François Maréchal
EPFL Valais Wallis
EPFL IPESE (SCI-STI-FM)
Rue de l'Industrie 17
1951 Sion
+41 21 693 35 16
+41 21 693 35 06
Office: ME A2 465
EPFL › STI › IGM › SCI-STI-FM
Site web: https://ipese.epfl.ch
+41 21 693 35 16
EPFL › STI › STI-SGM › SGM-ENS
Expertise
See english version
Mission
see english version
En 2022 : François Maréchal est classé par research.com dans le top 10 des chercheurs suisses dans le domaine de l’ingénierie et de la technologie. Il est titulaire d’un diplôme d’ingénieur en génie des procédés (1986) et d’un doctorat de l’Université de Liège en Belgique (1995), où il a réalisé un doctorat dans le domaine de l’intégration des procédés des sites industriels. En 2001, il a rejoint l’Ecole Polytechnique Fédérale de Lausanne (EPFL) en Suisse où il est professeur à l’EPFL sur le Campus Valais Wallis de l’EPFL, à la tête du groupe d’Ingénierie des Procédés Industriels et des Systèmes Energétiques. Il mène des recherches dans le domaine de l’aide à la décision assistée par ordinateur pour l’ingénierie des processus et des systèmes énergétiques. Ses activités se concentrent sur l’intégration de l’utilisation rationnelle de l’énergie, des ressources énergétiques renouvelables et des concepts d’économie circulaire dans la conception des processus industriels et des systèmes énergétiques.
François Maréchal est le membre fondateur et ancien co-président de la section énergie de la Fédération européenne de génie chimique et représente la Suisse au sein du groupe de travail sur l’utilisation des ordinateurs en génie chimique de la Fédération européenne de génie chimique. François Marechal est rédacteur en chef de la spécialité “Process and Energy Systems Engineering” de la revue en libre accès “Frontiers in Energy Research”.
François Maréchal est le membre fondateur et ancien co-président de la section énergie de la Fédération européenne de génie chimique et représente la Suisse au sein du groupe de travail sur l’utilisation des ordinateurs en génie chimique de la Fédération européenne de génie chimique. François Marechal est rédacteur en chef de la spécialité “Process and Energy Systems Engineering” de la revue en libre accès “Frontiers in Energy Research”.
Formation
|
1986 – 1986 Université de Liège (Belgium)
|
1995 – 1995
University of Liège (Belgium)
Dirigée par
Prof Boris KalitventzeffLaboratoire d'analyse et de synthèse des systèmes chimiques
Expériences professionnelles
Maitre d'enseignement de Recherche
1er ingénieur de recherche
District heating and cooling energy network using CO2 as a heat and mass transfer fluid
Heat Pumping Technologies MAGAZINE. 2018.Key Energy and Technological Aspects of Three Innovative Concepts of District Energy Networks
Energy. 2016. DOI : 10.1016/j.energy.2016.05.065.Key energy and technological aspects of three innovative concepts of District energy networks
2015. ECOS 2015, Pau, France, June 29-July 3, 2015.Biomass To Liquids : Thermo-Economic Analysis and Multi-Objective Optimisation
Lausanne, EPFL, 2015. DOI : 10.5075/epfl-thesis-6529.Urban Energy System Design from the Heat Perspective using mathematical Programming including thermal Storage
Lausanne, EPFL, 2015. DOI : 10.5075/epfl-thesis-6731.Exergy representations in thermodynamics
2015. HEFAT.Towards practical solutions for energy efficiency of large-scale industrial sites
Lausanne, EPFL, 2015. DOI : 10.5075/epfl-thesis-6390.Integration of Organic Rankine Cycles for Waste Heat Recovery in Industrial Processes
Lausanne, EPFL, 2015. DOI : 10.5075/epfl-thesis-6536.Swiss-EnergyScope.ch: a Platform to Widely Spread Energy Literacy and Aid Decision-Making
2014. 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2014). p. 877 - 882. DOI : 10.3303/Cet1439147.Integrating Rate Based Models into a Multi-Objective Process Design & Optimisation Framework using Surrogate Models
Lausanne, EPFL, 2014. DOI : 10.5075/epfl-thesis-6302.Design & Optimisation of an Innovative Solid Oxide Fuel Cell – Gas Turbine Hybrid Cycle for Small Scale Distributed Generation
Fuel Cells. 2014. DOI : 10.1002/fuce.201300196.Methodology for Identification of Suitable ORC-Cycle and Working-Fluid using Integration with Multiple Objectives
2014. 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2014)', 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2014). p. 1141 - 1146. DOI : 10.3303/Cet1439191.Application of dynamic building simulation for the study of urban energy systems
2013Heat Integration and Exergy Analysis of Reactors
2013Site-scale process integration and utility optimization with multiple representations of heating and cooling requirements: Application to an existing chemical plant
2013. 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Guilin, China, 2013-07-16 - 2013-07-19.Thermo-environomic evaluation of the ammonia production
2013. XIVe Congrès SFGP, Lyon, France, October 8-10, 2013.Dynamic Modeling and Simulation of Two-phase Evaporators and Condensers in the context of a CO2 Based District Energy Network
2013. 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Guilin, China, 2013-07-16 - 2013-07-19.Energy integration optimisation of chilled ammonia process for CO2 capture
2013. 9th European Congress of Chemical Engineering, The Hague, The Netherlands, April 21-25, 2013.INTEGRATION OF A SEASONAL STORAGE
2013Evaluation of advanced technologies based on integration techniques - Application on dividing wall column
2013ECOS: Integrated and practical energy planning for new districts
2013. 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Guilin, China, 2013-07-16 - 2013-07-19.Life Cycle Assessment and Environomic Optimization of Concentrating Solar Thermal Power Plants
2013. 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Guilin, China, 2013-07-16 - 2013-07-19.Demand Side Management et réseaux CAD
2013ECOS: Solar Potential Assessment on Roofs of Urban Areas and its Integration
2013. 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Guilin, China, 2013-07-16 - 2013-07-19.The role of process integration techniques in the thermo-economic optimization of energy conversion systems
International Process Integration Jubilee Conference, Gothenburg, Sweden, March 18-20, 2013.MEU: An urban energy management tool for communities and multi-energy utilities
2013. CISBAT 2013, Lausanne, Switzerland, September 4-6, 2013.Design of solar driven supercritical water desalination plant
2013Energy efficiency improvement by applying thermodynamic optimization of distillation columns in the site scale integration
2013. 14th Congrès de la Société Française de Génie des Procédés, Lyon, France, Octobre 8-10, 2013.Process engineering method for systematically comparing CO2 capture options
2013. 23rd European Symposium on Computer Aided Process Engineering (ESCAPE). p. 367 - 372. DOI : 10.1016/B978-0-444-63234-0.50062-2.Potentiel thermo-économique d’un réseau CO2 appliqué à divers environnements urbains
2013Increasing Efficiency of Fuel Ethanol Production from Lignocellulosic Biomass by Process Integration
Energy & Fuels. 2013. DOI : 10.1021/ef301952u.A methodology for creating sequential multi-period base-case scenarios for large data sets
2013. PRES, Rhodes, Greece, September 29 - October 2, Greece. p. 1231 - 1236. DOI : 10.3303/CET1335205.Process Integration of Lignocellulosic Biomass Pre-treatment in the Thermo-Chemical Production of F-T Fuels. Centralised Versus Decentralised Scenarios
2013. PRES13 - 16th Conference Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Rhodes, Greece, 29 September - 2 October.Thermo-environomic optimisation of fuel decarbonisation alternative processes for hydrogen and power production
Lausanne, EPFL, 2013. DOI : 10.5075/epfl-thesis-5655.Multi-Layer Representation of Energy Requirement for Site Scale Integration
International Process Integration Jubilee, Gothenburg, Chalmers, Sweden, March 18-20, 2013.Overview over the design (and planning) of Urban energy systems
2013Method for Combined Water-Energy Recovery in Industrial Processes
2013Thermo-chemical production of F-T fuels from lignocellulosic biomass: Heat integration of gasification
2013. XIVeme Congres SFGP 2013, Lyon, France, Octobre 8-10.Methodology using process integration for identifying suitable Organic Rankine Cycles for waste heat valorisation
International Process Integration Jubilee Conference 2013, Gothenburg, Sweden, March 18-20, 2013.H2 processes with CO2 mitigation: Thermo-economic modeling and process integration
International Journal of Hydrogen Energy. 2012. DOI : 10.1016/j.ijhydene.2012.05.046.Modélisation et optimisation de système énergétique intégré dans un environnement urbain composé de plusieurs bâtiments
2012Polymer spiral film gas-liquid heat exchanger for waste heat recovery in exhaust gases
2012CHARACTERIZATION OF THE THERMOECONOMIC OPTIMIZATION PROBLEM OF AN ELECTRICITY STORAGE SYSTEM BASED ON THEORETICAL THERMODYNAMIC CYCLES
2012Enjeux de la compensation CO2 en Suisse - présentation d’une méthodologie pour la comparaison des projets
2012Thermo-economic analysis and modeling of oxyfuel processes
2012A Techno Assessment of Different Solvent- based Capture Technologies Within an IGCC-CCS Power-station
2012Platform development for studying integrated energy conversion processes: Application to a power plant process with CO2 capture
2012. 11th International Symposium on Process Systems Engineering, Singapore, July 15-19, 2012. p. 1015 - 1019. DOI : 10.1016/B978-0-444-59506-5.50034-1.THERMOECONOMIC ANALYSIS AND OPTIMISATION OF AIR-BASED BOTTOMING CYCLES FOR WATER-FREE HYBRID SOLAR GAS-TURBINE POWER PLANTS
2012Multi-Objective Optimisation of District Energy Systems
2012Study of the Integration of District Heating and Cooling with an Electro-Thermal Energy Storage System
2012Design of geothermal energy conversion systems with a life cycle assessment perspective
2012. 37th Stanford Geothermal Workshop, Stanford, California, USA, January 30 - February 1, 2012.Trigeração de alta eficiência em sistemas de energia integrados
COGERAÇÃO. 2012.Integration of Life Cycle Assessment in the conceptual design of renewable energy conversion systems
Lausanne, EPFL, 2012. DOI : 10.5075/epfl-thesis-5564.Methodology and Thermo-Economic Optimization for Integration of Industrial Heat Pumps
Lausanne, EPFL, 2012. DOI : 10.5075/epfl-thesis-5341.THERMAL STORAGE AIMING AT INCREASING THE SHARE OF USED HEAT REJECTED FROM A COOLING PROCESS
2012Optimisation of CO2 based heating networks in urban areas
2012Chauffe repas Solar Impulse
2012Application of Exergy Analysis in Energy Requirements Assay of the Typical Process Unit Operations of Chemical Industries
2012THERMO-ENVIRONOMIC EVALUATION OF AMMONIA PRODUCTION
2012Physical absorption processes modeling and analysis for CO2 capture
2012Enthalpy and exergy analysis in the framework of a district scale energy balance
2012A GIS-based Methodology for the Evaluation of Integrated Energy Systems in Urban Area
Lausanne, EPFL, 2012. DOI : 10.5075/epfl-thesis-5287.Integrated Solid Oxide Fuel Cell : Gas Turbine Hybrid Systems with or without CO2 Separation
Lausanne, EPFL, 2012. DOI : 10.5075/epfl-thesis-5323.A GENERAL AND OPERATIONAL METHODOLOGY FOR ENERGY EFFICIENCY OF INDUSTRIAL CHEMICAL PROCESSES
Journée de thesard de Rhodia, Lyon, France, Nov 15, 2012.Energy system design under uncertainty
Lausanne, EPFL, 2012. DOI : 10.5075/epfl-thesis-5559.Defining the potential of usable waste heat in industrial processes with the help of pinch and exergy analysis
2012. 15th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Prague, Czech Republic, August 25-29, 2012. p. 103 - 108. DOI : 10.3303/CET1229018.Urban Energy System Analysis
2012Environmental and economic analysis of the heating of a building
2012CO2 mitigation in thermo-chemical hydrogen processes: Thermo-environomic comparison and optimization
Energy Procedia. 2012. DOI : 10.1016/j.egypro.2012.09.072.APPLICATION OF EXERGY ANALYSIS IN ENERGY REQUIREMENT ASSAY OF THE TYPICAL PROCESS UNIT OPERATIONS
2012Assessment of Environmental Impacts Related to Shale Gas Extraction in the Polish Contex
2012Performance evolution and modeling of PEM fuel cell systems
2012Co-production of Hydrogen and Electricity from Lignocellulosic Biomass: Process Design and Thermo-economic Optimization
2011. 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Novi Sad, Serbia, July 4-7, 2011. p. 339 - 349. DOI : 10.1016/j.energy.2012.01.056.ECOS 2010 Volume III (Cycles & Buildings)
2011. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy System (ECOS2010).Life Cycle Analysis and Thermo-Environomic Optimization of Concentrated Solar Thermal Power Plants
2011Concept énergétique du futur complexe sportif des Prés-de-Vidy
2011From science to application in Geneva: best practice example from theoretical concept on exergy over a law into everyday life of a citizen
2011. World Engineers' Convention, Geneva, Switzerland, September 4-9, 2011.Design and optimization of district energy systems, including renewable systems, wastewater treatment and poly-generation technologies
2011Méthode d’analyse combinée eau-énergie Validation et application à un cas papetier
2011Process integration aspects in the design of biofuel processes
BBEST 2011 : 1st Brazilian BioEnergy Science and Technology Conference, Campos do Jordao, August 14-18,2011.Innovative Hybrid Cycle Solid Oxide Fuel Cell-Inverted Gas Turbine with CO2 Separation
2011. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Lausanne, Switzerland, June 14-17, 2010. p. 565 - 572. DOI : 10.1002/fuce.201000130.ECOS 2010 Volume V (Fuel cell & Internal combustion engines)
2011. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy System (ECOS2010).The Optimized Integration of Biomass Fuel in the District Energy System in Poznan, Poland: Part 1
2011Analyse énergétique d’un quartier et étude d’un réseau de chauffage à distance, La Chaux-de-Fonds
2011Optimal Process Design for Power Production from Wet Waste Biomass by Hydrothermal Gasification coupled to a Solid Oxide Fuel Cell
2011ECOS 2010 Volume I (Thermodynamics)
2011. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy System (ECOS2010).Optimal process design for the polygeneration of SNG, power and heat by hydrothermal gasification of waste biomass: Process optimisation for selected substrates
Energy & Environmental Science. 2011. DOI : 10.1039/c0ee00634c.Defining Optimal Configurations of Geothermal Systems Using Process Design and Process Integration Techniques
2011. 14th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Florence, Italy, May 8-11, 2011. p. 881 - 886. DOI : 10.3303/CET1125147.Bilan de Vapeur et optimisation énergétique de la raffinerie de Collombey
2011A general and operational methodology for energy efficiency of industrial chemical processes
2011. 13th Congrès de la Société Française de Génie des Procédés (SFGP), Lille Grand palais, 29 Nov-1 Dec, 2011.Thermo-chemical H2 production: Thermo-economic modeling and process integration
2011. European Fuel Cell Forum, Lucerne, Switzerland, June 28- July 1, 2011.Développement d'une méthode pour le calcul d'un indicateur de rendement exergétique
2011Process integration and opportunities for heat pumps in industrial processes
International Journal of Thermodynamics. 2011.Optimisation Multi-Objectifs: Application au procédé de purification de bioéthanol
2011Etude thermoéconomique de l'apport du stockage thermique dans une centrale de chauffe équipée d'une cogénération et d'une pompe à chaleur
2011Intégration énergétique dans des procédés multi-périodes appliqués en milieu urbain
2011From science to application in Geneva: best practice example from theoretical concept on exergy over a law into everyday life of a citizen
2011. World Engineers' Convention, Geneva, Switzerland, September 4-9, 2011.ECOS 2010 Volume II (Biomass & Renewable)
2011. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy System (ECOS2010).Systèmes hybrides pour les installations de géothermie profondes: cas d'étude de La Chaux-de-Fonds
2011Étude de la pompe à chaleur comme unité de conversion d’énergie renouvelable
2011The Optimized Integration of Biomass Fuel in the District Heating System in Poznan, Poland: Part 2
2011Thermo-economic evaluation of coal power plants with CO2 capture
2011ECOS 2010 Volume IV (Power plants & Industrial processes)
2011. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy System (ECOS2010).A Multi-Objective Optimization Method to integrate Heat Pumps in Industrial Processes
2011. 21st European Symposium on Computer Aided Process Engineering – ESCAPE 21, Chalkidiki, Greece, May 29 - June 1, 2011. p. 1673 - 1677. DOI : 10.1016/B978-0-444-54298-4.50113-6.Multi-objective investment and operating optimization of energy systems with integer cut constraints and evolutionary algorithm
2011. ECOS2011:The 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Novi Sad, Serbia, July 4–7, 2011.Multi-Objective Design and Optimization of District Energy Systems, Including Renewable energy
2011Heat pump integration in a cheese factory
2011. 14th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Florence, Italy, May 8-11, 2011. p. 195 - 200. DOI : 10.3303/CET1125033.Renewable energy solutions for Clip-Air project
2011Systematic integration of LCA in process systems design: Application to combined fuel and electricity production from lignocellulosic biomass
Computers & Chemical Engineering. 2011. DOI : 10.1016/j.compchemeng.2010.11.012.Process design methods for sustainable energy systems
National Technical University of Athens, Erasmus exchange Seminar, National Technical University of Athens, February 17, 2011.Heat Pump Integration Into Urban Energy Systems
2011Hybrid Cycle SOFC - Inverted Gas Turbine with CO2 Separation
EP2449229 ; US9228494 ; US2012117979 ; EP2449229 ; WO2011001311 ; WO2011001311 . 2011.Analysis of the economic criteria used in energy efficiency optimization of industrial systems
2011Multi-Objective Optimization of Biomass Conversion Technologies by Using Evolutionary Algorithm and Mixed Integer Linear Programming (MILP)
2011. European Conference on Polygeneration, Tarragona, Spain, March 30-April-1, 2011.Base case process development for energy efficiency improvement, application to a Kraft pulping mill. Part II: Benchmarking analysis
Chemical Engineering Research & Design. 2011. DOI : 10.1016/j.cherd.2010.09.013.An environmental optimization model for bioenergy plant sizes and locations for the case of wood-derived SNG in Switzerland
2011. World Renewable Energy Congress 2011- Sweden, Linköping, Sweden, May 8-11, 2011.Heat Pump Integration in Industrial Processes -II
2011Optimisation thermo-économique d’une ligne de séchage industrielle
2011A systematic methodology for the synthesis of unit process chains using Life Cycle Assessment and Industrial Ecology Principles
2011. 21st European Symposium on Computer-Aided Process Engineering, Porto Carras Resort, Chalkidiki, Greece, May 29 - June 1, 2011. p. 1215 - 1219. DOI : 10.1016/B978-0-444-54298-4.50022-2.A process and a plant for hydrothermal SNG production from waste biomass
WO2011154226 . 2010.Optimal Process Design of Hydrothermal SNG Production from Waste Biomass
2010. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2010), Lausanne, Switzerland, June 14-17, 2010.Process Integration Analysis of an Industrial Hydrogen Production Process
2010. WHEC2010; 18th World Hydrogen Energy Conference 2010, Essen, Germany, May 16-21, 2010.Optimal technologies for the thermochemical production of Synthetic Natural Gas (SNG) from lignocellulosic biomass
18th European Biomass Conference and Exhibition, Lyon, France, May 3-7, 2010.Thermo-economic Evaluation of the Thermochemical Production of Liquid Fuels from Biomass
2010. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2010), Lausanne, Switzerland, June 14-17, 2010.Management Energétique Urbain - Neuchâtel
2010Conception d'un outil d'optimisation de performance environnementale utilisant l'analyse de cycle de vie et les concepts de l'écologie industrielle
2010Analyse énergétique d'un procédé de pâte Kraft
2010Process Integration Analysis of an Industrial Hydrogen Production Process
WHEC2010; 18th World Hydrogen Energy Conference 2010, Essen, Germany, May 16-21, 2010.Thermo-economic modeling of CO2 capturing processes
2010WWTP optimizations studies using gPROMS
Methodology for the identification of optimal exploitation schemes of geothermal systems
CCES Latsis Symposium 2010, Zürich, Switzerland, November 17-19, 2010.Intégration énergétique d’un procédé agroalimentaire à l’aide de la plateforme internet PinchLight
2010Solar Potential Assessment on Roofs of Urban Areas and its Integration
2010. EPFL / UNESCO Chair International Scientific Conference on Technologies for Development, Lausanne, February 8-10, 2010.Thermo-economic modeling of fuel decarbonization processes
CCES Latsis Symposium 2010, Zürich, Switzerland, November 15-17, 2010.Thermo-economic analysis of chemical looping processes
2010Études d'options énergétiques pour le quartier "Etraz-Sud"
2010Environomic optimization of SNG production from lignocellulosic biomass using Life Cycle Assessment
2010. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Lausanne, Switzerland, June 14-17, 2010.Concept énergétique du développement urbain de la Commune de Nyon
2010Power and cogeneration technology environomic performance typification in the context of CO2 abatement part II: Combined heat and power cogeneration
Energy. 2010. DOI : 10.1016/j.energy.2010.03.042.Systems interactions analysis for the energy efficiency improvement of a Kraft process
Energy. 2010. DOI : 10.1016/j.energy.2010.08.002.Complete Advanced Energetics Course Notes
2010.Application of the district cooling/heating network design models in the GLN area
2010Méthodologie de la synthèse des systèmes énergétiques industriels
Lausanne, EPFL, 2010. DOI : 10.5075/epfl-thesis-4867.Combined mass and energy integration in process design at the example of membrane-based gas separation systems
Computers & Chemical Engineering. 2010. DOI : 10.1016/j.compchemeng.2010.06.019.Experimental Real-Time Optimization of a Solid Oxide Fuel Cell Stack via Constraint Adaptation
2010. 23rd Int. Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Lausanne, June 14-17, 2010. p. 141 - 148.Strategy for the identification of optimal exploitation schemes of geothermal systems
European Geothermal PhD Day 2010, Potsdam, February 11-12 2010.Process Design Methodology for Thermochemical Production of Fuels from Biomass : Application to the Production of Synthetic Natural Gas from Lignocellulosic Resources
Lausanne, EPFL, 2010. DOI : 10.5075/epfl-thesis-4693.Thermochemical production of liquid fuels from biomass: Thermo-economic modeling, process design and process integration analysis
Biomass and Bioenergy. 2010. DOI : 10.1016/j.biombioe.2010.07.018.Process Integration and Energy Conversion in a Natural Gas Refinery
2010Increasing Conversion Efficiency in Fuel Ethanol Production from Lignocellulosic Biomass by Polygeneration - and a Paradoxon between Energy and Exergy in Process Integration
2010. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2010), Lausanne, Switzerland, June 14-17, 2010.Integrated Thermo-Economic Modelling of Geothermal Resources for Optimal Exploitation Scheme Identification
2010. 23rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Lausanne, Switzerland, June 14-17, 2010.Impact Analysis of Carbon Tax on the Renewal Planning of Energy Supply System for an Office Building (vol 35, pg 1040, 2010)
Energy. 2010. DOI : 10.1016/j.energy.2010.07.012.Power and cogeneration technology environomic performance typification in the context of CO2 abatement part I: Power generation
Energy. 2010. DOI : 10.1016/j.energy.2010.03.004.Outils et méthodes pour intégrer les ressources, demandes et technologies de conversion à l’échelle d’un projet urbain
Master of Advanced Studies HES-SO en Energie et développement durable dans l’environnement bâti 2009-2012, Lausanne, juin 4, 2010.Study on the definition of dTmin for heat recovery
2010Utility Optimization in a Brewery Process Based on Energy Integration Methodology
2010. The 23th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Lausanne, Switherland, June 14-18, 2010. p. 91 - 98.Process integration and opportunity for heat pumps in industrial processes
2009. 22th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Foz do Iguaçu, Brazil, August 31 - September 3, 2009. p. 1381 - 1390.Thermo-economic Evaluation of H2 synthesis from Biomass
2009Thermo-economic process model for thermochemical production of Synthetic Natural Gas (SNG) from lignocellulosic biomass
Biomass and Bioenergy. 2009. DOI : 10.1016/j.biombioe.2009.08.004.Predictive optimal management method for the control of polygeneration systems
2009. 18th European Symposium on Computer Aided Process Engineering (ESCAPE-18), Lyon, France, June 1-4, 2008. p. 1584 - 1592. DOI : 10.1016/j.compchemeng.2009.05.009.Energy efficiency and conversion in complex integrated industrial sites : application to a sulfite pulping facility
Lausanne, EPFL, 2009. DOI : 10.5075/epfl-thesis-4433.Optimal energy system design under uncertain parameters
2009. PRES'09, Rome, May 10-13, 2009. p. 156 - 164. DOI : 10.3303/CET0918024.Integration of LCA in a thermo-economic model for multi-objective process optimization of SNG production from woody biomass
19th European Symposium on Computer Aided Process Engineering, Cracow, June 14-17 2008.Integration of LCA in a thermo-economic model for synthetic natural production from woody biomass
Alliance for Global Sustainability Annual Meeting 2009, Zürich, January 26-29, 2009.On the use of process integration techniques to generate optimal steam cycle configurations for the power plant industry
2009. 12th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Rome, ITALY, Feb 10-May 13, 2009. p. 171 - 176. DOI : 10.3303/CET0918026.Thermo-economic integration of a steam reforming process with CO2 removal for gas turbine power generation.
2009Analysis and comparison of hydrogen routes for automotive use
2009Monitoring and adaptation of existing buildings to a hydraulic network Impact of the retrofit of buildings and heat distribution systems on the system performance
2009Efficient energy conversion in a sulfite pulping process
2009. 8th World Congress of Chemical Engineering, Montreal, Canada, August 23-27, 2009.Synthesis and parameter optimization of a combined sugar and ethanol production process integrated with a CHP system Part 1: Minimization of the process external heat requirement
2009. 22 nd International Conference on E fficiency, Cost, Optimization Cop22nd International Conference on Efficiency, Cost, Optimization Simulation and Environmental Impact of Energy Systems, Foz do Iguaçu, Parana, Brazil, August 31-September 3, 2009.Process integration aspects of the design of a gas separation system for the upgrade of crude Synthetic Natural Gas (SNG) to grid quality in a wood to methane process
2009. 10th International Symposium on Process Systems Engineering - PSE2009, Salvador Bahia, Brazil, August 16-20, 2009. p. 903 - 908. DOI : 10.1016/S1570-7946(09)70371-2.Methodology for the integration of low temperature district network in urban area
2009. 5th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems., Dubrovnik, September 30 to October 3, 2009.Thermodynamic analysis and heat integration of wood gasifier-SOFC systems
2009. 3rd European Fuel Cell Technology & Applications “Piero Lunghi Conference” EFC09, Rome, December 15 - 18, 2009.Optimal Integration of Renewable Energy in Buildings Using Predictive Control
2009Thermo-economic evaluation of the production of liquid fuels from biomass
2009Methodology for the optimal thermo-economic, multi-objective design of thermochemical fuel production from biomass
Computers & Chemical Engineering. 2009. DOI : 10.1016/j.compchemeng.2008.09.017.New generic approach for the analysis of energy conversion system models
2009. Process Systems Engineering, PSE’09, Salvador-Bahia-Brazil, August 16–20, 2009. p. 243 - 248. DOI : 10.1016/S1570-7946(09)70261-5.SYNTHESIS AND PARAMETER OPTIMIZATION OF A COMBINED SUGAR AND ETHANOL PRODUCTION PROCESS INTEGRATED WITH A CHP SYSTEM Part 2: Maximization of total site net power
2009. ECOS 2009, Foz do Iguaçu, Parana, Brazil, August 31-September 3, 2009.Optimal energy conversion system design under uncertain parameters
2009Simulation of Fuel Ethanol Production from Lignocellulosic Biomass
The Chinese Journal of Process Engineering. 2009. DOI : 10.3321/j.issn:1009-606X.2009.02.023.Integration of LCA in a thermo-economic model for multi-objective process optimization of SNG production from woody biomass
2009. 19th European Symposium on Computer Aided Process Engineering, Cracow, June 14-17, 2009.Process modeling and integration of fuel ethanol production from lignocellulosic biomass based on double acid hydrolysis
Energy & fuels. 2009. DOI : 10.1021/ef801027x.Analysis of a biorefinery integration in a bisulfite pulp process
2009. PAPTAC Annual Meeting 2009, Montreal, Canada, February 3-4, 2009.Analysis of a biorefinery integration: application to a sulfite wood pulping process
2009. Papermaking Research Symposium, Kuopio, Finland, June 1-4, 2009.Integrated Thermo-economic Modeling of Geothermal Resources for Optimal Exploitation Scheme Identification
2009Energy System Analysis of a University Campus
2009ENERGIS : A Geographical information based system for the evaluation of integrated energy conversion systems in urban areas
2008. ECOS 2008, Kraków, Poland, June 24 – 27, 2008.Optimal process design for thermochemical production of fuels from biomass
Smart Energy Strategies, Zürich, September 8-10, 2008.Heat Exchanger Network (HEN) costs and performances estimation for multi-period operation
2008. 18th European Symposium on Computer Aided Process Engineering, Lyon, France, June 1-4, 2008.EnerGis : A geographical information based system for the evaluation of integrated energy conversion systems in urban areas.
2008 AGS Annual Meeting, Massachusetts Institute of Technology, Cambridge, MA USA, 28 - 31 January 2008.The simulation of building-integrated fuel cell and other cogeneration systems
2008Multi-Objective Design and Optimisation of Urban Energy Systems
Energy Systems Engineering; Weinheim: Wiley, 2008. p. 39 - 81.Multi-objective design and optimization of district energy systems including polygeneration energy conversion technologies
Lausanne, EPFL, 2008. DOI : 10.5075/epfl-thesis-4018.A comparison of multi-objective optimisation approaches for a gas-phase refrigeration process
2008. 18th International Congress of Chemical and Process Engineering, Praha, August 24-28, 2008.Energy management methods for the food industry
Handbook of water and energy management in food processing; Cambridge: CRC Press LLC, 2008. p. 221 - 254.Design approach for the improvement of the economic and environmental performances of potable water supply
Lausanne, EPFL, 2008. DOI : 10.5075/epfl-thesis-4159.Multi-objective Design Optimization of a NGCC Power Plant with CO2 Capture Using Life Cycle Assessment Results
2008. ECOS 2008, UGH, Krakow, June 24 - 27, 2008.Heat Exchanger Network (HEN) costs and performances estimation for multi-period operation
Computer Aided Chemical Engineering. 2008.Impact Analysis of Carbon Tax on the Renewal Planning of Energy Supply System for an Office Building
2008. ECOS 2008, Kraków, Poland, June 24 - 27, 2008. p. 1040 - 1046. DOI : 10.1016/j.energy.2009.06.023.Efficient Energy Conversion in a Sulfite Pulp Process
Smart Energy Strategies 2008, Zurich, September 8-10, 2008.The challenge of introducing an exergy indicator in a local law on energy
Energy. 2008. DOI : 10.1016/j.energy.2007.10.012.Predictive Optimal Management Method for the control of polygeneration systems
Computer Aided Chemical Engineering. 2008. DOI : 10.1016/S1570-7946(08)80059-4.Multi-objective optimization of RO desalination plants
Desalination. 2008. DOI : 10.1016/j.desal.2007.02.064.Energy integration study of a multi-effect evaporator
2008. PRES08: 11th Conference Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Praha (Czech Republic), August 24-28, 2008.Gas equilibrium and exergy analysis of the FICFB and Viking gasification concepts
2008. 11th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Prague, August 24-28, 2008.Thermo-economic Optimization of a Solid Oxide Fuel Cell, Gas Turbine Hybrid System
Journal of Fuel Cell Science and Technology. 2007. DOI : 10.1115/1.2714564.Optimal process design for thermochemical biofuel production plants
Annual meeting of the Alliance for Global Sustainability (AGS), Barcelona, 18.-21.03.2007.Conceptual Design of a Combined Cycle Power Plant Using Existing Gas Turbines
2007Energy conversion processes for the use of geothermal heat - Final report
2007Reducing carbon dioxide emissions by gas turbine processes | [CO2-Reduktion bei gasturbinen-prozessen]
Chemie-Ingenieur-Technik. 2007. DOI : 10.1002/cite.200750057.Evaluation of Natural Gas Combined Cycle Plants in China through Environomic Modeling and Multi-objective Optimization
2007. PRES 2007, Ischia Italie, 24 au 27 juin 2007.Methodology for the optimal thermo-economic, multi-objective design of thermochemical fuel production from biomass
Computer Aided Chemical Engineering. 2007. DOI : 10.1016/S1570-7946(07)80239-2.Design and optimization of district energy systems
2007. PRES06, Prag, Czech Republic, August, 27-31 2006. p. 1127 - 1132.Analyse énergétique d’évaporateurs par la méthode de la double représentation
2007Web-based tools for energy management in large companies applied to food industry
Lausanne, EPFL, 2007. DOI : 10.5075/epfl-thesis-3785.Intégration optimale des coulages chaleur-force dans les systèmes urbains
Bulletin VSE/AES. 2007. DOI : 10.5169/seals-857447.Stratégie thermique pour le canton de Genève: réseau de distribution de chaleur et climatisation
2007Methodology for the optimal thermo-economic, multi-objective design of thermochemical fuel production from biomass
2007. ESCAPE17, 17th European symposium on computer aided process engineering, Bucharest, Romania, 27.-30.5.2007. p. 1289 - 1294. DOI : 10.1016/S1570-7946(07)80239-2.Étude thermo-économique de l'intégration des pompes à chaleur industrielles
2007Selected pathways for a more efficient conversion of biomass in cogeneration or fuel production
2007. International Conference Engineering for Sustainable Energy in developing countries, Rio Cidade Nova Convention Center, Rio de Janeiro, Brazil, August, 15 - 18, 2007.Innovative design and multi-objective optimization of hybrid reverse osmosis and multi-stage flash desalination plants
CHISA, Prague, August 2007.An energy management method for the food industry
Applied Thermal Engineering. 2007. DOI : 10.1016/j.applthermaleng.2007.06.005.A Model for Simulating the Thermal and Electrical Production of Small-Scale Solid-Oxide Fuel Cell Cogeneration Systems within Building Simulation Programs
HVAC&R Research. 2006. DOI : 10.1080/10789669.2006.10391199.Thermo economic analysis for the optimal conceptual design of biomass gasification energy conversion systems
2006. PRES 2006, 9th Conference on Process Integration, Modelling and Optimisation, Prague, 27.8.-31.8..Innovative design and multi-objective optimization of hybrid reverse osmosis and multi-stage flash desalination plants
PRES 2006, Prag, 25-27 Août 2006.Methodology for process energy analysis: application to a sulfite wood pulping
2006. PRES06: 9th Conference Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Praha (Czech Republic), August 27-31, 2006.The challenge of introducing an exergy indicator in a local low on energy
2006. ECOS 2006, 19th International Conference, Capsis Hotel, Aghia Pelagia, Crete, Greece, 12-14 July 2006. p. 213 - 219.Quand l'énergie est intégrée à la planification des quartiers du futur
L'AGEFI. 2006.Concept énergétique de quartier; Application au cas des Rues Basses à Genève
2006Enhancing the quality of energy services in urban areas by means of renewable energy technologies and information and communication technologies in energy networks: issues, challenges and opportunities
2006. World Renewable Energy CongressIX, Florence, Florence, Italy, 19-25 August 2006.Can steam play a role in low to medium power from low temperature heat?
2006. ASME 2006, Milano, Italy, 14 - 17 May 2006. p. 273 - 283.Thermo-economic optimisation of the integration of electrolysis in a wood to methane process
2006. ECOS 2006, 19th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Heraklion, Crete, Greece, 12.-14.07.2006.Environomic modeling and multi-objective optimisation of integrated energy systems for power and cogeneration
Lausanne, EPFL, 2006. DOI : 10.5075/epfl-thesis-3657.Une nouvelle méthode d'analyse thermique et son application aux procédés papetiers
ATIP (Association technique de l'industrie papetière), Annecy, 27 au 29 avril 2005.Network synthesis for district heating with multiple heat plants
2005. CIEM 2005, Bucharest, Romania, 20-21 october 2005. p. 347 - 354.Thermo-economic Optimization of a Solid Oxide Fuel Cell, Gas Turbine Hybrid System
2005. European Fuel Cell Conference, Roma, Italy, 14-16 dec. 2005.A Methodology for Thermo-Economic Modeling and Optimization of SOFC Systems
Chemical Engineering Transactions. 2005.Quel potentiel pour les Biocarburants?
2005A proposed System-Level Model for Simulating the Thermal and Electrical Production of Solid-Oxide Fuel Cell Residential Cogeneration Devices within Whole-Building Simulation
2005.Multi-objective optimisation of complex energy conversion systems
National Science Council of Taiwan, Taiwan, Rep. of China, 29.08.2005-04.09.2005.Projet PACOGEN, Evaluation économique et environnementale de systèmes énergétiques à usage résidentiel
2005An energy management method for the food industry
2005. PRES05, Giardini di Naxos, May 15-18, 2005. p. 471 - 476.Decentralized production in urban systems, the vision of the Institute of Energy Sciences of EPFL
2005. Swiss Environmental Solutions For Emerging Countries (SESEC IV - 2005), Lausanne, 5-7 October, 2005.Thermo-Economic Modelling and Optimisation of Fuel Cell Systems
Fuel Cells. 2005. DOI : 10.1002/fuce.200400055.A dual representation for targeting process retrofit, application to a pulp and paper process
Applied Thermal Engineering. 2005. DOI : 10.1016/j.applthermaleng.2004.07.024.Multi-objective optimisation of fuel cell systems
National Science Council of Taiwan, Taiwan, Rep. of China, 29.08.2005-4.09.2005.Application of Multi-Objective Optimisation to Process Measurement System
2005. European Symposium on computer aided process engineering n15. p. 1153 - 1159. DOI : 10.1016/S1570-7946(05)80034-3.Combined Exergy and Pinch Analysis for Optimal Energy Conversion Technologies Integration
2005. p. 177 - 184.Process design of Synthetic Natural Gas (SNG) production using wood gasification
Journal of Cleaner Production. 2005. DOI : 10.1016/j.jclepro.2005.04.009.Méthodologie de conception optimale d'un réseau hydrogène d'un site industriel
2005Multi-objective Optimization of Energy Systems
2005Optimisation multi-objectifs pour la conception des systèmes énergétiques
séminaire EPFL, Lausanne, 08.03.2005.Advanced Power Plant Design Methodology using Process Integration and Multi-Objective Thermo-Economic Optimisation
2005. p. 777 - 784.Optimization of an SOFC-based decentralized polygeneration system for providing energy services in an office-building in Tokyo
2004. p. 2985 - 3004.Design methodology for micro cogen systems
Targeting Method for the Retrofit Design of the Cogeneration System of Integrated Newsprint Mill
A heat piloted 5 kW fuel cell
2004.Data reconciliation and sampling protocol design, case of a paper deinking process
Paperi Ja Puu-Paper and Timber. 2004.Mass Integration of a Deinking Mill
2004. p. 97 - 103.Green heating system: characteristics and illustration with multi-criteria optimization of an integrated energy system
Energy. 2004. DOI : 10.1016/j.energy.2003.09.003.A Methodology for the Optimal Insertion of Organic Rankine Cycles in Industrial Processes
2004.Process flow model of solid oxide fuel cell system supplied with sewage biogas
Journal of Power Sources. 2004. DOI : 10.1016/j.jpowsour.2004.01.013.Multi-scale modeling methodology for computer aided design of a Solid Oxide fuel cell stack
2004. ESCAPE, Lisbonne, 2004. p. 1081 - 1086. DOI : 10.1016/S1570-7946(04)80246-3.Optimization of an SOFC-based decentralized polygeneration system for providing energy services in an office-building in Tokyo
Fermeture des circuits dans un procédé de désencrage: analyse et simulation
Pulp & Paper, Canada. 2004.Multi-Criteria Optimization of an Advanced Combined Cycle Power Plant including CO2 Separation Options
2004. p. 263 - 275.Energy Integration and System Modelling of Fuel Cell Systems
2004Fuel Cell Modeling and Simulations
CHIMIA. 2004. DOI : 10.2533/000942904777677029.Modélisation système SOFC dans l’environnement gPROMS
2003Optimization of a fuel cell system using process integration techniques
Journal of Power Sources. 2003. DOI : 10.1016/S0378-7753(03)00107-1.Multi-Criteria Optimization of Pulverized Fuel Coal-Fired Power Generation System Load Dispatching
2003. International Joint Power Generation Conference collocated with TurboExpo 2003, Atlanta, Georgia USA, June 16–19, 2003. p. 313 - 320. DOI : 10.1115/IJPGC2003-40155.Data Reconciliation and Sampling Protocol Design: The Case of a Paper Deinking Proces
2003Combined optimisation and process integration techniques for the synthesis of fuel cells systems
2003. 13th European Symposium on Computer Aided Process Engineering. p. 143 - 148. DOI : 10.1016/S1570-7946(03)80105-0.Application of Data Reconciliation to the Simulation of System Closure Options in a Paper Deinking Process
2003. p. 1001 - 1006. DOI : 10.1016/S1570-7946(03)80248-1.Pompe à chaleur air-eau à Haute Température. Phase 2: cycle à injection optimisé, essai journaliers et compreseur booster. Analyse thermo-économique.
2002Optimisation of a fuel cell system using process integration techniques
A Tool for Optimal Synthesis of Industrial Refrigeration Systems : Application to an Olefins Plant
2002.Promotion de l'utilisation rationnelle de l'énergie dans l'industrie par PINCHLENI
2002Intégration énergétique de procédés discontinus à l'aide d'algorithmes génériques.
2001process integration: Selection of the optimal utility system
Computers & Chemical Engineering. 1998. DOI : 10.1016/S0098-1354(98)00049-0.Energy integration of industrial sites: tools, methodology and applications
Applied Thermal Engineering. 1998. DOI : 10.1016/S1359-4311(98)00018-0.Energy savings in methanol synthesis: Use of heat Integration Techniques and Simulation Tools
Computers & Chemical Engineering. 1997. DOI : 10.1016/S0098-1354(97)87553-9.Effect modeling and optimisation, a new methodology for combined energy and environment synthesis of industrial processes
Applied Thermal Engineering. 1997. DOI : 10.1016/S1359-4311(96)00079-8.Identify the optimal pressure levels in steam networks using integrated Combined Heat and Power method
Chemical Engineering Science. 1997. DOI : 10.1016/S0009-2509(97)00102-4.Targeting the Minimum Cost of Energy Requirements: a new graphical technique for evaluating the integration of utility systems
Computers & Chemical Engineering. 1996. DOI : 10.1016/0098-1354(96)00048-8.a methodology for energy integration and optimal heat exchanger network synthesis
Computers & Chemical Engineering. 1989. DOI : 10.1016/0098-1354(89)85044-6.Enseignement et PhD
Doctorant·es actuel·les
Julie Rose Dutoit, Pullah Bhatnagar, Naveen Bhati, Sai Sudharshan Ravi, Dareen Dardor, Dorsan Lepour, Soline Corre, Marie Jones, Sanjay Venkatachalam, Vibhu Baibhav, Mael Camil Mouhoub, Yi Zhao, Louis Merceron, Cédric Terrier, Arthur Waeber, Arthur Chuat, Alberto Follo
A dirigé les thèses EPFL de
Damien Muller, François Vince, Zoé Périn-Levasseur, Raffaele Bolliger, Martin Gassner, Luc Girardin, Matthias Dubuis, Helen Carla Becker, Léda Gerber, Laurence Tock, Juan David Villegas Gomez, Jairo Alexander Lozano Moreno, Samira Fazlollahi, Levent Sinan Teske, Jakob Rager, Nasibeh Pouransari, Emanuela Peduzzi, Matthias Bendig, Zlatina Kirilova Dimitrova, Samuel Henchoz, Stéphane Laurent Bungener, Alberto Mian, Ramanunni Parakkal Menon, Alexandre Suzanne Jean-Marie Bertrand, Stefano Moret, Sébastien Cajot, Elfie Marie Méchaussie, Maziar Kermani, Victor Codina Gironès, Nils Christian Schüler, Anna Sophia Wallerand, Paul Michael Stadler, Lorenzo Nespoli, Ayse Dilan Celebi, Raluca-Ancuta Suciu, Hür Ebuzer Bütün, Frédéric Louis-Pierre Raphaël Marie Amblard, Shanshan Hsieh, Francesca Belfiore, Xun Liao, Alessio Santecchia, Luise Middelhauve, Xiang Li, Rafael Amorim Leandro De Castro Amoedo, Julia Granacher, Emanuele Piccoli, Jonas Schnidrig, Xinyi Wei
A co-dirigé les thèses EPFL de
Yves Jon Césare Loerincik, Hongtao Li, Céline Weber, Emanuele Facchinetti, Amirreza Heidari
Cours
Advanced energetics
ME-451
Méthodes pour l'utilisation rationnelle et la conversion de l'énergie dans les processus industriels: comment analyser l'utilisation de l'énergie, calculer la récupération de chaleur par analyse de pincement, définir le réseau d'échangeurs thermiques et réaliser une analyse exergétique.
Biomass conversion
ENG-618
The learning outcomes are to get to know the biomass ressources and its characteristics; study of biomass conversion pathways and study of process flow-sheets; establish the flow diagram of an industrial process with biomass as feedstock and calculate the corresponding mass and energy balances; etc
Energy conversion and renewable energy
ME-409
Le cours donne un aperçu (i) du système énergétique actuel, (ii) des principes techniques des systèmes de conversion d'énergie (fossiles, nucléaires et renouvelables), et (iii) de leurs aspects économiques et environnementaux.
Modelling and optimization of energy systems
ME-454
Ce cours présente les techniques de modélisation et l'optimisation thermo-économique des procédés industriels et des systèmes énergétiques. Il couvre également l'étude de cas, les méthodes de résolution pour la simulation et les problèmes d'optimisation à un ou plusieurs objectifs.
Modelling, optimisation, design and analysis of integrated energy systems
ME-602
The student will learn advanced concepts in the field of process integration, process modeling and optimization for the design of integrated energy systems: Life cycle energy analysis.
Process development
ChE-459
A travers un projet, ce cours introduira les étapes clé dans le développement d'un procédé chimique, du laboratoire à l'échelle industrielle. L'accent sera mis sur l'étude de procédés qui contribuent à la decarbonisation de l'industrie.