François Maréchal
EPFL Valais Wallis
EPFL IPESE (SCI-STI-FM)
Rue de l'Industrie 17
1951 Sion
+41 21 693 35 16
+41 21 693 35 06
Office:
ME A2 465, I17 4 F1
EPFL › STI › IGM › SCI-STI-FM
Site web: https://ipese.epfl.ch
+41 21 693 35 16
EPFL › STI › STI-SGM › SGM-ENS
Expertise
See english version
Mission
see english version
En 2022 : François Maréchal est classé par research.com dans le top 10 des chercheurs suisses dans le domaine de l’ingénierie et de la technologie. Il est titulaire d’un diplôme d’ingénieur en génie des procédés (1986) et d’un doctorat de l’Université de Liège en Belgique (1995), où il a réalisé un doctorat dans le domaine de l’intégration des procédés des sites industriels. En 2001, il a rejoint l’Ecole Polytechnique Fédérale de Lausanne (EPFL) en Suisse où il est professeur à l’EPFL sur le Campus Valais Wallis de l’EPFL, à la tête du groupe d’Ingénierie des Procédés Industriels et des Systèmes Energétiques. Il mène des recherches dans le domaine de l’aide à la décision assistée par ordinateur pour l’ingénierie des processus et des systèmes énergétiques. Ses activités se concentrent sur l’intégration de l’utilisation rationnelle de l’énergie, des ressources énergétiques renouvelables et des concepts d’économie circulaire dans la conception des processus industriels et des systèmes énergétiques.
François Maréchal est le membre fondateur et ancien co-président de la section énergie de la Fédération européenne de génie chimique et représente la Suisse au sein du groupe de travail sur l’utilisation des ordinateurs en génie chimique de la Fédération européenne de génie chimique. François Marechal est rédacteur en chef de la spécialité “Process and Energy Systems Engineering” de la revue en libre accès “Frontiers in Energy Research”.
François Maréchal est le membre fondateur et ancien co-président de la section énergie de la Fédération européenne de génie chimique et représente la Suisse au sein du groupe de travail sur l’utilisation des ordinateurs en génie chimique de la Fédération européenne de génie chimique. François Marechal est rédacteur en chef de la spécialité “Process and Energy Systems Engineering” de la revue en libre accès “Frontiers in Energy Research”.
Formation
|
1986 – 1986 Université de Liège (Belgium)
|
1995 – 1995
University of Liège (Belgium)
Dirigée par
Prof Boris KalitventzeffLaboratoire d'analyse et de synthèse des systèmes chimiques
Expériences professionnelles
Maitre d'enseignement de Recherche
1er ingénieur de recherche
District heating and cooling energy network using CO2 as a heat and mass transfer fluid
Heat Pumping Technologies MAGAZINE. 2018.Key Energy and Technological Aspects of Three Innovative Concepts of District Energy Networks
Energy. 2016. DOI : 10.1016/j.energy.2016.05.065.Urban Energy System Design from the Heat Perspective using mathematical Programming including thermal Storage
Lausanne, EPFL, 2015. DOI : 10.5075/epfl-thesis-6731.Integration of Organic Rankine Cycles for Waste Heat Recovery in Industrial Processes
Lausanne, EPFL, 2015. DOI : 10.5075/epfl-thesis-6536.Exergy representations in thermodynamics
2015. HEFAT.Towards practical solutions for energy efficiency of large-scale industrial sites
Lausanne, EPFL, 2015. DOI : 10.5075/epfl-thesis-6390.Key energy and technological aspects of three innovative concepts of District energy networks
2015. ECOS 2015, Pau, France, June 29-July 3, 2015.Biomass To Liquids : Thermo-Economic Analysis and Multi-Objective Optimisation
Lausanne, EPFL, 2015. DOI : 10.5075/epfl-thesis-6529.Methodology for Identification of Suitable ORC-Cycle and Working-Fluid using Integration with Multiple Objectives
2014. 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2014)', 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2014). p. 1141 - 1146. DOI : 10.3303/Cet1439191.Integrating Rate Based Models into a Multi-Objective Process Design & Optimisation Framework using Surrogate Models
Lausanne, EPFL, 2014. DOI : 10.5075/epfl-thesis-6302.Design & Optimisation of an Innovative Solid Oxide Fuel Cell – Gas Turbine Hybrid Cycle for Small Scale Distributed Generation
Fuel Cells. 2014. DOI : 10.1002/fuce.201300196.Swiss-EnergyScope.ch: a Platform to Widely Spread Energy Literacy and Aid Decision-Making
2014. 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2014). p. 877 - 882. DOI : 10.3303/Cet1439147.Energy efficiency improvement by applying thermodynamic optimization of distillation columns in the site scale integration
2013. 14th Congrès de la Société Française de Génie des Procédés, Lyon, France, Octobre 8-10, 2013.Demand Side Management et réseaux CAD
2013Process Integration of Lignocellulosic Biomass Pre-treatment in the Thermo-Chemical Production of F-T Fuels. Centralised Versus Decentralised Scenarios
2013. PRES13 - 16th Conference Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Rhodes, Greece, 29 September - 2 October.Dynamic Modeling and Simulation of Two-phase Evaporators and Condensers in the context of a CO2 Based District Energy Network
2013. 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Guilin, China, 2013-07-16 - 2013-07-19.Energy integration optimisation of chilled ammonia process for CO2 capture
2013. 9th European Congress of Chemical Engineering, The Hague, The Netherlands, April 21-25, 2013.INTEGRATION OF A SEASONAL STORAGE
2013Thermo-environomic optimisation of fuel decarbonisation alternative processes for hydrogen and power production
Lausanne, EPFL, 2013. DOI : 10.5075/epfl-thesis-5655.Design of solar driven supercritical water desalination plant
2013MEU: An urban energy management tool for communities and multi-energy utilities
2013. CISBAT 2013, Lausanne, Switzerland, September 4-6, 2013.Life Cycle Assessment and Environomic Optimization of Concentrating Solar Thermal Power Plants
2013. 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Guilin, China, 2013-07-16 - 2013-07-19.The role of process integration techniques in the thermo-economic optimization of energy conversion systems
International Process Integration Jubilee Conference, Gothenburg, Sweden, March 18-20, 2013.Thermo-chemical production of F-T fuels from lignocellulosic biomass: Heat integration of gasification
2013. XIVeme Congres SFGP 2013, Lyon, France, Octobre 8-10.Methodology using process integration for identifying suitable Organic Rankine Cycles for waste heat valorisation
International Process Integration Jubilee Conference 2013, Gothenburg, Sweden, March 18-20, 2013.Potentiel thermo-économique d’un réseau CO2 appliqué à divers environnements urbains
2013A methodology for creating sequential multi-period base-case scenarios for large data sets
2013. PRES, Rhodes, Greece, September 29 - October 2, Greece. p. 1231 - 1236. DOI : 10.3303/CET1335205.Increasing Efficiency of Fuel Ethanol Production from Lignocellulosic Biomass by Process Integration
Energy & Fuels. 2013. DOI : 10.1021/ef301952u.Evaluation of advanced technologies based on integration techniques - Application on dividing wall column
2013Site-scale process integration and utility optimization with multiple representations of heating and cooling requirements: Application to an existing chemical plant
2013. 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Guilin, China, 2013-07-16 - 2013-07-19.Thermo-environomic evaluation of the ammonia production
2013. XIVe Congrès SFGP, Lyon, France, October 8-10, 2013.ECOS: Solar Potential Assessment on Roofs of Urban Areas and its Integration
2013. 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Guilin, China, 2013-07-16 - 2013-07-19.Process engineering method for systematically comparing CO2 capture options
2013. 23rd European Symposium on Computer Aided Process Engineering (ESCAPE). p. 367 - 372. DOI : 10.1016/B978-0-444-63234-0.50062-2.Application of dynamic building simulation for the study of urban energy systems
2013ECOS: Integrated and practical energy planning for new districts
2013. 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Guilin, China, 2013-07-16 - 2013-07-19.Overview over the design (and planning) of Urban energy systems
2013Method for Combined Water-Energy Recovery in Industrial Processes
2013Multi-Layer Representation of Energy Requirement for Site Scale Integration
International Process Integration Jubilee, Gothenburg, Chalmers, Sweden, March 18-20, 2013.Heat Integration and Exergy Analysis of Reactors
2013Design of geothermal energy conversion systems with a life cycle assessment perspective
2012. 37th Stanford Geothermal Workshop, Stanford, California, USA, January 30 - February 1, 2012.Trigeração de alta eficiência em sistemas de energia integrados
COGERAÇÃO. 2012.Integration of Life Cycle Assessment in the conceptual design of renewable energy conversion systems
Lausanne, EPFL, 2012. DOI : 10.5075/epfl-thesis-5564.Assessment of Environmental Impacts Related to Shale Gas Extraction in the Polish Contex
2012Integrated Solid Oxide Fuel Cell : Gas Turbine Hybrid Systems with or without CO2 Separation
Lausanne, EPFL, 2012. DOI : 10.5075/epfl-thesis-5323.Physical absorption processes modeling and analysis for CO2 capture
2012Multi-Objective Optimisation of District Energy Systems
2012Optimisation of CO2 based heating networks in urban areas
2012THERMO-ENVIRONOMIC EVALUATION OF AMMONIA PRODUCTION
2012THERMOECONOMIC ANALYSIS AND OPTIMISATION OF AIR-BASED BOTTOMING CYCLES FOR WATER-FREE HYBRID SOLAR GAS-TURBINE POWER PLANTS
2012CO2 mitigation in thermo-chemical hydrogen processes: Thermo-environomic comparison and optimization
Energy Procedia. 2012. DOI : 10.1016/j.egypro.2012.09.072.H2 processes with CO2 mitigation: Thermo-economic modeling and process integration
International Journal of Hydrogen Energy. 2012. DOI : 10.1016/j.ijhydene.2012.05.046.Polymer spiral film gas-liquid heat exchanger for waste heat recovery in exhaust gases
2012APPLICATION OF EXERGY ANALYSIS IN ENERGY REQUIREMENT ASSAY OF THE TYPICAL PROCESS UNIT OPERATIONS
2012Platform development for studying integrated energy conversion processes: Application to a power plant process with CO2 capture
2012. 11th International Symposium on Process Systems Engineering, Singapore, July 15-19, 2012. p. 1015 - 1019. DOI : 10.1016/B978-0-444-59506-5.50034-1.Energy system design under uncertainty
Lausanne, EPFL, 2012. DOI : 10.5075/epfl-thesis-5559.Environmental and economic analysis of the heating of a building
2012Modélisation et optimisation de système énergétique intégré dans un environnement urbain composé de plusieurs bâtiments
2012Urban Energy System Analysis
2012Application of Exergy Analysis in Energy Requirements Assay of the Typical Process Unit Operations of Chemical Industries
2012Chauffe repas Solar Impulse
2012Enthalpy and exergy analysis in the framework of a district scale energy balance
2012A GIS-based Methodology for the Evaluation of Integrated Energy Systems in Urban Area
Lausanne, EPFL, 2012. DOI : 10.5075/epfl-thesis-5287.Performance evolution and modeling of PEM fuel cell systems
2012Study of the Integration of District Heating and Cooling with an Electro-Thermal Energy Storage System
2012A Techno Assessment of Different Solvent- based Capture Technologies Within an IGCC-CCS Power-station
2012Enjeux de la compensation CO2 en Suisse - présentation d’une méthodologie pour la comparaison des projets
2012Thermo-economic analysis and modeling of oxyfuel processes
2012THERMAL STORAGE AIMING AT INCREASING THE SHARE OF USED HEAT REJECTED FROM A COOLING PROCESS
2012Methodology and Thermo-Economic Optimization for Integration of Industrial Heat Pumps
Lausanne, EPFL, 2012. DOI : 10.5075/epfl-thesis-5341.A GENERAL AND OPERATIONAL METHODOLOGY FOR ENERGY EFFICIENCY OF INDUSTRIAL CHEMICAL PROCESSES
Journée de thesard de Rhodia, Lyon, France, Nov 15, 2012.Defining the potential of usable waste heat in industrial processes with the help of pinch and exergy analysis
2012. 15th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Prague, Czech Republic, August 25-29, 2012. p. 103 - 108. DOI : 10.3303/CET1229018.CHARACTERIZATION OF THE THERMOECONOMIC OPTIMIZATION PROBLEM OF AN ELECTRICITY STORAGE SYSTEM BASED ON THEORETICAL THERMODYNAMIC CYCLES
2012Optimal Process Design for Power Production from Wet Waste Biomass by Hydrothermal Gasification coupled to a Solid Oxide Fuel Cell
2011Etude thermoéconomique de l'apport du stockage thermique dans une centrale de chauffe équipée d'une cogénération et d'une pompe à chaleur
2011Intégration énergétique dans des procédés multi-périodes appliqués en milieu urbain
2011Bilan de Vapeur et optimisation énergétique de la raffinerie de Collombey
2011Thermo-chemical H2 production: Thermo-economic modeling and process integration
2011. European Fuel Cell Forum, Lucerne, Switzerland, June 28- July 1, 2011.Optimisation Multi-Objectifs: Application au procédé de purification de bioéthanol
2011From science to application in Geneva: best practice example from theoretical concept on exergy over a law into everyday life of a citizen
2011. World Engineers' Convention, Geneva, Switzerland, September 4-9, 2011.Renewable energy solutions for Clip-Air project
2011Étude de la pompe à chaleur comme unité de conversion d’énergie renouvelable
2011Systèmes hybrides pour les installations de géothermie profondes: cas d'étude de La Chaux-de-Fonds
2011The Optimized Integration of Biomass Fuel in the District Heating System in Poznan, Poland: Part 2
2011Analyse énergétique d’un quartier et étude d’un réseau de chauffage à distance, La Chaux-de-Fonds
2011A Multi-Objective Optimization Method to integrate Heat Pumps in Industrial Processes
2011. 21st European Symposium on Computer Aided Process Engineering – ESCAPE 21, Chalkidiki, Greece, May 29 - June 1, 2011. p. 1673 - 1677. DOI : 10.1016/B978-0-444-54298-4.50113-6.Thermo-economic evaluation of coal power plants with CO2 capture
2011Heat Pump Integration Into Urban Energy Systems
2011Process design methods for sustainable energy systems
National Technical University of Athens, Erasmus exchange Seminar, National Technical University of Athens, February 17, 2011.Multi-Objective Optimization of Biomass Conversion Technologies by Using Evolutionary Algorithm and Mixed Integer Linear Programming (MILP)
2011. European Conference on Polygeneration, Tarragona, Spain, March 30-April-1, 2011.Hybrid Cycle SOFC - Inverted Gas Turbine with CO2 Separation
EP2449229 ; US9228494 ; US2012117979 ; EP2449229 ; WO2011001311 ; WO2011001311 . 2011.An environmental optimization model for bioenergy plant sizes and locations for the case of wood-derived SNG in Switzerland
2011. World Renewable Energy Congress 2011- Sweden, Linköping, Sweden, May 8-11, 2011.Co-production of Hydrogen and Electricity from Lignocellulosic Biomass: Process Design and Thermo-economic Optimization
2011. 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Novi Sad, Serbia, July 4-7, 2011. p. 339 - 349. DOI : 10.1016/j.energy.2012.01.056.Systematic integration of LCA in process systems design: Application to combined fuel and electricity production from lignocellulosic biomass
Computers & Chemical Engineering. 2011. DOI : 10.1016/j.compchemeng.2010.11.012.ECOS 2010 Volume II (Biomass & Renewable)
2011. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy System (ECOS2010).Optimisation thermo-économique d’une ligne de séchage industrielle
2011Multi-Objective Design and Optimization of District Energy Systems, Including Renewable energy
2011A general and operational methodology for energy efficiency of industrial chemical processes
2011. 13th Congrès de la Société Française de Génie des Procédés (SFGP), Lille Grand palais, 29 Nov-1 Dec, 2011.Heat Pump Integration in Industrial Processes -II
2011Multi-objective investment and operating optimization of energy systems with integer cut constraints and evolutionary algorithm
2011. ECOS2011:The 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Novi Sad, Serbia, July 4–7, 2011.Defining Optimal Configurations of Geothermal Systems Using Process Design and Process Integration Techniques
2011. 14th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Florence, Italy, May 8-11, 2011. p. 881 - 886. DOI : 10.3303/CET1125147.ECOS 2010 Volume V (Fuel cell & Internal combustion engines)
2011. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy System (ECOS2010).Innovative Hybrid Cycle Solid Oxide Fuel Cell-Inverted Gas Turbine with CO2 Separation
2011. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Lausanne, Switzerland, June 14-17, 2010. p. 565 - 572. DOI : 10.1002/fuce.201000130.Process integration and opportunities for heat pumps in industrial processes
International Journal of Thermodynamics. 2011.Développement d'une méthode pour le calcul d'un indicateur de rendement exergétique
2011Méthode d’analyse combinée eau-énergie Validation et application à un cas papetier
2011The Optimized Integration of Biomass Fuel in the District Energy System in Poznan, Poland: Part 1
2011Concept énergétique du futur complexe sportif des Prés-de-Vidy
2011Life Cycle Analysis and Thermo-Environomic Optimization of Concentrated Solar Thermal Power Plants
2011From science to application in Geneva: best practice example from theoretical concept on exergy over a law into everyday life of a citizen
2011. World Engineers' Convention, Geneva, Switzerland, September 4-9, 2011.ECOS 2010 Volume IV (Power plants & Industrial processes)
2011. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy System (ECOS2010).Heat pump integration in a cheese factory
2011. 14th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Florence, Italy, May 8-11, 2011. p. 195 - 200. DOI : 10.3303/CET1125033.A systematic methodology for the synthesis of unit process chains using Life Cycle Assessment and Industrial Ecology Principles
2011. 21st European Symposium on Computer-Aided Process Engineering, Porto Carras Resort, Chalkidiki, Greece, May 29 - June 1, 2011. p. 1215 - 1219. DOI : 10.1016/B978-0-444-54298-4.50022-2.ECOS 2010 Volume III (Cycles & Buildings)
2011. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy System (ECOS2010).Optimal process design for the polygeneration of SNG, power and heat by hydrothermal gasification of waste biomass: Process optimisation for selected substrates
Energy & Environmental Science. 2011. DOI : 10.1039/c0ee00634c.ECOS 2010 Volume I (Thermodynamics)
2011. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy System (ECOS2010).Process integration aspects in the design of biofuel processes
BBEST 2011 : 1st Brazilian BioEnergy Science and Technology Conference, Campos do Jordao, August 14-18,2011.Design and optimization of district energy systems, including renewable systems, wastewater treatment and poly-generation technologies
2011Base case process development for energy efficiency improvement, application to a Kraft pulping mill. Part II: Benchmarking analysis
Chemical Engineering Research & Design. 2011. DOI : 10.1016/j.cherd.2010.09.013.Analysis of the economic criteria used in energy efficiency optimization of industrial systems
2011Experimental Real-Time Optimization of a Solid Oxide Fuel Cell Stack via Constraint Adaptation
2010. 23rd Int. Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Lausanne, June 14-17, 2010. p. 141 - 148.Application of the district cooling/heating network design models in the GLN area
2010Conception d'un outil d'optimisation de performance environnementale utilisant l'analyse de cycle de vie et les concepts de l'écologie industrielle
2010Combined mass and energy integration in process design at the example of membrane-based gas separation systems
Computers & Chemical Engineering. 2010. DOI : 10.1016/j.compchemeng.2010.06.019.Management Energétique Urbain - Neuchâtel
2010Analyse énergétique d'un procédé de pâte Kraft
2010Intégration énergétique d’un procédé agroalimentaire à l’aide de la plateforme internet PinchLight
2010Methodology for the identification of optimal exploitation schemes of geothermal systems
CCES Latsis Symposium 2010, Zürich, Switzerland, November 17-19, 2010.Thermo-economic modeling of CO2 capturing processes
2010WWTP optimizations studies using gPROMS
Outils et méthodes pour intégrer les ressources, demandes et technologies de conversion à l’échelle d’un projet urbain
Master of Advanced Studies HES-SO en Energie et développement durable dans l’environnement bâti 2009-2012, Lausanne, juin 4, 2010.Environomic optimization of SNG production from lignocellulosic biomass using Life Cycle Assessment
2010. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Lausanne, Switzerland, June 14-17, 2010.Thermo-economic analysis of chemical looping processes
2010Process Integration Analysis of an Industrial Hydrogen Production Process
2010. WHEC2010; 18th World Hydrogen Energy Conference 2010, Essen, Germany, May 16-21, 2010.Thermo-economic Evaluation of the Thermochemical Production of Liquid Fuels from Biomass
2010. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2010), Lausanne, Switzerland, June 14-17, 2010.Optimal technologies for the thermochemical production of Synthetic Natural Gas (SNG) from lignocellulosic biomass
18th European Biomass Conference and Exhibition, Lyon, France, May 3-7, 2010.Concept énergétique du développement urbain de la Commune de Nyon
2010Integrated Thermo-Economic Modelling of Geothermal Resources for Optimal Exploitation Scheme Identification
2010. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Lausanne, Switzerland, June 14-17, 2010.Thermochemical production of liquid fuels from biomass: Thermo-economic modeling, process design and process integration analysis
Biomass and Bioenergy. 2010. DOI : 10.1016/j.biombioe.2010.07.018.Power and cogeneration technology environomic performance typification in the context of CO2 abatement part I: Power generation
Energy. 2010. DOI : 10.1016/j.energy.2010.03.004.Increasing Conversion Efficiency in Fuel Ethanol Production from Lignocellulosic Biomass by Polygeneration - and a Paradoxon between Energy and Exergy in Process Integration
2010. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2010), Lausanne, Switzerland, June 14-17, 2010.Process Integration and Energy Conversion in a Natural Gas Refinery
2010Thermo-economic modeling of fuel decarbonization processes
CCES Latsis Symposium 2010, Zürich, Switzerland, November 15-17, 2010.Études d'options énergétiques pour le quartier "Etraz-Sud"
2010Méthodologie de la synthèse des systèmes énergétiques industriels
Lausanne, EPFL, 2010. DOI : 10.5075/epfl-thesis-4867.Power and cogeneration technology environomic performance typification in the context of CO2 abatement part II: Combined heat and power cogeneration
Energy. 2010. DOI : 10.1016/j.energy.2010.03.042.Process Design Methodology for Thermochemical Production of Fuels from Biomass : Application to the Production of Synthetic Natural Gas from Lignocellulosic Resources
Lausanne, EPFL, 2010. DOI : 10.5075/epfl-thesis-4693.Strategy for the identification of optimal exploitation schemes of geothermal systems
European Geothermal PhD Day 2010, Potsdam, February 11-12 2010.Study on the definition of dTmin for heat recovery
2010Utility Optimization in a Brewery Process Based on Energy Integration Methodology
2010. The 23th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Lausanne, Switherland, June 14-18, 2010. p. 91 - 98.Complete Advanced Energetics Course Notes
2010.Process Integration Analysis of an Industrial Hydrogen Production Process
WHEC2010; 18th World Hydrogen Energy Conference 2010, Essen, Germany, May 16-21, 2010.Solar Potential Assessment on Roofs of Urban Areas and its Integration
2010. EPFL / UNESCO Chair International Scientific Conference on Technologies for Development, Lausanne, February 8-10, 2010.A process and a plant for hydrothermal SNG production from waste biomass
WO2011154226 . 2010.Impact Analysis of Carbon Tax on the Renewal Planning of Energy Supply System for an Office Building (vol 35, pg 1040, 2010)
Energy. 2010. DOI : 10.1016/j.energy.2010.07.012.Systems interactions analysis for the energy efficiency improvement of a Kraft process
Energy. 2010. DOI : 10.1016/j.energy.2010.08.002.Optimal Process Design of Hydrothermal SNG Production from Waste Biomass
2010. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2010), Lausanne, Switzerland, June 14-17, 2010.New generic approach for the analysis of energy conversion system models
2009. Process Systems Engineering, PSE’09, Salvador-Bahia-Brazil, August 16–20, 2009. p. 243 - 248. DOI : 10.1016/S1570-7946(09)70261-5.Analysis and comparison of hydrogen routes for automotive use
2009Synthesis and parameter optimization of a combined sugar and ethanol production process integrated with a CHP system Part 1: Minimization of the process external heat requirement
2009. 22 nd International Conference on E fficiency, Cost, Optimization Cop22nd International Conference on Efficiency, Cost, Optimization Simulation and Environmental Impact of Energy Systems, Foz do Iguaçu, Parana, Brazil, August 31-September 3, 2009.Monitoring and adaptation of existing buildings to a hydraulic network Impact of the retrofit of buildings and heat distribution systems on the system performance
2009Efficient energy conversion in a sulfite pulping process
2009. 8th World Congress of Chemical Engineering, Montreal, Canada, August 23-27, 2009.Process modeling and integration of fuel ethanol production from lignocellulosic biomass based on double acid hydrolysis
Energy & fuels. 2009. DOI : 10.1021/ef801027x.SYNTHESIS AND PARAMETER OPTIMIZATION OF A COMBINED SUGAR AND ETHANOL PRODUCTION PROCESS INTEGRATED WITH A CHP SYSTEM Part 2: Maximization of total site net power
2009. ECOS 2009, Foz do Iguaçu, Parana, Brazil, August 31-September 3, 2009.Thermo-economic Evaluation of H2 synthesis from Biomass
2009Methodology for the integration of low temperature district network in urban area
2009. 5th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems., Dubrovnik, September 30 to October 3, 2009.Predictive optimal management method for the control of polygeneration systems
2009. 18th European Symposium on Computer Aided Process Engineering (ESCAPE-18), Lyon, France, June 1-4, 2008. p. 1584 - 1592. DOI : 10.1016/j.compchemeng.2009.05.009.Simulation of Fuel Ethanol Production from Lignocellulosic Biomass
The Chinese Journal of Process Engineering. 2009. DOI : 10.3321/j.issn:1009-606X.2009.02.023.On the use of process integration techniques to generate optimal steam cycle configurations for the power plant industry
2009. 12th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Rome, ITALY, Feb 10-May 13, 2009. p. 171 - 176. DOI : 10.3303/CET0918026.Process integration and opportunity for heat pumps in industrial processes
2009. 22th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Foz do Iguaçu, Brazil, August 31 - September 3, 2009. p. 1381 - 1390.Thermo-economic process model for thermochemical production of Synthetic Natural Gas (SNG) from lignocellulosic biomass
Biomass and Bioenergy. 2009. DOI : 10.1016/j.biombioe.2009.08.004.Methodology for the optimal thermo-economic, multi-objective design of thermochemical fuel production from biomass
Computers & Chemical Engineering. 2009. DOI : 10.1016/j.compchemeng.2008.09.017.Thermodynamic analysis and heat integration of wood gasifier-SOFC systems
2009. 3rd European Fuel Cell Technology & Applications “Piero Lunghi Conference” EFC09, Rome, December 15 - 18, 2009.Energy System Analysis of a University Campus
2009Integrated Thermo-economic Modeling of Geothermal Resources for Optimal Exploitation Scheme Identification
2009Analysis of a biorefinery integration: application to a sulfite wood pulping process
2009. Papermaking Research Symposium, Kuopio, Finland, June 1-4, 2009.Analysis of a biorefinery integration in a bisulfite pulp process
2009. PAPTAC Annual Meeting 2009, Montreal, Canada, February 3-4, 2009.Process integration aspects of the design of a gas separation system for the upgrade of crude Synthetic Natural Gas (SNG) to grid quality in a wood to methane process
2009. 10th International Symposium on Process Systems Engineering - PSE2009, Salvador Bahia, Brazil, August 16-20, 2009. p. 903 - 908. DOI : 10.1016/S1570-7946(09)70371-2.Integration of LCA in a thermo-economic model for multi-objective process optimization of SNG production from woody biomass
2009. 19th European Symposium on Computer Aided Process Engineering, Cracow, June 14-17, 2009.Thermo-economic evaluation of the production of liquid fuels from biomass
2009Optimal Integration of Renewable Energy in Buildings Using Predictive Control
2009Thermo-economic integration of a steam reforming process with CO2 removal for gas turbine power generation.
2009Integration of LCA in a thermo-economic model for synthetic natural production from woody biomass
Alliance for Global Sustainability Annual Meeting 2009, Zürich, January 26-29, 2009.Integration of LCA in a thermo-economic model for multi-objective process optimization of SNG production from woody biomass
19th European Symposium on Computer Aided Process Engineering, Cracow, June 14-17 2008.Energy efficiency and conversion in complex integrated industrial sites : application to a sulfite pulping facility
Lausanne, EPFL, 2009. DOI : 10.5075/epfl-thesis-4433.Optimal energy system design under uncertain parameters
2009. PRES'09, Rome, May 10-13, 2009. p. 156 - 164. DOI : 10.3303/CET0918024.Optimal energy conversion system design under uncertain parameters
2009ENERGIS : A Geographical information based system for the evaluation of integrated energy conversion systems in urban areas
2008. ECOS 2008, Kraków, Poland, June 24 – 27, 2008.Design approach for the improvement of the economic and environmental performances of potable water supply
Lausanne, EPFL, 2008. DOI : 10.5075/epfl-thesis-4159.Energy management methods for the food industry
Handbook of water and energy management in food processing; Cambridge: CRC Press LLC, 2008. p. 221 - 254.Efficient Energy Conversion in a Sulfite Pulp Process
Smart Energy Strategies 2008, Zurich, September 8-10, 2008.A comparison of multi-objective optimisation approaches for a gas-phase refrigeration process
2008. 18th International Congress of Chemical and Process Engineering, Praha, August 24-28, 2008.Optimal process design for thermochemical production of fuels from biomass
Smart Energy Strategies, Zürich, September 8-10, 2008.Multi-objective design and optimization of district energy systems including polygeneration energy conversion technologies
Lausanne, EPFL, 2008. DOI : 10.5075/epfl-thesis-4018.Gas equilibrium and exergy analysis of the FICFB and Viking gasification concepts
2008. 11th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Prague, August 24-28, 2008.Heat Exchanger Network (HEN) costs and performances estimation for multi-period operation
Computer Aided Chemical Engineering. 2008.Predictive Optimal Management Method for the control of polygeneration systems
Computer Aided Chemical Engineering. 2008. DOI : 10.1016/S1570-7946(08)80059-4.Impact Analysis of Carbon Tax on the Renewal Planning of Energy Supply System for an Office Building
2008. ECOS 2008, Kraków, Poland, June 24 - 27, 2008. p. 1040 - 1046. DOI : 10.1016/j.energy.2009.06.023.Multi-objective optimization of RO desalination plants
Desalination. 2008. DOI : 10.1016/j.desal.2007.02.064.Energy integration study of a multi-effect evaporator
2008. PRES08: 11th Conference Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Praha (Czech Republic), August 24-28, 2008.Multi-Objective Design and Optimisation of Urban Energy Systems
Energy Systems Engineering; Weinheim: Wiley, 2008. p. 39 - 81.Multi-objective Design Optimization of a NGCC Power Plant with CO2 Capture Using Life Cycle Assessment Results
2008. ECOS 2008, UGH, Krakow, June 24 - 27, 2008.EnerGis : A geographical information based system for the evaluation of integrated energy conversion systems in urban areas.
2008 AGS Annual Meeting, Massachusetts Institute of Technology, Cambridge, MA USA, 28 - 31 January 2008.The simulation of building-integrated fuel cell and other cogeneration systems
2008Heat Exchanger Network (HEN) costs and performances estimation for multi-period operation
2008. 18th European Symposium on Computer Aided Process Engineering, Lyon, France, June 1-4, 2008.The challenge of introducing an exergy indicator in a local law on energy
Energy. 2008. DOI : 10.1016/j.energy.2007.10.012.Analyse énergétique d’évaporateurs par la méthode de la double représentation
2007Reducing carbon dioxide emissions by gas turbine processes | [CO2-Reduktion bei gasturbinen-prozessen]
Chemie Ingenieur Technik. 2007. DOI : 10.1002/cite.200750057.Energy conversion processes for the use of geothermal heat - Final report
2007Conceptual Design of a Combined Cycle Power Plant Using Existing Gas Turbines
2007Intégration optimale des coulages chaleur-force dans les systèmes urbains
Bulletin VSE/AES. 2007. DOI : 10.5169/seals-857447.An energy management method for the food industry
Applied Thermal Engineering. 2007. DOI : 10.1016/j.applthermaleng.2007.06.005.Methodology for the optimal thermo-economic, multi-objective design of thermochemical fuel production from biomass
2007. ESCAPE17, 17th European symposium on computer aided process engineering, Bucharest, Romania, 27.-30.5.2007. p. 1289 - 1294. DOI : 10.1016/S1570-7946(07)80239-2.Étude thermo-économique de l'intégration des pompes à chaleur industrielles
2007Evaluation of Natural Gas Combined Cycle Plants in China through Environomic Modeling and Multi-objective Optimization
2007. PRES 2007, Ischia Italie, 24 au 27 juin 2007.Selected pathways for a more efficient conversion of biomass in cogeneration or fuel production
2007. International Conference Engineering for Sustainable Energy in developing countries, Rio Cidade Nova Convention Center, Rio de Janeiro, Brazil, August, 15 - 18, 2007.Innovative design and multi-objective optimization of hybrid reverse osmosis and multi-stage flash desalination plants
CHISA, Prague, August 2007.Design and optimization of district energy systems
2007. PRES06, Prag, Czech Republic, August, 27-31 2006. p. 1127 - 1132.Web-based tools for energy management in large companies applied to food industry
Lausanne, EPFL, 2007. DOI : 10.5075/epfl-thesis-3785.Optimal process design for thermochemical biofuel production plants
Annual meeting of the Alliance for Global Sustainability (AGS), Barcelona, 18.-21.03.2007.Thermo-economic Optimization of a Solid Oxide Fuel Cell, Gas Turbine Hybrid System
Journal of Fuel Cell Science and Technology. 2007. DOI : 10.1115/1.2714564.Methodology for the optimal thermo-economic, multi-objective design of thermochemical fuel production from biomass
Computer Aided Chemical Engineering. 2007. DOI : 10.1016/S1570-7946(07)80239-2.Stratégie thermique pour le canton de Genève: réseau de distribution de chaleur et climatisation
2007Quand l'énergie est intégrée à la planification des quartiers du futur
L'AGEFI. 2006.A Model for Simulating the Thermal and Electrical Production of Small-Scale Solid-Oxide Fuel Cell Cogeneration Systems within Building Simulation Programs
HVAC&R Research. 2006. DOI : 10.1080/10789669.2006.10391199.Enhancing the quality of energy services in urban areas by means of renewable energy technologies and information and communication technologies in energy networks: issues, challenges and opportunities
2006. World Renewable Energy CongressIX, Florence, Florence, Italy, 19-25 August 2006.Concept énergétique de quartier; Application au cas des Rues Basses à Genève
2006Can steam play a role in low to medium power from low temperature heat?
2006. ASME 2006, Milano, Italy, 14 - 17 May 2006. p. 273 - 283.Environomic modeling and multi-objective optimisation of integrated energy systems for power and cogeneration
Lausanne, EPFL, 2006. DOI : 10.5075/epfl-thesis-3657.Methodology for process energy analysis: application to a sulfite wood pulping
2006. PRES06: 9th Conference Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Praha (Czech Republic), August 27-31, 2006.The challenge of introducing an exergy indicator in a local low on energy
2006. ECOS 2006, 19th International Conference, Capsis Hotel, Aghia Pelagia, Crete, Greece, 12-14 July 2006. p. 213 - 219.Innovative design and multi-objective optimization of hybrid reverse osmosis and multi-stage flash desalination plants
PRES 2006, Prag, 25-27 Août 2006.Thermo economic analysis for the optimal conceptual design of biomass gasification energy conversion systems
2006. PRES 2006, 9th Conference on Process Integration, Modelling and Optimisation, Prague, 27.8.-31.8..Thermo-economic optimisation of the integration of electrolysis in a wood to methane process
2006. ECOS 2006, 19th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Heraklion, Crete, Greece, 12.-14.07.2006.Quel potentiel pour les Biocarburants?
2005Advanced Power Plant Design Methodology using Process Integration and Multi-Objective Thermo-Economic Optimisation
2005. p. 777 - 784.Multi-objective Optimization of Energy Systems
2005Multi-objective optimisation of complex energy conversion systems
National Science Council of Taiwan, Taiwan, Rep. of China, 29.08.2005-04.09.2005.Projet PACOGEN, Evaluation économique et environnementale de systèmes énergétiques à usage résidentiel
2005Optimisation multi-objectifs pour la conception des systèmes énergétiques
séminaire EPFL, Lausanne, 08.03.2005.A Methodology for Thermo-Economic Modeling and Optimization of SOFC Systems
Chemical Engineering Transactions. 2005.Thermo-economic Optimization of a Solid Oxide Fuel Cell, Gas Turbine Hybrid System
2005. European Fuel Cell Conference, Roma, Italy, 14-16 dec. 2005.An energy management method for the food industry
2005. PRES05, Giardini di Naxos, May 15-18, 2005. p. 471 - 476.A dual representation for targeting process retrofit, application to a pulp and paper process
Applied Thermal Engineering. 2005. DOI : 10.1016/j.applthermaleng.2004.07.024.Une nouvelle méthode d'analyse thermique et son application aux procédés papetiers
ATIP (Association technique de l'industrie papetière), Annecy, 27 au 29 avril 2005.Combined Exergy and Pinch Analysis for Optimal Energy Conversion Technologies Integration
2005. p. 177 - 184.Multi-objective optimisation of fuel cell systems
National Science Council of Taiwan, Taiwan, Rep. of China, 29.08.2005-4.09.2005.Decentralized production in urban systems, the vision of the Institute of Energy Sciences of EPFL
2005. Swiss Environmental Solutions For Emerging Countries (SESEC IV - 2005), Lausanne, 5-7 October, 2005.Application of Multi-Objective Optimisation to Process Measurement System
2005. European Symposium on computer aided process engineering n15. p. 1153 - 1159. DOI : 10.1016/S1570-7946(05)80034-3.A proposed System-Level Model for Simulating the Thermal and Electrical Production of Solid-Oxide Fuel Cell Residential Cogeneration Devices within Whole-Building Simulation
2005.Network synthesis for district heating with multiple heat plants
2005. CIEM 2005, Bucharest, Romania, 20-21 october 2005. p. 347 - 354.Process design of Synthetic Natural Gas (SNG) production using wood gasification
Journal of Cleaner Production. 2005. DOI : 10.1016/j.jclepro.2005.04.009.Méthodologie de conception optimale d'un réseau hydrogène d'un site industriel
2005Thermo-Economic Modelling and Optimisation of Fuel Cell Systems
Fuel Cells. 2005. DOI : 10.1002/fuce.200400055.Optimization of an SOFC-based decentralized polygeneration system for providing energy services in an office-building in Tokyo
2004. p. 2985 - 3004.Design methodology for micro cogen systems
Targeting Method for the Retrofit Design of the Cogeneration System of Integrated Newsprint Mill
Data reconciliation and sampling protocol design, case of a paper deinking process
Paperi Ja Puu-Paper and Timber. 2004.A heat piloted 5 kW fuel cell
2004.Mass Integration of a Deinking Mill
2004. p. 97 - 103.A Methodology for the Optimal Insertion of Organic Rankine Cycles in Industrial Processes
2004.Multi-Criteria Optimization of an Advanced Combined Cycle Power Plant including CO2 Separation Options
2004. p. 263 - 275.Process flow model of solid oxide fuel cell system supplied with sewage biogas
Journal of Power Sources. 2004. DOI : 10.1016/j.jpowsour.2004.01.013.Multi-scale modeling methodology for computer aided design of a Solid Oxide fuel cell stack
2004. ESCAPE, Lisbonne, 2004. p. 1081 - 1086. DOI : 10.1016/S1570-7946(04)80246-3.Energy Integration and System Modelling of Fuel Cell Systems
2004Fermeture des circuits dans un procédé de désencrage: analyse et simulation
Pulp & Paper, Canada. 2004.Fuel Cell Modeling and Simulations
CHIMIA. 2004. DOI : 10.2533/000942904777677029.Optimization of an SOFC-based decentralized polygeneration system for providing energy services in an office-building in Tokyo
Green heating system: characteristics and illustration with multi-criteria optimization of an integrated energy system
Energy. 2004. DOI : 10.1016/j.energy.2003.09.003.Data Reconciliation and Sampling Protocol Design: The Case of a Paper Deinking Proces
2003Modélisation système SOFC dans l’environnement gPROMS
2003Multi-Criteria Optimization of Pulverized Fuel Coal-Fired Power Generation System Load Dispatching
2003. International Joint Power Generation Conference collocated with TurboExpo 2003, Atlanta, Georgia USA, June 16–19, 2003. p. 313 - 320. DOI : 10.1115/IJPGC2003-40155.Optimization of a fuel cell system using process integration techniques
Journal of Power Sources. 2003. DOI : 10.1016/S0378-7753(03)00107-1.Combined optimisation and process integration techniques for the synthesis of fuel cells systems
2003. 13th European Symposium on Computer Aided Process Engineering. p. 143 - 148. DOI : 10.1016/S1570-7946(03)80105-0.Application of Data Reconciliation to the Simulation of System Closure Options in a Paper Deinking Process
2003. p. 1001 - 1006. DOI : 10.1016/S1570-7946(03)80248-1.A Tool for Optimal Synthesis of Industrial Refrigeration Systems : Application to an Olefins Plant
2002.Optimisation of a fuel cell system using process integration techniques
Promotion de l'utilisation rationnelle de l'énergie dans l'industrie par PINCHLENI
2002Pompe à chaleur air-eau à Haute Température. Phase 2: cycle à injection optimisé, essai journaliers et compreseur booster. Analyse thermo-économique.
2002Intégration énergétique de procédés discontinus à l'aide d'algorithmes génériques.
2001process integration: Selection of the optimal utility system
Computers & Chemical Engineering. 1998. DOI : 10.1016/S0098-1354(98)00049-0.Energy integration of industrial sites: tools, methodology and applications
Applied Thermal Engineering. 1998. DOI : 10.1016/S1359-4311(98)00018-0.Identify the optimal pressure levels in steam networks using integrated Combined Heat and Power method
Chemical Engineering Science. 1997. DOI : 10.1016/S0009-2509(97)00102-4.Effect modeling and optimisation, a new methodology for combined energy and environment synthesis of industrial processes
Applied Thermal Engineering. 1997. DOI : 10.1016/S1359-4311(96)00079-8.Energy savings in methanol synthesis: Use of heat Integration Techniques and Simulation Tools
Computers & Chemical Engineering. 1997. DOI : 10.1016/S0098-1354(97)87553-9.Targeting the Minimum Cost of Energy Requirements: a new graphical technique for evaluating the integration of utility systems
Computers & Chemical Engineering. 1996. DOI : 10.1016/0098-1354(96)00048-8.a methodology for energy integration and optimal heat exchanger network synthesis
Computers & Chemical Engineering. 1989. DOI : 10.1016/0098-1354(89)85044-6.Enseignement et PhD
Doctorant·es actuel·les
Julie Rose Dutoit, Pullah Bhatnagar, Naveen Bhati, Sai Sudharshan Ravi, Dareen Dardor, Dorsan Lepour, Soline Corre, Marie Jones, Sanjay Venkatachalam, Vibhu Baibhav, Mael Camil Mouhoub, Yi Zhao, Louis Merceron, Cédric Terrier, Arthur Waeber, Arthur Chuat, Alberto Follo
A dirigé les thèses EPFL de
Damien Muller, François Vince, Zoé Périn-Levasseur, Raffaele Bolliger, Martin Gassner, Luc Girardin, Matthias Dubuis, Helen Carla Becker, Léda Gerber, Laurence Tock, Juan David Villegas Gomez, Jairo Alexander Lozano Moreno, Samira Fazlollahi, Levent Sinan Teske, Jakob Rager, Nasibeh Pouransari, Emanuela Peduzzi, Matthias Bendig, Zlatina Kirilova Dimitrova, Samuel Henchoz, Stéphane Laurent Bungener, Alberto Mian, Ramanunni Parakkal Menon, Alexandre Suzanne Jean-Marie Bertrand, Stefano Moret, Sébastien Cajot, Elfie Marie Méchaussie, Maziar Kermani, Victor Codina Gironès, Nils Christian Schüler, Anna Sophia Wallerand, Paul Michael Stadler, Lorenzo Nespoli, Ayse Dilan Celebi, Raluca-Ancuta Suciu, Hür Ebuzer Bütün, Frédéric Louis-Pierre Raphaël Marie Amblard, Shanshan Hsieh, Francesca Belfiore, Xun Liao, Alessio Santecchia, Luise Middelhauve, Xiang Li, Rafael Amorim Leandro De Castro Amoedo, Julia Granacher, Emanuele Piccoli, Jonas Schnidrig, Xinyi Wei, Ziqian Wang
A co-dirigé les thèses EPFL de
Yves Jon Césare Loerincik, Hongtao Li, Céline Weber, Emanuele Facchinetti, Amirreza Heidari
Cours
Advanced energetics
ME-451
Méthodes pour l'utilisation rationnelle et la conversion de l'énergie dans les processus industriels: comment analyser l'utilisation de l'énergie, calculer la récupération de chaleur par analyse de pincement, définir le réseau d'échangeurs thermiques et réaliser une analyse exergétique.
Biomass conversion
ENG-618
The learning outcomes are to get to know the biomass ressources and its characteristics; study of biomass conversion pathways and study of process flow-sheets; establish the flow diagram of an industrial process with biomass as feedstock and calculate the corresponding mass and energy balances; etc
Energy conversion and renewable energy
ME-409
Le cours donne un aperçu (i) du système énergétique actuel, (ii) des principes techniques des systèmes de conversion d'énergie (fossiles, nucléaires et renouvelables), et (iii) de leurs aspects économiques et environnementaux.
Modelling and optimization of energy systems
ME-454
Ce cours présente les techniques de modélisation et l'optimisation thermo-économique des procédés industriels et des systèmes énergétiques. Il couvre également l'étude de cas, les méthodes de résolution pour la simulation et les problèmes d'optimisation à un ou plusieurs objectifs.
Modelling, optimisation, design and analysis of integrated energy systems
ME-602
The student will learn advanced concepts in the field of process integration, process modeling and optimization for the design of integrated energy systems: Life cycle energy analysis.
Process development
ChE-459
A travers un projet, ce cours introduira les étapes clé dans le développement d'un procédé chimique, du laboratoire à l'échelle industrielle. L'accent sera mis sur l'étude de procédés qui contribuent à la decarbonisation de l'industrie.