Switzerland, 15 November.How to apply nanomaterials safety management in a reserch environment?
2012. BIT's 3rd Annual World Congress of Nanomedicine, Shenzen, China, 1-3 November.How about safety and risk management in research education?
2012. 20th International Congress of Chemical and Process Engineering CHISA, Prague, Czech Republic, 25-29 August.Safety management of nanomaterials
2012. 20th International Congress of Chemical and Process Engineering, CHISA, Prague, Czech Republic, 25-29 August.How to manage nanomaterials safety in research environment?
2012. 20th Annual International Conference on Composites or Nano Engineering ICCE-20, Beijing, China, July 22-28.Das Sicherheitskonzept in den Forschungs-und Schulungslaboratorien
2012. Wissens-Forum 2012 Brandschutz und Arbeitssicherheit, MediaSec AG, Zurich, Switzerland, 8 May.Safety Management of Nanomaterials
Procedia Engineering. 2012. DOI : 10.1016/j.proeng.2012.07.552.How About Safety and Risk Management in Research and Education?
Procedia Engineering. 2012. DOI : 10.1016/j.proeng.2012.07.478.Risk analysis in research environment
Journal Of Risk Research. 2012. DOI : 10.1080/13669877.2011.634513.2011
Feasibility Study on the Prediction of Thermal Stability of Chemicals
2011Sicherheitskonzept in den Forschungs-und Schullaboratorien
2011. SSPS/VBSF meeting, Olten, Switzerland.Safety management of nanomaterials
2011. 8th. European Congress of Chemical Engineering, Berlin, Germany, Sept 25-29.Risk analysis in research environment
2011. 8th. European Congress of Chemical Engineering, Berlin, Germany, Sept 25-29.LARA-Méthodologie et Outil de Gestion des Risques en Milieu Académique et de Recherche
2011. XXIVèmes jJournées franco-suisse de santé et sécurité au travail, Fribourg, Switzerland, 16-17 juin.How to manage nanomaterials safety in research environment
2011. INRS NANO 2011, Nancy, France, 5-7 avril.Preventive identification of chemical hazards in laboratories
2011Safety Management and Risk Assessment in Chemical Laboratories
Chimia. 2011. DOI : 10.2533/chimia.2011.734.Gestion des risques pour les laboratoires de recherche et d'enseignement
Lausanne, EPFL, 2011. DOI : 10.5075/epfl-thesis-5108.Risk analysis in research environment - Part I: Modeling Lab Criticity Index using Improved Risk Priority Number
Safety Science. 2011. DOI : 10.1016/j.ssci.2011.02.006.Risk analysis in research environment - Part II: Weighting Lab Criticity Index using the Analytic Hierarchy Process
Safety Science. 2011. DOI : 10.1016/j.ssci.2010.12.011.2010
Hybrid approach for risk identification in research milieu
2010. 13th international symposium on loss prevention and safety promotion in the process industries, Bruges, Belgium, June 6-9, 2010. p. 447-450.Risk management practices for safe handling of nanomaterials in research laboratories
2010. 2nd NanoImpactNet Conference, Lausanne, Switzerland, March 9-12, 2010.Management of nanomaterials safety in research environment
Particle And Fibre Toxicology. 2010. DOI : 10.1186/1743-8977-7-40.2009
Particle exposure scenarios for research and production activities involving nanomaterials
American Journal of Respiratory and Critical Care Medicine. 2009. DOI : 10.1164/ajrccm-conference.2009.179.1_MeetingAbstracts.A5262.The important role of pressure in supercritical fluid process development revealed by reaction calorimetry
PROCESS SAFETY PROGRESS. 2009. DOI : 10.1002/prs.10329.2008
Effects of nanoparticles on human health
2008Risk analysis in academia
2008. 17th congress of Society for Risk Analysis, Valencia, Spain, September 22-25, 2008.What could calorimetric techniques bring to safety analysis?
2008. 5th Int. Symposium on high pressure processes technology and chemical engineering, Safety forum, Qingdao, China, March 4-8, 2008.Supercritical Fluids
Encyclopedia of Polymer Science and Technology; Weinheim, Germany: Wiley VCH, 2008.Reaction monitoring of the MMA polymerization at marginal dispersion stability
AIChE Journal. 2008. DOI : 10.1002/aic.11373.Supercritical Reaction Calorimetry: Versatile Tool for Measuring Heat Transfer Properties and Monitoring Chemical Reactions in Supercritical Fluids
Industrial & Engineering Chemistry Research. 2008. DOI : 10.1021/ie0712030.Optimization of reaction calorimetry with supercritical fluids: A complete term-by-term analysis of the heat flow equation
Journal of Supercritical Fluids. 2008. DOI : 10.1016/j.supflu.2007.12.001.Optimization of reaction calorimetry for monitoring chemical reactions in supercritical fluids
Lausanne, EPFL, 2008. DOI : 10.5075/epfl-thesis-4053.2007
Surface modified Nylon 6,6 and application for adsorption and detection of uranium in potable water
Reactive and Functional Polymers. 2007. DOI : 10.1016/j.reactfunctpolym.2006.10.004.Reaction calorimetry, a comprehensive tool for studying reactions in supercritical media
2007. 20th Jacques Cartier Conference, Lyon, France, November 29-December 5, 2007.Marginal dispersion stability of polymerizations in scCO2-Pressure effect and engineering insight using calorimetric techniques
2007. AIChE 2007 annual meeting, Salt Lake City, Utah, U.S.A., November 4-9, 2007.The role of pressure at the limit of the dispersion stability in the polymerization of methyl methacrylate in supercritical CO2
2007. 6th European Congress of Chemical Engineering, Copenhague, Denmark, September 16-20, 2007. p. 129-130.Dispersion polymerization of methyl methacrylate in supercritical carbon dioxide: Control of molecular weight distribution by adjusting particle surface area
2007. 9th International Workshop on polymer reaction engineering, Hamburg, Germany, October 7-10, 2007.Supercritical heat flow reaction calorimetry: A comprehensive tool for monitoring reactions in supercritical fluids
2007. Swiss society of thermal analysis and calorimetry annual meeting, Lausanne, Switzerland, June 14, 2007.Temperature induced morphology control in the polymer foaming process
2007. 5th International Symposium on High Pressure processes tecnology and chemical engineering, Segovia, Spain, June 24-27, 2007.Temperature-induced morphology control in the polymer- foaming process
AICHE Journal. 2007. DOI : 10.1002/aic.11273.Free-radical dispersion polymerization of methyl methacrylate in supercritical carbon dioxide: a parametric analysis with reaction calorimetry
Macromolecular Reaction Engineering. 2007. DOI : 10.1002/mren.200600011.Is heat transfer governing chemical reactions in supercritical fluids?
Journal of Supercritical Fluids. 2007. DOI : 10.1016/j.supflu.2006.07.010.Dispersion polymerization of methyl methacrylate in supercritical carbon dioxide: control of molecular weight distribution by adjusting particle surface area
Macromolecular Symposia. 2007. DOI : 10.1002/masy.200751326.2006
Monitoring polymerization reactions in supercritical carbon dioxide. The fusion of calorimetry with ultrasound sensors and optical observations.
2006. 8th. International Symposium on Supercritical Fluids, Kyoto, Japan, November 5-8. 2006. p. 154.Monitoring polymerization reactions in suprcritical carbon dioxide with reaction calorimetry
2006. PRE VI, Halifax, Canada, May 21-26, 2006. p. nb1.Reaction calorimetry in supercritical fluids
Lausanne, EPFL, 2006. DOI : 10.5075/epfl-thesis-3472.High-temperature radical polymerization of methyl methacrylate in a continuous pilot scale process
Lausanne, EPFL, 2006. DOI : 10.5075/epfl-thesis-3460.2005
Monitoring reactions in supercritical media
Superctitical Carbon Dioxide; Weinheim: Wiley-VCH, 2005. p. 81-103.Supercirtical reaction calorimetry
2005. 12th international forum on process development, Flims, Switzerland, September 18-22, 2005. p. 1-19.Particularities of calorimetry in supercritical fluids
2005. 30th anniversary meeting of Swiss society of Thermal Analysis and Calorimetry, Basel, Switzerland, September 8-9. 2005.Monitoring reactions in supercritical carbon dioxide using heat flow calorimetry
2005. 7th. World Congress of Chemical Engineering, Glasgow, Scotland, July 10-14, 2005. p. 1-9.Monitoring chemical reactions in supercritical fluids
2005. 7th International Symposium on Supercritical Fluids, Orlando, U.S.A., May 1-4, 2005.Is heat transfer governing chemical reactions in supercritical fluids?
2005. 7th International Symposium on Supercritical Fluids, Orlando, U.S.A., May 1-4, 2005.Apparate zur Herstellung, Aufbereitung und Konfektionierung von Kunststoffen
Winnaacker-Küchler Encyclopedia; Weinheim, Germany: Wiley VCH, 2005.Polymerization reactors
Encyclopedia of Life Support System; UNESCO-EOLSS, 2005.Thermal initiation of MMA in high temperature radical polymerizations
Macromolecular Materials and Engineering. 2005. DOI : 10.1002/mame.200400275.Handbook of Polymer Reaction Engineering
Wiley VCH.Plastics
Winnacker-Kuechler: Chemische Technik (5. Auflage); Weinheim: Wiley-VCH, 2005. p. 465-819.Continuous high-temperature polymerisation of methyl methacrylate
2005. p. 83102/1-83102/9.Supercritical reaction calorimetry: A novel route to supercritical fluid reaction monitoring
2005. p. 338b/1-338b/5.Continuous high-temperature polymerization of MMA at pilot scale
2005. p. 555g/1-555g/5.Supercritical Carbon Dioxide in Polymer Reaction Engineering
Wiley VCH.Transport properties of supercritical carbon dioxide
2005. p. 37-54.Etude de la formation, de la dégradation et de la nature des peroxydes formés à partir du méthacrylate de méthyle en présence d’oxygène
2005Polymérisation du MMA à haute température et stabilité thermique
2005Etude thermodynamique des équilibres de phase en milieu surcritique: application à la polymérisation par dispersion dans le dioxyde de carbone surcritique
2005Development of reaction calorimetry applied to supercritical CO2 and methanol-CO2 critical mixture
Lausanne, EPFL, 2005. DOI : 10.5075/epfl-thesis-3228.2004
Monitoring polymerizations in supercritical fluids by reaction calorimetry
2004. 8th International Workshop on Polymer Reaction Engineering, Dechema monograph 138, 361-367, Hamburg, Germany, October 3-6 ,2004. p. 361-367.High temperature polymerisation of MMA
2004. 8th Internation Workshop on Polymer Reaction Engineering, Hamburg, Germany, October 3-6 ,2004. p. 511-516.A novel tool in calorimetric techniques
2004. 13th. American int. symp. on process development, Cambridge, Maryland, USA, September 12-15, 2004. p. 1-10.Heat transfer and hydrodynamics analysis in Supercritical Carbon Dioxide
2004. 7th. Conference on Supercritical Fluids and their Applications, Trieste, Italy, June 13-16, 2004. p. 185.Reaction calorimetry applied to the Dispersion Polymerization of Methyl Methacrylate in Supercritical Carbon Dioxide
2004. 7th. Conference on Supercritical Fluids and their Applications, Trieste, Italy, June 13-16, 2004. p. 119.Heat transfer and mixing analyis in supercritical fluids using a high pressure reaction calorimeter
2004. ISMIP5, Sevilla, Spain, June 1-4, 2004.Reaction Calorimetry in Supercritical Carbon Dioxide
2004. 18th Int. Symposium on Chemical Reaction Engineering, Chicago, U.S.A., June 6-9, 2004.Polymer reaction engineering, an integrated approach
Chemical Engineering Research & Design. 2004. DOI : 10.1205/cerd.82.12.1580.58035.Reaction Calorimetry as a New Tool for Supercritical Fluids
Organic Process Research & Development. 2004. DOI : 10.1021/op034174n.A new tool for the study of polymerization under supercritical conditions - preliminary results
Macromolecular Symposia. 2004. DOI : 10.1002/masy.200450207.Modeling of the high-temperature polymerization of methyl methacrylate. 1. Review of existing models for the description of the gel effect
Industrial & Engineering Chemistry Research. 2004. DOI : 10.1021/ie034280d.Reaction calorimetry in supercritical carbon dioxide - methodology development
Macromolecular Materials and Engineering. 2004. DOI : 10.1002/mame.200400077.Développement de matériaux absorbants pour les métaux lourds
2004Développement de la calorimétrie de réaction surcritique Polymérisation par dispersion
20042003
Initiator efficencies for polymerization reactions
2003Modeling of the high temperature polymerization of poly (Methylmethacrylate): I. Review of existing models for the description of the Gel Effect
2003. Polymer Reaction Engineering: Modelling, Optimisation and Control, Lyon, France, November 30-December 3, 2003. p. 57-62.Reaction calorimetry in supercritical fluids - A novel tool
2003. 11th RXE forum, Pontresina, Switzerland, September 28-October 2, 2003. p. 1-15.Polymerizaton in supercritical reaction calorimeter
2003. 4th European Congress of Chemical Engineering, Granada, Spain, September 21-25, 2003.Heat transfer in supercritical reaction calorimeter
2003. 11th European Conference on Mixing, Bamberg, Germany, October 15-17, 2003. p. 471-478.Reaction calorimetry in supercritical fluids- A novel tool
2003. 6th International Sympsium on SF , Versailles, France, April 28-30, 2003. p. 1139-1144.A new tool for the study of polymerization under supercritical conditions
2003. PRE V, Quebec City, Canada, May 18-23, 2003.Scale-Up of Polymerization Process: A Practical Example
Organic Process Research & Development. 2003. DOI : 10.1021/op025605p.On the degradation and stabilization of poly(methyl methacrylate) in a continuous process
Chemical Engineering & Technology. 2003. DOI : 10.1002/ceat.200390092.2002
Analysis development of branched polymers
2002Condensation reaction in supercritical media
2002New heat flux calorimetry applied to bulk polymerizations
2002Supercritical calorimetry (phase diagram)
2002Supercritical calorimetry: a novel tool
2002. 4th International Symposium on high pressure process technology, Conf. Proceedings, Che, Eng. Trans., 2, Venice, Italy.Recent advances in supercritical calorimetry: a novel tool
2002. 4th International Symposium on high pressure process technology, Conf. Proceedings, Che, Eng. Trans., 2, Venice, Italy, September 22-25, 2002.A new tool for the study of polymerization under supercritical conditions
2002. 14th WP-PRE, Barcelona, Spain, November 22-23, 2002. p. 33-35.On the degradation and stabilization of poly(methylmethacrylate) in a continuous process
2002. 17th international symposium on Chemical Reaction engineering, Hong Kong, PRC, August 25-28, 2002. p. 0058.Scale-up of polymerization processes: a practical example
2002. 5th Int. Conference on the Scale-up of chemical processes, Jersey, U.K., September 22-26, 2002. p. 148-158.Supercritical calorimetry: an emerging field
Chimia. 2002. DOI : 10.2533/000942902777680658.Scale-up of polymerization processes
Current Opinion in Drug Discovery & Development. 2002.Polyaddition du Bisphénol A avec une Résine Epoxyde Liquid en présence d’un terminateur de chaîne: étude cinétique
2002Continuous methylmethacrylate polymerization process
Lausanne, EPFL, 2002. DOI : 10.5075/epfl-thesis-2554.2001
Thermal degradation of PMMA
2001Etude cinétique des réactions de polyaddition pour la production de résine Arladite en continu dans réacteur tubulaire
2001Study of a continuous process for the production of solid epoxy resins
2001. 7th international congress on polymer reaction engineering, Hamburg, Germany, October 8-10, 2001. p. 457-480.Thermal stabilization and devolatilization of PMMA in a continuous polymerization pilot loop reactor
2001. 7th international congress on polymer reaction engineering, Hamburg, Germany, October 8-10, 2001. p. 481-487.Reactor Modeling of a Pilot Scale Tubular Loop: reactor with Free Radical Polymerization of Methymethacrylate
2001. SML'01, Lucca, Italy, June 3-9, 2001.Characterization of PMMA produced by continous high solid content polymerization process
2001. Dechema-Jahrestagung, Mainz, Germany, April 2-3, 2001. p. 124.Polymer reaction engineering at EPFL
Chimia. 2001. DOI : 10.2533/chimia.2001.128.Determination of a kinetic model for the polyaddition of bisphenol A with an epoxide liquid resin
Chimia. 2001. DOI : 10.2533/chimia.2001.234.Inline conversion monitoring in MMA high solid content polymerization process
Chimia. 2001. DOI : 10.2533/chimia.2001.249.Polymérisation radicalaire du MMA à haut taux de conversion dans un réacteur tubulaire à recyclage: stabilisation thermique du PMMA
2001Polyaddition du Bisphénol A avec des résines époxydes liquides
Lausanne, EPFL, 2001. DOI : 10.5075/epfl-thesis-2485.2000
Investment projects for the retrofitting of existing continuous plants in the chemical industry (Collaboration with ETHZ)
2000Umsetzungskonzepte CFD am Beispiel der Polymerisation
2000. Dechema, Frankfurt, Germany, May 5, 2000.Determination of a Kinetic Model for the Polyaddition of Bisphenol A with an Epoxide Liquid Resin
2000. 12th WP-PRE, 29, Proceedings, Lausanne, Switzerland, October 20-22, 2000.Pilot scale polymerization loop reactor: the right size to scale-up?
2000. Polymer reaction engineering VI, Palm Coast, Florida, USA, March 19-24, 2000. p. 56-60.Polymer reaction engineering at EPFL
2000. PGS tagung, Zurich, Switzerland, October 20, 2000.In-line Conversion Monitoring in PMMA high Conversion Polymerization Pocess
2000. 12th WP-PRE, 37, Proceedings, Lausanne, Switzerland, October 20-11, 2000.Kinetic modeling of free radical polymerization of styrene initiated by the bifunctional initiator 2,5-dimethyl-2,5-bis(2-ethyl hexanoyl peroxy) hexane
Polymer. 2000. DOI : 10.1016/S0032-3861(99)00651-5.On-line conversion monitoring through ultrasound velocity measurements in bulk styrene polymerization in a recycle reactor - part II: mathematical model
Polymer Reaction Engineering. 2000. DOI : 10.1080/10543414.2000.10744552.On-line conversion monitoring through ultrasound velocity measurements in bulk styrene polymerization in a recycle reactor - part I: experimental validation
Polymer Reaction Engineering. 2000. DOI : 10.1080/10543414.2000.10744551.1999
Study of the Isothermal Free Radical Polymerization of Styrene initiated with Bifunctional Initiator by Differential Scanning Calorimetry
1999. Dechema, Reaktionkalorimetrie, Frankfurt, Germany.Determination of a kinetic model for the polyaddition of the Bisphenol A with an epoxyde liquid resin
1999. PGS tagung, Conf. Proceedings, Winterthur, Switzerland, November 9-10, 1999.Ultrasound Propagation Velocity as a New Tool for the On-line Monitoring of Styrene Bulk Polymerisation in a Recycle Reactor
1999. 11th EFCE WPPRE, Proceedings CD-Rom, Amsterdam, The Netherlands.Modelling of the free Radical Polymerization of Styrene Initiated by Bifunctional Initiator
1999. 3rd annual polymers producers conference, Houston, Texas, USA. p. 456-479.1996
Numerical simulations of mixing in an SMRX static mixer
Chemical Engineering Journal. 1996. DOI : 10.1016/0923-0467(96)03093-X.1994
Study of micromixing in Polymerization reactions and its application in experimental copolimerization
1994. AIChE Annual Meeting, St. Louis, November 1993. p. 117-122.Styrene-maleic anhydride copolymerization in a recycle tubular reactor: reactor stability and product quality
Chemical Engineering Science. 1994. DOI : 10.1016/0009-2509(94)00327-0.Reaction engineering studies on the copolymerization of styrene with maleic anhydride in a loop reactor
Chemie Ingenieur Technik. 1994. DOI : 10.1002/cite.330660413.1992
Methyl-Methacrylate polymerization in a tubular reactor-Product quality and reactor behaviour
1992. 4th International Workshop on polymer reaction engineering, Berlin, Germany, October 12-14, 1992. p. 31-38.Solution polymerization of methyl methacrylate at high conversion in a recycle tubular reactor
Chemical Engineering Science. 1992. DOI : 10.1016/0009-2509(92)87099-C.Methyl methacrylate polymerization in a tubular reactor: product quality and reactor behavior
4th International Workshop on Polymer Reaction Engineering; Weinheim: VCH, 1992. p. 31-8.Barium sulfate precipitation as model reaction for segregation studies at pilot scale
Chemical Engineering and Processing. 1992. DOI : 10.1016/0255-2701(92)87004-Z.1990
Characterization of segregation in a tubular polymerization reactor by a new chemical method
Chemical Engineering Science. 1990. DOI : 10.1016/0009-2509(90)80172-B.1989
Concentration segregation in a tubular polymerization reactor - an experimental study
Polymer reaction engineering. 1989.Cocentration Segregation in a tubular polymerization reactor-an experimental study
1989. 3rd Berlin International workshop on polymer reaction engineering, Berlin, Germany, September 27-29, 1989. p. 285-294.1988
Micromixing in a static mixer and an empty tube by a chemical method
Chemical Engineering Science. 1988. DOI : 10.1016/0009-2509(88)87068-4.Enseignement & Phd
Enseignement
Chemistry and Chemical Engineering