Domaines de compétences
MissionTeaching and research in the field of computer aided process and energy conversion systems analysis and synthesis. Application of computer based methods for the analysis, the design and the optimisation of industrial processes and efficient energy conversion systems.
Major research topicsProcess integration techniques, exergy analysis, process modelling and thermo-economic optimisation. Process synthesis methodologies, application and development of computer aided process engineering methods : data reconciliation, simulation, process integration, mixed integer linear and non linear programming, multi-objective optimisation.
Research goals : Integrated processes and energy conversion systems that integrate renewable energy resources and that supply multiple energy services are a key issue for our energy future. The development of advanced computer aided methodologies combining thermodynamics and optimisation techniques will help engineers in the development of more efficient and more sustainable processes and energy conversion systems that will supply the energy for the future generations.
Major teaching activitiesAdvanced energetics (process integration), exergy analysis, process optimisation and modelling, energy audits and energy conversion systems for masters in mechanical and electrical engineering, engineers in physics, energy and electrical engineering postgraduate programs and doctoral school.
Teaching goals : computer aided project based teaching improves teaching efficiency and allow to bridge the gap between teaching and research activities. By this concept, the student acquire a better know-how that is afterwards valorized in the research activities as well as in their professional life.
BiographieLook at the researcher id
Process and Energy Systems Engineering
Ecole Polytechnique F�d�rale de Lausanne
Maitre d'enseignement de Recherche
Industrial Energy systems Laboratory
Ecole Polytechnique f�d�rale de Lausanne
Industrial Energy Systems Laboratory
Ecole Polytechnique F�d�rale de Lausanne
Laboratoire d'analyse et de synth�se des syst�mes chimiques
Universit� de Li�ge
1er ing�nieur de recherche
Laboratoire d'analyse et de synth�se des syst�mes chimiques
Universit� de Li�ge
Ing�nieur de recherche
Laboratoire d'analyse et de synth�se des syst�mes chimiques
Universit� de Li�ge
Chemical Engineer (ing�nieur Civil Chimiste)
Universit� de Li�ge (Belgium)
Ph D. in Applied Sciences
Energy analysis and synthesis of industrial sites
University of Li�ge (Belgium)
Reinforcement Learning for proactive operation of residential energy systems by learning stochastic occupant behavior and fluctuating solar energy: Balancing comfort, hygiene and energy useApplied Energy. 2022-07-15. DOI : 10.1016/j.apenergy.2022.119206.
Exergy and exergoeconomic assessment of sustainable light olefins production from an integrated methanol synthesis and methanol-to-olefins systemJournal Of Cleaner Production. 2022-05-01. DOI : 10.1016/j.jclepro.2022.131209.
Industrial Flexibility as Demand Side Response for Electrical Grid StabilityFrontiers In Energy Research. 2022-04-26. DOI : 10.3389/fenrg.2022.831462.
Pyrolysis and gasification integrated process of empty fruit bunch for multi-biofuels production: Technical and economic analysesEnergy Conversion And Management. 2022-04-15. DOI : 10.1016/j.enconman.2022.115465.
Prospective study on the cost evolution for key energy technologies2022-02-22
Overcoming decision paralysis—A digital twin for decision making in energy system designApplied Energy. 2022-01-15. DOI : 10.1016/j.apenergy.2021.117954.
Comparison and optimization of different fuel processing options for biogas-fed solid-oxide fuel cell plantsInternational Journal Of Hydrogen Energy. 2022-01-01. DOI : 10.1016/j.ijhydene.2021.10.025.
Appendix: Regionalisation in high share renewable energy system modelling2021-11-22. 2022 IEEE Power & Energy Society General Meeting (GM), Denver, Colorado, USA, July 17-21, 2022.
Increasing Superstructure Optimization Capacity Through Self-Learning Surrogate ModelsFrontiers in Chemical Engineering. 2021-11-04. DOI : 10.3389/fceng.2021.778876.
Potential of Photovoltaic Panels on Building Envelopes for Decentralized District Energy SystemsFrontiers In Energy Research. 2021-10-15. DOI : 10.3389/fenrg.2021.689781.
The Role of Biowaste: A Multi-Objective Optimization Platform for Combined Heat, Power and FuelFrontiers in Energy Research. 2021-09-01. DOI : 10.3389/fenrg.2021.718310.
Demographic and Geographic Region Definition in Energy System Modelling. A case study of Canada’s path to net zero greenhouse gas emissions by 2050 and the role of hydrogen2021-08-27
An analysis of the impacts of green mobility strategies and technologies on different European energy system2021-08-01. The 34th International conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2021), Taormina, Italy, June 27 - July 2, 2021.
A modelling framework for assessing the impact of green mobility technologies on energy systems2021-08-01. The 34th International conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2021), Taormina, Italy, June 27 - July 2, 2021.
Assessment of building stock impact on global energy system optimization2021-07-26
A study on synergies of combined pulp and fuel production2021-07-02. The 34th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2021), Taormina, Italy, June 27 - July 2, 2021.
Towards a sustainable supply chain on plastic waste management : a multi-criteria optimization approach2021-07-01. 34th International conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2021), Taormina, Italy, June 28-July 2, 2021.
Network design optimization of waste management systems: the case of plastics2021-07-01. 31st European Symposium on Computer Aided Process Engineering (ESCAPE-31), Instanbul, Turkey, June 6-9, 2021. p. 185-190. DOI : 10.1016/B978-0-323-88506-5.50030-9.
Data reduction for mixed integer linear programming in complex energy systems2021-06-27. The 34th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2021), Taormina, Italy, June 27-July 2, 2021.
How Smart is the Grid?Frontiers in Energy Research. 2021-06-24. DOI : 10.3389/fenrg.2021.637447.
On the Application of Small-Scale Turbines in Industrial Steam NetworksEnergies. 2021-05-28. DOI : 10.3390/en14113149.
Reversible solid-oxide cell stack based power-to-x-to-power systems: Economic potential evaluated via plant capital-cost targetApplied Energy. 2021-05-15. DOI : 10.1016/j.apenergy.2021.116700.
Triple-Mode Grid-Balancing Plants via Biomass Gasification and Reversible Solid-Oxide Cell Stack: Economic Feasibility Evaluation via Plant Capital-Cost TargetFrontiers In Energy Research. 2021-04-14. DOI : 10.3389/fenrg.2021.659154.
Grid-Aware Layout of Photovoltaic Panels in Sustainable Building Energy SystemsFrontiers in Energy Research. 2021-02-18. DOI : 10.3389/fenrg.2020.573290.
Techno-economic comparison of 100% renewable urea production processesApplied Energy. 2021-02-15. DOI : 10.1016/j.apenergy.2020.116401.
SCCER-FURIES - Best investment strategies when prosumer capacities are increased in the grid (RE Demo) - D1.4.1b2021-02-01
EnergyScope Europe - Data research and model adaptation2021-01-15
EPFL's District Heating Heat Pump - Performance Analysis for DIfferent Working Fluids2021-01-15
Application of artificial intelligence on uncertainty analysis for long-term energy system planning2021. 34th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2021), Taormina, Italy, June 27-July 2, 2021.
Dynamic optimization modelling for a national-scale energy sysem in transition2021. 31st European Symposium on Computer Aided Process Engineering. p. 1421-1426. DOI : 10.1016/B978-0-323-88506-5.50219-9.
Self-learning surrogate models in superstructure optimization31st European Symposium on Computer Aided Process Engineering; Elsevier, 2021-01-01. p. 2140.
Appendix - A modelling framework for assessing the impact of green mobility technologies on energy systems2021. ECOS 2021 - The 34th International conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Taormina, Italy, June 27 - July 2, 2021.
Fuel cell-battery hybrid systems for mobility and off-grid applications: A reviewRenewable & Sustainable Energy Reviews. 2021-01-01. DOI : 10.1016/j.rser.2020.110119.
Investment Planning Methodology for Complex Urban Energy Systems Applied to a Hospital SiteFrontiers in Energy Research. 2020-12-09. DOI : 10.3389/fenrg.2020.537973.
Exergy assessment and techno-economic optimization of bioethanol production routesFuel. 2020-11-01. DOI : 10.1016/j.fuel.2020.118327.
Designing a neighbourhood energy infrastructure: Applying a novel framework to Lisbon2020-10-03
System Design and Performance Evaluation of Wastewater Treatment Plants Coupled With Hydrothermal Liquefaction and GasificationFrontiers in Energy Research. 2020-09-23. DOI : 10.3389/fenrg.2020.568465.
Analysis of the sorption-enhanced chemical looping biomass gasification process: Performance assessment and optimization through design of experiment approachEnergy. 2020-09-15. DOI : 10.1016/j.energy.2020.118190.
Optimization based approach to assist the transition of large energy users to low temperature networks2020-09-01. 33rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2020), Osaka, Japan, 29 June - 3 July, 2020.
Assessment of green mobility scenarios on European energy systems2020-08-21
Data for Urban Scale Building Energy Modelling: Assessing Impacts and Overcoming Availability ChallengesEnergies. 2020-08-17. DOI : 10.3390/en13164244.
Reversible solid-oxide cell stack based power-to-x-to-power systems: Comparison of thermodynamic performanceApplied Energy. 2020-07-02. DOI : 10.1016/j.apenergy.2020.115330.
Multi-objective optimization in waste plastics - recycling vs thermo-valorization2020-06-29. 33rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems - ECOS 2020, Osaka, Japan, June 29 - July 3, 2020. p. Osaka, Japan, ECOS 2020 Local Organizing Committee.
Predicting thermodynamic performance of biomass gasification plants by applying surrogate models2020-06-29. 33rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Osaka, Japan, June 29 - July 3, 2020.
Application of data reconciliation methods for performance monitoring of power-to-gas plants2020-06-29. 33rd International Conference onEfficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems - ECOS 2020. p. 1546-1564.
Industrial flexibility as demand-side response for electrical grid stability2020-06-29. 33rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems - ECOS 2020, Osaka, Japan, June 29 - July 3, 2020. p. 759-769.
Key Performance Indicators for Decision Making in Building Energy Systems2020-06-29. 33rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems - ECOS 2020, Osaka, Japan, June 29- July 3, 2020. p. 388-400.
A Mixed-Integer Linear Programming Formulation for Optimizing Multi-Scale Material and Energy IntegrationFrontiers in Energy Research. 2020-04-15. DOI : 10.3389/fenrg.2020.00049.
Enhancing the operational flexibility of thermal power plants by coupling high-temperature power-to-gasApplied Energy. 2020-04-01. DOI : 10.1016/j.apenergy.2020.114608.
Life cycle assessment integration into energy system models: An application for Power-to-Methane in the EUApplied Energy. 2020-02-01. DOI : 10.1016/j.apenergy.2019.114160.
Overcapacity in European power systems: Analysis and robust optimization approachApplied Energy. 2020-02-01. DOI : 10.1016/j.apenergy.2019.113970.
Combined exergy analysis, energy integration and optimization of syngas and ammonia production plants: A cogeneration and syngas purification perspectiveJournal Of Cleaner Production. 2020-01-20. DOI : 10.1016/j.jclepro.2019.118647.
Decision support for strategic energy planning: A robust optimization frameworkEuropean Journal Of Operational Research. 2020-01-16. DOI : 10.1016/j.ejor.2019.06.015.
Techno-economic optimization of biomass-to-methanol with solid-oxide electrolyzerApplied Energy. 2020-01-15. DOI : 10.1016/j.apenergy.2019.114071.
Optimal multi-energy system design for the EnergyPolis Campus2020-01-10
Belgian Energy Transition: What Are the Options?Energies. 2020-01-04. DOI : 10.3390/en13010261.
Decarbonization in Complex Energy Systems: A Study on the Feasibility of Carbon Neutrality for Switzerland in 2050Frontiers in Energy Research. 2020. DOI : 10.3389/fenrg.2020.549615.
Optimal integration of sustainable multi-energy systems in districts2020. 33rd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2020), Osaka, Japan, 29 June - 3 July, 2020.
System for co2 capture from internal combustion engineUS2022010707 ; EP3873645 ; CN113164857 ; WO2020089186 ; EP3646935 . 2020.
3D design and optimization of heat exchanger network for solid oxide fuel cell-gas turbine in hybrid electric vehiclesApplied Thermal Engineering. 2019-12-25. DOI : 10.1016/j.applthermaleng.2019.114310.
Image énergétique de la commune de Sion - une inventarisation des ressources et demande2019-12-19
Carbon Dioxide Capture From Internal Combustion Engine Exhaust Using Temperature Swing AdsorptionFrontiers In Energy Research. 2019-12-16. DOI : 10.3389/fenrg.2019.00143.
Balancing wind-power fluctuation via onsite storage under uncertainty: Power-to-hydrogen-to-power versus lithium batteryRenewable & Sustainable Energy Reviews. 2019-12-01. DOI : 10.1016/j.rser.2019.109465.
EnergyScope TD: A novel open-source model for regional energy systemsApplied Energy. 2019-12-01. DOI : 10.1016/j.apenergy.2019.113729.
An Optimisation Approach for Long-Term Industrial Investment PlanningEnergies. 2019-10-25. DOI : 10.3390/en12214076.
Regionalization in energy system planning: Application in Gros-de-Vaud, canton de Vaud2019-10-05
Techno-Economic Optimization of CO2-to-Methanol with Solid-Oxide ElectrolyzerEnergies. 2019-09-30. DOI : 10.3390/en12193742.
Power-to-methane via co-electrolysis of H2O and CO2: The effects of pressurized operation and internal methanationApplied Energy. 2019-09-15. DOI : 10.1016/j.apenergy.2019.05.098.
Incorporating Location Aspects in Process Integration MethodologyEnergies. 2019-09-01. DOI : 10.3390/en12173338.
Next generation cogeneration system for industry - Combined heat and fuel plant using biomass resourcesChemical Engineering Science. 2019-08-31. DOI : 10.1016/j.ces.2019.04.018.
Comparative exergy and economic assessment of fossil and biomass-based routes for ammonia productionEnergy Conversion And Management. 2019-08-15. DOI : 10.1016/j.enconman.2019.04.072.
Design of a Pilot SOFC System for the Combined Production of Hydrogen and Electricity under Refueling Station RequirementsFuel Cells. 2019-08-01. DOI : 10.1002/fuce.201800200.
Systematic Integration of Energy-Optimal Buildings With District NetworksEnergies. 2019-08-01. DOI : 10.3390/en12152945.
Optimal design of biomass supply chains with integrated process design2019-06-28. 29th European Symposium on Computer Aided Process Engineering, Eindhoven, The Netherlands, 16-6, 2019. p. 1729-1734. DOI : 10.1016/B978-0-128-18634-3.50289-7.
Reversible solid oxide systems for energy and chemical applications – Review & perspectivesJournal of Energy Storage. 2019-06-24. DOI : 10.1016/j.est.2019.100782.
Bottom-up method for potential estimation of energy saving measures2019-06-16. 29th European Symposium on Computer Aided Process Engineering, Eindhoven, NL, June 16-19, 2019. p. 1597-1602. DOI : 10.1016/B978-0-12-818634-3.50267-8.
Power-to-fuels via solid-oxide electrolyzer: Operating window and techno-economicsRenewable and Sustainable Energy Reviews. 2019-05-02. DOI : 10.1016/j.rser.2019.04.071.
Trade-off designs and comparative exergy evaluation of solid-oxide electrolyzer based power-to-methane plantsInternational Journal Of Hydrogen Energy. 2019-04-12. DOI : 10.1016/j.ijhydene.2018.11.151.
System design of a geothermal sourced CO2 network in a residential district2019-04-10
A Holistic Methodology for Optimizing Industrial Resource EfficiencyEnergies. 2019-04-05. DOI : 10.3390/en12071315.
Long- and short-lists of key performance indicators in industry and for industrial symbiosis2019-03-22
Defossilize Switzerland Yes we canpresented at CLIMATE SEMINAR SERIES FOR STEMM* SCIENTISTS February 18, 2019 at 12h15-13h15, Room H4-02-A, Geneva, Geneva, 18.02.2019.
Biomass logistics and environmental impact modelling for sugar-ethanol productionJournal Of Cleaner Production. 2019-02-10. DOI : 10.1016/j.jclepro.2018.10.310.
A Cogeneration System Based on Solid Oxide and Proton Exchange Membrane Fuel Cells With Hybrid Storage for Off-Grid ApplicationsFrontiers In Energy Research. 2019-01-18. DOI : 10.3389/fenrg.2018.00139.
Regional waste heat valorisation: a mixed integer linear programming method for energy service companiesEnergy. 2019-01-15. DOI : 10.1016/j.energy.2018.10.152.
Interactive Optimization With Parallel Coordinates: Exploring Multidimensional Spaces for Decision SupportFrontiers in ICT. 2019-01-14. DOI : 10.3389/fict.2018.00032.
The role of storage in the Swiss energy transition2019. 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2019), Wroclaw, Poland, June 23-28, 2019. p. 761-774.
Are renewables really that expensive? The impact of uncertainty on the cost of the energy transition2019. The 29th European Symposium on Computer Aided Process Engineering, Eindhoven, The Netherlands, June 16-19, 2019. p. 1753-1758. DOI : 10.1016/B978-0-128-18634-3.50293-9.
Wastewater management towards a sustainable futureDairy production: a study case2019. THE 32ND INTERNATIONAL CONFERENCE ON EFFICIENCY, COST, OPTIMIZATION, SIMULATION AND ENVIRONMENTAL IMPACT OF ENERGY SYSTEMS, Wrocław, Poland, June 23-28, 2019, Wroclaw, Poland, June 2019. p. 565-594.
Solid-oxide electrolyzer coupled biomass-to-methanol systemsEnergy Procedia. 2019. DOI : 10.1016/j.egypro.2019.01.755.
Potential of hydrothermal black liquor gasification integrated in pulp production plant2019. THE 32ND INTERNATIONAL CONFERENCE ON EFFICIENCY, COST, OPTIMIZATION, SIMULATION AND ENVIRONMENTAL IMPACT OF ENERGY SYSTEMS, Wrocław, Poland, June 23-28, 2019. p. 2299-2309.
Geographically Parameterized Residential Sector Energy and Service ProfileChemical Engineering Transactions. 2019. DOI : 10.3303/CET1870119.
Influence of photovoltaic panel orientation on modern energy systems in residential buildings2019. THE 32ND INTERNATIONAL CONFERENCE ON EFFICIENCY, COST, OPTIMIZATION, SIMULATION AND ENVIRONMENTAL IMPACT OF ENERGY SYSTEMS, June 23-28, 2019.
Exergetic, environmental and economic assessment of sugarcane first-generation biorefineriesJournal Of Power Technologies. 2019-01-01.
Optimal Design of Heat-Integrated Water Allocation NetworksEnergies. 2019. DOI : 10.3390/en12112174.
Comparison of extraction techniques for product diversification in a supercritical water gasification-based sugarcane-wet microalgae biorefinery: Thermoeconomic and environmental analysisJournal of Cleaner Production. 2018-11-10. DOI : 10.1016/j.jclepro.2018.08.137.
Process integration as a tool for the improvement of cruise ships energy efficiency2018-09-06. Shipping in Changing Climates, London, United Kingdom, September 4-5, 2017.
Simultaneous optimisation and heat integration of evaporation systems including mechanical vapour recompression and background processEnergy. 2018-09-01. DOI : 10.1016/j.energy.2018.06.046.
Exergy Recovery During Liquefied Natural Gas Regasification Using Methane as Working Fluid2018-08-30. Conference on Process Integration, Modelling and Optimization for Energy Saving and Pollution Reduction, Prague, Czech Republic, August 25-29, 2018. DOI : 10.3303/CET1870090.
EnergyScope Valais - Case study of Regionalisation2018-08-13
A heat integration method with location-dependent heat distribution losses2018-08-01. International Symposium on Process Systems Engineering – PSE 2018, San Diego, California, USA, July 1-5, 2018. p. 1195-1200. DOI : 10.1016/B978-0-444-64241-7.50194-4.
Solar thermal and geothermal integration with low temperature CO 2 DENs2018-07-01. 13th International Symposium on Process Systems Engineering (PSE 2018), San Diego, California, USA, July 1-5, 2018. p. 1849-1854. DOI : 10.1016/B978-0-444-64241-7.50303-7.
Method for the systematic integration of multi-energy networks and low carbon resources in citiesThe American Society of Mechanical Engineers Power and Energy Conference, Lake Buena Vista, Florida, USA, June 24-28, 2018.
Integration of solid oxide fuel cells in cruise ship energy systems2018-06-22. ECOS 2018 - 31st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Guimaraes, Portugal, June 17-22, 2018.
Energy integration of CO2 networks and Power to Gas for emerging energy autonomous cities in EuropeEnergy. 2018-05-07. DOI : 10.1016/j.energy.2018.05.083.
Contribution of Model Predictive Control in the Integration of Renewable Energy Sources within the Built EnvironmentFrontiers in Energy Research. 2018-05-03. DOI : 10.3389/fenrg.2018.00022.
District heating and cooling energy network using CO2 as a heat and mass transfer fluidHeat Pumping Technologies MAGAZINE. 2018-04-20.
A heat integration method with multiple heat exchange interfacesEnergy. 2018-03-28. DOI : 10.1016/j.energy.2018.03.114.
Online parallel coordinates tool for optimal utility design in the dairy industry2018-03-16
Analyse des performances de confort et énergétiques (thermique et électrique) de différents systèmes de ventilation simple flux dans l’habitat collectif2018-03-06
A data-driven model for the air-cooling condenser of large-scale coal-fired power plants based on data reconciliation and support vector regressionApplied Thermal Engineering. 2018-01-25. DOI : 10.1016/j.applthermaleng.2017.10.103.
On the Assessment of the CO2 Mitigation Potential of Woody BiomassFrontiers in Energy Research | Bioenergy and Biofuels. 2018-01-24. DOI : 10.3389/fenrg.2017.00037.
Pilot studies on optimizing land use, building density and solar electricity generation in dense urban settings2018-01-01. 24th International Seminar on Urban Form, Valencia, SPAIN, Sep 27-29, 2017. p. 641-648. DOI : 10.4995/ISUF2017.2017.5636.
A Review of Evaluation, Optimization and Synthesis of Energy Systems: Methodology and Application to Thermal Power PlantsEnergies. 2018. DOI : 10.3390/en12010073.
Thermoeconomic design of biomass biochemical conversion technologies for advanced fuel, heat and power productionComputer Aided Chemical Engineering. 2018. DOI : 10.1016/B978-0-444-64241-7.50295-0.
"Qui sème le vent récolte le tempo" - Saint-Malo (F). Le Môle des Noires: protéger, profiter et produire2018
Thermal profile construction for energy-intensive industrial sectors2018. 31st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Guimaraes, Portugal, June 17-22, 2018.
Optimal design of biogas supply chainsESCAPE 28; Elsevier B.V., 2018-01-01. p. 669-674.
Multi-period multi-time optimisation of CO2 based district energy systemsESCAPE 28; Elsevier B.V., 2018-01-01. p. 1057-1062.
Review of design works for the conversion of sugarcane to first and second-generation ethanol and electricityRenewable and Sustainable Energy Reviews. 2018. DOI : 10.1016/j.rser.2018.02.020.
A Heat Load Distribution Method for Retrofitting Heat Exchanger Networks, 28th European Symposium on Computer Aided Process EngineeringComputer Aided Chemical Engineering. 2018. DOI : 10.1016/B978-0-444-64235-6.50244-8.
Synthesis of Heat-Integrated Water Allocation Networks: A Meta-Analysis of Solution Strategies and Network FeaturesEnergies. 2018. DOI : 10.3390/en11051158.
Linking interactive optimization for urban planning with a semantic 3D city model2018. ISPRS TC IV Mid-term Symposium “3D Spatial Information Science – The Engine of Change” (Volume IV-4), Delft, The Netherlands, October 1 - 5, 2018. p. 179-186. DOI : 10.5194/isprs-annals-IV-4-179-2018.
Robust multi-objective optimization of solid oxide fuel cell–gas turbine hybrid cycle and uncertainty analysisJournal of Electrochemical Energy Conversion & Storage. 2018. DOI : 10.1115/1.4039944.
Optimal heat pump integration in industrial processesApplied Energy. 2018. DOI : 10.1016/j.apenergy.2018.02.114.
Optimal design of solar-assisted industrial processes considering heat pumping: Case study of a dairyRenewable Energy. 2018. DOI : 10.1016/j.renene.2017.07.027.
Thermo-economic analysis and multi-objective optimisation of lignocellulosic biomass conversion to Fischer-Tropsch fuelsSustainable Energy & Fuels. 2018. DOI : 10.1039/C7SE00468K.
Optimal design of solid-oxide electrolyzer based power-to-methane systems: A comprehensive comparison between steam electrolysis and co-electrolysisApplied Energy. 2018. DOI : 10.1016/j.apenergy.2017.11.050.
Identification of optimal operating strategy of direct air-cooling condenser for Rankine cycle based power plantsApplied Energy -Barking then Oxford-. 2018. DOI : 10.1016/j.apenergy.2017.10.081.
Generic superstructure synthesis of organic Rankine cycles for waste heat recovery in industrial processesApplied Energy. 2018. DOI : 10.1016/j.apenergy.2017.12.094.
The optimum is not the goal: Capturing the decision space for the planning of new neighborhoodsFrontiers in Built Environment. 2018. DOI : 10.3389/fbuil.2017.00076.
IntegrCiTy - D2.3 Report - Enabling and integrating a common IT structure: Definition of a back-end layer architecture2017-06-15
SCCER-FURIES - A decision support tool for the geo-localised design and assessment of the integration of multi-carrier/multi-services/multi-grids innovative energy conversion systems in urban systems and industrial clusters - Deliverable 1.5.42017-03-31
SCCER-FURIES - Report on the role of multi-carrier, multi-services, multi-grids integrated energy conversion systems and their possible role in the Swiss energy 2050 - Deliverable D1.5.32017-03-31
Integrated energy planning assistance for major consumers - Application : HUG – Cluse Roseraie Hospital district2017-03-01
Analysis and Optimization of CO2-networks2017-02-03
Optimal operation strategies for the SLC pavilion under different energy supply scenarios2017-01-30
Investigation of topographic and physical properties of heating networks to derive empiric correlations2017-01-14
The swiss potential of model predictive control for building energy systems2017. 017 IEEE PES Innovative Smart Grid Technologies Conference Europe (ISGT-Europe), Torino, Italy, september 26-29, 2017. p. 1-6. DOI : 10.1109/ISGTEurope.2017.8260100.
Thermo-economic and environmental comparison of supercritical water and enzymatic hydrolysis of sugarcane bagasse in a biorefinery conceptEnergy. 2017. DOI : 10.1016/j.energy.2017.09.075.
Techno-Economic and Environmental Optimization of Palm-based Biorefineries in the Brazilian Context, 27th European Symposium on Computer Aided Process Engineering2017. 27th European Symposium on Computer Aided Process Engineering, Barcelona, Spain, October 1-5, 2017. p. 2611-2616. DOI : 10.1016/B978-0-444-63965-3.50437-2.
A general superstructure for the optimal synthesis and design of power and inverse Rankine cycles, 27th European Symposium on Computer Aided Process Engineering2017. 27th European Symposium of Computer Aided Chemical Process Engineering, Barcelona, Spain, October 1-5, 2017. p. 2407-2412. DOI : 10.1016/B978-0-444-63965-3.50403-7.
A Hybrid Methodology for Combined Interplant Heat, Water, and Power Integration2017. 27th European Symposium On Computer Aided Process Engineering, Barcelona, Spain, October 1-5, 2017. p. 1969-1974. DOI : 10.1016/B978-0-444-63965-3.50330-5.
Industrial integration of biotechnological processes from raw material to energy integration: Study by Modeling ApproachMicrobial Fuels: Technologies and Applications; CRC Press, 2017.
Integrated multi-objective differential evolution and its application to amine absorption process for natural gas sweeteningMulti-Objective Optimization: Techniques and Applications in Chemical Engineering; G.P Rangaiah, second edition, 2017.
Multi-Objective Optimization Programs and their Application to Amine Absorption Process Design for Natural Gas SweeteningMulti-objective Optimization: Techniques and Applications in Chemical Engineering; Singapore: Rangaiah G. P., 2017.
Multi-objective optimization of a sugarcane biorefinery for integrated ethanol and methanol productionEnergy. 2017. DOI : 10.1016/j.energy.2015.06.104.
Multi-objective optimization of utility systems and heat exchanger networks: method and application to the solar assisted hydrothermal gasification case2017. 27th European Symposium on Computer-Aided Process Engineering (ESCAPE), Barcelona, SPAIN, OCT 01-05, 2017. p. 781-786. DOI : 10.1016/B978-0-444-63965-3.50132-X.
Synthesis of single and interplant non-isothermal water networksJournal Of Environmental Management. 2017. DOI : 10.1016/j.jenvman.2017.05.001.
Robust multi-objective optimization of gasifier and solid oxide fuel cell plant for electricity production using woodEnergy. 2017. DOI : 10.1016/j.energy.2017.04.146.
General Superstructure Synthesis and Bi-level Solution Strategy for Industrial Heat Pumping27th European Symposium on Computer Aided Process Engineering; Amsterdam: Elsevier, 2017. p. 1159-1164.
A process integration method with multiple heat exchange interfaces2017. 30th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, San Diego, California, USA, July 2-6, 2017. p. 1447-1460.
In-building waste water heat recovery: An urban-scale method for the characterisation of water streams and the assessment of energy savings and costs (vol 192, pg 110, 2017)Applied Energy. 2017. DOI : 10.1016/j.apenergy.2017.07.106.
MINLP model and two-stage algorithm for the simultaneous synthesis of heat exchanger networks, utility systems and heat recovery cyclesComputers & Chemical Engineering. 2017. DOI : 10.1016/j.compchemeng.2017.01.043.
Iterative simulation and optimization approach for energy performance evaluation of ground source heat pump systems2017
Integration of CO2 networks and Power to Gas for emerging energy autonomous cities in Europe2017. ECOS 2017 - The 30th Environmental Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy systems, San Diego, California, USA, July 2-6, 2017.
Strategic energy planning under uncertaintyEPFL, 2017. DOI : 10.5075/epfl-thesis-7961.
Novel district heating and cooling energy network using CO2 as a heat and mass transfer fluid2017. 12th International Energy Agency Heat Pump Conference – HPC2017, Rotterdam, Holland, Mai 15-18, 2017.
Energy Integration on a Gasoline Engine for Efficiency ImprovementInternational Journal Of Thermodynamics. 2017. DOI : 10.5541/ijot.5000190601.
Simultaneous optimisation of Multiple-Effect Evaporation Systems and Heat Exchanger Network2017. 20th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES'17), Tianjin, China, August 21-24, 2017.
Model Predictive Control Strategies for Polygeneration systems and microgridsEPFL, 2017. DOI : 10.5075/epfl-thesis-6778.
Energy integration on a gasoline engine for a vehicular application2017. The 30th International Conference On Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, San Diego, California, USA, July 2-6, 2017.
Virtual Sector Profiles for Innovation Sharing in Process Industry – Sector 01: Chemicals2017. International Conference on Sustainable Design and Manufacturing - SDM17, Bologna, Italy, April 26-28, 2017. p. 569-578. DOI : 10.1007/978-3-319-57078-5_54.
Product diversification in the sugarcane biorefinery through algae growth and supercritical CO 2 extraction: Thermal and economic analysisRenewable Energy. 2017. DOI : 10.1016/j.renene.2017.05.022.
Environomic design for electric vehicles with an integrated solid oxide fuel cell (SOFC) unit as a range extenderRenewable Energy; Oxford: Elsevier, 2017. p. 124-142.
A novel MILP approach for simultaneous optimization of water and energy: Application to a Canadian softwood Kraft pulping millComputers & Chemical Engineering. 2017. DOI : 10.1016/j.compchemeng.2016.11.043.
Exergy assessment of future energy transition scenarios with application to Switzerland2017. 30th International Conference on Efficiency, Cost, Optimisation, Simulation and Environmental Impact of Energy Systems, San Diego, California, USA, July 2-6, 2017.
Optimal use of biomass in large-scale energy systems: insights for energy policyEnergy. 2017. DOI : 10.1016/j.energy.2017.05.027.
Defining density and land uses under energy performance targets at the early stage of urban planning processes2017. CISBAT, Lausanne, Switzerland, September 6-8, 2017. p. 301-306. DOI : 10.1016/j.egypro.2017.07.326.
Interactive optimization for the planning of urban systems2017. CISBAT, Lausanne, Switzerland, September 6-8, 2017. p. 445-450. DOI : 10.1016/j.egypro.2017.07.383.
Multicriteria Decisions in Urban Energy System Planning: A ReviewFrontiers in Energy Research. 2017. DOI : 10.3389/fenrg.2017.00010.
Obstacles in energy planning at the urban scaleSustainable Cities And Society. 2017. DOI : 10.1016/j.scs.2017.02.003.
Estimating the potential for thermal load management in buildings at a large scale: overcoming challenges towards a replicable methodology2017. 8th International Conference on Sustainability in Energy and Buildings (SEB), Politecnico Torino, Turin, ITALY, SEP 11-13, 2016. p. 750-759. DOI : 10.1016/j.egypro.2017.03.236.
Feasibility study of a CO2-based system in NEST2017
Energy efficiency as an example of cross-discipline collaboration in chemical engineeringChemical Engineering Research & Design. 2017. DOI : 10.1016/j.cherd.2017.01.020.
Energy Integration On Multi-Periods For Vehicle Thermal Powertrains2017. European Workshop on Process Safety and Loss Prevention at 10th European Congress of Chemical Engineering (ECCE) / 3rd European Congress of Applied Biotechnology (ECAB) / 5th European Process Intensificatiion Conference (EPIC), Nice, FRANCE, SEP 27-OCT 01, 2015. p. 253-264. DOI : 10.1002/cjce.22588.
Multi-objective optimization and exergoeconomic analysis of a combined cooling, heating and power based compressed air energy storage systemEnergy Conversion and Management. 2017. DOI : 10.1016/j.enconman.2017.01.071.
Spatial clustering for district heating integration in urban energy systems: application to geothermal energyApplied Energy. 2017. DOI : 10.1016/j.apenergy.2016.12.136.
Simultaneous synthesis of non-isothermal water networks integrated with process streamsEnergy. 2017. DOI : 10.1016/j.energy.2017.07.018.
Characterisation of domestic hot water end-uses for integrated urban thermal energy assessment and optimisationApplied Energy. 2017. DOI : 10.1016/j.apenergy.2016.02.107.
Early-stage decision making approach for the selection of optimally integrated biorefinery processes2017. The 29th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Portoroz, Slovenia, June 19-23, 2016. p. 908-916. DOI : 10.1016/j.energy.2017.03.080.
In-building waste water heat recovery: urban-scale methods for the characterisation of water streams and the assessment of energy savings and costsApplied Energy. 2017. DOI : 10.1016/j.apenergy.2017.01.096.
Multi-objective Optimization of Supercritical Water Gasification of Leftover Brazilian Ginseng Roots After Phytochemical Recovery StepsBrazilian Journal of Chemical Engineering. 2017. DOI : 10.1590/0104-6632.20170343s20150279.
Safety issues of a CO2-based System in NEST2016
Apparatus for salt separation under supercritical water conditionsCN107108298 ; US10654738 ; EP3245165 ; US2018009692 ; EP3245165 ; CN107108298 ; WO2016113685 ; EP3045433 . 2016.
Towards energy-autonomous cities using CO2 networks and Power to Gas storage2016. 29th International Conférence on Efficiency, Cost, Optimization, Simulation and Environmental Impact of energy systems, Postoroz, Slovenia, June 19-23, 2016.
Methodology for the optimal design of an integrated sugarcane distillery and cogeneration process for ethanol and power production2016. 28th International Conference on Efficiency, Cost, Optimization, Simulation, and Environmental Impact of Energy Systems (ECOS). p. 540-549. DOI : 10.1016/j.energy.2016.07.018.
Distributed model predictive control of energy systems in microgrids2016. 2016 Annual IEEE Systems Conference (SysCon), Orlando, FL, USA, 18-21 April 2016. p. 1-6. DOI : 10.1109/SYSCON.2016.7490607.
Combined water and energy integration in industrial processes with restricted connections2016. 2016 AIChE Annual Meeting, San Francesco, CA, USA, November 11-18, 2016.
Analysis, Synthesis and Optimization of Multiple-Effect Evaporation Systems using Mathematical Programming2016. 2016 AIChE Annual Meeting, San Francesco, CA, USA, November 11-18, 2016.
Synthesis of non-isothermal water networks including process hot and cold streams2016. 2nd South East European Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES), Piran, Slovenia, June 15–18,2016.
Synthesis of non‒isothermal interplant water networks2016. 2nd South East European Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES), Piran, Slovenia, June 15–18,2016.
Methodology for the design and comparison of optimal production configurations of first and first and second generation ethanol with powerApplied Energy. 2016. DOI : 10.1016/j.apenergy.2016.09.100.
Integration of deep geothermal energy and woody biomass conversion pathways in urban systemsEnergy Conversion and Management. 2016. DOI : 10.1016/j.enconman.2016.09.079.
Economical Analysis of a Pressurized Fluid-Based Process Applied for Phytochemicals Recovery in a Sustainable Biorefinery Concept for Brazilian Ginseng Roots2016. 2nd International Conference on Biomass (IConBM), Taormina, ITALY, JUN 19-22, 2016. p. 355-360. DOI : 10.3303/Cet1650060.
Efficiency Improvement for Vehicle Powertrains Using Energy Integration TechniquesInternational Journal Of Thermodynamics. 2016. DOI : 10.5541/ijot.5000148414.
Interactive optimization for planning of urban energy systems using parallel coordinatesUrban Transitions Global Summit, Shanghai, China, September 5-9, 2016.
Massive 3D models and physical data for building simulation at the urban scale2016
A method for taking into account seasonal storage in a district energy system optimisation problem2016. 15th International Symposium on District Heating and Cooling, Seoul, Republic of Korea (South Korea), September 4-7, 2016.
Towards optimal design of solar assisted industrial processes: Case study of a dairy2016. The 29th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Portoroz, Slovenia, June 19-23, 2016.
Multi-objective Optimization of Solid Oxide Fuel Cell–Gas Turbine Hybrid Cycle and Uncertainty Analysis2016. The 29th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Portoroz, Slovenia, June 19-23, 2016.
Establishing links for the planning of sustainable districts2016. Sustainable Built Environment (SBE) Regional Conference, Zurich, Switzerland, June 13-17, 2016. p. 760. DOI : 10.3218/3774-6_82.
Optimal use of biomass in large-scale energy systems: insights for energy policy2016. The 29th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Portoroz, Slovenia, June 19-23, 2016. DOI : 10.1016/j.energy.2017.05.027.
The information platform energyscope.ch on the energy transition scenarios2016. The 29th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Portoroz, Slovenia, June 19-23, 2016.
Environomic design of hybrid electric vehicles2016. The 29th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Portoroz, Slovenia, June 19-23, 2016.
In-building waste water heat recovery: an urban scale method for energy saving assessments2016. The 29th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Portoroz, Slovenia, June 19-23, 2016.
Model-based optimization of distributed and renewable energy systems in buildingsEnergy and Buildings. 2016. DOI : 10.1016/j.enbuild.2016.03.051.
Thermo-economic optimization of a combined cooling, heating and power system based on small-scale compressed air energy storageEnergy Conversion and Management. 2016. DOI : 10.1016/j.enconman.2016.03.087.
Methodology for the optimal design of an integrated first and second generation ethanol production plant combined with power cogenerationBioresource Technology. 2016. DOI : 10.1016/j.biortech.2016.04.130.
Methodology for streams definition and graphical representation in Total Site Analysis2016. 29th International Conference on Efficiency, Cost, Optimisation, Simulation and Environmental Impact of Energy Systems (ECOS), Portorož, Slovenia, June 19-23, 2016.
Energy Efficiency and Integration in the Refining and Petrochemical IndustriesEPFL, 2016. DOI : 10.5075/epfl-thesis-7038.
The Impact of Uncertainty in National Energy PlanningEnergy Systems Conference, London, UK, June 14-15, 2016.
Strategic Energy Planning under Uncertainty: a Mixed-Integer Linear Programming Modeling Framework for Large-Scale Energy Systems2016. 26th European Symposium on Computer Aided Process Engineering, Portorož, Slovenia, June 12-15, 2016. p. 1899-1904. DOI : 10.1016/B978-0-444-63428-3.50321-0.
Key Energy and Technological Aspects of Three Innovative Concepts of District Energy NetworksEnergy. 2016. DOI : 10.1016/j.energy.2016.05.065.
Intra-day electro-thermal model predictive control for polygeneration systems in microgridsEnergy. 2016. DOI : 10.1016/j.energy.2016.03.081.
Biomass Modelling: estimating thermodynamic properties from the elemental compositionFuel. 2016. DOI : 10.1016/j.fuel.2016.04.111.
Environmental, Energetic and Economic Evaluation of Implementing a Supercritical Fluid-Based Nanocellulose Production Process in a Sugarcane Biorefinery2016. NINE: International Conference on nanotechnology based innovative applications for the environment, Rome, Italy, March 20-23, 2016. p. 49-54. DOI : 10.3303/CET1647009.
Combining Geographical Information Systems and Optimization for Geothermal Energy Integration in Urban Systems - The case study of the City of Lausanne2016
Uncertainty Classification for Strategic Energy PlanningSIAM Conference on Uncertainty Quantification, EPFL, Lausanne, Switzerland, April 5-8, 2016.
City Energy Analyst (CEA): Integrated framework for analysis and optimization of building energy systems in neighborhoods and city districtsEnergy And Buildings. 2016. DOI : 10.1016/j.enbuild.2015.11.055.
Optimal Operations and Resilient Investments in Steam NetworksFrontiers in Energy Research. 2016. DOI : 10.3389/fenrg.2016.00001.
Potential of refrigerant based district heating and cooling networksEPFL, 2016. DOI : 10.5075/epfl-thesis-6935.
Optimal design methods applied to solar-assisted hydrothermal gasification plantsEPFL, 2016. DOI : 10.5075/epfl-thesis-6945.
Techno–economic design of hybrid electric vehicles and possibilities of the multi-objective optimization structureApplied Energy. 2016. DOI : 10.1016/j.apenergy.2015.09.071.
CO2-mitigation options for the offshore oil and gas sectorApplied Energy. 2016. DOI : 10.1016/j.apenergy.2015.09.088.
Multiperiod Sequential Synthesis of Heat Exchanger Networks and Utility Systems including storages2016. 26th European Symposium on Computer Aided Process Engineering, Portoroz, June 2016.
Targeting Optimal Design and Operation of Solar Heated Industrial Processes: A MILP Formulation2016. 4th International Conference on Solar Heating and Cooling for Buildings and Industry (SHC), Istanbul, TURKEY, DEC 02-04, 2015. p. 668-680. DOI : 10.1016/j.egypro.2016.06.229.
Energy Planning in the Urban Context: Challenges and Perspectives2015. 6th International Building Physics Conference (IBPC), Torino, Italy, June 14-17, 2015. p. 3366-3371. DOI : 10.1016/j.egypro.2015.11.752.
Methodology for energy audits in the framework of the Energy Efficiency DirectiveECCE10 + ECAB3 + EPIC5, Nice, September 30, 2015.
Optimization of heat supply for an entire district at building scale2015
Regression Analysis of Building Energy Demand2015
Environomic multi-objective optimization of an eco-industrial park2015. SETAC Europe 25th Annual Meeting, Barcelona, Catalonia, Spain, May 3-7, 2015.
Applications of Pinch Analysis and Mathematical Programming Methods for Synthesizing Non-Isothermal Water Networks2015. 2015 AIChE Annual Meeting, Salt Lake City, UT, USA, November 8-13, 2015.
Techno-economic design of hybrid electric vehicles using multi objective optimization techniquesEnergy. 2015. DOI : 10.1016/j.energy.2015.08.073.
Energy integration study on a hybrid electric vehicle energy system, using process integration techniquesApplied Thermal Engineering. 2015. DOI : 10.1016/j.applthermaleng.2015.08.094.
Multi-period analysis of heat integration measures in industrial clustersEnergy. 2015. DOI : 10.1016/j.energy.2015.09.023.
Analysis of energy requirements versus comfort levels for the integration of phase change materials in buildingsJournal of Building Engineering. 2015. DOI : 10.1016/j.jobe.2015.03.003.
MINLP Model and two-level Algorithm for the Simultaneous Synthesis of Heat Exchanger Networks and Utility Systems2015. International Symposium on Process Systems Engineering (PSE) / European Symposium on Computer Aided Process Engineering (ESCAPE). p. 1979-1984. DOI : 10.1016/B978-0-444-63576-1.50024-8.
Framework for the Multi-period Sequential Synthesis of Heat Exchanger Networks with selection, design and scheduling of Multiple UtilitiesIndustrial and Engineering Chemistry Research. 2015. DOI : 10.1021/acs.iecr.5b02104.
Round-the-clock power supply and a sustainable economy via synergistic integration of solar thermal power and hydrogen processesProceedings of the National Academy of Sciences. 2015. DOI : 10.1073/pnas.1513488112.
Heat demand estimation for different building types at regional scale considering building parameters and urban topography2015. 6th International Building Physics Conference, Torino, Italy, June 14-17, 2015. p. 3403-3409. DOI : 10.1016/j.egypro.2015.11.758.
A solid thermal storage model for the optimization of buildings operation strategyEnergy. 2015. DOI : 10.1016/j.energy.2015.04.085.
Multi-objective optimization of SNG production from microalgae through hydrothermal gasificationComputers and Chemical Engineering. 2015. DOI : 10.1016/j.compchemeng.2015.01.013.
Geothermal EnergySeminar, Energy Conversion Master course, Prof. François Maréchal, EPFL.
Biomass to Liquid Fuels: Thermo-Economic Analysis and Multi-Objective Optimisation Framework10th European Congress of Chemical Engineering, 3rd European Congress of Applied Biotechnology, 5th European Process Intensification Conference, Nice, France, September 30th - October 1st, 2015.
Performance and economic optimization of an organic rankine cycle for a gasoline hybrid pneumatic powertrainEnergy. 2015. DOI : 10.1016/j.energy.2015.04.047.
Optimum Biorefinery Pathways Selection Using the Integer-Cuts Constraint Method Applied to a MILP ProblemIndustrial & Engineering Chemistry Research. 2015. DOI : 10.1021/acs.iecr.5b01439.
Gasoline hybrid pneumatic engine for efficient vehicle powertrain hybridizationApplied Energy. 2015. DOI : 10.1016/j.apenergy.2015.03.057.
Large size biogas-fed Solid Oxide Fuel Cell power plants with carbon dioxide management: Technical and economic optimizationJournal of Power Sources. 2015. DOI : 10.1016/j.jpowsour.2015.06.091.
Key energy and technological aspects of three innovative concepts of District energy networks2015. ECOS 2015, Pau, France, June 29-July 3, 2015.
Strategic energy planning for large-scale energy systems: A modelling framework to aid decision-makingEnergy. 2015. DOI : 10.1016/j.energy.2015.06.008.
Exergy representations in thermodynamics2015. HEFAT.
Multi – objective, integrated, regional energy system optimisationSET Plan 2015, Luxembourg, Grand-Duchy of Luxembourg, September 21-22, 2015.
Thermo-Economic Analysis of a Trigeneration HCPVT Power Plant2015. CPV-11 International Conference on Concentrator Photovoltaic Systems, Aix-les-Bains, France, JUNE 13-15, 2015.
Comparative Evaluation of Three Sugarcane Supply Strategies in Colombia: Logistics, Energy and GHG EmissionsInternational Journal of Thermodynamics. 2015. DOI : 10.5541/ijot.5000071903.
Particle Swarm Optimization and Kalman Filtering for Demand Prediction of Commercial Buildings2015. ECOS 2015, Pau, France, June 30 - July 3, 2015.
Computational platform for optimal design of biorefineries using energy and mass integration24th European Symposium on Computer Aided Process Engineering (ESCAPE25), Denmark, June, 2015.
Urban Energy System Design from the Heat Perspective using mathematical Programming including thermal StorageLausanne, EPFL, 2015. DOI : 10.5075/epfl-thesis-6731.
Environomic optimal design of power plants with CO2 captureInternational Journal of Greenhouse Gas Control. 2015. DOI : 10.1016/j.ijggc.2015.05.022.
Decision support for ranking Pareto optimal process designs under uncertain market conditionsComputers & Chemical Engineering. 2015. DOI : 10.1016/j.compchemeng.2015.06.009.
Resilient decision making in steam network investments2015. Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES), Kuching, Malaysia, August 22-27,2015. p. 73-78. DOI : 10.3303/Cet1545013.
Optimisation of unit investment and load shedding in a steam network facing undercapacity2015. ECOS 2015, Pau, France, June 30 - July 3, 2015.
OsmoseLua – An Integrated Approach to Energy Systems Integration with LCIA and GIS2015. p. 587-592. DOI : 10.1016/B978-0-444-63578-5.50093-1.
Geothermal energy integration in urban systems. The case study of the city of Lausanne.2015
Energy integration on multi-periods and multi-usages for hybrid electric and thermal powertrainsEnergy. 2015. DOI : 10.1016/j.energy.2015.02.060.
Thermo-environomic optimisation strategy for fuel decarbonisation process design and analysisComputers & Chemical Engineering. 2015. DOI : 10.1016/j.compchemeng.2015.04.018.
Performance and profitability perspectives of a CO2 based district energy network in Geneva's City CentreEnergy. 2015. DOI : 10.1016/j.energy.2015.03.079.
Multi-objective, multi-period optimization of district energy systems: IV – A case studyEnergy. 2015. DOI : 10.1016/j.energy.2015.03.003.
Heat recovery networks synthesis of large-scale industrial sites: Heat load distribution problem with virtual process subsystemsEnergy Conversion and Management. 2015. DOI : 10.1016/j.enconman.2014.11.006.
Valorization of sugarcane biorefinery residues using supercritical water gasification: A case study and perspectivesThe Journal of Supercritical Fluids. 2015. DOI : 10.1016/j.supflu.2014.09.009.
Integration of Organic Rankine Cycles for Waste Heat Recovery in Industrial ProcessesLausanne, EPFL, 2015. DOI : 10.5075/epfl-thesis-6536.
Biomass To LiquidsLausanne, EPFL, 2015. DOI : 10.5075/epfl-thesis-6529.
Geothermal Energy and Biomass Integration in Urban Systems: a Case Study2015. 40th Workshop on Geothermal Reservoir Engineering, Stanford University, Stanford, California, USA, January 26-28, 2015.
Towards practical solutions for energy efficiency of large-scale industrial sitesLausanne, EPFL, 2015. DOI : 10.5075/epfl-thesis-6390.
Thermo-environomic evaluation of the ammonia productionThe Canadian Journal of Chemical Engineering. 2015. DOI : 10.1002/cjce.22126.
SolarDecathlon: Energy and water management system analysis at a building scale2014
Refinement of DHW demand modelling in EnerGIS2014
Thermo-Economic Modelling and Process Integration of CO2-Mitigation Options on Oil and Gas Platforms2014. 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Prague, Czech Republic, August 23-27, 2014. p. 1081-1086. DOI : 10.3303/CET1439181.
Multi-objective Optimization of a Rectisol® Process2014. 24th European Symposium on Computer Aided Process Engineering. p. 1249-1254. DOI : 10.1016/B978-0-444-63455-9.50043-X.
The Energy Efficiency Directive Impact on the Industry Sector: Importance of Energy Management2014. 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES), Prague, Czech Republic, August 23-27, 2014.
Environomic design of vehicle energy systems for optimal mobility serviceEnergy. 2014. DOI : 10.1016/j.energy.2014.09.019.
System Modeling and Thermo-Economic Analysis of a High Concentration Photovoltaic Thermal System2014
Thermo-economic analysis and optimization of a high concentration photovoltaic thermal (HCPVT) integrated system II2014
Multi-objective Optimization of a Solar Assisted 1st and 2nd Generation Sugarcane Ethanol Production Plant2014. ECOS 2014 - THE 27TH INTERNATIONAL CONFERENCE ON EFFICIENCY, COST, OPTIMIZATION, SIMULATION AND ENVIRONMENTAL IMPACT OF ENERGY SYSTEMS, TURKU, FINLAND, JUNE 15-19, 2014.
Modelling of a steam network using data reconciliation as a management toolEnergy Systems Conference, London, June 24-25.
Potentiels thermo-économiques comparés de réseaux avancés fonctionnant au CO2 et à l’eau2014
Robust Optimization for Strategic Energy Planning2014
Integration of Supercritical Water Gasification in Combined 1G/2G Ethanol Production2014. 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2014), Prague, Czech Republic, 23–27 August 2014. p. 1795-1800. DOI : 10.3303/Cet1439300.
Thermo-Economic Optimisation of Integrated Ethanol and Methanol Production in the Sugarcane Industry2014. 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2014), Prague, Czech Republic, 23–27 August 2014. p. 1741-1746. DOI : 10.3303/Cet1439291.
Methodology for Identification of Suitable ORC-Cycle and Working-Fluid using Integration with Multiple Objectives2014. 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2014)', 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2014). p. 1141-1146. DOI : 10.3303/Cet1439191.
Model Predictive Control Strategies for Low-Voltage Microgrids2014. 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2014)', u'17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2014). p. 1123-1128. DOI : 10.3303/Cet1439188.
Swiss-EnergyScope.ch: a Platform to Widely Spread Energy Literacy and Aid Decision-Making2014. 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2014). p. 877-882. DOI : 10.3303/Cet1439147.
Environomic Design of Vehicle Integrated Energy System - Application on a Hybrid Electric Vehicle Energy System2014. 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2014)', 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2014). p. 475-480. DOI : 10.3303/Cet1439080.
Energy Integration of Large-Scale Industrial Sites with Target-Compatible Sub-System Division Strategy2014. 17th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2014), Prague, CZECH REPUBLIC, AUG 23-27, 2014. p. 43-48. DOI : 10.3303/Cet1439008.
An Improved Linear Programming Approach for Simultaneous Optimization of Water and Energy2014. p. 1561-1566. DOI : 10.1016/B978-0-444-63455-9.50095-7.
Sustainability assessment of lignocellulosic biorefineries under uncertaintyLausanne, EPFL, 2014. DOI : 10.5075/epfl-thesis-6231.
Review, modeling, Heat Integration, and improved schemes of Rectisol®-based processes for CO2 captureApplied Thermal Engineering. 2014. DOI : 10.1016/j.applthermaleng.2014.05.001.
New proposal for production of bioactive compounds by supercritical technology integrated to a sugarcane biorefineryClean Technologies And Environmental Policy. 2014. DOI : 10.1007/s10098-014-0760-5.
Oil and gas platforms with steam bottoming cycles: System integration and thermoenvironomic evaluationApplied Energy. 2014. DOI : 10.1016/j.apenergy.2014.06.034.
Systèmes énergétiques pour les îlots urbains à Genève2014
Methodology for Minimising the Utility Consumption of a 2g Ethanol ProcessChemical Engineering Transactions. 2014. DOI : 10.3303/CET1439016.
Thermo-economic optimization of a Solid Oxide Fuel Cell – Gas turbine system fuelled with gasified lignocellulosic biomassEnergy Conversion and Management. 2014. DOI : 10.1016/j.enconman.2014.02.009.
Heat exchanger network design of large-scale industrial site with layout inspired constraintsComputers & Chemical Engineering. 2014. DOI : 10.1016/j.compchemeng.2014.09.012.
Robust optimization for strategic energy planning1st European Conference on Stochastic Programming and Energy Applications (EuroCSP2014), Paris, France, September 24-26, 2014.
Integrating Rate Based Models into a Multi-Objective Process Design & Optimisation Framework using Surrogate ModelsLausanne, EPFL, 2014. DOI : 10.5075/epfl-thesis-6302.
Energy Efficient Cruise Ships HVAC Loads2014
Study of hydrogen storage and compression2014
ENERGY STORAGE: LIQUID CH4 AND CO2 NETWORK INTEGRATION2014
Study of district heating potential in power plants with CO2 capture2014
￼Process System Engineering and the energy transition, Smart technologies needs smart engineers.FIPSE 2, Creta, 21-13 June, 2014.
Multi-objectives, multi-period optimization of district energy systems: I. Selection of typical operating periodsComputers & Chemical Engineering. 2014. DOI : 10.1016/j.compchemeng.2014.03.005.
Targeting the retrofit of large-scale industrial plant with multi-objective optimizationENERGY. 2014.
Torrefaction modelling for lignocellulosic biomass conversion processesEnergy. 2014. DOI : 10.1016/j.energy.2014.03.086.
Role of total site integration in energy-target modification of distillation columnsApplied Thermal Engineering. 2014.
A general methodology for energy efficiency of industrial chemical processes2014. p. 411-416. DOI : 10.1016/B978-0-444-63433-7.50053-5.
Targeting the Retrofit of industrial utility system and heat exchanger network2014. 27st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Åbo Akademi University, Turku, Finland, Jun 15-19, 2014.
An assessment of different solvent-based capture technologies within an IGCC–CCS power plantEnergy. 2014. DOI : 10.1016/j.energy.2013.10.081.
Decision Support for CO2 Capture Process Options under Uncertain Market Conditions using Multi-objective Optimisation2014. p. 1207-1212. DOI : 10.1016/B978-0-444-63455-9.50036-2.
Life Cycle Assessment Based Process Design of CO2 Capture Options2014. p. 1033-1038. DOI : 10.1016/B978-0-444-63455-9.50007-6.
Clustering Urban Areas for Optimizing the Design and the Operation of District Energy Systems2014. p. 1291-1296. DOI : 10.1016/B978-0-444-63455-9.50050-7.
Multi-objectives, multi-period optimization of district energy systems: III. Distribution networksComputers & Chemical Engineering. 2014. DOI : 10.1016/j.compchemeng.2014.02.018.
Multi-objectives, multi-period optimization of district energy systems: II—Daily thermal storageComputers & Chemical Engineering. 2014. DOI : 10.1016/j.compchemeng.2013.10.016.
Site-scale process integration and utility optimization with multi-level energy requirement definitionEnergy Conversion and Management. 2014. DOI : 10.1016/j.enconman.2014.02.005.
Process design optimization strategy to develop energy and cost correlations of CO2 capture processesComputers and Chemical Engineering. 2014. DOI : 10.1016/j.compchemeng.2013.10.011.
Design & Optimisation of an Innovative Solid Oxide Fuel Cell – Gas Turbine Hybrid Cycle for Small Scale Distributed GenerationFuel Cells. 2014. DOI : 10.1002/fuce.201300196.
Integrating rate based models into multi-objective optimisation of process designs using surrogate models2013. 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy System, Guilin, China, Juillet 16-19, 2013.
Thermodynamic analysis, energy integration and flowsheet improvement of a methanol absorption acid gas removal process2013. p. 211-216. DOI : 10.3303/CET1335035.
Design of solar driven supercritical water desalination plant2013
A methodology for creating sequential multi-period base-case scenarios for large data sets2013. PRES, Rhodes, Greece, September 29 - October 2, Greece. p. 1231-1236. DOI : 10.3303/CET1335205.
Potentiel thermo-économique d’un réseau CO2 appliqué à divers environnements urbains2013
Method for Combined Water-Energy Recovery in Industrial Processes2013
Process engineering method for systematically comparing CO2 capture options2013. 23rd European Symposium on Computer Aided Process Engineering (ESCAPE). p. 367-372. DOI : 10.1016/B978-0-444-63234-0.50062-2.
Energy Integration in the cement industry2013. p. 349-354. DOI : 10.1016/B978-0-444-63234-0.50059-2.
Multi-objective optimization of SNG production through hydrothermal gasification from microalgae2013. p. 337-342. DOI : 10.1016/B978-0-444-63234-0.50057-9.
Defining “Waste Heat” for industrial processesApplied Thermal Engineering. 2013. DOI : 10.1016/j.applthermaleng.2013.03.020.
Life cycle optimization of energy-intensive processes using eco-costsThe International Journal of Life Cycle Assessment. 2013. DOI : 10.1007/s11367-013-0560-x.
La capture de CO2 dans les centrales électriquesBulletin Fachzeitschrift und Verbandsinformationen von Electrosuisse und VSE. 2013.
Energy Consumption Versus Antioxidant Activity of Pressurized Fluid Extracts from Pfaffia glomerata RootsCHEMIICAL ENGIINEERIING TRANSACTIIONS. 2013. DOI : 10.3303/CET1335183.
Optimal Design of Solar Assisted Hydrothermal Gasification for Microalgae to Synthetic Natural Gas ConversionCHEMIICAL ENGIINEERIING TRANSACTIIONS. 2013. DOI : 10.3303/CET1335168.
Thermo-Economic Optimization of Integrated First and Second Generation Sugarcane Ethanol PlantCHEMICAL ENGINEERING TRANSACTIONS. 2013. DOI : 10.3303/CET1335087.
Multi-objective, multi-period optimization of district energy systems: Networks design2013. p. 463-468. DOI : 10.1016/B978-0-444-63234-0.50078-6.
Demand Side Management et réseaux CAD2013
Thermoeconomic design optimization of a thermo-electric energy storage system based on transcritical CO2 cyclesEnergy. 2013. DOI : 10.1016/j.energy.2013.05.038.
Synthesis and thermo-economic design optimization of wood-gasifier-SOFC systems for small scale applicationsBiomass and Bioenergy. 2013. DOI : 10.1016/j.biombioe.2013.01.003.
Increasing Efficiency of Fuel Ethanol Production from Lignocellulosic Biomass by Process IntegrationEnergy & Fuels. 2013. DOI : 10.1021/ef301952u.
Study of optimal design of polygeneration systems in optimal control strategies2013. 15th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES) in Collaboration with the CHISA Congress, Prague, CZECH REPUBLIC, AUG 25-29, 2012. p. 134-141. DOI : 10.1016/j.energy.2013.03.070.
Dynamic Modeling and Simulation of Two-phase Evaporators and Condensers in the context of a CO2 Based District Energy Network2013. ECOS 2013, Guilin, PRC, July 16-19, 2013.
INTEGRATION OF A SEASONAL STORAGE2013
Overview over the design (and planning) of Urban energy systems2013
Application of dynamic building simulation for the study of urban energy systems2013
MEU: An urban energy management tool for communities and multi-energy utilities2013. CISBAT 2013, Lausanne, Switzerland, September 4-6, 2013.
ECOS: Integrated and practical energy planning for new districts2013. 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy, Guilin, China, July 16-19, 2013.
ECOS: Solar Potential Assessment on Roofs of Urban Areas and its Integration2013. 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy, Guilin, China, July 16-19, 2013.
Evaluation of advanced technologies based on integration techniques - Application on dividing wall column2013
Heat Integration and Exergy Analysis of Reactors2013
Energy efficiency improvement by applying thermodynamic optimization of distillation columns in the site scale integration2013. 14th Congrès de la Société Française de Génie des Procédés, Lyon, France, Octobre 8-10, 2013.
Site-scale process integration and utility optimization with multiple representations of heating and cooling requirements: Application to an existing chemical plant2013. The 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, GUILIN, CHINA, JULY 16-19, 2013.
Thermo-economic Optimization of a Solid Oxide Fuel Cell - Gas Turbine system fuelled with Gasified Lignocellulosic Biomass2013
Thermo-economic optimization of a Solid Oxide Fuel Cell - Gas Turbine system fuelled with gasified lignocellulosic biomass2013. ECOS 2013, Guilin , China, July 15-19, 2013.
Thermo-economic and environmental model of microalgae-to-SNG conversion process through hydrothermal gasification2013. SFGP 2013, Lyon, France, October 8-10, 2013.
Sustainable energy systems, a process system engineering perspective7th confenrece on Energy sustainability, 11th International Fuel Cell Science, Engineering and Technology conference of ASME, Minneapolis, Minnesota, July 14-19, 2013.
Thermo-chemical production of F-T fuels from lignocellulosic biomass: Heat integration of gasification2013. XIVeme Congres SFGP 2013, Lyon, France, Octobre 8-10.
Process Integration of Lignocellulosic Biomass Pre-treatment in the Thermo-Chemical Production of F-T Fuels. Centralised Versus Decentralised Scenarios2013. PRES13 - 16th Conference Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Rhodes, Greece, 29 September - 2 October.
Thermo-economic evaluation and optimization of the thermo-chemical conversion of biomass into methanolEnergy. 2013. DOI : 10.1016/j.energy.2013.05.029.
A systematic methodology for the environomic design and synthesis of energy systems combining process integration, Life Cycle Assessment and industrial ecologyComputers & Chemical Engineering. 2013. DOI : 10.1016/j.compchemeng.2013.05.025.
Thermo-economic modeling of membrane processes for CO2 capture2013
Design of the heat exchanger network for the SOFC-GT concept2013
Formic acid: Thermo-economic evaluation2013
Life Cycle Assessment and Environomic Optimization of Concentrating Solar Thermal Power Plants2013. 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS2013), Guilin, China, July 16-19, 2013.
Methodology using process integration for identifying suitable Organic Rankine Cycles for waste heat valorisationInternational Process Integration Jubilee Conference 2013, Gothenburg, Sweden, March 18-20, 2013.
Multi-Layer Representation of Energy Requirement for Site Scale IntegrationInternational Process Integration Jubilee, Gothenburg, Chalmers, Sweden, March 18-20, 2013.
Thermo-environomic evaluation of the ammonia production2013. XIVe Congrès SFGP, Lyon, France, October 8-10, 2013.
Energy integration optimisation of chilled ammonia process for CO2 capture2013. 9th European Congress of Chemical Engineering, The Hague, The Netherlands, April 21-25, 2013.
The role of process integration techniques in the thermo-economic optimization of energy conversion systemsInternational Process Integration Jubilee Conference, Gothenburg, Sweden, March 18-20, 2013.
Thermo-environomic optimisation of fuel decarbonisation alternative processes for hydrogen and power productionLausanne, EPFL, 2013. DOI : 10.5075/epfl-thesis-5655.
Multi-objective, multi-period optimization of biomass conversion technologies using evolutionary algorithms and mixed integer linear programming (MILP)Applied Thermal Engineering. 2013. DOI : 10.1016/j.applthermaleng.2011.11.035.
Energy efficiency in waste water treatments plants: Optimization of activated sludge process coupled with anaerobic digestion2012. p. 153-164. DOI : 10.1016/j.energy.2011.03.078.
A GENERAL AND OPERATIONAL METHODOLOGY FOR ENERGY EFFICIENCY OF INDUSTRIAL CHEMICAL PROCESSESJournée de thesard de Rhodia, Lyon, France, Nov 15, 2012.
Proposition of methodology for optimization of energy system design under uncertainty2012. 22nd European Symposium on Computer Aided Process Engineering (ESCAPE). p. 302-306. DOI : 10.1016/B978-0-444-59519-5.50061-7.
Defining the potential of usable waste heat in industrial processes with the help of pinch and exergy analysis2012. 15th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Prague, Czech Republic, August 25-29, 2012. p. 103-108. DOI : 10.3303/CET1229018.
Urban Energy System Analysis2012
Heat pump integration in a cheese factoryApplied Thermal Engineering. 2012. DOI : 10.1016/j.applthermaleng.2011.11.050.
Integration of Life Cycle Assessment in the conceptual design of renewable energy conversion systemsLausanne, EPFL, 2012. DOI : 10.5075/epfl-thesis-5564.
Energy system design under uncertaintyLausanne, EPFL, 2012. DOI : 10.5075/epfl-thesis-5559.
Conceptual design of a thermo-electrical energy storage system based on heat integration of thermodynamic cycles – Part B: Alternative system configurationsEnergy. 2012. DOI : 10.1016/j.energy.2012.03.033.
Conceptual design of a thermo-electrical energy storage system based on heat integration of thermodynamic cycles – Part A: Methodology and base caseEnergy. 2012. DOI : 10.1016/j.energy.2012.03.031.
Assessment of Environmental Impacts Related to Shale Gas Extraction in the Polish Contex2012
THERMO-ENVIRONOMIC EVALUATION OF AMMONIA PRODUCTION2012
Enjeux de la compensation CO2 en Suisse - présentation d’une méthodologie pour la comparaison des projets2012
THERMOECONOMIC ANALYSIS AND OPTIMISATION OF AIR-BASED BOTTOMING CYCLES FOR WATER-FREE HYBRID SOLAR GAS-TURBINE POWER PLANTS2012
Modélisation et optimisation de système énergétique intégré dans un environnement urbain composé de plusieurs bâtiments2012
Environmental and economic analysis of the heating of a building2012
Polymer spiral film gas-liquid heat exchanger for waste heat recovery in exhaust gases2012
A Techno Assessment of Different Solvent- based Capture Technologies Within an IGCC-CCS Power-station2012
Study of the Integration of District Heating and Cooling with an Electro-Thermal Energy Storage System2012
Enthalpy and exergy analysis in the framework of a district scale energy balance2012
THERMAL STORAGE AIMING AT INCREASING THE SHARE OF USED HEAT REJECTED FROM A COOLING PROCESS2012
APPLICATION OF EXERGY ANALYSIS IN ENERGY REQUIREMENT ASSAY OF THE TYPICAL PROCESS UNIT OPERATIONS2012
CO2 mitigation in thermo-chemical hydrogen processes: Thermo-environomic comparison and optimizationEnergy Procedia. 2012. DOI : 10.1016/j.egypro.2012.09.072.
Chauffe repas Solar Impulse2012
Application of Exergy Analysis in Energy Requirements Assay of the Typical Process Unit Operations of Chemical Industries2012
Thermo-economic analysis and modeling of oxyfuel processes2012
Performance evolution and modeling of PEM fuel cell systems2012
Physical absorption processes modeling and analysis for CO2 capture2012
CHARACTERIZATION OF THE THERMOECONOMIC OPTIMIZATION PROBLEM OF AN ELECTRICITY STORAGE SYSTEM BASED ON THEORETICAL THERMODYNAMIC CYCLES2012
Environomic optimal configurations of geothermal energy conversion systems: Application to the future construction of Enhanced Geothermal Systems in SwitzerlandEnergy. 2012. DOI : 10.1016/j.energy.2012.06.068.
Environomic optimal design and synthesis of energy conversion systems in urban areas2012. p. 41-45. DOI : 10.1016/B978-0-444-59519-5.50009-5.
CO2 Mitigation in Thermo-Chemical Hydrogen Processes: Thermo-Environomic Comparison and Optimization2012. p. 624-632. DOI : 10.1016/j.egypro.2012.09.072.
Enseignement & Phd
Doctoral Program in Energy
Doctoral Program in Chemistry and Chemical Engineering