Thomas Gmür
thomas.gmuer@epfl.ch +41 21 693 29 24
Citizenship: belge, suisse
Publications
Infoscience publications
Infoscience
A Novel Structural Health Monitoring Method for Full-Scale CFRP Structures
Lausanne, EPFL, 2015. DOI : 10.5075/epfl-thesis-6422.Identification of the elastic and damping properties in sandwich structures with a low core-to-skin stiffness ratio
Composite Structures. 2011. DOI : 10.1016/j.compstruct.2010.09.009.Characterisation of Low Impact Energy Induced Damage in Composite Plates with Embedded Optical Sensors
Lausanne, EPFL, 2011. DOI : 10.5075/epfl-thesis-5046.Finite-Elemente-Analyse von mikroskopischen biologischen Strukturen, Bildgebung und Messung durch Rasterkraftmikroskopie
Einführung in die Nanobiomechanik; Weinheim: WILEY-VCH Verlag GmbH & Co. KGaA, 2010. p. 183-199.Internal strain measurements in CFRP plates subjected to impact load using FBG sensors
2009. 17th International Conference on Composite Materials ICCM-17, Edinburgh, July 27-31, 2009.Numerical-experimental identification of the elastic and dissipative properties in composite sandwich plates
2009. 15th International Conference on Composite Structures ICCS 15, Porto, June 14-17, 2009. p. P186.Through-the-thickness deformation of composite laminates subjected to bending
Journal of the Mechanical Behavior of Materials. 2009. DOI : 10.1515/JMBM.2009.19.2-3.167.Numerical-experimental identification of the elastic and damping properties in composite plates
Composite Structures. 2009. DOI : 10.1016/j.compstruct.2009.03.001.Stress and failure analysis of crimped metal-composite joints used in electrical insulators subjected to bending
Composites Part A: Applied Science and Manufacturing. 2009. DOI : 10.1016/j.compositesa.2009.02.020.Finite Element Analysis of Microscopic Biological Structures
The World of Nano-Biomechanics: Mechanical Imaging and Measurement by Atomic Force MIcroscopy; Amsterdam: Elesevier, 2008. p. 221-240.Characterization of dynamic response of composite plates with embedded FBG sensors
2008. 4th International Conference on Composites Testing and Model Identification CompTest 2008, Dayton, October 20-22, 2008. p. P1-3.Characterization of internal strains in polymeric materials for damage monitoring using embedded FBG sensors
2008. International Conference on Adaptive Systems and Technologies (ICAST 2008), Ascona, october 6-9, 2008.Dynamic strain measurements of composite materials using embedded fibre Bragg grating sensors
2008. 5th International Conference on Fracture of Polymers, Composites and Adhesives (5th ESIS TC4 Conference), Les Diablerets, September 7-11, 2008. p. P023.Modal material identification method using a dissipative finite element model
2008. 9th International Conference on Computational Structures Technology, Athens, September 2-5, 2008. p. P156.Characterisation of bridging tractions in mode-I delamination using distributed strain measurements and numerical modelling
2008. 13th European Conference on Composite Materials, Stockholm, June 2-5, 2008. p. P517.Bridging tractions in mode-I delamination: measurements and simulations
Composites Science and Technology. 2008. DOI : 10.1016/j.compscitech.2007.08.024.Identification modale numérique-expérimentale des propriétés élastiques et dissipatives de matériaux composites
Lausanne, EPFL, 2008. DOI : 10.5075/epfl-thesis-4215.Analyse de l'état de contrainte et de l'endommagement d'assemblages sertis en matériau mixte métal-composite sollicités en traction ou en flexion
Lausanne, EPFL, 2008. DOI : 10.5075/epfl-thesis-4005.Improved modal characterization of the constitutive parameters in multilayered plates
Composites Science and Technology. 2007. DOI : 10.1016/j.compscitech.2006.05.016.Inverse method based on modal analysis for characterizing the constitutive properties of thick composite plates
Computers & Structures. 2007. DOI : 10.1016/j.compstruc.2006.08.090.Acoustic emission inspection and analysis of crimped metal-composite joints subjected to bending
2007. 4th International Conference on Non-Destructive Testing, Chania, October 11-14, 2007. p. 5-2.Evaluation of a dissipative finite element model for modal identification application
2007. 7th International Conference on Structural Analysis of Advanced Materials ICSAM 2007, Patras, September 2-6, 2007. p. 11B1.Bridging tractions in mode-I delamination: measurements and simulations
2007. 9th Deformation and Fracture of Composites Conference DFC9, Sheffield, April 11-13, 2007. p. T14.Modal validation of sandwich shell finite elements based upon a p-order shear deformation theory including zigzag terms
International Journal for Numerical Methods in Engineering. 2007. DOI : 10.1002/nme.2301.Delamination detection and determination of bridging stresses using FBG optical sensors
Composites Part A. 2007. DOI : 10.1016/j.compositesa.2007.07.009.Méthode des éléments finis en mécanique des structures
Presses polytechniques et universitaires romandes, Lausanne.Acoustic emission study and strength analysis of crimped steel-composite joints under traction
Composite Structures. 2006. DOI : 10.1016/j.compstruct.2005.04.017.Experimental Study on the Effects of the Boundary Conditions on the Deformations of Composite Plates
Composite Science and Technology. 2006. DOI : 10.1016/j.compscitech.2005.10.032.Residual Strain Development in an AS4/PPS Thermoplastic Composite Measure using Fiber Bragg Gratin Sensors
Composites Part A. 2006. DOI : 10.1016/j.compositesa.2005.02.016.Experimental and numerical strength analysis of mixed metal-composite crimped or adhesively bonded joints
2006. 3rd International Conference on Composites Testing and Model Identification CompTest 2006, Porto, Portugal, April 10-12, 2006. p. 25-26.Modal identification of the elastic properties in composite sandwich structures
2006. 3rd International Conference on Composites Testing and Model Identification CompTest 2006, Porto, Portugal, April 10-12. p. 162-163.Delamination propagation measurement using long gauge-length FBG sensors
2006. 3rd International Conference on Composites Testing and Model Identification CompTest 2006, Porto, Portugal, April 10-12, 2006. p. 174-175.Investigation of residual strains and delamination in AS4/PPS composite using fibre Bragg grating sensors
2006. 6th European Solid Mechanics Conference, Budapest, Hungary, August 28-September 1, 2006.A mixed numerical-experimental identification method for evaluating the constitutive parameters of composite laminated shells
2006. p. 85-86.Improved dynamic characterization of the elastic properties in composite plates
2005. 12th International Conference on Composites/Nano Engineering ICCE-12, Santa Cruz de Tenerife, Spain, August 1-6, 2005.Identification par recalage modal et fréquentiel des propriétés constitutives de coques en matériaux composites
Lausanne, EPFL, 2005. DOI : 10.5075/epfl-thesis-3106.Modal validation of a set of C0 compatible composite shell elements
Composites Science and Technology. 2004. DOI : 10.1016/j.compscitech.2004.02.005.Structural dynamics optimization based on a hybrid inverse synthesis method using a quadratic approximation
Journal of Vibration and Acoustics. 2004. DOI : 10.1115/1.1688759.Identification by modal analysis of composite structures modelled with FSDT and HSDT laminated shell finite elements
Composites Part A : Applied science and Manufacturing. 2004. DOI : 10.1016/j.compositesa.2004.01.014.Stress ans damage analysis of composite-aluminium joints used in electrical insulators subject to traction and bending
Composite Structures. 2004. DOI : 10.1016/j.compstruct.2003.09.005.Through-the-thickness distribution of strains in laminated composite plates subjected to bending
Composites Science and Technology. 2004. DOI : 10.1016/S0266-3538(03)00201-X.Introduction à la mécanique des solides et des stuctures
Presses polytechniques et universitaires romandes, Lausanne.Tree stability : analysis of an in-situ impact test
2004. September 13-17 2004.Residual strain development in laminated thermoplastic composites measured using fibre Bragg grating sensors
2004. September 21-23 2004. p. 145-146.Long FBG sensor characterization of residual strains in AS4/PPS thermoplastic laminates
2004. Smart Structures and Materials, San Diego, CA, United States, March 15-17 2004. p. P5384-39. DOI : 10.1117/12.538053.Numerical-experimental identification of the elastic properties in composite shells
2004. September 7-9 2004. p. P239.Through-the-thickness deformation of composite laminates subjected to bending
2003. August 17-22 2003. p. 80-.Modal identification of composite structures modelled with FSDT and HSDT laminated shell finite elements
2003. January 28-31 2003. p. P11.Stress analysis and acoustic emission studies on aluminium-composite joints subjected to bending
2003. October 15-17 2003. p. 22-27.Experimental and numerical studies on the deformation behavior of polymer based composite plates subjected to bending
2003. January 28-31 2003. p. P10-5.Deformation characteristics of composite laminates, Part II : an experimental/numerical study on equivalent single-layer theories
Composites Science and Technology. 2002. DOI : 10.1016/S0266-3538(01)00184-1.Optical fibre Bragg grating sensors in the mechanics of composite laminated plates
2002. June 23-28 2002. p. 303.Eléments de mécanique des structures
Presses polytechniques et universitaires romandes, Lausanne.A subspace iteration algorithm for the eigensolution of large structures subject to non-classical viscous damping
International Journal for Numerical Methods in Engineering. 2000. DOI : 10.1002/1097-0207(20001210)49:10%3C1267::AID-NME5%3E3.0.CO;2-M.Experimental Analysis of Composite Laminates Subjected to Bending
2000. International Conference on Interferometry, Lausanne, Switzerland, September 25-28, 2000. p. 355-362. DOI : 10.1007/978-3-642-57323-1_44.ESPI and Embedded FBG Sensors for Composite Plate Bending Measurements
2000. June 5-8 2000. p. 147-150.Dynamique des structures - Analyse modale numérique
Presses polytechniques et universitaires romandes, Lausanne.Three-dimensional solid-to-beam transition elements for structural dynamics analysis
International Journal for Numerical Methods in Engineering. 1993. DOI : 10.1002/nme.1620360902.A set of three-dimensional solid to shell transition elements for structural dynamics
Computers & Structures. 1993. DOI : 10.1016/0045-7949(93)90387-S.Shaft finite elements for rotor dynamics analysis
Journal of Vibration and Acoustics. 1991. DOI : 10.1115/1.2930212.Solid to shell transition finite elements for structural dynamics analysis
1991. 1991. p. 1091-1097.A set of C0 finite elements for rotor dynamics analysis
1991. 1991. p. 1255-1262.A subspace forward iteration method for solving the quadratic eigenproblem associated with the FDE formulation
International Journal for Numerical Methods in Engineering. 1990. DOI : 10.1002/nme.1620290503.The solution of large undamped gyroscopic eigensystems by a subspace iteration method
Computers & Structures. 1989. DOI : 10.1016/0045-7949(89)90348-9.A subspace iteration method for the eigensolution of large undamped gyroscopic systems
International Journal for Numerical Methods in Engineering. 1989. DOI : 10.1002/nme.1620280303.The solution of the eigenproblem arising in the finite dynamic element analysis by a subspace iteration
1989. January 30-February 1 1989. p. 1394-1401.The solution of large undamped gyroscopic eigensystems by a subspace iteration method
1989. 1989. p. 591-599.Eigensolution of large conservative gyroscopic systems by a subspace forward iteration method
1989. January 30-February 1 1989. p. 159-165.Résolution par une méthode d'itération sur sous-espace du problème aux valeurs propres associé aux systèmes gyroscopiques conservatifs
1988. 15-Apr 1988. p. 4-.Teaching & PhD
Teaching
Mechanical Engineering